müller f f used for sale

10842025 Isobaric Filling Block Framax Modulblock RFCI for Glass Bottles The Framax Isobaric Modulblock RFCI 16/16/1 DPS/C Filler Block is suitable for bottling a wide range of carbonated products, including beer, kombucha, carbonated water, soft drinks, other sparkling beverages and still drinks. This filler block has been filling beer in 300ml and 500ml glass bottles with crown cap. Filling capacity is 2000 – 3000 depending on product, operation parameters are easily set up from HMI touch screen and controlled with Siemens PLC. Machine has been maintained regularly according to manufacture’s instructions and is in vey good condition. The bottling machine consists of: • A 16 clamp rotating rinser, featuring a single hot water sanitation cycle, • A 16 valve isobaric counterpressure filler with double air pre-evacuation using CO₂, • A single head crowner (crowning u ...

Attec Food Technology fully automatic pig cutting line consisting of: steel hanging line, dimensions: 6500 mm x 400 mm x 1700, Attec automatic primal cutting line, type: AGOL-850, order number: ON17163, year of construction: 2015, 400 V, 3 Ph, 50 Hz, 45 kW, capacity: 800 pigs/hr, product: pork carcasses, left & right, s/s outfeed belt for waste pork legs, belt width: 290 mm, automatic measuring system for precise and individual cuts of individual pork carcass, plastic belt, belt width: 800 mm, 1300 mm, 500 mm, 300 mm, 100 mm and s/s protection fence, total dimensions: 9800 mm x 4200 mm x 2200 mm. Line is never used.

Frey vacuum filling machine, type: Jobber 50, machine number: JA 50 18 10 99GU, year of construction: 1999, 400 V, 50 Hz, dimensions: 900 mm x 700 mm x 1600 mm.

Glass Bottle Filling Line foor Beer and CSD FRAMAX 3000 bph – 2017 This filling line used to fill beer in 330 ml glass bottles with crown caps. This complete line was delivered by Italian Framax in year 2017 and it has operated only about 2600 hours. It contains automatic depalletizer, self-adhesive labeller, tri-bloc bottling machine and carton box packaging machine. Bottling machine consist of 16 clamps rotating rinser with single hot water treatment, an isobaric 16 valve counterpressure filler with double air pre-evacuation with CO2 and a single head crowner. Filling vales are DPS type the product is spread along bottle sides by a rubber packing mounted on the levelling system. As soon as the product level reaches the hole on the levelling system the filling nozzle is shut off mechanically by a control cam. Filler has also a fobber unit for foaming in order to reduce any oxygen  ...

CONTROLS    PNEUTRONIC CYBELEC STEUERUNG PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   quick die change system: no   feedstock transport direction: left to right SLIDE   total force (nominal): 400 to   stroke: 230 mm   stroke rate (max.): 35 /min SLIDE (HYDR. PRESS)   approximation velocity max.: 120 mm/s   working velocity min.: 5 mm/s   working velocity max.: 50 mm/s   return velocity max.: 135 mm/s COUNTER RAM   nominal force: 100 to   stroke: 40 mm V-RING   nominal force: 200 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 1050 mm   lower table (front-back): 800 mm   upper table (left-right): 800 mm   upper table (front-back): 800 mm   shut height max.: 410 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 350 mm   sheet thickness max.: 16 mm   feeding step min.: 1 mm   fee ...

Jungheinrich charging station for industrial trucks 2 x charging station, maintenance stand for battery maintenance If you use electric industrial trucks in your business, they rely on accumulators or batteries as an energy source. With the installation of a battery charging station, you benefit from a compact solution that significantly simplifies the charging of batteries. The system serves as a charging station for industrial trucks (such as forklifts). It has two charging bays with Tecna spring balancers that hold the charging cables in place. Construction: The yellow steel structure includes a metal frame with integrated ram protection on the ground to protect the system from damage by vehicles. Spring balancers are mounted at the top, which enable ergonomic handling of heavy cables. Jungheinrich battery charging station for ground mounting Year of manufacture: ...

PIOVAN Three-phase F32 feeder- 1,3kw Model : F32 Year : 1996 With holding hopper 1 Pallet Dimensions (L x W x H) : 1,20m x 0,80m x 0,80m Weight : 120 kg

General SKU309N504 MakeFalk Gmbh&Co KG No.24320 Year of construction2007 Mounted on legscheck Material Shell materialStainless steel 1.4571 (316Ti) Tube materialStainless steel 1.4571 (316Ti) Pressure Working pressure shell0.49 Bar Working pressure tubes6 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface25 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Notified bodyAD2000 Heating surface25m2 Tube capacity140 Ltr Number of tubes:64 Tube diameter25,4mm Tube length5000mm Wall thickness tubes1,6mm Max. temperature60 degr.C. Shell capacity317 Ltr Shell diameter356mm Shell length5000mm Max. temperature100 degr.C. Shell connectionsdn65 Cover connections(2x)dn80 Information LocationBarneveld Floorspace5,7x0,7 M Total height1,0 M Weight800 KGCatalysts & fillersShell and tube hea ...

