müller f f used for sale

Travel X/Y/Z: 600mm/400mm/400mm, spindle taper: ISO40, quill stroke: 100mm, speed: 3150rpm, machine dimensions X/Y/Z: approx. 2000mm/1800mm/1900mm, weight: approx. 1750kg. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 600mm/400mm/400mm, quill stroke: 1000mm, spindle taper: ISO40, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2100mm/1750mm/1750mm, weight: approx. 1750kg. Documentation available. On-site inspection is possible.

turning diameter over bed: 2150 mm turning diameter over slide rest: 1800 mm turning length: 10000 mm speed: 1 - 300 U/min faceplate diameter: 1800 mm spindle bore: 200 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 4-jaw face plate Ø 1800 mm - 2 Steady rest Ø 100 to 560 mm and Ø 1.3 to 1.8 m - 4-way toolpost - tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 x Treif Flexon, built in 2010 + 2014

RABOLINI IMPERIA C WITH AUTOMATIC FEEDER -Automatic Die cutting machine with Rabolini hot foiling attachment -Year: 1990 -Electromagnetic clutch -Max Sheet Size : 800x1100 mms., Max die cutting size 750x1050 mms. -Control cabin for sheet speed control from 900 / 1600 Sh/hour -Honeycomb plate for hot stamping, 2 chases and frames for die cutting -Three programmable heating zones from control cabin -Rabolini Hot stamping foil unit with programmable pulling rolls -Max pressure power: 280 tons -All parts and accessories -Available in April

50 HL Brewhouse Manufactured by fabdec in 2013 Gas Fired brew house consisting of Mash tun/kettle/hot liquor tank/underback/heat exchanger/wort pump/swing bend plate /work platform/gas burner and associated pipework and fittings This is a SECOND HAND brewhouse and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk For more information and more available stock please visit us at - advancedbrewing.co.uk

FKS Fold Master creasing machine; SN 1019 05, Stacker feeder, counter, delivery, 4 creasing tools, computer control

Lot of approx. 265 small roller bearings, SKF, FAG, INA, , mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An absolute special price of € 0.7/piece excluding VAT. The total original price is at least 7 to 10 times higher. We can divide the bearings into 3 groups: 1) Approx. 225 pieces in cardboard or foil original packaging, including one item with 50 pieces (various SKF items such as minimal bearings, seal sets, etc.). Many bearings are from a large package where the individual bearings are not packaged. 2) Approx. 40 open, unused, fully functional bearing units. See bearing list on photo. Minor erro ...

1 x Used Wrapping Machine WM FC780 E, age 2005, Unwinder:, Single Reel holder, Max. reel diameter 1,200 mm, Thermoforming machine:, Max. tool size 780 x 570 mm, Max. tool size with pneumatic clamp frame 750 x 570 mm, Max. positive depth 130 mm, Max. negative depth 130 mm, Max. sheet width 810 mm, Max. sheet indexing 570 mm, Max. HIPS sheet thickness 1.8 mm, Max. EPS sheet thickness 3 mm, Max. platen stroke (upper – lower) 150 mm, Heater length 1,775 mm, Clamping force DaN 20,000, Upper heating, installed power Kw 41, Lower heating, installed power Kw 41, Vacuum pump motor Kw 2,2, Platen driving servo motor (each) Kw 7.5, Sheet index servomotor Kw 11, Dry cycle speed 45 Cycles/ min, Processing air pressure 7 bar, Water consumption at + 12° C. 60 L/ min, Air consumption at 7 bar 50 L/ cycle, Cutting Press:, Max. cut dimensions 760 x 550 mm, Platen clamping force DaN 60,000, Upper platen ...

Height=2.28 m, Overall length= 1.82 m, Overall width= 1.47 m, Net weight= 680 kg,

Height=1.87 m, Overall length= 1.2 m, Overall width= 1.42 m, Net weight= 557 kg,

industrial robot 6 axis FANUC Arc Mate 100i Be 6kg load capacity loading or welding robot for sale Robot FANUC Arc Mate 100iBe Robot Model A05B-1215-B651 year of manufacture: 2008 Axis: 6 Load capacity: 6 kg Reach: 1373 mm Repeatability: ±0.08 mm Robot weight: 238 kg Structure: Articulated Mounting: Floor Controller: R-J3IB Mate Control cabinet: AO5B-2445-B200 Electric power: 3kw 50 Hz 380v year of manufacture: 2008/06 Weight: 100kg

