mwm engine used for sale

20121 - MARINE GEARBOX TK 600S - 571 HP AT 2100 RPM - RATIOS 1.97,2.53, 2.75,3.04, 3.42 Brand Gearbox TK Model Gearbox 600S-1 Ratio 1.97,2.53, 2.75,3.04, 3.42 Power 571 HP RPM 2100 RPM General condition BRAND NEW Status AVAILABLE SPECIFIC INFORMATION Sae housing SAE 1 Flexible coupling YES AND ALU. FLANGE Controls NO SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS Weight (kg) 600 KG

Caterpillar C7 - Used - 453 HP - C7B

Brand Gearbox TK Model Gearbox 600S-1 Ratio 1.97,2.53, 2.75,3.04, 3.42 Power 571 HP RPM 2100 RPM General condition BRAND NEW Status AVAILABLE SPECIFIC INFORMATION Sae housing SAE 1 Flexible coupling YES AND ALU. FLANGE Controls NO SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS Weight (kg) 600 KG

Reference number 20127 Brand Gearbox TWIN DISC Model Gearbox MG 514 C Ratio 5,16:1 Power 380 HP RPM 1800 RPM General condition USED RUNNING CONDITION Status AVAILABLE SPECIFIC INFORMATION Sae housing SAE 1 Flexible coupling YES Controls MECHANICAL SPECIFIC FEATURES Brackets NO Oil cooler NO

MASSON RCD 800 (W8000) 1216 kW /1600 rpm SN 22123 Ratio 3.538:1 1216 kW 1600 RPM Used in excellent condition Available Mechanical Controls Weight (kg) 1800 Dimensions (cm) 125 X 115 X 140

MARINE GEARBOX Reference number 20129 Brand Gearbox REINTJES Model Gearbox WAF 560 Ratio 5,05:1 Power 720 RPM 1800 Serial number 54445 General condition TAKEN OUT RUNNING Status AVAILABLE SPECIFIC INFORMATION Sae housing 30 Flexible coupling YES Controls MECHANICAL SPECIFIC FEATURES Brackets YES Oil cooler YES Pto NO Weight (kg) 1280 KG

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

Reference number 20130 Brand Gearbox TWIN DISC Model Gearbox MG 518-1 SN 3R4493 Ratio 5,01:1 Power 600 HP RPM 1800 RPM General condition USED RUNNING CONDITION Status AVAILABLE SPECIFIC INFORMATION Flexible coupling YES Controls NO SPECIFIC FEATURES Brackets YES Oil cooler NO Weight (kg) 700 KG

1000 RPM and Year of the manufacturer is 2006 and 2007 1100 kw and 1153 kw

MARINE DIESEL ENGINE Reference number 20132 Brand CUMMINS Model KTA38 M Power 940 HP RPM 1800 RPM Serial number 33121291 General condition Running Taken Out Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor MECHANICAL CONTROL Turbo YES Aspiration Turbocharged / Jacket Water Aftercooled Cooling system Sea water pump, Heat exchanger, Water cooled Starter Electrical Start (24V) Remarks RUNNING ENGINE INCLUDED 2152mm1462mm2083mm SPECIFIC FEATURES PanelDIMENSIONSLxWxH (cm)Weight (kg) Net Weight 4300 kg

MITSUBISHIS12A2 MPTK940 HP1940 RPM RUNNER ENGINE EXCELLENT CONDITION AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system KEEL COOLING Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME DIMENSIONS LxWxH (cm) 2,291 x 1,418 x 1,596 Weight (kg) 3,800 KG

Reference number 20136 Brand MITSUBISHI Model S12R- 2 MPTA SN 11955 Power 1180 HP RPM 1600 RPM General condition RUNNER ENGINE EXCELLENT CONDITION Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Turbocharged, double cooling,charge air cooler directly cooled by seawater. (Intercooler) Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME - VIDEO AVAILABLE DIMENSIONS LxWxH (cm) 2,416 x 1585 x 1807 Weight (kg) 5,470 KG