General SKU404U1204 MakeEdelstahl Maurer LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume130 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity130 Ltr. Vessel sizesdia. 500x668 mm Dished bottomcheck Top connectionsDN50 (2x) Outletdia. 33 mm With jacket11 Ltr. Max. temperature-15/150 ºC With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, (Ex) Speed mixing shaft187 rpm Stainless Steel Reactors MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information No.208.09.006-05 Year of construction2009 Floorspace0,75x0,75 mtr Total height1,40 mtr Weight270 kg Extra SpecificationsRa ≤ 0,6 µm Catalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmetics ...

General SKU404U1205 MakeEdelstahl Maurer LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume167 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck Capacity167 Ltr. Vessel sizesdia. 500x868 mm Dished bottomcheck Top connectionsDN50 (2x) Outletdia. 33 mm With jacket18 Ltr. Max. temperature-15/150 °C With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, 1385 rpm, (Ex) Speed mixing shaft187 rpm Information No.208.09.006.28 Year of construction2009 Floorspace0,75x0,75 m Total height1,5 m Weight310 kg Extra SpecificationsRa ≤ 0,6 µm Catalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosm ...

General SKU066A334 MakeHalvor Forberg A/S Larvik Norway TypeFT-200 No.S12-94 Year of construction1994 Mounted on framecheck Main Features MaterialStainless steel Volume200 Ltr. Motor5.5 KW Specified Features - Paddle mixer MaterialStainless steel 1.4301 (304) Paddle mixercheck Double shaftcheck Useful capacity200 Ltr. Trough sizes1000x850x950mm ManholecheckInspection hatch 785x410mm OutletDia. 220 mm Motor5,5 KW, 380/660 Volt Information LocationBarneveld Floorspace 1,7x1,6 m Total heightmixer without filter 2,5m Weight2250kg Extra Specifications- Equipped with Forbergs PMS Pin Mill System = 2 high speed rotating shafts with welded pins - Heat exchanger and fan are missing - With nozzles for liquid injection - :With envelope filters Catalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectioneryPaddle mixersSolid pha ...

General SKU312X492 MakeALLGAIER PROCESS TECHNOLOGY GmbH LocationBarneveld CEcheck TypeWS-R-V-T-2.80-0.50-0.30 Main Features MaterialStainless steel Motor11 KW Surface2.8 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Continuous operation, pressure/suction mode Product inletø 150 Product outletø 200 Number of sections:3 Air inlet2x ø 400: 2x ø 80 (warm air blending) Air outlet3x ø 250 Vibro motorcheck Motor11 kW (400 V 1475/477 rpm) With variable speed drivecheck With fancheck Motorcheck Capacity500 kg/h wet product With cyclonecheck Heating unit (oil)check (Thermal oil: Heat Exchanger) Max. temperatureApprox. 170 °C: inlet air MaterialStainless steel 1.4301 (304) Information No.380 Year of construction2013 Mounted on mild steel framecheck Floorspace3,9 x 2,25 m Total height2,9 m Extra Specifications Not suitable  ...

General SKU104W505 MakeMorton Machines TypeFKM-900D No.M24052 Year of construction12/´94 LocationBarneveld Pressure Working pressure jacket5.5 Bar Main Features MaterialStainless steel Volume900 Ltr. Motor75 KW Specified Features - Powder turbo mixer Powder turbo mixer(1x) Capacity900 Ltr Trough sizesdia. 790x1840mm Top connectionsdia. 150mm + dia. 250mm + dia. 345mm Inspection hatch540x400mm (1x) Outlet160x120mm (2x) + dia. 100mm With jacketcheck Max. temperature162 Degr. C. With adjustable packing glandscheck Motor75,0 KW, 380 Volt (Ex) Speed mixing shaft± 115 Rpm MaterialStainless steel 1.4401 (316) Information ATEX compatiblecheck Extra Specifications-- RECONDITIONED -- Catalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowder tur ...

General SKU079G410 MakeADM Chaudronnerie S.A. Vaulx en Velin No.425 A/B / IMM 96679 Year of construction1995 LocationBarneveld Pressure Working pressure4.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor Reactor(1x) Capacity11.000 Ltr Vessel sizesdia. 2400x1500mm Conical bottom(1500mm) Dished top sidecheck Manholedia. 500mm Top connections3x dia. 250mm Outletdia. 150mm Half coil jacketed(415 Ltr) Max. temperature-20/+160 Degr. C. With paddle stirrercheck Motor15,0 KW, 220/380 Volt (Ex) Speed mixing shaftvariable Stainless Steel Reactors MaterialStainless steel 1.4539 (904L) Information Floorspace2,7x2,7 M Total height5,5 MCatalysts & fillersSolventsDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceu ...

