138,283 used machines on RESALE, but how to find them? Machine Search
Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg
Heating, burner, gas burner, fan burner, gas fan burner -Manufacturer: Dreizler, fan burner type GE 200/300 AR 2 -Nominal heat output: 355 kW -Gas type: natural gas -Gas connection: 20 mbar -Blower motor: 0.37 kW -Dimension: 760/510/H535 mm -Weight: 33 kg
Machine type MIG/MAG welding system MerkLE brand Type M 254 K Connection voltage 3 x 400 Volt Setting range 25 – 250 amps Duty cycle 60 % ED at 250 Ampere 100% ED at 200 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 955 x 460 x 780 mm Weight 110 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 months warranty! 1 piec ...
Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...
Plasma cutting machine, plasma cutter for plasma cutting system -Manufacturer: Hypertherm, gas console for plasma cutting machine -Type: 073239 from plasma cutting machine HT2000LHF -Dimensions: 295/175/H370 mm -Weight: 9.9 kg
Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm -Weight: 4.2 kg
Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...
TO WHOM IT MAY CONCERN; WE VE GENUINE 3 PCS MAN NR 34 / S 114. COMPLETE EXHAUST GAS TURBOCHARGER WITH SILENCER AT AT OUR STOCK. IT IS OVERHAULED & TESTED ON TRIAL ENGINE OPERATION . PLS FIND SPECT AT BELOW. TYPE NR34 / S 114 SERIAL NO SMM0965 t max . 650 C n max 26300 1/min YOB 2012 -09 . MADE IN MAN ENTPACO IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY
Agilent 5975C XL inert MSD with Agilent GC 6890 N GC Agilent 6890 N, Injector Split/Splitless, MSD 5975 C inert XL with EI,Turbopump,Fastscan Edwards Backing Vacuum Pump 1.5 Agilent Productivity Chemstation E02.02 on PC/Win 10 complete with all cables, Option: Agilent Liquid Sampler, Sampler/ CTC or Gerstel MPS 2) The system is ready for installation and ready for operation current service Installation at extra charge on request
Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently maintained/with warranty Installation on request
Machine type MIG/MAG welding system MerkLE brand Type M 210 K Connection voltage 230/400 volts Setting range 25 – 210 amps Duty cycle 15 % ED at 210 Ampere 60% ED at 80 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 855 x 390 x 585 mm Weight 75 kg Special accessories point and interval device Adapter for 230/400 V Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white ...
Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...
Heating, burner, gas burner -Gas type: Natural gas (Liquefied petroleum) -Gas connection: 20 mbar to 1000 mbar -Nominal heat output: 3590 kW -Blower motor: 5.5 kW -Weight: 160 kg
Key data: 1500
2 x JENBACHER Jen 420-GS-B25 Biogas Generator Set Model: Jen 420-GS-B25 Fuel: Biogas Year: 2012 Hours: 85,000 Capacity: 1,500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system, Gas line, generator switch and other accessories. Service History Status: Rebuild done at 60,000h Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
We are selling here a 616 V08-K ( MWM / Deutz ) turbocharger for landfill gas. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on over 25 years of professional experience. With our modern ...
Available for sale 1 x 260 kW Gas genset Guascor SFGLD 180. Unit prepared to work in isle mode. The genset is in our installations and is in great working conditions.
Machine type MIG/MAG welding system Brand Rehm Type Magnum 182 Supply voltage 230/400 volts Setting range 30 – 180 amperes Duty cycle 25 % ED at 180 amps 60% ED at 140 amps 100% ED at 100 amps Current setting 6 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 16 Ampere Special device 2-stroke/4-stroke Points/Interval Dimensions L x W x H 760 x 320 x 580 mm Weight 53 kg Age approx. 20 years Condition workshop tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg, 8.0 mm Ø 1 can non-stick spray 1 piece hand shield 1 piece protect ...