Reference number 20137 Brand MITSUBISHI Model S12R T2 MPTK (FW) SN 13885 Power 1260 HP RPM 1600 RPM General condition RUNNER ENGINE EXCELLEN CONDITION Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Turbocharged, double cooling,charge air cooler directly cooled by seawater. (Intercooler) Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME - WITH CLASS DIMENSIONS LxWxH (cm) 2,556 x 1,622 x 1,728 Weight (kg) 5,500 KG

MARINE GEARBOX Reference number 20148 Brand Gearbox TWIN DISC Model Gearbox MG 518-1 Ratio 5,07:1 Power 600 HP RPM 1800 RPM General condition USED RUNNING TAKEN OUT Status AVAILABLE SPECIFIC INFORMATION SAE Housing SAE-1 Controls MECHANICAL SPECIFIC FEATURES Flexible Coupling : YES 14 Inch flexible coupling Brackets : YES Oil cooler : NO DIMENSIONS 80x120x125 (on euro pallet) Weight (kg)1200 KG

Key data: 1480 KW, 1500 1/min

For Sale: Mitsubishi S16R-PTA Diesel Generator – Low Running Hours We have a Mitsubishi S16R-PTA Diesel Generator available for sale, built in 1995, with low running hours. This unit is well-suited for industrial, marine, and power generation applications, offering reliable performance and efficiency. Specifications: ✔ Engine Type: 4-stroke, water-cooled, V16 diesel engine ✔ Year of Manufacture: 1995 ✔ Rated Output: 1,480 kW ✔ Speed: 1,500 rpm ✔ Displacement: 65.37 liters ✔ Bore & Stroke: 170 mm × 180 mm ✔ Aspiration: Turbocharged & Aftercooled ✔ Fuel System: Direct injection ✔ Cooling System: Water-cooled ✔ Applications: Power generation, industrial, marine, and heavy-duty operations Key Benefits: ✅ Fuel Efficient: Advanced fuel injection system for optimized consumption. ✅ Reliable Performance: Designed t ...

1) Make:Cummins Model:NT855G4 ENG.No:2.3216300 Ref No. REB2-02 ALTERNATOR Make:Stamford Type:MHC434E Serial Number:Y3157/02 KVA:325 HZ:60 2) Make:Cummins Model:NT855G4 ALTERNATOR Make:Stamford Serial Number:Y3159/01 KVA:325 HZ:60 RPM:1800 V:440/254 3) Make:Cummins Model:NT855G4 Serial Number:5324 ALTERNATOR Make:Stamford Type:HC1434D Serial Number:0113587/01 Date:Oct-99 KVA:295 HZ:50

Manufacturer: Engel Verstellmotor Geräteträger, Year: 1994, Type: Serie A/GNM 4150-B5.2, Volt/Hz: 42/3,1 mpere, pm: 3000, Year :1994

Manufacturer: Perske Fräsmotor Hydrospindel, Type: Fräsmotor, Maschinennummer: KCS 72.24-2 D, aus Maschine: Homag, Amper 1: 22,5/13/20, Hz 1: 50/100/120, Power kW: 7/11, Speed rpm: 2870/5880,

Manufacturer: Indramat Permanent Magnetmotor , Type: MDD112B-N-040-N2L-130GA0, Motor with gear: n 4000 Umin, Gear: Km 0,42 Nm/4, Maschinennummer: MDN 17,5, From machine: IDN 41,5,

Reference number 20149 Brand MITSUBISHI Model S6A 2 MPTK Power 470 HP RPM 1940 RPM General condition RUNNER ENGINE EXCELLEN CONDITION Status AVAILABLE SPECIFIC INFORMATION Panel Yes including 2 extra panels and 1 alarm panel Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Turbocharged, double cooling,charge air cooler directly cooled by seawater. (Intercooler) Starter 24 V Remarks Runnig video available on request DIMENSIONS LxWxH (cm) 178 x 80 x 1,70 Weight (kg) 2100 KG

Manufacturer: Siemens Achsmotor für Ima Maschine, Type: 1FK6063-6AF71-1AG0, Motor with gear: yes, Maschinennummer: YF M110 5834 02 003, From machine: IMA BIMA, Motor with gear: yes,