General SKU053T220 MakeFiltroba Technik AG Mach.No.2020 Year of construction1992 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Motor3 KW Surface0.25 m2 Specified Features - Nutsche filter Nutsche filter/dryerHelical filter dryer Filter surface0,25 M2 Capacity26 Ltr Vessel sizesDia: 350x300mm Plate sizesDia: 350mm With jacket(2 Ltr) Max. temperature160°C With stirrercheck Motor3,0 KW, 220/380 Volt (Ex) With variable speed drivecheckVar-Spe Type: 2115/100/04 Cake capacity7,5 Ltr MaterialStainless steel 1.4571 (316Ti) Information Mounted on frame(stainless steel) LocationBarneveld Mounted on wheelscheck With switchcheck(as is) Floorspace1,5x0,8 M Total height1,7 M Weight450 KG Extra Specificationsupper mechanical seal has been overhauled Catalysts & fillersFeed additivesDiscountDeter ...

General SKUR1416 MakeAEG vibrationtechnik LocationBarneveld CEcheck TypeKF 12-2 Main Features MaterialStainless steel Length1150 mm Width300 mm Specified Features - Vibro feeder Vibro feedercheck Feeder width300mm Feeder length1150mm Closedcheck InletDia. 340mm OutletDia. 250mm With vibro motorcheck With motor2,2A, 230Volt, 3000rpm Without controlscheck MaterialStainless steel Information No.540954 001 Year of construction1995 Floorspace1,20x0,40 m Total height0,60 m Weight100 kg Extra SpecificationsLoad cap. 12,2 kgCatalysts & fillersSolventsDetergent & surf.CosmeticsOrganicsVibro feedersLubricants & oleoConfectioneryDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicPlastic & polymersAgrochemicalsBiotechnologyRubberOther chemicalFine chemicalsPowdered foodsPaints & coatings-Industries > Chemical > Catalysts & fillersIndustries > Chemical > SolventsIndust ...

General SKU300U604 MakeBohle LocationBarneveld CEcheck TypeBFS15 Main Features MaterialStainless steel Volume30 Ltr. Motor15 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck With pan mounted on wheelscheck CapacityNetto 30Ltr. (bruto 45Ltr.) Pan sizesDia. 350x400 mm Capacityca. 62 kg/h With fancheck Capacity750m³/h Motor15kW, 400/690Volt, 2940rpm (EX) With dust filtercheck Filter surface2,2m² Cleaning with air pulsecheck MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 (316L), Stainless steel 1.4435(316L), Stainless steel 1.4462 (Duplex2205), Stainless steel 1.4571 (316Ti) Information No.08110 Year of construction2008 With switchgearcheck Total height+/- 3,5m Weight+/- 3500kg ATEX compatiblecheckCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsOther feedSolid pharmaceuticsDyes & pigmentsBiopharmaceutic ...

General SKU266U441 MakeBioengineering TypeLP351 No.D574 Year of construction1988 Mounted on legscheck Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume50 Ltr. Motor4.9 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity50 Ltr. (max. 75 Ltr.) Vessel sizesdia. 345x870 mm Dished bottomcheck Top connectionsdia. 80mm, 20mm (7x) Outletdia. 20 mm With jacketcheck 15 Ltr. Max. temperature150 °C With propellor stirrercheck (double) Rushton-turbine Motor4,9 kW, 260 volt, 3250 rpm Speed mixing shaft1083 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information LocationBarneveld With switchcheck With switchgearcheck (as is) Floorspace0,8x0,85 m Total height1,9 m Weight450 + 220 + 210 kg Extra SpecificationsThis is a st ...

General SKU412U1294 MakeFryma Koruma Disho LocationBarneveld TypeV100/45 Pressure Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume45 Ltr. Motor5.5 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity45 ltr Vessel sizesDia. 500x420mm ( polished inside) Conical bottomcheck Dished top sidecheck With covercheckDia 500mm Top connectionsInlet dia. 325mm ( with hopper) OutletDia. 30mm With jacketcheck Volume 5,2 ltr, pressure 6 bar, allowable temp 180°C Max. temperature180°C With anchor stirrercheck with scraper Motor0.25kW, 220/380Volt, 1380rpm With homogenisercheck Dia. 100mm, 0-5000rpm Motor5,5kW, 0-270Volt, 0/5000rpm MaterialStainless steel 1.4571 (316Ti) Information No.4.027 Year of construction1988 Mounted on legscheck With switchgearcheck Floorspace1,4x1,35 m Total height1,45 m W ...

