müller f f used for sale

1 x Francis Shaw model K2A MK4 Intermix Machine number 11242.8, Year June 1994, NR2 rotors, Working batch volume 27 - 36 litres Drop door with linear actuator, SSA dust seals, Pneumatic hopper, Hansen semi unidrive gearbox, Rating 150kw, 1475/32rpm, With ASEA 152kW, 1510rpm DC variable speed motor and controls.

2 - K machine

We supply service and spare parts for seam and machining centers of the manufacturers Elumatec, Rapid, URBAN, Josting, MAW Nottmeyer and Actual. In particular, electronic components of the following machine types are constantly available. Machining centers / saegen: SLK 118, SBZ 122, SBZ 130, SBZ 131, SBZ 140, SBZ 150, DG 142, DG 204, DG 244, DGL 200, DGL 220, DGL 250, DGL 260, DGL 300 Welding machines URBAN, ACTUAL: AKS 6100, AKS 6105, AKS 6110, AKS 6600, AKS 6605, AKS 6610, AKS 6900, AKS 6910, AKS 6250 Plastering machines URBAN: SV 410, SV 410-B, SV 420, SV 430, SV 430-C, SV 530, SV 530-B, SV 530-C, SV 800, SV 815, SV 820, SV 840 Fluegel fitting machines FBA 2500, FBA 2502, FBA 2504 A machine-specific parameterization of the respective components is possible (software, firmware). We keep the following components constantly available: ferrocontrol IPC E500, E550, ...

Torque: 12 Nm volt: 144 V ampere: 11 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 x Farrel model F80 banbury internal mixer, Serial number: 996006, Year of manufacture: 1999 (new), Chamber volume 80litre, With 4 wing ST rotors, pneumatic hopper, hydraulic drop door dicharge with Linear actuator and spade latch, FYH hydraulic dust stops, Unidrive gearbox, With 600 HP DC variable speed motor and drive/SCR controller, Complete with hydraulic unit, Lubrication system, 3 Zone TCU and Farrel series 2000 operator panel. High spec mixer (fully hard chrome plated chamber and rotors). Previously used for PVC.

1 x Farrel Pomini model F160 Banbury internal mixer, Original year of manufacture: 1980, but rebuilt in 2000 (very good condition), Chamber volume: 160L Net batch size: 120kg, With 2 wing type rotors, Rotor tips hard material coated and fully chrome plated Rotor speed max 50rpm, pneumatic hopper, hydraulic drop door, FYH dust seals, Unidrive gearbox, With 435kw DC variable speed motor and electrical controls (415V). Complete and in good condition.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Torque: 23 Nm volt: 146 V ampere: 20 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Torque: 12 Nm volt: 145 V ampere: 15 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ampere: 20 A volt: 146 V Torque: 23 Nm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BERR filler SMB/Leibinger 18/6 with 18 filling valves and 6 head crown corker running direction: right-to-left year of manufacturing: 1989 with long filling valves/tubes with safety housing incl. CIP TULPS

working length: 4200 mm Working width: 2500 mm Working height: 850 - 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 GENKINGER dobby changing trolley type FDCT, year 2002 carrying capacity 400 Kg

Number of sanding units: 2 St. sanding width: 100,150 mm Sanding height max.: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The vertical milling center FADAL VMC 2216 FX was manufactured in 2007 by the FADAL concern in the USA. The machine is equipped with FANUC Oi-MC numerical control. The milling machine can process workpieces weighing up to 450 kilograms. Machine travels in the X, Y, Z axes are 550 mm, 400 mm and 500 mm, respectively. The spindle revolutions of the CNC milling machine reach 8000 rpm. The center has a warehouse for 21 tools. Perfect for working with single details as well as for larger-scale processing. Technical data of the FADAL VMC 2216 FX machining center - CNC control: FANUC Oi-MC - table length: 406 mm - table width: 990 mm - maximum weight of the workpiece: 450 kg - X axis travel: 550 mm - Y axis travel: 400 mm - Z axis travel: 500 mm - maximum spindle speed: 8000 rpm - tool magazine: 21 - handle: SK 40 - spindle motor power: 11.2 kW - power demand: 35 kVA - power o ...

