müller f f used for sale

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 2301; Gross weight [kg]: 2301; Engine: NEF67TM3A; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 600

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 2288; Gross weight [kg]: 2288; Engine: F36.ETVP02.A94; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 850

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1823; Gross weight [kg]: 1823; Engine: F34.TEVP01; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 450

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1823; Gross weight [kg]: 1823; Engine: F34.TEVP02; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 450

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 4376; Gross weight [kg]: 4376; Engine: C13TE3A; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 597

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Power [PS]: 230; Transport weight [kg]: 4376; Gross weight [kg]: 4376; Engine: C13TE3A; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 597

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1823; Gross weight [kg]: 1823; Engine: F34.TEVP01; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 450

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 5305; Gross weight [kg]: 5305; Engine: CR16TE1W; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 740

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 4710; Gross weight [kg]: 4710; Engine: C13TE7; Front tyres remaining: 538; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 597

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Power [PS]: 230; Transport weight [kg]: 4710; Gross weight [kg]: 4710; Engine: C13TE7; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 597

Brand Lisec Type Butyl extruder machine Model LBH-25ARS + 2x RAV2 Serial number 572-003937 Year of construction 2000 Weight 2.1ton Assets 7kVA Air pressure 6bar Water pressure: NVT Length +/- 11m Width +/- 5m Height +/- 3.5m Working height ,4m Transport dimensions L x W x H Special 2 pcs 3.5×2.6x2m + 6×1.5×3.2 Min.-max. profile 4-15mm Min.-max glass size 2.5×3 Number of brushes n/a Number of spindles n/a State machine n/a Type of control B&R Electrical connection 380+N+PE Instructions for use Yes Electrical diagram Yes Parts list available on request Available software back up Photos/film available: Photos and video available

Drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units each with 1667W, 400 V ( length 2360mm ) Air flow for this system is: 3m3 /sec or 10.000m3 /hour 2 fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Butter Bulk Packer Simon Freres Make : SIMON FRERES Model : KM Capacity : 2500 kg per hour Filling Capacity : 5-25 kg in boxes Semi automatic box inverter Inlet Hopper Twin Screw Feeder Hopper Capacity : 100 kg New Controls Condition : Excellent Location : Dairy Machinery UK

Producer TOS Tjechië Type FNK25A Table size 250 x 1300 mm Movement X=axis 800 mm Movement Y=axis 350 mm Movement Z=axis 450 mm Spindle taper SK 40 DIN 2080 movement quill 125 mm Spindle speed 56 -4500 Rev/min. Table feedrate X-Y-Z as Yes Voeding Pinole Yes Power 4 kW Dimensions L x W x H 2665 x 1980 x 226 mm Weight 1,760 Kg

spindle diameter: 140 mm x-travel: 12500 mm y-travel: 3000 mm z-travel: 800 mm tool taper: ISO 50 dimension of the ram: - mm turning speed range - spindle: 1000 U/min main drive: - kW table surface area: 3000 x 2100 mm V-axis: 1500 mm table load: 25 t control: TNC 420 total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m equipped with - CNC control Heidenhain TNC 430 - NC rotary table 3000 x 2100mm, 25t - Telescopic steel sheet covers - Panel field (several sizes) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic batter breading machine S Compact Ital Form Automatic battering and breading Can be fully dismantled for easy cleaning Made of stainless steel and suitable plastics for food industry Easy maintenance Dimension: 1000 x 485 x 400mm Speed: 10m per minute Production: 2.000 pieces per hour Motor power: 0.18kW Voltage: 120-220V / 50-60Hz Machine weight: 55kg Optional accessories: Table with stainless steel wheels - 500.25 €

Length: 2700 mm Width: 1100 mm Height: 850 +- 150 mm engine output: 0,37 kW Electric capacity: 0,5 kw compressed air: 6 bar Horizontal impregnation system Pro flow for individual parts with rinsing circuit. --------------------------------- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. --------------------------------- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blo ...

Deckel FP4MA 2204 - CNC Tool Milling Machine - 2022 refurbished - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Power-operated tool clamps horizontally and vertically - Automatic speed manual transmission - Automatic clamping in the X, Y and Z axis - Automatic central lubrication - Coolant device - Direct displacement measurement - Anti-collision clutch in the Y and Z axes - Year of construction 1988 - Incl. tool holders, drilling/milling tools & tool trolleys Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head can be moved manually on the headdle block: 150 mm Main Drive: - Pole-switchable three-phase brake motor: manual  ...

Technical data of the shelf connector: Shelving system: Polypal The scope of delivery includes: 01x Shelf connectors, used for shelf spacing: 200 mm Total length: approx. 260 mm U-profile dimensions: approx. 50 x 15 mm Material colour: sendzimir galvanised Drill hole Ø: 11 mm Weight: 0.250 kg | Pcs. Incl.: 02x Screws M10 x 35 mm 02x Nuts M10 02x Washers M20 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Inclined bucket mixer Manufacturer FMW Type 115200/21H475.1 Capacity 50 litres Material: Stainless steel heated, double jacket

Freetech motor 0,8/1,1 kW 400 volt 1400/2800 rpm

fully functional diesel emergency generator. We tested the functionality 2 times a year.