General SKU074S263 MakeSeitz Wega TypeEFT 30.52 Mach.No.13449 Year of construction1982 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Motor0.75 KW Surface0.1 m2 Specified Features - Nutsche filter Nutsche filter/dryer(1x) Filter surface0,07 M2 Capacity55 Ltr. Plate sizesDia. 300mm Vessel can be tiltedcheck With jacket(15+0,5 Ltr.) With stirrercheck Motor0,6/0,75 KW, 380 Volt, Ex With variable speed drivecheck Stirrer speed5-25/10-50 Rpm Stirrer can be liftedcheck MaterialStainless steel 1.4571 (316Ti) Information Mounted on framecheck LocationBarneveld Floorspace1,9x1,3 M Total height2,7 M Weight850 KgCatalysts & fillersFeed additivesDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoAnimal feedOther feedConfectionerySolid pharma ...

General SKU397M459 MakeV.R.V. s.p.a. Milano Italy LocationBarneveld CEcheck Type4/20 Main Features MaterialStainless steel Volume250 Ltr. Motor15 KW Specified Features - Paddle dryer Paddle dryerFlash dryer Continuouscheck Capacity± 250 Ltr ( bruto) Trough sizesdia. 400 mm Inletdia. 100 mm Outlet+/- 190x100mm With jacketcheck Motor15 KW 380 Volt MaterialStainless steel 1.4306 (304L) Information No.B 205 Year of construction1996 Mounted on framecheck Floorspace3,8x1,7 M Total height1,5 M Weight2600 KGCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicAgrochemicalsBiotechnologyPaddle dryersOther chemicalStarchFine chemicalsOintmentsGeneric medicinesPowdered foodsVRVIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed ad ...

General SKU213S047 MakeLoedige (D) LocationBarneveld TypeFKM1200D.3Z Main Features MaterialMild steel Volume1200 Ltr. Motor24 KW Specified Features - Powder turbo mixer MaterialMild steel Lödige mixercheck Capacity1200 ltr. Useful capacity400-850 ltr. Trough sizesdia. 950x1700mm Inlet330x330mm (1x) dia 240mm (1x) Inspection hatch(2x) 540x380mm Outlet240x180mm Motor24 kW (380 V, 1475 rpm (Ex)) With lump breaker(2x) Motor4,6 kW 380 Volt Speed lumpbreaker2930 rpm Information No.6080 Year of construction1971 Floorspace3,5x1,8 M Total height1,4 M Weight2200 KgCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowder turbo mixersSpicesOther chemicalStarchTea, herbs & coffeeGeneric medicinesPowdered foodsLoedigeIndustries > Chemical > Catalysts & fill ...

General SKU008Y104 MakeRosenmund AG Liestal TypeRND 0,6-262-81 Mach.No.2250 Year of construction1981 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Motor5.5 KW Surface0.6 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,6 m² Capacity485 l. Vessel sizesø 876 x 620 mm With jacketcheck 14 l. Max. temperature200 °C With stirrercheck With variable speed drivecheck Hydraulic drivecheck Motor5,5 kW 380V 1445 rpm (Ex) With hydraulic unitcheck MaterialStainless steel 1.4435 (316L) Information Mounted on framecheck LocationBarneveld With switchgearcheck (as is) Floorspace1,9x1,2 m Total height2,0 mCatalysts & fillersFeed additivesDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuticsBiophar ...

General SKU100P664 MakeDidier Filtertechnik TypeDN 1200 Mach.No.SL-7196 Year of construction1988 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Motor2.2 KW Surface1.1 m2 Specified Features - Nutsche filter Nutsche filter(1x) Filter surface1,13 M2 CapacityVessel 1400 Ltr. Plate sizesDia. 1200mm, Liquid outletDia. 80mm Max. temperature200 Dgr.C. With stirrerStirrer with hydraulic lifting Motor2,2 KW, 220/380 Volt (Ex) With variable speed drivecheck MaterialStainless steel 1.4571 (316Ti) Information Mounted on legscheck LocationBarneveld Floorspace1,6x1,6 M Total height3,9 M ATEX compatiblecheckCatalysts & fillersFeed additivesDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuticsBiopharmaceuticalAPIMinerals & inorganicAgrochemicalsBiotechnolo ...

General SKUR0823 MakeCMR Brevetti Ravinet (Ita) Type16900 ltr Mach.No.1998 Year of construction1988 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Motor15 KW Surface8 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface8 m2 Capacity16900 ltr Vessel sizesdia.3300 x 2250mm Top connections2x DN600, DN200, 4x DN80, 2x DN40 Solids outletDN100 Liquid outlet10x DN40 With jacket(70 ltr) Max. temperature-30/200 degr.C With stirrercheck Motor15 kW, 380 Volt (EX) Stirrer speed8 rpm Cake capacity4000 Ltr Stirrer can be liftedcheck MaterialStainless steel 1.4435 (316L) Information LocationBarneveld Floorspace4,0x4,0 M Total height5,0 M Weight8000 Kg ATEX compatiblecheckCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants  ...

