mw turbines used for sale

Sorfort available in recon or used injection pump

Immediately available used injection pump

Key data: 790 V, 1000 , 400

Deutz MWM Gas Generator TBG 620 V12 gas-fired power generators from 1998, Motor and generator on base frame. 1 available 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2, 1,000 KVA Gas engine Deutz MWM TBG 620 V12 Manufacturer: Deutz MWM Model: TBG 620 V12 Type: Gas Engine Serial Number: 2200047 Power [KW]: 790 Year of construction: 1998 Hours:– Weight of aggregate [kg]: 7.800 AC Generator Stamford PE734C2 Manufacturer: Stamford Model No.: HC I634K2 Type: AC Synchronous Generator Serial number:– Power [KVA]: 1,000 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1443 Speed [1/min]: 1,500 Year of construction: 1998 Weight [kg]: 2513

Key data: 790 V, 1000 , 400

Deutz MWM Gas Generator TBG 620 V12 gas-fired power generators from 1998, Motor and generator on base frame. 1 available 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2, 1,000 KVA Gas engine Deutz MWM TBG 620 V12 Manufacturer: Deutz MWM Model: TBG 620 V12 Type: Gas Engine Serial Number: 2200073 Power [KW]: 790 Year of construction: 1998 Hours:– Weight of aggregate [kg]: 7.800 AC Generator Stamford HC I634K2 Manufacturer: Stamford Model No.: HC I634K2 Type: AC Synchronous Generator Serial number: 0095677/01 Power [KVA]: 1,000 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1443 Speed [1/min]: 1,500 Year of construction: 1998 Weight [kg]: 2513

Key data: 600

MWM TCG 2016V12 600 kW el. power, 50 Hz after main overhaul with, also prepare TC, Intercooler, alternator) genset. Fully completed - also possible option add: control panel, power switch automat, container, cooling an heat system.

Engine Brand: DEUTZ, Conditie: CORE, Nominal Power @ Nominal Rpm: 640 Kw, Bore: 132 mm, Stroke: 160 mm, Engine Capacity: 35033 cc, Qty Cylinders: 16 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: White , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/222341, , = More information =, , Type: Engine, Year of construction: 1010, Type number: TBD616 V16; Transport weight [kg]: 1350

Engine Brand: MWM, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 762 Kw, Rated Speed: 1500 Rpm, Generator KVA: 738 , Generator Hz: 50 , Generator Volts: 400/231 V , Generator Amps: 1065 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/6709, , = More information =, , Type: Engine, Type of fuel: LPG, Type number: TBG620V12 GENERATOR 738KVA

- Camshaft Support Bearing housing MWM 12302303 - Suitable for several motors - Please note! Price per piece! - 12302303 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting a ...

1: Gas generators MWM TCG 2020 V16 Engine Make: MWM Engine type: TCG 2020 V16 Power: 1560 KW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2005 2: Gas generators MWM TCG 2020 V16 Engine Make: MWM Engine type: TCG 2020 V16 Power: 1560 KW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2008 - To be delivered in a TOP condition or condition! - Fully functional - Can be put into operation immediately - If you have any further questions, please feel free to contact us.

DMWM TEM IGNITION SYSTEM TEM-ZS1 Ignition device DeutzMWM Part No. 12298101

Key data: 1558 KW, 2300 kVA, 400 V

Engine Make: MWM Engine type: TCG 2020 V16 Power: 1558 kW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2007 Operating hours: 57,000 h Scope of delivery: Motor+generator on base frame, motor control TEM, throttle line, pumps.

Key data: 750 KW, 780 kVA, 400 V

MWM Emergency Power Generator TBD602-V16 Diesel emergency generator from 1980, operating hours are unknown, complete with controls, muffler, radiator, expansion tank and day tank. 1 available from 04/24 624 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: AVK DIDB 120/1109/40, 780 KVA Manufacturer: MWM Model No.: TBD602-V16 Type: Diesel Generator Set Serial number: 80 79 53 Power [KW]: 750 Year of construction: 1980 Hours: unknown AC Generator AVK DIDB 120/1109/40 Manufacturer: AVK Model No.: DIDB 120/1109/40 Type: AC Synchronous Generator Serial Number: 807953 Power [KVA]: 780 Voltage [V]: 10,000 / 5,770 Frequency [Hz]: 50 Electricity [A]: 51 Speed [1/min]: 1,500 Year of construction: 1980