20152 CUMMINS KTA19-M3 600 HP 1800 RPM 2374N.m @1800r/min BRAND NEW AVAILABLE SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 2450mm x 1150mm x 2000mm APPROX 2500 KG

Cylinder head to Hanomag diesel engine

Manufacturer: Weeke Z-Achsmotor, Type: MDD07B-N-060-n2S-095PL1, Volt: 24, Motor torque Nm: 4.40/6.60, IdN A: 15.00/22.60, N1-rpm: 6000, Weight approx. kg: 9,

Manufacturer: Perske Fräsmotor mit Hydrospannung, Type: KRSV 61.13-2 D, Flange motor design: 4,5-7.5 kw , Foot motor design: U/min 9570-17550, Diameter mm: Hz 167-300, Bore mm: Volt 194-350,

Manufacturer: Siemens Getriebemotor, Type: RPL 40-1 H 9486 1/5 BK, Volt: 375, n-min: 18, pm: 4800, Weight approx. kg: 50,

20150 MITSUBISHI S6R2 - PTA 575 kW - 770 HP 1500 RPM Serial Number 82000 General condition BRAND NEW Status AVAILABLE SPECIFIC INFORMATION Flywheel housing Governor Exhaust system Turbo / Aspiration Cooling system Starter Remarks SAE 0 Eelectronic DRY Turbocharged WATER COOLED 24 V BRAND NEW FEATURES Raw water pump DIMENSIONS LxWxH (cm) Weight (kg) 1690 mm x 1077mm x 1578 mm APPROX 2800 KG

Manufacturer: Perske, Type: KCS 71.16.-2 D, Amper 1: 14,5/8,4/12, Power kW: 4-6, pm: 2870/5870,

Manufacturer: Motovario Neu, Year: Winkelgetriebe, Motor with gear: 20-1041169961, Ampere 1: 50/0,25 kw, Year :Winkelgetriebe

Reference number 20153 Brand Gearbox REINTJES Model Gearbox WAF 540 Ratio 3,955:1 Power 660 KW / 885 HP RPM 1650 General condition USED - EXCELLENT CONDITION Status AVAILABLE SPECIFIC INFORMATION SAE Housing SAE 30 Controls MECHANICAL SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS 80X50X95 Weight (kg) 1000 KG

Various engines and attachments to Caterpillar Dozer D4

Manufacturer: SBA Trafo, Type: SFT, aus Maschine: UV Trockner, Prim:: 380, Sek:: 2000, Btr:: DB, Schaltgr.: C=4Uf, Hz 1: 50, V2: 6000,

Manufacturer: SBA, Type: SFT, Maschinnumer: 134-014, Prim:: 380, Sek:: 2000, Btr:: DB, Schaltgr.: C= 4 UF, Volt: 6000,

Manufacturer: Weeke, Year: 1999, Type: aus Weeke BP 195, Motor mit Getriebe: yes, aus Maschine: 195 Weeke, I-KL: 7,5-10, Motor mit Getriebe: yes, Baugrösse L x B x H mm: Werkzeugaufnahme HSK 63 F/18000-24000 Umin/12 KW Spindel, Year :1999

Reference number Brand Model Power 20152 CUMMINS KTA19-M3 600 HP 1800 RPM PEAK TORQUE 2374N.m @1800r/min BRAND NEW AVAILABLE SPECIFIC INFORMATION Flywheel housing Flywheel Governor Exhaust system Turbo Cooling system Starter Remarks Sae-0, Sae-1 18 inch, 14 inch MECHANICAL WET TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 2450mm x 1150mm x 2000mm

Manufacturer: Perske Umrichter, Year: 1996, Type: 2004 neugewickelt, Year :1996

Manufacturer: Homag Tellerwechsler, Year: 1999, Type: 8 Fach Wechsler, Length mm: Ersatzteil aus Weeke 195 T, Year :1999

20153 CUMMINS 6 CTA 8.3GM 163 kW MARINE DIESEL ENGINE GENERATOR TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 1200mm x 800mm x 1350mm 1300 KG