General SKUR0822 LocationBarneveld MakeCMR Brevetti (Ita) Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialHastelloy Motor11 KW Surface4 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface4 m2 Capacity5500 ltr Vessel sizesdia. 2270 x 1800 mm Top connectionsDN 125 (1x), DN 50 (3x), DN 40 (1x), DN 80 (4x)dia. 500 mm (manway) Solids outletdia. 490 mm Liquid outletdia. 50 mm With jacket(700 ltr) Max. temperature-30/200 degr.C With stirrercheck Motor11 kW 380 Volt (Ex) Stirrer can be liftedcheck MaterialStainless steel 2.4610 (Hastelloy C-4) Information TypeHC4 Mach.No.2015 Year of construction1989 Mounted on legscheck Floorspace3,1 x 3,1 M Total height4,6 M Weight7900 Kg ATEX compatiblecheckCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsOrgani ...

General SKU005X005 MakeFIB Leeuwarden No.1573-03 Year of construction1991 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume3840 Ltr. Motor3 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity3840 l. Vessel sizesø 1800 x 1400 mm Dished bottomcheck Dished top sidecheck Manholeø 500mm Top connectionscheck 11x Outletø 100 mm With jacketcheck 300 l. Max. temperature—10 / 50 °C With paddle stirrercheck make Jongia type LBM-60 Motor3,0 kW, 380/660 Volt (Ex) Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information LocationBarneveld Floorspace2,0x2,0 m Total height4,2 m ATEX compatiblecheckCatalysts & fillersSolventsDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigments ...

General SKU256W337 MakeSulzer LocationBarneveld CEcheck TypeUV. 14m2 Pressure Working pressure shell10 Bar Vacuum possible shellcheck Working pressure tubes8 Bar Main Features Shell (Material)Stainless steel Tube (Material)Hastelloy Surface14 m2 Specified Features - Falling film evaporator MaterialStainless steel 1.4571 (316Ti), Stainless steel 2.4602 (Hastelloy C-22) Falling film evaporators Heat exchangercheck Verticalcheck Heating surface14m2 Tube capacity276 l. Tube length1400 mm Max. temperature-10°C/+200°C Shell capacity180 l. Shell diameter500 mm Shell length2400 mm Max. temperature-10°C/+200°C Shell connectionsDN270 and DN200 Cover connectionsDN150 Information No.11083 Year of construction2012 Floorspace1,10x1,10 m Total height2,50 m Weight560 kgCatalysts & fillersFeed additivesPaper & otherSolventsFalling film evaporatorsDetergent & surf.Ot ...

General SKU345S753 MakeHinke Tankbau GmbH (AT) LocationBarneveld CEcheck Pressure Working pressure3.5 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume2000 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity2000 Ltr (2940 Ltr) Vessel sizesdia.1400x1500 mm Dished bottomcheck Dished top sidecheck ManholeDN500/400 Top connectionsDN200, DN150, DN100,, DN80, DN50 OutletDN50 Half coil jacketed(66+18 Ltr) Max. temperature-25/200 °C With paddle stirrercheck dubble Motor5,5 kW 400/690 Volt (Ex) Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.8290 Year of construction2000 Floorspace1,9x1,9 m Total height4 m Weight1400 kg ATEX compatiblecheckCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & ...

General SKU362W983 MakeFas Förderanlage TypeA250 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor1.5 KW Length2500 mm Inlet diameter200 mm Specified Features - Vertical screw conveyor MaterialStainless steel 1.4301 (304) Vertical conveyor screws Horizontal conveyor screwcheck Trough-typecheck Vertical conveyor screwcheck Trough-modelcheck Diameter250mm Length2500 Between inlet and outlet2100 mm Shaft diameter100 mm Pitch190 mm InletDia. 200 mm OutletDia. 200 mm With adjustable packing glandscheck Motor1,5 kW, 230/400 volt, 1405 rpm Screw speed80 rpm Conveying height± 2000 mm With coverscheck Information No.02/02/45 Mach.No.02/02/45 Year of construction2002 Floorspace3,90 x 0,60 m Total height0,70 m Weight390 kgCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & met ...