Key data: 790 KW, 738 kVA, 400 V

Deutz / MWM Gas CHP (Container) TBG 620 V12 Landfill gas generator from 1999 with 150,200 operating hours, E40 12/22, complete (container) with cooling. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2-CG, 1,100 KVA Gas engine Deutz / MWM TBG 620 V12 Manufacturer: Deutz / MWM Model: TBG 620 V12 Type: Gas Engine (Landfill Gas) Serial Number: 2200633 Power [KW]: 790 Year of construction: 1999 Hours: 150,200, E40 12/22 Weight motor and generator [kg]: 7.800 Dimensions LxWxH [cm]: – AC Generator Stamford HC I634K2-CG Manufacturer: Stamford Model No.: HC I634K2-CG Type: AC Synchronous Generator Serial number: 0103530/01 Power [KVA]: 1,100 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1602 Speed [1/min]: 1,500 Year of construction: 1999 Weight [kg]: 2.513

Key data: 2000 KW, 2500 kVA, 10000 V

Deutz / MWM Gas CHP (Container) TBG 620 FV 20 Gas-fired power generator (mine gas) from 2003 with 95,000 operating hours, 22,000 operating hours after major maintenance, complete (container) with cooling. 1 available, 1,938 KWel x 1,500 rpm, 10,000 V/50 Hz (transformer 400 V optional). AC generator: AVK DIG 130 l/4, 2,500 KVA Manufacturer: Deutz / MWM Model: TBG 620 FV 20 Type: Gas Engine (Mine Gas) Serial Number: 2204013 Power [KW]: 2,000 Year of construction: 2003 Operating hours: 95,000 / 22,000 after major maintenance Weight motor and generator [kg]: 18.500 Dimensions LxWxH [cm]: – AC generator AVK DIG 130 l/4 Manufacturer: AVK Model: DIG 130 l/4 Type: AC Synchronous Generator Serial Number: 84 25722 A101 Capacity [KVA]: 2,500 Voltage [V]: 10,000 Frequency [Hz]: 50 Electricity [A]: 44 Speed [1/min]: 1,500 Year of construction: 2003 Weight [kg]: 7.100

Generator set, manufacturer: MWM, with TDB601-6, speed: 1,500 rpm, power PS: 485A, No. 601.06.10563, with oil tanks, cooler, storage tank and housing, partial dismantling of the enclosure necessary, dismantling from 03.06.2024, output by arrangement in week 23

NEW Part Number: 1216 2235 Water-cooled / 4-fold with hole for TEM Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.

Item Code: 1112273u Scope: Genset manufacturer: MWM Engine Type: TCG Engine Serie: 2016V16 Gas Type: Natural Gas Unit Ser No: 2214781 Orig Po Output kWe: 794 YoM: 2018 OH stop OP: 8745 powerup.at - Technology is our drive. Efficiency our focus.

Recon Part Number: 1202 9316 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

SIEMENS SGT800 gas only turbine Year: 2022. Brand new. OEM warranty 3 x 56MW, 60Hz No photos are available, units are still at the Siemens factory Only 3 units are available

MWM TCG 2020 V12-Nr. MWM TCG 2020 V16

Pressure gauge ELEKTRON KARDZHALI, PRESSURE GAUGE PLANT VARNA 0 - 25 mWs (0 - 2.5 bar) Accuracy class: 1.6 pitch: 0.5 Case diameter: Ø 100 mm Connection thread: M20 x 1.5 New ! Dimensions(single pressure gauge): 138 x 100 x 48 mm

Tapping machine FORTSCHRITT MWB Model 71 1/2 to 2 inch 220 V 1,05 kw with sawing device ! with 2nd set of jaws and 2nd cutting head ! Dimensions: 950 x 500 x 1200 mm

Tapping machine FORTSCHRITT MWB Model 71 1/2 to 2 inch 220 V 1,05 kw with sawing device ! with 2nd set of jaws and 2nd cutting head ! Dimensions: 950 x 500 x 1200 mm

Propane welder, torch box MWW, MECHANICAL TOOLS WURZEN ZIS-MWW 520 Propane with cutting torch and four welding tips various accessories in metal case As good as new ! Dimensions: 360 x 200 x 85 mm

Kolbe mobile mixer-grinder, type: MWE 32, machine number: 125 941, 400 V, 50 Hz, 11.4+2.8 A, 5.5+1.1 kW, plate diameter: 98 mm, total dimensions: 770 mm x 1200 mm x 1320 mm.