Available in stock 2 x Used RMG Solenoid Gas Valves DN65 PN16, model 01-EVA 25 NH-4. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 1 x Gas Filter DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. VDC: 24 Power: 70 W Maximum Inlet Pressure: 0.1 bar Environment Temperature: -20ºC to +60ºC
Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16
Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
EKU PXL 80M Lava stone grill EKU PXL 80M Lava stone grill Stand-alone unit Height-adjustable stainless steel V-grill grate W 800 x D 750 x H 850 mm 2 heating zones Piezo ignition Substructure open V-rust 17 kW Gas More lava stone crickets in other sizes - new and used - can be found in our shop! International shipping costs on request!
Engine Make Jenbacher Engine Type 620 Power KW/RPM 2801/1500 Fuel Natural-Gas Generator Model 400 Volts Hz 50 Year of Manufacturing 2001 Running Hours 75.000
Engine Make JENBACHER Engine Type J 616 GS C02 Power KW 1942 KW RPM 1500 Fuel Natural Gas Generator Model Stamford Volts 690 Hz 50 Year of Manufacturing 1999 Running Hours 15.000
Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i Univ.SD -Art.No.: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg
Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg
used
Key data: 1415 KW, 400 V
1 unit NATURAL GAS GENSET FOR SALE 1 x JENBACHER JMS 420 GS-NL - Power Total: 1,415 kWe CHARACTERISTICS ✓ Genset: Jenbacher JMS 420 GS-NL | Year of manufacture: 2008 | Power: 1,415 kWe | Fuel: Natural gas ✓ Engine: J 420 GS A05 | Year of manufacture: 2015 | Mechanical power 1,451 kW ✓ Alternator: Stamford | 1500 rpm | 50 Hz | 400 V AVAILABLE EQUIPMENT ✓ Complete genset on steel baseframe with auxiliaries ✓ Control panel Jenbacher | Gas valves Oil tanks | Exhaust manifold ✓ Spare parts: 6 cans of Jenbacher 4x spark plugs, thrust rings, gas filters, 5x bridge mod. S4, M-coil.. ✓ Jenbacher documentation related to the project STATUS ✓ Run hours of genset: 68.000 hours ✓ New shortblock was installed in 2015 by Jenbacher. Maintenance 30k hours was done by Jenbacher in 1st April 2022, at 30.753 run hours. ✓ Current hours of motor: 38.670 h. Genset s ...
Arc welder Type: Euromag 35-2 Manufacturer Messer Griesheim
Arc welder Manufacturer: Oerlikon Type: Minicito
Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Digital Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 40 % ED at 300 amps 60% ED at 240 amps Current adjustment infinitely variable incl. wire automatic Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feed gearbox 4-roller gearbox Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading TIG DC, without RF Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, as new, incl. UVV workshop test report Scope of delivery welding system with the following accessories 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer argon with 2 pressure gauges 1 roll of weldin ...
Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Analog Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 240 amps Current setting 12 switching stages Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece spare parts box, k ...
Complete Containerised Trigeneration Tedom Genset 130kW Natural Gas. Fuel: Natural gas Year: 2017 Hours: 12,000 HZ: 50 Voltage: 400 V Scope of Supply: Engine, Alternator, Frame, Control System, Gas Line, Absorber, Cooling Tower, Water pumping system. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
34 MW Kawasaki Gas Turbine Overview A well-maintained, low-hour 34 MW gas turbine cogeneration power plant is available for acquisition. The facility commenced commercial operation in August 2021 and has accumulated approximately 13,298 operating hours as of May 25, 2023, with projected total operating hours of approximately 20,000 hours by March 2024. The plant will be available for delivery beginning July 2026. Designed for high-efficiency combined heat and power (CHP) applications, the facility incorporates a Kawasaki L30A gas turbine, heat recovery steam generation system, and steam absorption chiller, delivering excellent overall thermal efficiency while maintaining low emissions through Dry Low Emission (DLE) combustion technology. Plant Highlights Commercial operation date: August 2021 Manufacturer: Kawasaki Heavy Industries, Japan Manufacturing year: August 2020 ...