General SKU296W564 MakeLoedige LocationBarneveld TypeFKM 600D2Z Main Features MaterialStainless steel Volume600 Ltr. Motor30 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-arms5 Capacity730 l Useful capacity600 l Trough sizesDia. 780 x 1200 mm Top connectionsDia. 250/300 mm Inspection hatch(2x) 450x380 mm Outlet240 x 180 mm Glands air purgedcheck Motor30 kW, 380/660 volt, 1460 rpm Speed mixing shaft134 rpm With lump breaker2x Motor5,5 kW, 220/380 volt Speed lumpbreaker2910 rpm MaterialStainless steel 1.4301 (304) Information No.5080 Year of construction1969 Mounted on framecheck Floorspace3,3 x 1,5 m Total height2,5 m Weight2260 kgCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowder turbo mixersSpicesOther chemical ...

General SKU260W357 LocationBarneveld MakePiab Main Features MaterialStainless steel Specified Features - Powder filler MaterialStainless steel 1.4435 (316L) Powder fillercheck Vacuum fillercheck Capacity9 ton/h Information TypeVCP 1200-AF/v.v.C-PA Year of construction2000 Floorspace0,70x0,70 m Total height1,80 m Weight65 kg Extra SpecificationsPIAB vacuum conveyor Catalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicPowder fillersPlastic & polymersSpicesBiotechnologyOther chemicalStarchFine chemicalsTea, herbs & coffeeOintmentsGeneric medicinesPowdered foodsPiabIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > CosmeticsIndustries >  ...

General SKU045C405 MakeHalvor Forberg A/S Larvik TypeF-1000 No.1904 Year of construction1997 LocationBarneveld Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume1000 Ltr. Motor30 KW Specified Features - Paddle dryer Paddle dryer(1x) Double shaftcheck Capacity3500 Ltr, Useful capacity 1000 Ltr Trough sizes1350x1695x1400mm InletDia: 300mm ManholeFull acces via door OutletDia: 590mm With jacketcheck 31 Ltr. Max. temperature150°C With adjustable packing glandscheck Motor30 KW, 380/660 Volt Speed mixing shaft± 32 Rpm MaterialStainless steel 1.4401 (316) Information Floorspace3,7x2,3 M Total height3,4 M Weight10.000 KG Extra Specifications-- RECONDITIONED -- Catalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuti ...

General SKU215W150 LocationBarneveld CEcheck MakeFansider Main Features Motor1.1 KW Length2100 mm Inlet diameter160 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter160 mm Length2100 mm Between inlet and outlet1510 mm Shaft diameter90 mm Pitch100 mm Inlet580 x 160 mm OutletDia. 160 mm Motor1,1 kW, 400V, 1435 rpm Screw speed23 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Information TypeCT168 Mach.No.21443 Year of construction2022 Floorspace3,45 x 0,80 m Total height0,40 m Weight410 kg Extra SpecificationsCap. Approx 1800 l/hCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalA ...

General SKU424U1351 MakeMorton LocationBarneveld TypeFKM 1600 Pressure Working pressure jacket1.5 Bar Main Features MaterialStainless steel Volume1600 Ltr. Motor15 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-armscheck Capacity1600 ltr. Trough sizes1100x1700 mm InletDia. 200 and 80 mm Inspection hatchcheck Outlet240x180 mm With jacketcheck Max. temperature112°C With adjustable packing glandscheck Motor15 kW, 415Volt, 1460rpm Speed mixing shaft155rpm With lump breakercheck 3x Motor4kW, 400/690Volt, 2870rpm (3x) Speed lumpbreaker2870 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4408 Information No.M 23556 Year of construction7/1987 Floorspace3,25x1,60 m Total height1,50 m Weight2590 kg Technical specs Extra informationAllowable temp 112°CCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesS ...

General SKU319N469 LocationBarneveld MakeDVA Deutsche Vakuum Apparate TypeRWN 1200-Z Pressure Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Motor2.5 KW Surface1 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface1,0 m² Capacity500 l (750 l brutt) Vessel sizesø 1300 x 700 mm Plate sizesø 1300 mm Solids outletScrew ø100mm Liquid outlet50 mm With jacketcheck (15 l) Max. temperature120 °C With stirrercheck Motor2,5 kW (380 V, 1415 rpm (Ex)) Stirrer speed± 30 rpm Stirrer can be liftedcheck hydraulic MaterialStainless steel 1.4581 (348) Information Mach.No.132 527 10 Year of construction1983/94 Mounted on framecheck Floorspace2,5 x 2,5 m Total height3,5 m Weight2500 kg ATEX compatiblecheckCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleo ...

General SKU229P219 LocationBarneveld MakeMBR Bio Reactor AG Switzerland TypeLabor 7 Ltr No.425 Pressure Working pressure1.5 Bar Main Features MaterialStainless steel/Glass Volume7 Ltr. Specified Features - Stainless Steel Reactor ReactorLabor Bioreactor Capacity7 Ltr. Half coil jacketedcheck Max. temperature125°C. With paddle stirrercheck Motor220/380 Volt Speed mixing shaft0-1000 rpm Stainless Steel Reactors MaterialGlass, Stainless steel Information Year of construction1988 With switchgearcheckMCS 10 Floorspace+/- 1,2x0,7 m Total height1,5 m Weight300kg Extra Specificationswith reflux cooler and extra partsCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicPlastic & polymersAgrochemicalsRubberOther chemicalFine chemicalsStainless Steel ReactorsOintmentsGen ...