We also build new inexpensive chamber pasteurizers - for 1 – 8 pallets - for beverages with and without CO2 - With hinged door or lifting door - Completely in stainless steel frame design - Stable assembly systems with hygiene concept - Only approx. 2.75 kW per blower motor Please feel free to contact us!

Key data: 110 KW, 1500 1/min

Removed in very good condition rotating

Specifications Manufacturer: Saeilo Type: FP3-A Control: Contur M Year of Make: 2021 Travels: X 400 mm Y 300 mm Z 375 mm Clamping area: 400 x 800 mm Speed: 50 – 2,000 rpm Tool holder: SK40 Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included Coolant Setup Table cabin Electronic handwheel Hydraulic tool clamping Machine Light

Table dimensions ... 900 x 500mm Axis X ... 700mm Axis Y ... 500mm Axis Z ... 500mm ISO 40 Spindle speed ... 0-3150 rpm L x W x H ... 2220x2115x2120mm Machine weight ... 2550kg The machine is in good condition, possible to test under power.

X-axis: 775 mm Y-axis: 250 mm Z-axis: 425 mm Table dimensions: 1,100 x 240 mm Spindle Holder: ISO-40 Spindle speeds: 48 - 1,500 rpm Feed X/Z axis: 12 - 280 mm/min. Digital reading: Heidenhain on Y/Z axis Equipped with: - Milling protection - Coolant device Country of origin: Spain Motor power: 3 kW Machine LxWxH: 160 x 130 x 160 cm Machine weight: 1300 kg

Laser power: 3,000 watts Type: A04B-0820-B342 Weight system: 750 kg Dimensions LxWxH: 205 x 75 x 120 cm Equipped with: -Stabilizer - Fanuc Power Converter DTU60/2/0/5S - CNC control Fanuc Series 31i-LB

Key data: 425 mm, 145 mm, 120 mm

Saw blade: ø 425 mm Saw Capacity: 145mm Round 120 mm square Saw Angle: 45º Left/Right Sawing speed: 18 / 36 rpm Auto. Roller conveyor start: MPS, type 4010, 8 meter range Equipped with: - Semi automatic - Hydraulic clamping - Variable saw feed Country of origin: Germany Motor power: 5.5 kW Machine weight: 1000 kg Machine LxWxH: 120 x 90 x 180 cm

Horizontal batch mixer with a gross volume of 6,800 l. (= usable filling: 1,700 l. to 5,100 l. max.). Including drive unit with 110 kW and motor frame. Centrifugal unit equipped with Becker blades, end wall equipped with sampling device, emptying pneumatically via long floor flap.

Key data: 14000 mm, 1500 mm, 3000 mm

Stock number 1110049 Machine Type: CNC Long Bed Milling Machine Make FPT Type Spirit 130 Year of construction 2012 Control type HEIDENHAIN TNC Itnc 530 X-off (mm) 14,000 Y-displacement (mm) 1,500 Z-off (mm) 3,000 Speeds of (rpm) max. 4,000 Tool holder Iso 50 Rapid traverse max 25,000 mm/min Tool changer for 60 tools in really top condition and the machines can be demonstrated under power Information: CNC Control One 29,766 hours Program leach 9655 hours

GRP 250to year 2000 Needle bearing to screw shaft defective, machine stopped. Find more here - / Contact us at -

engine output: 5 kW saw-blade dia.: 300-350 mm Working speed: 0-40 m/min weight: ca. 1.300 – 1.800 kg kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Feintool Model: GKP-F 160 Type of Machine : Fineblanking Press Revision Year: 2003 Total Force: 1600 kN Head Pressure: 10 - 400 kN Table Pressure: 10 - 500 kN Stroke Rate: 20 - 70 strokes per minute Operating Voltage: 3x400V, 50Hz, N + PE Control Voltage: 24V Power: 22 kW year 1975 but had was completely refurbished in 2000 Find more here - / Contact us at -

x-travel: 1.750 mm y-travel: 1.400 mm z-travel: 550 mm Control: SIEMENS Sinumerik 840D sl Working area: : surface area: 1.000 x Ø1.200 mm max. workpiece weight: kg Feeds: : X-, Y- and Z-axis, stepless: mm/min rapid travel x/y/z: mm/min : : Constant Power at 100 % ED: 18 kW torque: 80 Nm turning speeds: 18.000 U/min : +/185° Direct Drive tool taper: HSK A63 tool changer: 60 fach dimensions of the machine ca.: 6,2 x 3,8 x 4,3 m total power requirement: 50 kW weight of the machine ca.: 20 t Equipment and accessories • Compact portal milling machine STINGER180 - Installation without contoured foundation • CNC control Siemens SINUMERIK 840D solution line • TULCE HSK-63A head with integrated, direct-driven A-axis • Stepless and endlessly rotatable milling table Ø1,200x1,000mm • Omlat spindle, max. speed 18,000 min-1 • Axis drives via precision ball screws and digital servo ...