Type: Euroline L-18.5-L-R Type Laminator: KK-88-700-L Availability: from May 2026 Condition: in operation, well-maintained Overall length: 8755 mm Working height/belt height: 900 mm Mains voltage: 3 x 400 V + N + PE , 50 Hz Control voltage: 24 V, DC Air requirements. : 1100 l/min, 6 bar incl. laminator, guillotine, punching and cutting tool, filling station

General SKU334T899 MakeFriedhelm Stechel GmbH LocationBarneveld CEcheck TypeADE120-100 Main Features MaterialStainless steel Motor1.5 KW Inlet diameter748 mm Specified Features - Coating pan MaterialStainless steel 1.4301 (304) Coating pancheck Capacity150 Ltr. Batch sizemax. 130 kg Pan diameter1200 mm Pan depth620 mm In-/Outlet748 mm Motor1,5 kW 230/400 Volt Pan speed19 rpm Information No.D20909 Year of construction2009 Mounted on framecheck Floorspace2,5x1,8 m Total height2,3 mCoating pansFriedhelm StechelCoating pans > Coating pansBrand > Friedhelm Stechel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Feeler FTC 20 was manufactured in 1999. It features a swing over bed of 560 mm and a maximum turning diameter of 350 mm. The spindle operates at speeds up to 3500 rpm, supported by a robust 15 kW motor. Ideal for precision turning with its 8 tool stations and manual tailstock. Consider the opportunity to buy this Feeler FTC 20 horizontal turning machine. Contact us for more information about this machine.

This 3-axis FAT FTM 165 horizontal turning machine was manufactured in 2018. Ideal for precision turning operations, it offers robust construction and reliable performance. Consider the opportunity to buy this FAT FTM 165 horizontal turning machine. Contact us for more information.

This Vertical Machining centre Hyundai Wia F500D was manufactured in the year 2012 in South Korea ans has 8508 operating hours. It is equipped with a Fanuc i Series. The machine includes a through-spindle coolant capability and a chip conveyor. The technical documentation and electrical schematics are available.

This 5-axis LGB KX45S FIVE 2 was manufactured in 2012, featuring a moving table of 1480 x 1440 mm and a high-speed spindle at 18,000 rpm. It includes a HEIDENHAIN ITNC 530 control, HSK 63A tool holder, and a 24-position tool changer. Ideal for precise, complex machining tasks. If you are looking to get high-quality milling capabilities consider the LGB KX45S FIVE 2 machine we have for sale. Contact us for more information.

This DECKEL FP4A was manufactured in 1994. A vertical machining centre featuring a travel range of X=565mm, Y=505mm, Z=400mm, SK40 tool holder, and a spindle speed of up to 4000 rpm. Consider the opportunity to buy this DECKEL FP4A vertical machining centre. Contact us for more information.

This 5-axis FPT STINGER XL CNC milling machine was manufactured in 2008. Ideal for complex and precise milling tasks, it offers advanced capabilities for a variety of applications. Consider the opportunity to buy this FPT STINGER XL CNC milling machine. Contact us for more information about this machine.

This C.B. Ferrari B18 was manufactured in 2002. It is a vertical machining center that has been well-maintained and is ready for immediate use. Consider the opportunity to buy this C.B. Ferrari B18 vertical machining center. Contact us for more information.

This 3-axis FEHLMANN Picomax 82 CNC was manufactured in 1998. It features a Heidenhain TNC 426 control, with travel dimensions of 685/315/540 mm, and a maximum spindle speed of 16,000 rpm. The tool magazine holds 32 tools, SK30, and the machine supports a maximum table load of 250 kg. Consider the opportunity to buy this FEHLMANN Picomax 82 CNC vertical machining centre. Contact us for more information about this machine.

This TOYODA FH 400 J Horizontal Machining center was manufactured in the year 2014 in Japan and has 36057 production hours. It is equipped with a Fanuc Series 32i-Model A control unit. The machine has a spindle speed of 15000 rpm.

This 3-axis FAMUP MMV 200/60 was manufactured in 2004. It features a table size of 2400 x 600 mm, with travel distances of X: 1500 mm, Y: 580 mm, and Z: 600 mm. The machine supports a table load up to 2000 kg and includes a high-speed spindle at 10,000 rpm, a 30-tool magazine, and CNC control by Heidenhain TNC 426. Contact us for more information about this machine.