General SKU305U627 LocationBarneveld CEcheck MakeStarick Fördertechnik GmbH Main Features Motor4 KW Length9520 mm Inlet diameter200 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Trough-typecheck Diameter219 mm Length9520 mm Between inlet and outlet7878 mm Shaft diameter133 mm Pitch185 mm InletDN200 OutletDN200 With jacketcheck (cooling) 6000mm long Max. temperature100°C With adjustable packing glandscheck Motor4kW, 400/690 Volt, 1452rpm Screw speed12/25 rpm Information TypeRFS-200/SoK Mach.No.1821.2694.01.05 Year of construction2005 Floorspace9.0x0,5 m Total height0,5 m Weight900 kg ATEX compatiblecheck Extra Specificationswith new motor and gearboxCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additive ...

General SKU300U889 MakeGlatt GmbH LocationBarneveld TypeTFN30 Main Features MaterialStainless steel Volume100 Ltr. Motor7.5 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck (3x) With pan mounted on wheelscheck Capacity100 Ltr. (30-60kg) Pan sizesDia. 500x300 mm Capacity100 Ltr. Can be heated by steamcheck 3bar, 50.000 Kcal/h With fancheck Capacity1500m³/h Motor7,5kW, 380Volt, 2920rpm With dust filtercheckinlet filter and outlet filter Filter surfaceinlet filter: unknown, outlet filter:4m² Mechanical cleaningcheck With timercheck MaterialStainless steel 1.4301 (304) Information No.4428 Year of construction1985 With switchgearcheck( as is) Floorspace3,2x2,3 m Total height3,1 m Weight1600 kgCatalysts & fillersFeed additivesOther pharmaceuticsOther feedSolid pharmaceuticsMinerals & inorganicFluid bed dryers batchOther chemicalSt ...

General SKU098N558 MakeLödige TypeFKM-8000D No.4546 (vessel no. 404) Year of construction1968 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume8000 Ltr. Motor33 KW Specified Features - Powder turbo mixer Paddle dryer(1x) Capacity8000 l Trough sizesdia. 1580 x 4000 mm Inletdia. 500mm + dia. 400mm + dia. 200mm Outletdia. 150 mm With jacket(550 l) Max. temperature215°C Motor33 kW, 500 Volt Speed mixing shaft± 23 rpm Powder turbo mixers MaterialStainless steel 1.4541 (321) Information Floorspace6,8 x 1,9 m Total height2,6 m Extra SpecificationsTop connections dia. 500 mm + dia. 400 mm + dia. 200 mm Catalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicPowder turbo mixer ...

General SKU391T1168 MakeJöst LocationBarneveld TypeRUF Main Features MaterialStainless steel Length1320 mm Width250 mm Specified Features - Vibro feeder MaterialStainless steel 1.4305 (303) Vibro feedercheck Feeder diameter250 mm Feeder length1320 mm Closedcheck With hoppercheck InletDia. 265 mm OutletDia. 190 mm With vibro motorcheck With motor 0,40 kW, 400 volt, (2x) Without controlscheck Information No.0871679 Year of construction2008 Mounted on framecheck Floorspace1,40x1,05 m Total height1,4 m Weight230 kg ATEX compatiblecheckFeed additivesSugarVibro feedersAnimal feedOther feedMinerals & inorganicPowdered foodsJöstIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > SugarConveying systems > Vibro feedersIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedIndustries > Chemical > Minerals & inorganicIndustries > Foo ...

General SKU305U634 LocationBarneveld CEcheck MakeHaver & Boecker Type1 WXEH- (U) Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialStainless steel 1.4301 (304) Powder fillercheck Bag fillercheck Pneumatic fillingcheck Number of dosing heads:1 Dosing15 and 20 kg (max. 50 kg) Capacity30-100 bags/hour a 15 and 20 kg With motor 7,5 kW, 400 volt, 1500 rpm (EX) With hoppercheck Hopper sizesDia. 400x640 mm With mixer in hoppercheck Information No.51/246325/01 Year of construction2005 Mounted in framecheck With switchgearcheck Floorspace1,4 x 1,8 m Total height2,1 m Weight800 kg ATEX compatiblecheckPowder fillersPowdered foodsHaver & BoeckerPackaging machines > Powder fillersIndustries > Food & Feed > Powdered foodsBrand > Haver & Boecker What you can expect from Foeth: -- Machine is in working condition -- At a reduce ...