entry dimensions: 1000 mm wide / 4000 mm high length of chamber: 3500 mm 4 turbines, 5,5 kW each material speed: 63 m/sec 150 kg/min abrasive material per turbine max workpiece weight: 500 kg electric power: 45 kW Kind off: shot blasting unit Turbines: 4 turbines - 5,5 kW each

Infeed and Outfeed roller conveyor transport system for material lengths 2.5-14m Entrance dimensions- 2100 x 600mm The machine can process a plate of 2000mm wide and min. 5mm thickness Transport weight of max 1000 kgm Number of Turbines- 6 Turbines of C-380 11 kW Turbine Power Average speed at BSa 2 12- 1-1.5 mmin Abrasive hopper with screw conveyor 2.2 kW Abrasive used- Round low carbon sheet shot or cut wire Buck elevator with a 5.5 KW gear motor and a broken belt detection sensor Machine with Brush blow off plant Machine equipped with screw conveyor Automatic height adjustment for the brush Automatic adjustment for the 4 outer turbines

Work Envelope (WxDxH) (mm): 1600x500 Work Handling Method: Grit Sand   Other Info: 4 blasting turbines - Make : Rösler Germany - Typ : RRB 16/5 - Serial : WO 1576 - YOP : 2008 - Max. width : 1.600 - Max. height : 500 - Minimum product length : 2.300 - Minimum thickness : 6 - Workpiece weight Kg : 1.250 - Working speed M/min : 0,5–3 - In feeding height : 800 - 4 blasting turbines - Power 11 kW - Speed 100 M/sec - Roller conveyor feeding in - Roller conveyor feeding out - Filtration System ROSER RF 75/9 P/w Capacity 7500M³ - Under power up to 03.2020 - Incl. double brushes for cleaning - Return to sender for grit sand  

16 x 3.2MW 60Hz KAWASAKI Gas Turbine Power Plant Main specifications - Gas Turbine Model: M1T-23 x 16 sets - Maker: KAWASAKI - Power Output: 3,200kWe - Frequency & Voltage: 60Hz & 6600V - Year of Production: 2008 - Running Hours: about 60 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set This gas turbine plant has 16 x 3.3MW gas turbines with the optimal layout of 4 x 4 blocks and was initially installed as an emergency power supply in preparation for major disasters or large-scale power outages in the area. Fortunately, as there has been no serious emergency, this plant has had almost no operation, and the total running hours does not exceed 60 hours for each unit until today. However, as the plant has been regularly checked and well maintained, now the gas turbines units are in the best condition. This power plant is scheduled to be shut down in  ...

used drum shot blast machine Brand: OMSG Type: ROTOFLOW Model: 170-N Year 2000 Registration: 10371/00 Continuous belt shot blasting machine for sandblasting/shot blasting aluminum injection, brass or steel forgings, screws and bolts. Automatic feeding tower. Max unit weight of the piece: 8kg Turbines: 2 x 11kw Turbine diameter: 350mm inverter turbines Special two position valves Filter CURRENT STATUS: Disassembled and stored in our facilities.

Description: Year of construction: probably 1979 Serial number: 274 Smallest display unit: 0.001 mm Zero point can be selected as required Guaranteed positioning accuracy: 0.002 mm Power requirement of the machine: 7 kW Suction capacity of the air compressor: approx. 9 m³/h Working area: Usable table surface: 595 x 320 mm Adjustment range of the table: 400 x 250 mm Stroke of the vertical slide: approx. 500 mm Max. Clearance between the sanding motor and table: approx. 480 mm Distance between spindle center and vertical slide: 310 mm Max. Sanding diameter: approx. 220 mm Sanding diameter with intermediate plate: approx. 280 mm Max. included angle for conical sanding: 12° Sanding head: Vertical stroke of the sanding spindle, infinitely variable: 3 - 110 mm Stroke speed, infinitely variable: up to 6 m/min Speed of the planetary movement, infinitely variable: approx. 5 - 330 rpm Speed rang ...

Description: Year of construction: probably 1986 Adjustment range: In the X-axis (table slide): 900 mm In the Y-axis (sanding head): 600 mm In the W-axis (moving crossbeam): 635 mm Feed speed: In the X- and Y-axis, direct current drive, infinitely variable: 5 - 2500 mm/min In the W-axis, three-phase drive: approx. 800 mm/min Measured value display: Smallest display unit: 0.001 mm Zero point can be selected as required Positioning accuracy (basic deviation X, Y): 0.004 mm Table: Usable table surface: 1020 x 860 mm Permissible table load: max. 800 kg Width of the T-slots: 14 mm Number of T-slots: 7 Distance between the T-slots: 100 mm Working range of the sanding head: Grinding spindle speeds, infinitely variable with electric motors: 4500 - 80000 rpm With air turbines up to 100000 and 160000 rpm Planetary speed, infinitely variable: 5 - 250 rpm Stroke of the grinding spindle sleeve: max.  ...