The power plant, based on a 5 MW gas turbine CENTRAX 501 KB7 is complete with all needed equipment, allowing a steam output of 20 tons per hour at 20 bar. From ZERO hours until the last working day all maintenance was performed by Centrax under full maintenance contract.
Engine Make SCANIA Engine Type Schnell 6R20.1B Power KW/RPM 265 / 1500 Fuel Gas Generator Model STAMFORD Volts 400 Hz 50 Year of Manufacturing 2014 GAS POWER HOLLAND 00316 38 63 90 71 (whatsapp)
Kawasaki Gas Turbine Cogeneration Power Plant 34 MW / 60 Hz This modern 34 MW Kawasaki L30A Gas Turbine Power Plant is a highly efficient and environmentally friendly cogeneration facility designed for industrial and utility-scale power generation. Manufactured in 2020 and maintained in excellent condition, the plant combines reliable electrical generation with heat recovery, achieving total fuel utilization efficiency of up to 85.5%. Operation was stopped on Stopped in March 2024 in good condition and the plant was preserved with KHI’s maintenance instructions. The plant is powered by a Kawasaki L30A two-shaft industrial gas turbine featuring a 14-stage axial-flow compressor, advanced Dry Low Emission (DLE) combustion system and high-efficiency turbine technology. The unit delivers approximately 34 MW electrical output with thermal efficiency exceeding 41%, while maintaining exce ...
Engine Make Jenbacher Engine Type 620 Power KW/RPM 2801/1500 Fuel Natural-Gas Generator Model 400 Volts Hz 50 Year of Manufacturing 2001 Running Hours 75.000 GAS POWER HOLLAND 00316 38 63 90 71
Engine Make JENBACHER Engine Type JMS 616 GS-N LC Power KW 2433 RPM 1500 Fuel GAS Generator Model AVK Generator Power 3760 kVa Volts 10500 Hz 50 Year of Manufacturing 2008 Running Hours 48312 GAS POWER HOLLAND 00316 38 63 90 71 FULL MAINTENANCE HISTORY AVAILABLE
Engine Make JENBACHER Engine Type J 616 GS C02 Power KW 1942 KW RPM 1500 Fuel Natural Gas Generator Model Stamford Volts 690 Hz 50 Year of Manufacturing 1999 Running Hours 15.000 SHORT BLOCK BY JENBACHER GAS POWER HOLLAND 00316 38 63 90 71 whatsapp
Engine Make SCANIA Engine Type Schnell 6R20.1B Power KW/RPM 265 / 1500 Fuel Gas Generator Model STAMFORD Volts 400 Hz 50 Year of Manufacturing 2014 GAS POWER HOLLAND 00316 38 63 90 71 whatsapp
1. Equipment Overview Equipment: Siemens SGT-500 Gas Turbine Packages Quantity: Two (2) units available Condition: New Surplus / Zero Operating Hours Manufacturing & Storage: Manufactured in 2007 Never operated – zero operating hours Preserved and stored according to OEM preservation procedures Originally supplied for a cancelled FPSO project Certification: Marine Rated DNV (Det Norske Veritas) Certified 2. Gas Turbine Technical Data Model: Siemens SGT-500 Configuration: Single-shaft industrial gas turbine Fuel: Dual Fuel (Natural Gas / Diesel) Frequency capability: 50 / 60 Hz ISO Power Output (Indicative): Natural Gas: approximately 17.4 MW Diesel: approximately 17.0 MW Performance: Specific Fuel Consumption: Natural Gas: 221 g/kWh Diesel: 262 g/kWh Heat Rate: Natural Gas: 11,066 kJ/kWh Diesel: 11,200 kJ/kWh ...
Turbogas Turbine GE5/1 5MW Natural gas for sale. Complete turbogas turbine plant with electric generator, recovery boiler and exchangers, dry cooler, diverter. Total Hours: 36,000 8,000 hours from the last overhaul. THERMAL POWER 9,0 MWt Saturated steam production 13,000 kg/h at 10BARg Voltage 11000 V Frequency 50 hZ Also available: - GE5/1 used turbine in nitrogen storage with 72,000 hours + 8,000 Hours after the last overhaul + one used generator Price: €240,000. - NEW GE5 Turbine Spare Parts (value 1 million) Price : €320,000 Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.