General SKU404U1206 MakeEdelstahl Maurer LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume167 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity167 Ltr. Vessel sizesdia. 500x868 mm Dished bottomcheck Top connectionsDN50 (2x) Outletdia. 33 mm With jacket18 Ltr. Max. temperature-15/150 °C With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, 1385 rpm, (Ex) Speed mixing shaft187 rpm Stainless Steel Reactors MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information No.208.09.006.29 Year of construction2009 Floorspace0,75x0,75 m Total height1,5 m Weight310 kg Extra SpecificationsRa ≤ 0,6 µm Catalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosm ...

General SKU404U1202 MakeEdelstahl Maurer LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume130 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity130 Ltr. Vessel sizesdia. 500x668 mm Dished bottomcheck Top connectionsDN50 (2x) Outletdia. 33 mm With jacketcheck 11 Ltr. Max. temperature-15/150 ºC With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, (Ex) Speed mixing shaft187 rpm Stainless Steel Reactors MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information No.208.09.006-10 Year of construction2009 Floorspace0,75x0,75 m Total height1,40 m Weight270 kg Extra SpecificationsRa ≤ 0,6 µm Catalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeti ...

General SKU404U1201 MakeEdelstahl Maurer LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume130 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity130 Ltr. Vessel sizesdia. 500x668 mm Dished bottomcheck Top connectionsDN50 (2x) Outletdia. 33 mm With jacket11 Ltr. Max. temperature-15/150 ºC With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, (Ex) Speed mixing shaft187 rpm Stainless Steel Reactors MaterialStainless steel 1.4404, Stainless steel 1.4435(316L) Information No.208.09.006-08 Year of construction2009 Floorspace0,75x0,75 m Total height1,40 m Weight270 kg Extra SpecificationsRa ≤ 0,6 µmCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrgani ...

General SKU404U1214 MakeEdelstahl Maurer LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume130 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck Capacity130 Ltr. Vessel sizesdia. 500x668 mm Dished bottomcheck Top connectionsDN50 (2x) Outletdia. 33 mm With jacket11 Ltr. Max. temperature-15/150 ºC With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, (Ex) Speed mixing shaft187 rpm Information No.208.09.006.02 Year of construction2009 Floorspace0,75x0,75 m Total height1,4 mtr Weight270 kg Extra SpecificationsRa ≤ 0,6 µm Catalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrg ...

General SKU404U1211 MakeEdelstahl Maurer LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume130 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck Capacity130 Ltr. Vessel sizesdia. 500x668 mm Dished bottomcheck Top connectionsDN50 (2x) Outletdia. 33 mm With jacket11 Ltr. Max. temperature-15/150 ºC With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, (Ex) Speed mixing shaft187 rpm Information No.208.09.006-06 Year of construction2009 Floorspace0,75x0,75 m Total height1,4 m Weight270 kg Extra SpecificationsRa ≤ 0,6 µm Catalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrgan ...

General SKU404U1212 MakeEdelstahl Maurer LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume167 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity167 Ltr. Vessel sizesdia. 500x868 mm Dished bottomcheck Top connectionsDN50 (2x) Outletdia. 33 mm With jacket18 Ltr. Max. temperature-15/150 °C With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, 1385 rpm, (Ex) Speed mixing shaft187 rpm Stainless Steel Reactors MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information No.208.09.006-27 Year of construction2009 Floorspace0,75x0,75 m Total height1,5 m Weight310 kg Extra SpecificationsRa ≤ 0,6 µm Catalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosm ...

General SKU404U1213 MakeEdelstahl Maurer LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume130 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity130 Ltr. Vessel sizesdia. 500x668 mm Top connectionsDN50 (2x) Outletdia. 33 mm With jacket11 Ltr. Max. temperature-15/150 ºC With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, (Ex) Speed mixing shaft187 rpm Stainless Steel Reactors MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information No.208.09.006-01 Year of construction2009 Floorspace0,75x0,75 m Total height1,4 m Weight270 kg Extra SpecificationsRa ≤ 0,6 µm Catalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleo ...

General SKU300U900 MakeDott. Bonapace LocationBarneveld CEcheck TypeMC-50 Main Features MaterialStainless steel Specified Features - Powder filler MaterialStainless steel 1.4401 (316) Powder fillercheck Information No.01/04 Year of construction2004 With switchcheck Floorspace0,65x0,33 m Total height0,39 m Weight70 kg Extra Specifications50 cycles, Multigel vibrator unit, type MC100, 230 volt comes with :various plates. Powder fillersGeneric medicinesDott. BonapacePackaging machines > Powder fillersIndustries > Pharmaceutical > Generic medicinesBrand > Dott. Bonapace What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!