This FORST RTSA 32x1600x630 was manufactured in 2019. Consider the opportunity to buy this FORST RTSA 32x1600x630 sheet metal machine. Contact us for more information.

This 3-axis FADAL 906-1 vertical machining center was manufactured in 1995. It features X, Y, and Z axes with travel distances of 1000mm, 500mm, and 500mm respectively. If you are looking to get high-quality milling capabilities, consider the FADAL 906-1 machine we have for sale. Contact us for more information.

This 5-axis OMV Active Five 3000 was manufactured in 2008. It features a fixed table with a tilting head, Heidenhain TNC-530 control, and a travel range of 3000 x 1800 x 850 mm. The spindle operates at 22,000 rpm with a HSK63A taper and a 30-position tool changer. If you are looking to get high-quality milling capabilities, consider the OMV Active Five 3000 machine we have for sale. Contact us for more information.

This 3-axis EMCO FamUp MCP 100-50 vertical machining center was manufactured in 2007. It features a Siemens 840-D control system, a 2-fold pallet changer, and a 30-fold tool changer with holders. The machine includes a screw chip conveyor and a fully protected cabin with safety doors. Ideal for operations requiring a table load up to 600 kg and speeds up to 10,000 rpm. Reach out for further details regarding this vertical machining center.

This 4-axis Fidia K 165 BSH was manufactured in 2002. It features a PCN775 control unit and a main spindle with a speed range up to 30,000 rpm. The machine dimensions are 3723 mm in length, 3750 mm in width, and 3370 mm in height, supporting a maximum table load of 2000 kg. If you are looking to get high quality milling capabilities consider the Fidia K 165 BSH machine we have for sale. Contact us for more information.

This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information.

This 3-axis Fidia D165 3A vertical machining center was manufactured in 2001. It features a machining area of 1000x600x500 mm, a table load capacity of 1500 kg, and a high-speed spindle up to 24000 RPM. Equipped with a Fidia C1 controller and a 20-position tool magazine, the machine we have for sale is robust and versatile. Contact us for further details regarding this vertical machining center.

This AgieCharmilles FORM 30 was manufactured in 2014. A robust die-sinking EDM machine, its ideal for detailed and precise metalwork. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking edm machine. Contact us for more information.

This 4-axis FANUC Robodrill Alpha-D21LiB5 was manufactured in 2016. A vertical machining center featuring a 4th axis continuous table, spindle speeds up to 10,000 rpm, and a high-pressure system through the spindle at 15 bar. With less than 2000 working hours, it includes a tool magazine with a capacity of 21 and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the FANUC Robodrill Alpha-D21LiB5 machine we have for sale. Contact us for more information.

This 4-axis FANUC Robodrill Alpha-T14 iD was manufactured in 2004. It features a BT30 spindle taper, a 14-tool turret, and a table size of 750 x 380 mm. Equipped with a Fanuc series 16i-MB control system and a 4th axis by Yukiwa. Running time stands at 23,500 hours. If you are looking to get high-quality milling capabilities consider the FANUC Robodrill Alpha-T14 iD machine we have for sale. Contact us for more information.

This Other FSW head was manufactured in 2023. Designed to integrate seamlessly with milling machines, it features friction welding technology. Ideal for enhancing your milling setup with advanced welding capabilities. Contact us for more information.

This 3-axis YCM FX380A vertical machining center was manufactured in 2018. It features a high-speed IDD spindle at 12,000 RPM and a MAS-BT40 taper. Equipped with a 30-slot drum tool magazine and a robust 240-liter coolant system, it ensures efficient machining with a table load capacity of 200kg. The spindle supports cooling through the tool with a 20-bar pressure. Ideal for complex machining tasks, the YCM FX380A machine we have for sale. Contact us for more information. There are 2 equal units available.

This 3-axis FAMUP COBO MM 3000 was manufactured in 2002. It features a working area of 3000 × 600 × 600 mm, spindle speed up to 15,000 rpm, and ISO 40 spindle taper. Equipped with a 30-position tool changer, high-pressure through-spindle coolant, a dividing wall for pendular jobs, and a chip conveyor. Consider the opportunity to buy this FAMUP COBO MM 3000 vertical machining centre. Contact us for more information.

