müller f f used for sale

Offer 26127 Technical data approx.: - Load capacity approx. 3000 kg - Loading area between side stanchions L 4.00 x D 0.94 m - Loading area without. Side stanchions L 4.00 x D 1.04 m - Loading height approx. 0.7 m - Stake height 0.5 m - Drawbar length 1.1 mm - Length with drawbar approx. 5.9 m - Drawbar can be mounted on both sides - Width approx. 1.1 m - Weight approx. 450 kg - Tyres air 460 x 140

Excellent condition - Fully operational - Loading / Transport possible! The WDN0004 automatic edgebander has been designed for the hot use of pre-glued tapes for finishing linear and shaped panels. Thanks to this technology, the thickness between the edge and the panel is practically non-existent, allowing an excellent finish. Quick to register and start. In just 2 minutes the machine is ready to work. Product of the Italian brand Freutek, it is made with a scratch-resistant worktop and sturdy sheet metal structure, equipped with an automatic feeder. With double scrapers for a clean and glue-free result. Automatic facing of the front and rear excess edge. Equipped with auxiliary rollers located on the working base to obtain an optimal pressure of the panel on the gluing unit. it is equipped with a powerful 3.59 Kw motor for working. The Freutek WDN0004 is complete with protection agai ...

General SKU057G241 MakeAlfa Laval Sweden TypeFESX-412B-35/4000-66 No.2947617 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Capacity75000 Ltr./Hr. Motor37 KW Specified Features - Separator Separatorcheck Capacity75.000 l/h Motor37,0 kW, 380-415 Volt Max. rotor speed1420-1500 / 1700-1800 rpm InletDia. 89 mm Liquid outletDia. 152 mm Solids outletDia. 152 mm MaterialStainless steel 1.4306 (304L) Information Floorspace1,7x1,2 m Total height1,7 m Weight1500 kg Extra SpecificationsNozzle separatorDiscountSeparatorsAlfa LavalDiscountCentrifuges > SeparatorsBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for m ...

This 3-axis FERMAT VMF 1000 vertical machining centre was manufactured in 2008. It features a table size of 1300 x 600 mm and a maximum table load capacity of 800 kg. The machine offers impressive X, Y, and Z-axis travels of 1000 mm, 600 mm, and 570 mm, respectively. If you are looking to get high-quality machining capabilities, consider the FERMAT VMF 1000 machine we have for sale. Contact us for further details.

pressure: 50 t chamfer lenght: 1500 mm distance between columns: 1220 mm Control: Cybelec DNC 1200 closing speed: 95 mm/min working feed: 1-10 mm/sec work stroke: 156 mm overrun time: 59 ms tracking travel: 6 mm throat: 200 mm distance table - lower edge of ram: 301 mm table width: 160 mm table height: 850 mm x-axis: 550 mm travel R-axis: +/- 50 Number of axles: 3 (Y, X, R) St. weight: ca. 3600 kg dimensions: mm a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC universal bed milling machine Anayak is available. Travel X/Y/Z: 2500mm/900mm/975mm, table dimensions X/Y: 2900mm/800mm, spindle taper: ISO50, spindle speed: 3000rpm, power: 22kW, feed: 6m/min, rapid traverse: 10m/min, tool positions: 30. Machine dimensions X/Y/Z: approx. 6000mm/3000mm/3000mm, weight: approx. 20000kg, control: Heidenhain TNC 426. Documentation available. An on-site inspection is possible. Expected to be available around September 2026.