1998 model 2725 bhp 2005 kw Exwork delivery Aliaga/Turkey caglar@dortelgemi

Manufacturer: Indramat Motor mit Getriebe Atlanta, Year: 1999, Type: MAC93C-0-FS/4HC/110-A-0, Kw output: ca.10, Bauart Flanschmotor: yes, Preis pro Stück Euro: 1500, Available: sofort, Year :1999

Key data: 2700 KW, 1500 1/min

Jenbacher 620 Gas Genset Containerized Complete Package - TURNKEY solution to your tailored energy need. Containerized Jenbacher 620 with 2.7 MW unit is available for immediate sale. 2 x units with 2.7 MW is available for sale. Why to procure the Jenbacher from us? No Lead Time Units available straightaway Opportunity to move quickly Scope of supply includes: Fully Enclosed Containerized System: The entire system is pre-assembled and housed in a sturdy, weather-resistant container, making transportation and installation hassle-free. • Exhaust Silencers: Designed to keep noise levels low without compromising performance, making the system perfect for urban and noise-sensitive areas. • Table Cooler Radiators: These are included to help maintain optimal operating temperatures and enhance the lifespan of the generator. • Fuel System & Elec ...

Key data: 3000 KW, 1500 1/min

Jenbacher 620 Gas Genset Containerized Complete Package - TURNKEY solution to your tailored energy need. Containerized Jenbacher 620 with 2.7 MW unit is available for immediate sale. 2 x units with 2.7 mW is available for sale. Why to procure the Jenbacher from us? No Lead Time Units available straightaway Opportunity to move quickly Scope of supply includes: Fully Enclosed Containerized System: The entire system is pre-assembled and housed in a sturdy, weather-resistant container, making transportation and installation hassle-free. • Exhaust Silencers: Designed to keep noise levels low without compromising performance, making the system perfect for urban and noise-sensitive areas. • Table Cooler Radiators: These are included to help maintain optimal operating temperatures and enhance the lifespan of the generator. • Fuel System & Elec ...

20154 CUMMINS 4 BTA 3.9GM 50kW MARINE DIESEL GENERATOR UC 1224F BRAND NEW AVAILABLE TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 770mm x 710mm x 793mm 360 KG

Brand ZF Model Gearbox Ratio 4.697:1 Power 452 kW RPM 1800 kW/RPM 0.251 General condition New Condition Features: SAE Housing Controls Weight (kg) 632 Dimensions (cm) 80 x 120 x 130

20155 CUMMINS 4 BT 3.9GM 36kW MARINE DIESEL GENERATOR UC 1224C BRAND NEW AVAILABLE TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 770mm x 710mm x793mm 350 KG

Motor Perkins 704.30 # UA80973U857134J completely overhauled replacement engine incl.3.PTO finish without starter + alternator, flywheel. All wear parts renewed incl. Engine test run. 12 months warranty

Caterpillar C4.4 - Unused - 86 kW - S1M

Reference number 20156 Brand Gearbox REINTJES Model Gearbox WAF 540 Ratio 3,955:1 Power 660 KW / 885 HP RPM 1650 General condition USED - EXCELLENT CONDITION Status AVAILABLE SPECIFIC INFORMATION SAE Housing SAE 30 Controls MECHANICAL SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS 80X50X95 Weight (kg) 1000 KG

Maximum diameter to turn on the bench 2,110 mm Maximum diameter to turn on trolley 1,600 mm Maximum distance between platforms 12,830 mm Spindle hole diameter 155 mm Cone on spindle no. 120 metric Cone on spindle (with reduction) no. 6 clamps Cone on the counterpoint (6-bit reduction) no. 120 metrics Maximum stroke of the counterpoint 400 mm DSeed from the tool support plane to the axis of the 80 mm centers Main engine power 100 HP Spindle speed from 0.9 to 90 rpm with continuous variation Longitudinal feed no. 36: 0.2 to 12.8 Transverse advances No. 36: 0.1 to 6.6 Metric fillets #26: 1 to 42 Whitwoth fillets #17: 0.5 to 11 Quick forwards Maximum permissible load on the tips 50-60 ton Refrigerant liquid system