126,776 used machines on RESALE, but how to find them? Machine Search
flue capacity: 125 kW; Conventional yeld capacity: 99 kW; flue diameter: 180 mm; hot air delivery pipes: 2 x 250 mm; flue length: 750 mm; oven width: 560 mm; oven hight: 700mm; air flow: 6300m³/h; power consumption: 1500W; aproximate surface to heat up: 1500m³; area to be heated: 300/350 m²; heater height without hot air conveying pipes: 1980 mm; heater width: 800 mm; heater length: 1280 mm; weight: 415 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...
flue capacity: 34 kW; Conventional yeld capacity: 29 kW; flue diameter: 160 mm; hot air delivery pipes: 2 x 180 mm; flue length: 500 mm; oven width: 400 mm; oven hight: 590 mm; air flow: 2200 m³/h; power consumption: 400 W; aproximate surface to heat up: 500 m³; area to be heated: 100/150 m²; heater height without hot air conveying pipes: 1560 mm; heater width : 550 mm; heater lenght: 920 mm; weight: 190 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...
Speed 1500 1/min, output 380-415 V (3-phase) 50 Hz Auction-ID: A1-46045-138
Total height container 390 cm! Equipped with: 4000 liter fuel diesel tank (empty)( 3450x1250x2000 mm) Including: 20ft container. Auction-ID: A1-43429-70
40kvA current power; 1,500 rpm; 4-cylinder Deutz engine oil-cooled; 3.1l displacement; Linz-Stamford Generator; AC output: 1 x 400V 32A, 1 x 400V 16A, 1 x Schuko 16A, 1 x Schuko 230V; Electric starter; Power failure detection AMF (Automatic Mains Failure); Automatic Switch Transfer (ATS) emergency power system; Operating time at 50% output approx. 28 hours (157l tank capacity); Auction-ID: A1-46030-12
30kvA current power; 1,500 rpm; 4-cylinder Deutz engine oil-cooled; 3.1l displacement; Linz-Stamford Generator; AC output: 1 x 400V 32A, 1 x 400V 16A, 1 x Schuko 16A, 1 x Schuko 230V; Electric starter; Power failure detection AMF (Automatic Mains Failure); Automatic Switch Transfer (ATS) emergency power system; Operating time at 50% output approx. 28 hours (157l tank capacity); Auction-ID: A1-46030-14
Key data: 2 KW
Multifuel 1Wartsila 19.5 MW CHP Power Plant with 2 × 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power, 9.0 tons/hour of saturated steam at 10 bar and 8 MW of 90C hot water . In ad ...
Viewing by appointment Working condition Auction-ID: A1-43890-27
Max snhelness: 2000, 20 LBS, diesel. Auction-ID: A1-40136-275
Unaudited Good condition Auction-ID: A7-46327-195
Steam generator PS400-60, electric heated stainless steel steam generator year of manufacture 2022, Factory inspection with the manufacturer 2026, 400 V / 60 kW / 50 Hz, 2-stage switchable (30 + 30 kW), max. operating pressure: 5 bar, adjustable operating pressure: 0 - 4 bar, max. steam amount: max. 84 kg/h (calculated value under optimal conditions), on a mobile frame, 1. Mechanical construction, The pot body is made of stainless steel 1.4571 and electrically welded. In, Kettle bodies are heating elements screwed in. The kettle body is located in a, Stainless steel housing and is clad with thermal insulation. In the stainless steel housing, the control cabinet is also located here. fittings (e.g.: steam outlet, water inlet,, etc.) lie outside the housing, 2. Functionality, Feedwater is pushed into the steam boiler by a water inlet valve. Is, when the intended water level is reached, the ...
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:275 mm gear width: mm max. module: weight of the machine ca.:9,4 t dimensions of the machine ca.:3,7 x 3 x 2,82 m min. number of teeth:5 max. number of teeth:2000 range of tooth size:20 mm max. gear width (internal machining):58 mm X-axis:325 mm y-axis:350 mm Z-axis:475 mm Bevel gear milling machine Gleason Pfauter including Promot Automation
; Power [PS]: 408; Gross weight [kg]: 9424; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x300kW, 3x30kW, - AC copper: 3P/4W, 300kW, - DC socket: 110kW, Power Output:, - AC socket: 3P/5W, 1x300kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 300
Key data: 710 KW
Nei pebbles Ltd electrical machine cage rotor induction motor output 710 KW machine designed for heavy-duty applications, often utilized for driving compressors, fans, or pumps
maximum number of results exceeded
please refine your search
7.000 € 