bore capacity in steel (diameter): 30 mm throat: 275 mm bore stroke: 100 mm taper MK: 4 MK table-size: 420 x 340 mm feeds: nein mm/U turning speeds: 80 - 2000 U/min total power requirement: 0,9 / 1,45 KW weight of the machine ca.: 0,22 t dimensions: 0,85 x 0.6 x 1,9 m Pillar drill with: - Variable spindle speed - Digital speed display - Digital depth display - Forward/reverse rotation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table-size: 800 x 400 mm spindle taper ISO: Sk 40 spindle turning speed range: 10 - 3150 U/min quill stroke: mm total power requirement: 12,0 kVA weight of the machine ca.: 2,2 t dimensions: 2,0 x 1,85 x 1,95 m CNC Universal Milling Machine - Heidenhain TNC 310 with handwheel - Hydraulic tool clamp - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Fikara Type of Machine : Galvanizing Rack System Technical Specifications - Year of Manufacture: 2000 - Year of Overhaul: 2018 - System Type: CE-1 - Heating System - Heating Output: 28 kW - Heating Medium: 3 x 400V, 50 Hz - Nominal Temperature: 70 degrees C - Nominal Current: 40.5 A - Ventilation System - Air Flow Rate: 17,500 m3/h - Motor Output: 6 x 0.55 kW - Voltage: 230/400 V - Nominal Current: 5 x 1.55 A The steel structure is no longer there Find more here - / Contact us at -

An old, however overall only 12 months operated, Friedrich Petig row punching line for copper busbar production (punching) is available. Product: copper bars/busbars/busbars/Cu-bars, control system: Siemens. Documentation available. An on-site inspection is possible.

Dimeco 1675/Dnbsp;straightener with CNC feed system (cybelec) - width: 500 mm - max thickness: 1,6 mm

Dimeco 1675/D richtmachine met CNC-aanvoersysteem (cybelec) - breedte: 500 mm - maximale dikte: 1,6 mm

VISCO JET MOTOR WITH PUMP  SSG FIMETT, ADLF 5X18 MULTISTAGE PUMP C/W 4KW MOTOR,4POLES AND 50HZ PLEASE CONTACT FATIMAH (+60136287197) MALAYSIA NUMBER LOCATED AT F25

: neu : 2025 : 050141 : prompt, Zwischenverkauf v : Polen : 2821.24 € : 1 : 200 x 32 x 32 mm : 1 kW : 2800 1/min : 42 mm : 470 mm : 250 mm : 1050 mm : 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVES: Version without suction (Art. 317.762) Version without stand, suction and brake/emergancy push button (Art. 317.774) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 030138 : prompt, Zwischenverkauf v : Deutschland : 3444.77 € : 1 : 13 mm : MK 2 : 220 mm : 40 - 4000 U/min : M 10 (steigungsabhängig) : 520 mm : 400 mm : 850 mm : 62 kg : 60 mm : 85 - 370 mm : 420 mm : 300 x 250 mm : 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice &, keyless chuck) ALTERNATIVE: Version with B16 spindle (Art. no.212500) The dat ...

Used Hammer Mill Grain Mill Manufacturer: VEB Fortschritt Type: GM 401 Capacity max 1.2 tons per hour Engine 18.5 kW 3000 rpm 380/660 V with blower Overall dimensions: approx. 1800 x 800 x 1100 mm These mills are used to shred free-flowing bulk materials such as grain, pet food and animal feed. Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Excellent condition - Fully operational - Loading / Transport possible! Positioning resolution : 0.5 a Tool changer Number of electrodes places: 4 Max. electrode dimension : 75 mm Max. electrode length Electrode length : 280 mm Max. electrode weight : 5 kg Max. total weight : 20 kg The tool changer runs sluggishly and would have to be checked. Machining table Usable area : 800 x 600 mm Load capacity : 1000 kg Number of T-slots for mounting : 5 pcs. Dimension of the grooves : 12 mm Working container Max. internal dimensions : 1200 x 800 x 500 mm Capacity : 475 L Fuse box Cabinet dimensions : 900 x 750 x 1950 mm Cabinet weight : 300 kg Protection class of the cabinet : IP 32 Processing head with high rigidity Max. electrode weight : 100 kg Insulated interface : 250/650 mm

Complete Mini Dairy Line – Seital 05X Separator + Malldison 1,000 L/h Self‑Heated Pasteuriser + Fords Little Gem 6/2 Glass Pint Bottle Filler, Ideal for: Small dairies, farm bottling, cream production, test plants and product development. Line is designed for approx. 1,000 L/h milk processing into glass pint bottles., 1) Seital 05X Cream Separator, • Make/Model: Seital 05X disk‑stack centrifuge, • Application: Milk clarification / cream separation, • Typical capacity: up to approx. 1,000 L/h (depending on product and setup), • Construction: Stainless steel product contact parts, • Features:, • Designed for continuous operation in dairy service, • Compact footprint – suitable for small plants/farm dairies, • Complete with bowl, drive and base frame, • Condition: Used, in good overall condition; available for inspection, • Suitable for: Whole milk separation int ...