Manufacturer: Feintool Model: GKP-F 160 Type of Machine : Fineblanking Press Revision Year: 2003 Total Force: 1600 kN Head Pressure: 10 - 400 kN Table Pressure: 10 - 500 kN Stroke Rate: 20 - 70 strokes per minute Operating Voltage: 3x400V, 50Hz, N + PE Control Voltage: 24V Power: 22 kW Fully refurbished in year 2003 Find more here - / Contact us at -

Caterpillar SR4 - Overhauled - 1000 kW - 806 frame

Machine for making plastic sleeves for bottle etc. Sleeve width 20 -200 mm Speed 200 m/min Accessories: 2 containers for solvents,  Extraction with blower, Perforation

Used Lifting Kneader KEMPER, Type: F125 ASL -Refurbished- - for 200 kg dough / 125 kg flour - Incl. 1 tank car - 2 speeds -Timer - All wear parts renewed (bearings, belts, etc.) - Condition: Very good, overhauled, ready for immediate use - 6 months warranty Visits and test runs are possible by arrangement.

Fuho Type 1408 Metal Band Saw Vertical band saw Passage width 350mm Saw blade device Motor 1kW 400V 50Hz Scissors for saw blades Table can be swivelled transversely and longitudinally Saw blade guide at the top and bottom Band length 2362mm G&2996-M40GH

Food Tools CS4AAC round cake slicer Serial: 5253 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with three cutting inserts and spare blade, mobile

Food Tools CS1000CE Automatic round cake cutter Serial; 3190 This cake slicer is capable of cutting a variety of frozen round products including cheesecakes, layer cakes, ice cream cakes, pies and more. The machine is best for bakeries producing 200 or more products per hour

Producent INTOS Zebrak Tjechië Type FNGJ 20 Chalkboard afmeting breedte x lengte 400 x 256 mm Longitudinal Plaatsing X=as 450 mm Dwarsverplaatsing Y=as 300 mm Verticaleverplaatsing Z=as 350 mm Spindle opname SK 40 DIN 2080 Spindle toerental 50 -2500 rpm. Aantal toerentallen 18 Sheet voeding X-Y as 8-400 mm/min. Sheet voeding Z as 4-200 mm/min. Rapid traverse X-Y as 2400 mm/min. Rapid traverse Z as 1200 mm/min. Electrified capacity 2.2 kW Afmetingen L x W x H 1735 x 1475 x 1660 mm Weight 1660 kg Standaard toebehoren Koelmiddel inrichting Heidenhain uitlezing met taster

Key data: 3048 KW, 1500 1/min

Engine with gas train, XT4 safi2 control panel, wihout generator ABB turbochargers, documentation

Koppens/CFS Crumb Auger Feeder Model: BRF200 Built 2003 Screw auger feeder designed to feed a breading machine

Surface Grinding Machine ABA FFV 1000/50 Travel X: 1000 mm Travel Y: 500 mm Travel Z: 400 mm Magnetic chuck dimensions: 1000 x 400 mm Auto stepover X / Y / Z Separate electrical panel Separate lubricant tank Separate hydraulic group Voltage: 380 V Length: 4000 mm Depth: 1700 mm Total height: 2300 mm Weight: approx 6 T

overhauled battery head 5 ltr

Max power 350 hp 3800 rpm Max torque 700 Nm Number of cylinder 6

A versatile and robust Arsenal double-spindle universal milling machine with milling head is available. Table dimensions X/Y: 1350mm/320mm, table tilt: +/-45°, travel X/Y/Z: 1000mm/360mm/460mm, automatic travel X/Y/Z: 980mm/340mm/440mm. Horizontal spindle table distance: 30mm-490mm, vertical spindle table distance: 170mm-630mm, spindle mount: ISO50, speed: 2000rpm, feed X/Y/Z: 1000mm/min/415mm/min/415mm/min, rapid traverse X/Y/Z: 2500mm/min/1040mm/min/1040mm/min. Machine dimensions X/Y/Z: approx. 2800mm/3100mm/2000mm, weight: approx. 3500kg. On-site inspection is possible.

Roller conveyor with drive SFB conveyor technology type ITF / R-KT 50Roller conveyor with driven carrier rollers, roller conveyorMachine- No: 201800954/2 Year of construction 2019Roller conveyor length: 2000 mmUsable roller width: 500 mmRoller diameter: 50 mmNumber of rollers: 21 piecesRoller spacing: 100 mmConveyor speed: approx. 8 meters/minMotor power: 0.12 kWNet connection: 400 volts, 50 Hz- chain drive via SEW gear motor- all rollers driven with freewheel in both directions- ball-bearing steel rollers- Frame profile made of 3 mm U-steel with