Key data: 529 , 400
AVAILABLE FOR SALE! USED GAS GENEARATORS SET. MAKE: JENBACHER TYPE: J212 GSB 21 POWER RATING: 529 KW FUEL: NATURAL GAS YEAR:2002 HOURS: 43.000 ALTERNATOR: AVK - STAMFORD ,400V, 50HZ, 1500 RPM EXCELLENT CONDITION. Engine has been overhauled and upgraded with New control system SCOPE OF DELIVERY: ENGINE+ALTERNATOR CONTROL PANEL GAS STREET
Gas mixer from Honeywell for sale, incl. gas test certificate and original packaging.
Key data: 1013 KW, 400 V
Jenbacher J416 Containerised CHP Biogas Generating Set The engine has run for 20,000 hours since the new underblock was installed. Fuel: Biogas Frequency: 50 Hz Scope of supply: Complete containerised CHP unit including Jenbacher J416 GS-B25 gas engine, Stamford PE734E alternator, common base frame, soundproof container with engine room and technical room, GE DIANE XT3 control panel, main LV switchboard, auxiliaries and control panel, gas train with external flanged connection, ventilation fan, fire and gas detection system, heat recovery circuits (engine jacket water, 1st and 2nd stage intercooler, lube oil cooler), roof-mounted air–water radiator / dry cooler for full heat rejection, exhaust gas line with regenerative afterburner, and exhaust chimney. Not included: Step-up transformer for medium-voltage connection and any external equipment not explicitly listed above. ...
For sale loaded now departure france Used Solar Gas Turbine Mars 100 SoLoNOx Natural Gas Location: france loaded now Year of manufacture: 2012 Output Power: 11,350 kWe Heat Rate: 10.935 kJ/kWe-hr (10.365 Btu/kWe-hr) Exhaust Flow: 153,245 kg/hr (337,950 lb/hr) Exhaust Temperature: 485 °C (905 °F) Frequency: 50 Hz Package hours: 27206 Gas turbine hours: 20547 Number of starts: 216 Housed on skid installed indoor with attenuating enclosure and fire detection and suppression system. Inlet System Barrier Filter and Silencer mounted on ancillary skid on the roof of the enclosure. Gear Reduction Box RENK MAAG GmbH. Type: GPF3-28, Output Speed/Freq. 50Hz - 1500rpm Generator Data: Electric Brushless AC Generator with Permanent Magnetic Alternator. Alternator data: 2.2kW. PF.9. 1 Phase. 240V/10A/120Hz. Gen Skid includes Lube oil tank, pumps, filters, start system with AC D ...
Gas mixture regulator, Woodward 8442-1005 for sale, with original packaging
used
The plant was shut down in 2024 and has 19,900 hours of use. It has been operating at around 19-21 MW/h LM2500 plant, including dismantling and logistics management, with immediate delivery. The plant was shut down in 2024 and has 19,900 hours of use. It has been operating at around 19-21 MW/h Power Output: 22 MW 25,759 KVA x 0.80 (50 Hz) 11,000v (It can be adapted to 60 Hz) Working Hours: 19.900 Number of starts: 215 Last Start: Jun 2024 Control Panel: Woodward Micronet and Bently Nevada Auxiliary Systems: Included Available documentation: work history, MTU review, single-line diagrams, manuals, periodic inspections. Complete control room with Woodward Micronet control units, Bentley Nevada vibration monitoring, ABB protection relays, and Siemens HMI. Gearbox and alternator -- ABB 50/60 Hz, 11,000V Filter box and enclosure.
Gas-shielded welding machine with pulse function, MIG/MAG pulse welding system max. welding power: 330 A Remote control connection 4-roller drive Water-cooled with: detachable wire feeder incl. ground cable Gas fitting Dimensions: 655/900/H1495 mm Good condition.
maximum number of results exceeded
please refine your search