Manufacturer: Matra Model: Type FANUC A04 Type: Wire EDM Control System: Fanuc Year of Manufacture: 2001 Find more here - / Contact us at -

Manufacturer: Matra Model: Type FANUC A04 B Type: Wire EDM Control System: Fanuc Year of Manufacture: 2002 Find more here - / Contact us at -

Manufacturer: Matra Model: Type FANUC A04 B Type: Wire EDM Control System: Fanuc Year of Manufacture: 2000 Find more here - / Contact us at -

Manufacturer: FARO Model: Faroarm D 1200 Type: Portable coordinate measuring arm Find more here - / Contact us at -

Manufacturer: Mitsubishi Model: FX20K Type: Wire EDM machine (Wire erosion) Year of Manufacture: 1999 Workpiece and Table Specifications - Maximum workpiece size (W x D x H): 1,050 x 800 x 295 mm - Maximum workpiece weight: 800 kg - Table dimensions: 780 x 630 mm - Axis travel (X / Y / Z): 500 x 350 x 300 mm - Maximum table feed rate: 1,300 mm/min Wire and Cutting Specifications - Wire diameter: 0.2 to 0.3 mm - Maximum wire feed rate: 250 mm/sec - Wire tension: 2 to 25 N Machine Dimensions and Weight - Overall machine dimensions (W x D x H): 1,810 x 2,310 x 2,050 mm - Machine weight: 2,550 kg Filter System - Tank capacity: 635 litres - Filter flow rate: 30 l/min - Filter fineness: 3 micrometres - Filtration: Paper filter (2 units) - Conductivity control: 0.5 to 100 x 10 ohm/cm - Filter unit dimensions (W x D x H): 800 x 1,700 x 1,720 mm - Filter unit weight (empty): 230 kg Ge ...

Edge banding machine Type: Tempora 45.03L Manufacturer: Format-4 Year: 2019 Smartuch control unit: 10.4" touch screen for easy control of the units. Pre-milling unit: Two counter-rotating diamond cutters for a clean cut without breaking out. Glue tray: Quick maintenance and the ability to work with EVA and PUR adhesives. Complete processing: Cutting, multifunctional milling, corner grinder for corner processing, radius sanders and surface sanders. Cleaning spray (at the rear): The machine is equipped with nozzles for applying cleaning agent in front of the polishing brushes, which guarantees a clean surface without glue residues. Technical parameters: Edge thickness: 0.4 - 3 mm Workpiece thickness: 8 - 45 mm Feed speed: 10 m/min Installation length: approx. 4,230 mm Machine in good condition, fully functional, under power Find more here - / Contact us at -

turning diameter over bed: 3750 mm turning diameter over slide rest: 3250 mm turning length: 15000 mm centre distance: 15000 mm faceplate: 3000 mm workpiece weight: 120 t steady: + 15t Rest: 2 main drive: 119 kW spindle bore: 105 mm spindle turning speed range: 0,33 - 75 U/min feed in x - axis: 300 mm/min feed in y - axis: 150 mm/min tailstock quill diameter: 500 mm total power requirement: ca 140 kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 2-Carriages - Face Plate 3000mm - 6-Steady Rests - 4-Way Bed Construction - Taper Attachment - Inch/Metric Threading - Tailstock With Live Center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mobile gravel processing Classifying Screening Plant Washing Plant Wet & Dry Screening Tracked Mobile Manufacturer: Terex – Finlay Type: Supertruk – 694 + Year of Make: 2019 Betriebst. 956 h Drive: Hybrid, Diesel/Electric 3 screen decks 5 fractions incl. oversize Location: NRW Price negotiation for viewing with test run by arrangement. The information in the offer is non-binding, prior sale is reserved. Dismantling, loading and shipping on request! I am happy to answer any further questions you may have. Goldmann +49 173 6242 600 (also WhatsApp)