Transmission wheel made of steam engine Diameter wheel 2m Diameter shaft 170mm Suitable for generators, turbines and steam engines. Price 2,500.00€ plus VAT, ex warehouse

Various spare parts for SOMOS dryers e.g.: gear wheels, electrical parts, desiccant Chambers, filter elements, blowers, heating elements, motros, sight glasses, turbines, magnetic valves or cylinders can be offered on demand.

Belimed WD290 washing and disinfection machine List price: € 52,616.00 net per system WD290 Washing and disinfection machine for machine instrument preparation Automatic washroom door made of double-walled safety laminated glass only in two-door design Applications: Surgical instruments Minimally invasive instruments Conatiner Surgical shoes Laboratory equipment Specifications Features / Components WD 290 Heat emission freestanding 1000 (+/- 200) W Weight with side panel 384 Kg Noise value with side paneling 62 dB(A) Door opens automatically from top to bottom with safety shutdown switch list Material: Frame cladding chrome nickel steel 1.4301, AISI = 304 Material: Washing chamber and door chrome nickel steel 1.4404, AISI 316L Wall thickness wash chamber 1.5 mm Washing pump nominal pump pump capacity 900 l / min Washing pump pump pump operating power op ...

GE LM2500+ For Sale (31.3 MW, 50 Hz): GE LM2500+ natural gas-fired and associated Aalborg HRSG. The GE LM2500+ has a nominal output of 30 MW. The OCGT originally produced steam for local combined heat and power (CHP”) demand, which no longer exists. Due to this, the HRSG is kept in dry preservation and the OCGT operates using the bypass stack, providing black start and short-term operating reserve capability. Open cycle GE LM2500+ GT driving a 36 MVA generator, which is a totally enclosed air-cooled (TEAC”) design rated at 11 kV. The boiler on this unit is currently in dry preservation. The LM2500+, a design based on the very successful heritage of the LM2500 gas turbine, rolled off the production line in December 1996. The LM2500+ was originally rated at 27.6 MW, for a nominal 37.5 percent thermal efficiency at ISO, no losses and 50 Hz. Since that time, its rating has continually  ...

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

BLASTING & PAINTING SYSTEM DMK Co. CONSISTING OF: Air Blast Units, Vacuum Recovery System, Silo Tank. Dust Collector, Bucket Elevator, Rotary Separator, Storage Tank, Chute Hopper, Vacuum Recovery, Collection Tank, Ventilation System; MAIN CHARACTERISTICS: SHOP B (2008/2009); DMK Co.; This system consists of blasting, conveying, restoring, and impinging facility; Room size: W: 50.000 x L:50.000 x H: 17.000; 16 Nozzles, cap 32 ton/hr; Turbines 1509 KW; Abrasive: Steel Grit 0,5mm -1,0mm; Initial Charge Grit: 300 Ton; PAINTING SHOP; Room size: W: 50.000 x L:50.000 x H: 17.000; Dry filtering method; Motor 960KW BLASTING SHOP Ventilation System Dehumidifier (YDHM-CDH-15,000-100) - 1 Unit Fan and blower 120hp - 2 Units per exhaust pipe - 4 units total Exhaust pipe for 120hp fan- 2 units Fan and blower 40hp - 1 Unit Exhaust pipe for 40hp fan - 1 unit Dust Collector Ma ...

Skinetta ASK 450 Penalty Banding Machine Machine Purpose The tightening banding machines of the SKINETTA series serve the purpose of tightening individual products or several individual products with polyethylene film. banding (wrapping). In contrast to shrinking machines, the wrapping film is pulled tightly around the container before sealing. This streamlining is the main advantage of the procedure. The result is up to 20% less film consumption. A special advantage of the patented SKINETTA tightening system is the infinitely variable, fine dosing. The sealing (welding) of the film takes place in the smallest of spaces and a clean sealing seam with very small protrusions is created. By connecting a SKINETTAther or SKINETTAshrink heat cover and using a correspondingly wide film, the film protrusion protruding beyond the container can be shrunk laterally. This pre-singing m ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data 1 column execution Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y axis): 200 mm Travel of the vertical slide: 250 mm Passage from grinding motor to table: 270 mm Max. grinding diameter: 15 mm Vertical travel of grinding spindle: stepless from: 2 mm up to: 32 mm Travel speeds: steps: 2 from: 4.0 m/min up to: 5.0 m/min Possible grinding-spindle speeds: stepless up to: 120000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 750 kg Overall dimensions machine: Length: 1100 mm Width: 1000 mm Height: 1800 mm Various accessories: Rotary table diameter: 300 mm Centering microscop Grinding turbines: steps: 1 max. speed: 150000 rpm Grinding contact indicator