This Grecon Dimter FDL-F 205/600/500 was manufactured in 1997. It is designed for woodworking applications, offering robust performance and reliability. Ideal for handling a variety of wood processing tasks efficiently. Contact us for more information about this machine.

This FPT DINO was manufactured in 2002. It features a Siemens 840D CNC, a table size of 1200x3000 mm, and travels of X2700, Y2200, Z800 mm. Equipped with a 5-axis continuous head with an electrospindle reaching 18,000 RPM and an 18-position tool changer. Consider the opportunity to buy this FPT DINO universal machining centre. Contact us for more information.

This SAC F300 was manufactured in 2006. A robust woodworking machine, its ideal for various wood processing tasks. Contact us for more information.

This 5-axis LGB KX45 SQUARE FIVE 2 vertical machining centre was manufactured in 2012. It features a moving table of 1480 x 1440 mm, a Heidenhain ITNC 530 control, and a high-speed capability of 18,000 rpm with HSK 63A. Additional highlights include a chip conveyor, a Renishaw tool filler, 40 tool places, and an IKZ 40 bar with a cooling unit. For more information about this vertical machining centre, please reach out to us.

This BRANDT Ambition 1660 FGC edgebander was manufactured in 2010. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this BRANDT Ambition 1660 FGC edgebander. Contact us for more information.

This 3-axis Hyundai WIA F500 + was manufactured in 2019. It features a Siemens SINUMERIK 828D control unit, a spindle speed of up to 8,000 rpm, and a spindle motor power of 15/11 kW. The machine includes a CNC vertical machining center, chip conveyor, automatic tool changer, and internal cooling system. If you are looking to get high-quality milling capabilities, consider the Hyundai WIA F500 + machine we have for sale. Contact us for more information.

This 3-axis Feeler PVF 800 vertical machining center was manufactured in 2012. It features a spindle speed of up to 8,000 rpm, a tool changer with 22 tools, and rapid traverse rates of 24/20/15 m/min in X/Y/Z. The machine includes a Renishaw TS27R automatic tool setter and through-spindle cooling. If you are looking to get high-quality milling capabilities, consider the Feeler PVF 800 machine we have for sale. Contact us for more information about this machine.

This 4-axis FomIndustrie DALI 70 vertical machining centre was manufactured in 2008. Ideal for intricate machining tasks, it offers precision and versatility in a robust design. Consider the opportunity to buy this FomIndustrie DALI 70 vertical machining centre. Contact us for more information.

This FANUC Roboshot S50iA was manufactured in 2016. It is an electrical injection moulding machine with a closing force of 50 tons and a screw diameter of 20mm. Consider the opportunity to buy this FANUC Roboshot S50iA electrical injection moulding machine. Contact us for more information.

This 3-axis Strojtos FGS 63 NCP was manufactured in 2007. It features a robust table with dimensions of 630 x 1800 mm, capable of handling a maximum workpiece weight of 1000 kg. The spindle supports a torque of 1600 Nm and offers a speed range up to 2800 rpm. Ideal for precise vertical machining with its extensive travel in all axes. Consider the opportunity to buy this Strojtos FGS 63 NCP vertical machining centre. Contact us for more information.

This 3-axis FAMUP MCX 600 was manufactured in 1997. It features a robust 3600 kg base machine weight, with a total weight including all components at 4630 kg. The machine offers a spindle speed of up to 6000 rpm and accommodates a maximum table load of 400 kg. X, Y, and Z axes travel are 600 mm, 400 mm, and 400 mm respectively. Consider the opportunity to buy this FAMUP MCX 600 vertical machining centre. Contact us for more information.

This FANUC ARC Mate OiB robot arm was manufactured in 2015. It features a maximum load capacity of 3kg. Consider the opportunity to buy this FANUC ARC Mate OiB robot arm. Contact us for more information.

This DOEBELI FSM150 S surface grinding machine was manufactured in 1997. It features dimensions of 1,800 x 1,700 x 1,900 mm and a weight of approximately 2,500 kg. The machine includes a Lehman dividing machine EA-407.1A, six base holders with various accessories, and multiple collet chucks. Consider the opportunity to buy this DOEBELI FSM150 S surface grinding machine. Contact us for more information.