Veneer Saw Scheer Type FM 3 Machine No. 113462 Cutting length 3000 mm Cutting height maximum 55 mm Maximum insertion height 60 mm Saw blade diameter maximum 180 mm Saw blade on the machine diameter 150 mm Motor power 1.65 kW Feed manual Height adjustment with handwheel With rear table support 3120 mm x 600 mm Dimensions 3450 mm x 1130 mm x H 1400 mm Weight approx. 450 kg

Russell Finex 17240 Vibratory sieve 2018, Stainless compact vibratory sieve, 550mm mesh diameter, mobile, 3Ph

FAM Mantis Belt slicer 2006, stainless, V belt slicer, HMI Touch screen controls, V belt length 2300mm, equipped with cutting wheel that holds 25 knives, up to 7000Kgs per hour, mobile, 3Ph

Russell Finex 30224 Vibratory separator 2015, stainless, five deck separator, with stainless meshs, 3Ph

for adhesive tape below. Optional on top - fully automatic sealing, Gluing drive: -drive motor for feed belts -pneumatic arm to close the lid

Manufacturer: FIMER, type T/6-V.A. Year of constr. 2000 6 capping heads. for 28 MCA amount of capping heads: 6 working direction: right-left (CCW)

filtration surface (sqm): 12 discharge of vessel: automatic discharge operating pressure (bar): 9 electrical power supply kW: 5 weight [kg.]: 1500 volume of vessel (ltr): 880

Nordson Hei?leim Ger?t 3400 V 2002 capacity / hour ca.: 1500 Strom / Volt: 380

Description: With touch screen control, Operating system: Windows, Protection: IP65, Power: 100-240VAC, 50-60Hz, 2A, Dimensions: 600 x 420 x 800 mm, Weight: 56 kg

Knife speed: 450 RPM, Knife set: grater, Infeed height: 1550 mm, Outfeed height: 600 mm, Power: 3 x 380V, 50Hz, 2.2kW, Dimensions: 1400 x 800 x 1550 mm, Weight: 260 kg

General SKU228Y124 LocationBarneveld CEcheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume200 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity275 l. (200 l.) Vessel sizesDia. 900x700 mm Dished bottomcheck Top connectionscheck OutletDN35 With jacketcheck volume 11,75 l. Max. temperature-10/150 With anchor stirrercheck Motor1,5 kW (400 V 1461 rpm) Speed mixing shaft41 rpm With homogenisercheck Motor4,0 kW, (380 V, 2905 rpm) Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information MakeNiro Croatia SerialNIC-17-04 TypeCV-201-NR-200 Year of construction2017 Mounted on legscheck With switchgearcheck Floor space1,10x1,10 m Total height1,60 m Weight620 kg Extra SpecificationsWith ball cleaning, con ...

Stabilized Courses X 350 Y 250 Z 300 Table 500 x 400 mm. Maximum part size to be machined 790 x 530 x 275 mm. Workpiece basin dimensions 790 x 530 x 350 mm. Linear guides. Maximum workpiece weight 500 kg. 80 A ISPG generator ITS HEAD AXIS C 16 ELECTRODE CHANGER with MINI 32 system. 410 liters dielectric tank.

Panel saw Type: F45 Elmo Drive Manufacturer: Altendorf Year: 2018 Large LCD display Max saw blade diameter 500 mm / 30 mm clamping hole – special clamping system Max cross-section of the main disc 179 mm Main saw blade drive - 5.5 kW engine with 3/4/5 revolutions per min. Double trolley on ground and hardened chrome rods with a length of 3400 mm 3-axis pre-cut 8200 rpm with parking position LED pre-cut safety lighting Control buttons on the moving table Rapido pre-cutting system Front support roll Note holder Steg - second support on the traveling table One-sided additional ruler Pneumatic pressure The possibility of grooving with a width of up to 15 mm Parallel CNC electric motor ruler with an accuracy of 0.1 mm and a width of 1300 mm Operating hours computer USB interface for transferring data and programs MENU program with language selection LCD Digital diagno ...