The vertical milling center FADAL VMC 15XTL was manufactured in 2007 in the United States by the FADAL brand. The machining center is digitally controlled by Fadal. It has a table size of 870 x 400 mm. The milling machine is designed for processing materials weighing up to 340 kg. It is equipped with a magazine for 21 tools. The spindle speed of the machining center, on the other hand, reaches 7500 rpm. Technical parameters of the FADAL VMC 15XTL CNC milling machine - CNC control: Fadal - working table length: 400 mm - working table width: 870 mm - maximum table load (evenly distributed): 340 kg - number of tools in the magazine: 21 pcs. - spindle drive power: 5.6 kW - maximum rotary speed of the vertical spindle: 7500 1 / min. - minimum distance between the spindle and the table: 101.6 mm - maximum distance between the spindle and the table: 609.6 mm - travel length in th ...

Treif Felix CE dicer, performance 0,6t/h, 2 grid sets, cutting off knife. You are very welcome to test the machine in Koblenz, Germany.

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...

Conveyor belt system consisting of: 1 PCs. Bunker task band Above ground A A = 3500 mm Conveyor width = 1100mm Power 1, 5kW 1 PCs. Trail band A A = 4700 mm Conveyor width = 1100mm Discharge height 2800 mm incl. driver 40mm high Power 1 .1kw primed and painted More info and price on request

Used, in very good maintenance condition: complete frick/York freeze pump system for industrial use, consisting of the following main components: Frick/York XJS 120S, lifting volume 415 m3/h, screw compressor unit, designed with oil separator, thermosiphon oil cooler, electric motor Leroy Somer 90 kW.The specified cooling capacity of 74 kW is achieved with refrigerant R717 at -40 C/+35 C. 4 identical units available

Pester PEWO-fold 1 overwrapping machine for single cartons and carton collations, in OPP-, PVC-, PE-materials, with foil width from 90 mm to 300 mm, film thickness from 0.02 mm to 0.05 mm, maximum roll diameter 350 mm. Size range min. 60 x 60 x 20 mm, max. 400 x 350 x 140 mm, Machine controlled using ELAU/Schneider PacDrive, Electrical connection 3x400V, V+N+PE/50-60 Hz, connected load 5.2 kW/12.5A, Operating pressure 4 bar, compressed air 4 to 10 bar. Infeed height approx. 900 mm, outfeed height approx. 900-950 mm. Output up to 60 cycles/collations per minute. Includes: Infeed conveyor, 1100 mm long x 260 mm belt width, outfeed conveyor, 2000 mm long x 260 mm belt width, Alpha Compact labeller, PEWO-collect collating table, miscellaneous sets of format parts

Fessmann Turbomat 1800 RT, single trolley smoke house, electric powered, microprocessor control, smoke generator integrated in door You are very welcome to test the smoke house in our facility in Koblenz, Germany.

PRECAST LINE VOLLERT FILIGREE AND DOUBLE WALL LINE precast Filigree and double wall production

RECON Part number: 0210 5215 Counter clockwise ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

The surface inspection system is used for 100% control of films. It detects, classifies and logs optical errors with an uplight illumination (top plus bottom). - Modular architecture - Optimal lighting technology - Process synchronization - Real-time error analysis - Automatic error marking / label control - Different error views Circumference: - 2 inspection stations Each 2 x High Speed 80 MHz CCD line scan camera with 4096 pixels (18,000 scans/sec.) Lens adapter, lens, mounting kit and workstation software - Lighting 2 x high-clocked illumination fluorescence with cylindrical lens 2500 mm - Inspection frame - FSP 600 Server

Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850

Fessmann Turbomat 1800 RT, single trolley smoke house, electric powered, microprocessor control, smoke generator integrated in door. You are very welcome to test the machine in our facility in Koblenz, Germany.

56x76cm

38x56 cm

Thermo Fisher Scientific/Dionex Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analysis); 0.000 to 3,000 ml/min (capillary) Accuracy of flow rate: < 0.1% Precision of flow rate: < 0.1 % Gradient dosing accuracy and precision: ± 0.5% at 2 ml/min (analysis only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analysis); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 24.1 kg (55 lb.) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus Dual Pump 6Port Valve MXP9900-000 AFC-3000 Automated Fraction Collector RFC-10 Controller Condition: used Scope of delivery: (See pictures as pictured) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

Control cabinet for roller conveyor used from stock All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own ...