MAN NR34/S026 turbines 1 new and 3 used available New bearings and repair sets also available in our stock in Istanbul Please contact: info@fin-marine

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data 2 columns execution Table: Table length: 1020 mm Table width: 860 mm T-channel width: 14 mm Number of spline: 7 Distance of the T-slots: 100 mm Table load max.: 800 kg Longitudinal travel (X-axis): 900 mm Transversal travel (y-axis): 600 mm Verticla travel (W-axis): 635 mm Feeds: X axis: 5 - 2500 mm/min Y axis: 5 - 2500 mm/min W axis: 800 mm/min Passage from grinding motor to table: 750 mm Max. grinding diameter: 230 mm with display-plate: 360 mm Passage between the columns: 950 mm Max. angle with taper grinding: up to: 16 ° up to grinding depth: 44 mm Vertical travel of grinding spindle: up to: 180 mm Travel speeds: stepless from: 0.015 m/min up to: 7.5 m/min Stroke length Z, infinitely adjustable: 125 mm Radiale fine feed U-axis up to: 6 mm Planetary moti ...

Manufacturer: Solar Turbines INC, San Diego USA Model: Taurus 60 with Solonox combustion, Packager: Turbomach Version: T 7301 Yoc package: 1998 Turbine engine: new engine installed in 2012, only few hours since installation Condition: fully serviced and ready for start. Capacity: 5200 kW Speed: 14.944 U/min continual Fuel: Natural Gas and Light Diesel (dual fuel) Fuel consumption: 122.469 kJ/kWh Burners: 12 Start system: electro.hydraulic, 90 kW Outlet temperature: 486°C Exhaust gas: 21.244 kg/s

x-travel: 400 mm y-travel: 250 mm workpiece height: 485 mm Control: ELESTA CNC 314 total power requirement: 10 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/mi ...

There are 8 identical Enercon E58 wind turbines available, year of construction: 2003, operational since: 2005, control system: CS58b, rated power: 1000kW, hub height: 70.5m, rotor diameter: 58m, operating hours: 132,303h, yield since start of operation: approx. 30 million kWh. Documentation available. On-site inspection is possible.

Key data: 40 , 600

3 x Enogia 40MT ORC Model: 40MT ORC Year: 2017 Hours: 150 Capacity: 40 kW each Heat source: Hot water Voltage: 600 V General Information: Good. Each ORC has only produced circa 6000 kwh. Service history: They have recently (3/2/22) had a diagnosis report by Enogia and found to be in good order. Electrical cabinet is in good condition. The launch of the two turbines simultaneously was a success, the 6000 rpm set point was reached without fault, both in manual and automatic mode. Available for Sale. Price: €60,000 each

Step regulator, electronic regulation, control, azimuth adjustment, yaw box -Manufacturer: Bilfinger, portable electric azimuth adjustment for e.g. wind turbines -Type: IBN Box NES -Motor starter: Siemens Sirius Eo3 4 pieces -Circuit breaker: Siemens 5SY4202-7 2 pieces -Individual components: see photos -Quantity: 8x IBN box available -Price per piece -Dimensions: 400/300 / H475 mm -Weight: 14 kg

Hazard lights, night signs, flash lights, day and night signs -Signal lights for: wind turbines -GF lamp: RE-LED 864 (Red) -Housing: aqua signal -Price: per piece -Number: 2 pieces -Dimensions: 380/356/H290 mm -Total weight: 15 kg

Hazard lights, night signs, flash lights, day and night signs -Signal lights for: wind turbines -GF light: RE-LED 865/864 (White/Red) -Housing: aqua signal -Price: per piece -Number: 2 pieces -Dimension: Ø 356/675 mm -Total weight: 17 kg

Control of wind turbines, frequency converters, frequency converters, drive converters, controllers, variable speed drives -KEB: Combivert P6 pitch converter -Mat.No .: KEB 19P6H7G-YRXO -Power: 36 kVA -Input: AC 400/480 V 50/60 Hz/DC > 150 V -Dimensions: 1610/350/H645 mm -Weight: 146 kg