This FRIMO NFPP Thermoforming Plant was manufactured in 2015. It features a powerful HOP400 press with a force of 4000 kN and a press area of 2500 x 1800 mm. The plant dimensions are 18,000 mm in length, 13,550 mm in width, and 7,510 mm in height. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO NFPP Thermoforming Plant we have for sale. Contact us for further details.

x-travel: 6000 mm y-travel: 3500 mm z-travel: 1900 mm surface area: 6000x2500 mm control: Siemens type: 840D Tool changer: 40 chip conveyor: Richter b-axis: +/- 110 ° c-axis: 360° 0 turning speeds: 24000 U/min spindle taper:: HSK 63 spindle drive: 25 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine No.: 2259 B +/- 110° C 360° Table size: 6000 mm x 2500 mm (hole pattern 22H7 / M16) Spindle: Manufacturer Fischer, 2 pieces (type MFWS 1709/30 Serial number: 10015020 / 133227) Milling head: Forest Line type: fork head / B-axis +/- 110° swivel / C-axis 360° (infinite) rotation / Station for milling head storage (2 pieces) Chip conveyor: Scraper conveyor / Manufacturer: Richter Tool measurement: Blum Feed: X + Y 30,000 m/min / Z 28,000 m/min Rapid traverse: equals feed rate The tech. Data are manufacturer or operator information and ther ...

Thermoforming machine manufactured in 2014. This FRIMO FTL 80/200 Fullflex has a total of 1,260,207 cycles and a machine weight of 18,000 kg. It features dimensions of 15,000 x 9,600 x 7,650 mm and operates at a connected load of 172 kVA. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO FTL 80/200 Fullflex machine we have for sale. Contact us for further details.

Code: 0385 Brand: FESTOOL Model: KS 120 EB Precision radial mitre saw for wood, profiles, panels, beams, frames, joinery, furniture and various, complete with support table and 2 side stops System FAST FIX for quick blade change Precision double-column guide on 2 ball bearings Dual-line laser for precise cut marking Compact, lightweight design for easy transport Variable speed 220 Volt Blade diameter 260 mm Hole 30 Motor power 1600 W No-load speed 1400/3400 rpm Cutting depth 90/90° mm 305 x 88 Cutting depth 45/90° mm 215 x 88 Contoured profile 45/90° diagonal cut 168 mm Tilt angle 47/47° Bevel angle 50/60° 4-legged support table 2 side extension and support stands with measuring rod 1 workpiece clamping vice Dust extraction connection diameter 27/366 Overall dimensions machine mm 950 x 800 x 650 h Overall dimensions with table and stands mm 3300 x 850 x ...

A grain screening machine (vibrating screening machine) Främbs & Freudenberg for the mining industry for separating aggregates is available. Number of screen decks: 1, drive power: 7.5kW, speed: 1060rpm, lubrication: oil, oil filling quantity: approx. 2l, screen area X/Y: 4000mm/1500mm. Without screen lining. An on-site inspection is possible.

Robotic Painting Robot Motoman Yaskawa PX1450-F20, explosion-proof, XRC control Control: XRC Number of axes / robots: 6 Working radius: approx. 1435mm Year of Make:2007 Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Fanuc M710iC/20L , R30iA complete Year of manufacture: 6/2012 Control: R30iA Number of Axes: 6 Max. Payload: 20 kg max. Working range: approx. 3110 mm Profibus Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Fanuc LR Mate 200iC/5L R30iA Robot Control: R30iA Year of manufacture: 11/07 Number of axes: 6 Max. load capacity: 5kg Max. working range: approx. 892 mm Scope of delivery: robot, controller, scope of delivery, cable, teach panel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Fanuc M710iC/50, R30iA complete Year of manufacture: 7/2006 Control: R30iA Number of axes: 6 Max. load capacity: 50 kg Max. working range: approx. 2050 mm Profibus Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Compact cell Fanuc ArcMate 100/7L with R30iB control , Lorch S3 pulse welder new Number of axes: 6 Max. load capacity: 7Kg Max. working range: approx. 1633 mm Year of Make: 2016 Table surface each 750x500mm Total dimensions: approx. 2500x1500x2200 Total weight: approx. 2000kg In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Fanuc M20iA , R30iA complete Year of manufacture: 8/2012 Control: R30iA Number of axes: 6 Max. load capacity: 20 kg Max. working range: approx. 1811 mm Profibus Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.