Fill 3D-Ultrasonic Cutter Here we offer you a Fill 3D ultrasonic cutting system. Fill 3D-ULTRASONIC SCHNEIDER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasonically excited cutting systems. Your advantages: Ergonomic feeding and unloading Easy creation of bleed programs (NC control) Space-saving system concept (as an alternative to the robot) High repeatability High process stability Easy and fast tool change Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with a small footprint and simple kinematics. Thanks to the Siemens 840 D CNC control, the trimming device can be programmed like a machine tool. Tool corrections or path changes can simply be carried out directly on the machine. As standa ...

General overhault Exchange engine DEUTZ/Lombardini F4M1008F/LDW1404 without starter, alternator, incl. Fuel-injection-system MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany Tel:0049(0)4281-950583 Fax:0049(0)4281-950585 info@miw-zeven.de MIW-Zeven

FMS SYSTEM: Machining Cell consisting of: Two 5-Axis machining Centres 8-Pool Pallet System(1250 x 1250mm x 3.000kg) Pallet Storage System X= 3.000 mm, Y= 2.000H/1.720V, Z= 2.000mm; A= 175°, B=0,001°; 640 Pos. ATC ; Spindle Taper HSK-A100; Spindle n= 3.000; Motor 50kW; Feeds: X,Y= 40m/min, Z= 30m/min Siemens 840D, Chip-conveyor; Serial No. 1450-03 and 1451-3, both from 2003 FR: À VENDRE MAINTENANTFMS SYSTEME ; 8 Pos. Piscine à palettes (1250 x 1250mm x3.000kg). 2x MCM Jet Five Mirror 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS, X= 3.000, Y= 2.000H/1.720V, Z= 2.000mm ; A= 175°, B=0,001° ; 640 Pos. ATC ; Cône de broche HSK-A100 ; Broche n= 3.000 ; Moteur 50kW ; Alimentation : X,Y= 40m/min, Z= 30m/minSiemens 840D, convoyeur à copeaux ; numéros de série 1450-03 et 1451-3, à partir de 2003

Exchange engine overhauled without starters, alternators, incl.fuel injection-system Lombardini LDW1404/Deutz F4M1008F MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring8 D-27404 Zeven Tel:0049(0)4281-950583 Fax:0049(0)4281-950585 miw-zeven.de info@miw-Zeven.de

FMS SYSTEM; Machining Cell consisting of: Two 5-Axis Machining Centres 12-Pool Pallet System (630 mm X 630 mm); Pallet Storage System X= 750 mm, Y= 860 mm, Z= 850mm; B= 0,001°; 334 Pos. ATC Spindle Taper HSK-A100; Spindle n= 11.000; Spindle 25 kW; Feeds 32.000mm/min; Chip-conveyor; Coolant System Serial No. 1283-01 (2001) Siemens 840D; and Coolant System Serial No. 1024-98 (1999) Siemens 840C FR: À VENDRE MAINTENANTFMS SYSTEME ; 12 Pos. Piscine à palettes (630 X 630mm) ; 2x horloge MCM 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS ; X= 750, Y= 860, Z= 850.mm ; A= .. ? ? B= 0,001° ; 334 Pos. ATC ; cône de broche HSK-A100 ; broche n= 11.000 ; broche 25 kW ; avance 32.000mm/min ; convoyeur à copeaux ; système de refroidissement n° 1283-01 (2001)Siemens 840D ; et système de refroidissement n° 1024-98 (1999)Siemens 840C

FRIGA SYSTEMS 6H-35.2Y Brand:FRIGA SYSTEMS, BITZER Type:6H-35.2Y Stock number:M22-1301 Cooling capacity:70.0 kW Application:Cooling Number of fans:6 Refrigerant:R449A, R452A Refrigerant Content:55 l Voltage:400 Volts Power consumption:22,5 kW Motor power:25 kW Dimensions:2600 x 1600 x 1670 mm Weight:863 kg Year:2009 Number in stock:1 piece(s) Price:Quotation request Description: Very nice Friga Systems condensing unit, equipped with a Bitzer 6 cylinder piston compressor, condenser (6 fans), fan speed controller, liquid vessel 55 liters and a switch box. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +40°C. Visit also our website: used-refrigeration

CONVEYOR BELT / CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! For many applications in industry, agriculture and for woodchips. On request we manufacture the conveyors / conveyor belts to your individual measurements. (All lengths, widths and designs possible) Available also with pimples, studs or textured surfaces. We ship worldwide we deliver worldwide, please ask for shipping costs!

POTATO BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry.