255 offers

New in: 2008
Price: request quote
Location: Land-de DE
Seller: Czech Industrie Service

Tip height: 125 mm Drehdurchm. altitude support: 140 mm Drehdurchm. ü. bed: 210 mm Turning length: 500 mm Speed range: 50 - 5000 RPM - infinitely variable Total power consumption: approx. 1.5 KW / 400 V Machine weight: 800 kg Equipment / Accessories: 3 axis digital display stepless speed control Multifix quick change Toolpost Splash Guard Chuck protective cover Machines - Fixators Machine lamp Coolant system Documentation All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Each party has the opportunity to test the machine before purchasing power. more

New in: 1983
Price: request quote
Location: Standort
Seller: Wirths GmbH, Werkzeugmaschinen

turning diameter over bed: 1200 mm turning diameter over slide rest: 900 mm turning length: 8000 mm spindle bore: 110 mm spindle turning speed range: 6- 600 U/min total power requirement: 25 kW weight of the machine ca.: 14 t dimensions of the machine ca.: 11 x 2 x 2 m Accessories: Faceplate, Multifix tool holder system, cooling arrangement, rapid movement, 2 steadies, gap in bed for dia. 1400 x 500 mm long. More details on request. more

New in: 2005
Price: request quote
Location: Land-de DE 78267 Aach, Im Hirtenstall 16
Seller: Martin Beschle Werkzeuge & Maschinen GmbH

Cycle-controlled lathe Gildemeister NEF 320 With control MANUAL PLUS 4110 Year of construction: 2005 Spindle bore: 50.8 mm Top width: 750 mm O bed circulation: 320 mm Circulation O over cross slide: 150 mm Tip height: 160 mm Speed range: 10-4000 RPM infinitely variable with the following accessories: Sliding screen design with interior lighting Multifix tool holders 3 jaw Chuck SCHUNK ROTA - S plus 0 200 mm 1 set of soft JAWS ICP contour programming Tailstock with retractable boring Quill Chip tray Coolant system Operating instructions more

New in: 1980
Price: request quote
Location: Nürnberg
Seller: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG

turning diameter over bed: 250 mm turning diameter over bed slide: 195 turning diameter over slide: 135 mm turning length: 390 mm spindle turning speed range: 60 - 3.000 U/min no. of turning speeds: 3 feeds - longitudinal: 15x 0,03 - 0,3 mm/min feeds - cross: 0,015 - 0,15 mm/U spindle bore: 23 mm taper bore: MK 4 quill adjustment: 80 mm tailstock adjustment: 450 mm diameter of quill: 30 mm quill taper: MK2 thread - mm pitch: 0,25 - 5 mm thread - module: 0,25 - 1,75 mm thread - inch: 12 - 96 inch. total power requirement: 1,50 kW weight of the machine ca.: 0,40 t dimensions of the machine ca.: 2,00 x 0,75 x H1,50 m incl. stepless REV control via potentiometer and digital REV indication collet ... more

New in: used
Price: request quote
Location: Land-fr FR 68190 Ensisheim, 10 rue Bartholdi, Z.I. Pôle Ill-Thur
Seller: Retec Machines S.A.S

Parallel lathe CAZENEUVE type HB 725 Between points 1500 mm Maxi Ø on bench 725 mm Maxi Ø over saddle 400 mm Spindle diameter Ø 81 mm Rotation from 14 to 1600 RPM 3-jaws Chuck Ø 310 mm Threadings Metric + Witworth Tailstock CM6 Scale 2 axes FAGOR Bench and trolley rectified in 2004 with 1 fixed steady with 1 lubricant pump with 1 Multifix turret Dimensions (L x W x H) 3500 x 1500 x 1500 mm Weight approx. 4 T MACHINE IN OUR STOCK IN FRANCE. more

New in: 1985
Price: request quote
Location: Heilbronn
Seller: Gustav Schönberger GmbH

turning diameter over bed: 280 mm turning diameter over slide rest: 158 mm turning length: 650 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-jaw chuck Multifix digial read out coolant device Technische Daten: Drehlänge / turning lenght 650 mm Dreh-Ø über Bett / turning- Ø over bed 280 mm Dreh-Ø über Querschlitten / turning- Ø over sledge 158 mm Spindelbohrung / spindle hole 40 mm Spindeldrehzahlen / spindle speeds 48-2500 UpM / rpm Gewicht / weight 680 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich. Technical data, accessories and description of the machine are not binding. more

New in: 2003
Price: request quote
Location: Baden Württemberg
Seller: METEC GmbH

Lathe Manufacturer: Format Type: MD 180 VS Year of construction: 2003 RSF digital display Z 730 Tip height: 180 mm Top width: 1000 mm Circulation maximum diameter over bed: 360 mm Circulation Max Ã? over cross slide 250 mm Bed width: 190 mm Plan travel: 210 mm Upper support stroke: 95 mm Upper support swiveling: +/-90° Work spindle Inner bevel: MK5 Spindle bore: 42 mm Max feed-Ã?: 200 mm Face plates ø: 200 mm Cross slide Tool holder system: Multifix Gr. B Tool holder cross-section Wxh: 25 x 25 mm Plan stroke: 210 mm Quill recording: MK3 Quill diameter: 50 mm Max Quill stroke by hand: 145 mm Number of longitudinal feeds: 13 Spindle spee ... more

New in: 2004
Price: request quote
Location: Lager Ennepetal H 3
Seller: Wirths GmbH, Werkzeugmaschinen

turning diameter over bed: 0850 mm turning diameter over slide rest: 580 mm turning length: 2500 mm centre height: 425 mm centre distance: 2500 mm spindle bore: 105 mm speeds: 8- 1250 U/min feeds longitudinal slide: 0,06 - 1,4 mm/U feeds cross slide: 0,024 - 0,518 mm/U weight of the machine ca.: 4 t dimensions of the machine ca.: 4,5 x 1,8 x 1,8 m voltage: 380 V main drive: 11 kW Machine has a 3 jaw chuck, Multifix tool holder system and DRO. more

New in: 1985
Price: request quote
Location: Land-de Germany, 17034 Neubrandenburg
Seller: Maschinenhandel Neubrandenburg

Lathe NEF 400 Built in 1985 Tip height of bed guide rail: 200 mm Umlufdurchmesser bed: 400 mm Swing over cross slide: 165 mm Swing over cross slide Holm: 370 mm Bed width: 290 mm Prism width: 30 - 24-30 mm Prism height: 12 - 8-12 mm Slide length: 700 mm Slide width: 200 mm Plan travel: 240 mm Multifix: B MeiÃ?elschaft multi fix: 20 x 20 mm MeiÃ?elschaft turret: 20 x 20 mm Headstock: 6 Spindle bore: 48.5 mm Chuck diameter: 160/200 mm Diameter front bearing: 80 mm Capacity: DC 11 kW Max torque: 670 NM Speed range: 16-3150 min TOTAL AREA: 200 Automatically switchable speeds: 3 ber. continuously variable Feed spindle diameter pitch z: 32/10 mm Feed  ... more

New in: 1980
Price: request quote
Location: Lager Ennepetal H 3
Seller: Wirths GmbH, Werkzeugmaschinen

turning diameter over bed: 0800 mm turning diameter over slide rest: 500 mm turning length: 1500 mm centre height: 400 mm centre distance: 1500 mm spindle bore: 90 mm speeds: 28-900 U/min feeds longitudinal slide: 0,06 - 1,4 mm/U feeds cross slide: 0,024 - 0,518 mm/U weight of the machine ca.: 6 t dimensions of the machine ca.: 4,5 x 2,5 x 2,2 m voltage: 380 V main drive: 14,5 kW We supply one faceplate, one fixed steady rest and one Multifix tool holder with one holder along with the machine. There is one set of change gears mounted on the reverse gear box. more

New in: 1978
Price: request quote
Location: Land-de Germany, 73563 Mögglingen
Seller: WMH24

Digital display Heidenhain Swingdiameter 330 mm Turning diameter 170 mm Turning length 800 mm Spindle speed 2800 rpm Multifix B 3-jaw chuck Schunk D 160 mm Condition like new ! more

New in: 2017
Price: request quote
Location: Lager Ennepetal H 2
Seller: Wirths GmbH, Werkzeugmaschinen

turning diameter over bed: 0500 mm turning diameter over slide rest: 300 mm turning length: 1000 mm spindle turning speed range: 9-1600 U/min longitudinal feeds:: 0,063- 2,52 mm/U cross feeds:: 0,027- 1,07 mm/U metric thread: 0,5-224 spindle passage: 82 mm throat: 710 x 240 mm total power requirement: 9 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,6 x 1,4 x 1,6 m DEMONSTRATION MACHINE ! Machine comes with chuck cover (CE conform), cover at toolholder (CE conform), Multifix tool holder system, one fixed steady and one moving steady. Machine is with DRO. more

New in: 1990
Price: request quote
Location: Land-DE Germany, 51149 Köln
Seller: AS Maschinenhandel

Engine type: conventional lathe Make: TOS Type: SUI 63-80 / / 4000 year: ca. 1990 Control type: manual Location: United States Shipping time: immediately / on request Cargo base: From site / Foundation Price / euro / net: on request Technical details Swing over carriage mm: 630 mm Turning length mm: 4,000 mm Swing over cross slide mm: 350 mm Spindle passage mm: 70 mm Control: Manual 2-axis digital display TURN VISION Main drive engine kW: approximately 17 kW Machine weight kg: 6,500 kg The machine can be visited at any time by appointment. Accessories: Multifix steel holder 3 jaw Chuck Additional info: Reserved changes and error in the technical details and specifications more

New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 660 mm turning diameter over slide rest: 420 mm turning length: 2000 mm turning diameter in the gap: 840 mm turning speeds: 36 - 1600 U/min centre height: 330 mm spindle bore: 1ß3 mm tailstock quill taper MT: 5 MK tailstock travel: 150 mm tailstock quill diameter: 75 mm total power requirement: 11 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,6 x 1,1 x 1,45 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse more

New in: 1990
Price: request quote
Location: Land-De Germany, 41334 Nettetal
Seller: CBW Böhmer Werkzeugmaschinen

Engine type: conventional lathe Make: TOS Type: SUI 63 year: ca. 1990 Control type: manual Location: United States Shipping time: immediately / on request Technical details Swing over carriage mm: 630 mm Turning length mm: 4,000 mm Swing over cross slide mm: 350 mm Spindle passage mm: 70 mm Control: Manual 2-axis digital display TURN VISION Main drive engine kW: approximately 17 kW Machine weight kg: 6,500 kg Accessories: Multifix steel holder 3 - jaw Chuck 4 - jaw Chuck 2 steady rests 1-revolving bezel The machines offered by us are machine tools and machines trading AS property of the partner companies of CBW Böhmer. Any dissemination and publishing is allowed only ... more

New in: 1989
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 580 mm turning diameter over slide rest: 320 mm turning length: 1500 mm turning diameter in the gap: 760 mm turning speeds: 20 - 2000 U/min centre height: 290 mm spindle bore: 72 mm total power requirement: 7,5 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,2 x 1,5 x 1,7 m Center lathe 3-jaw chuck 250mm Digital display Multifix toolholder Emergency stop device Rapid traverse bezel machine light Coolant system more

New in: 1972
Price: 9.500 €
Location: Land-pt PT Marinha Grande
Seller: occasionmachines

WEWAG Lathe 400/2000 WEWAG Manufacturer Type S 400/2000 Year of manufacture 1972 With 4 plate clamps, 800 mm diameter, 3-axis Turret Multifix, digital display Technical details: Dimensions (l x w x h) 4300 x 1500 x 1600 mm Approx. weight 5800 kg more

New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1500 mm turning diameter in the gap: 710 mm turning speeds: 36 - 1600 U/min centre height: 250 mm spindle bore: 100 mm tailstock quill taper MT: 5 MK tailstock travel: 150 mm tailstock quill diameter: 75 mm total power requirement: 7,5 kW weight of the machine ca.: 3,45 t dimensions of the machine ca.: 3,1 x 1,1 x 1,4 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse more

New in: used
Price: request quote
Location: Land-fr FR
Seller: Retec Machines S.A.S

Parallel Lathe MULLER & PESANT type CELTIC 12 Between points 600 mm Maxi Ø on bench 310 mm Maxi Ø over saddle 150 mm Spindle diameter Ø 28 mm Rotation from 45 to 2000 RPM Chuck 3-jaws chuck Ø 160 mm (with 1 set of hard jaws + 1 set of soft jaws) Threadings Metric + Witworth Tailstock CM3 Scale 2 axes HEIDENHAIN Auto advances longitudinal + transverse Electrical panel in good condition - AS NEW Multifix turret type A 1 follower steady + 1 fixed steady Lubricant pump Voltage 380 V Dimensions (L x W x H) 1500 x 1200 x 1800 mm Weight approx 1 T MACHINE IN OUR STOCK IN FRANCE. more

New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 600 mm turning diameter over slide rest: 380 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 16 - 710 U/min centre height: 300 mm spindle bore: 64 mm total power requirement: 5,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3,0 x 1,5 x 1,8 m L + Z lathe with - Digital display - Faceplate centric and individually exciting - Multifix steel holder size C with 3 cassettes - Lynette 220mm - chip tray - Machine lamp more

New in: 2001
Price: request quote
Location: 78267 Aach
Seller: Martin Beschle Werkzeuge & Maschinen GmbH

Cycle-controlled lathe Gildemeister NEF 320 With control MANUAL PLUS 3110 Year of construction: 2001 Spindle bore: 50.8 mm Top width: 750 mm O bed circulation: 320 mm Circulation O over cross slide: 150 mm Tip height: 160 mm Speed range: 10-4000 RPM infinitely variable with the following accessories: Sliding screen design with interior lighting Multifix tool holder with 3 inserts Coolant system 3 jaw Chuck SCHUNK ROTA - S plus 0 160 mm 1 set of soft JAWS ICP contour programming Tailstock with retractable boring Quill Chip tray Coolant system THE machine has only 7050 duty hours operating instructions! more

New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 680 mm turning diameter over slide rest: 440 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 45 - 2000 U/min centre height: 340 mm spindle bore: 57 mm total power requirement: 7,5 kW weight of the machine ca.: 3,7 t dimensions of the machine ca.: 3,1 x 1,5 x 2,0 m Center-Lathe 3-jaw lining Multifix steel holder size C with 4 cassettes Emergency stop device Cooling water pipe machine light more

New in: used
Price: request quote
Location: Chemnitz
Seller: Norbert Gottwald Werkzeugmaschinen

Turning diameter over bed 330 mm Turning diameter over support 170 mm distance between centres: 800 mm Spindle speeds 24-2800 RPM Feeds - along 0,026-1,253 mm / Rev Feeds - plan 0.013 - 0,626 mm/Rev Spindle bore 38 mm Machine weight approx. 0.8 t Space requirement approx. 1.8 x 0.7 x 1.2 m Quick-change holder Multifix with cassettes Chuck guard more

New in: 1967
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 810 mm turning diameter over slide rest: 580 mm turning length: 1500 mm centre height: 420 mm bed width: mm spindle bore: 75 mm turning speed range - spindle: 9 - 900 U/min feeds: bed slide/longitudinal: 0,05 - 5 mm/U feeds - cross: 0,025 - 2,5 mm/min turning diameter in the gap: 840 mm total power requirement: 18,5 kW weight of the machine ca.: 5,4 t dimensions of the machine ca.: 3,8 x 1,6 x 1,4 m Center lathe with - Forkard wedge bar chuck, F 500 - Multifix size D - Digital display - Feed in the upper support - rapid traverse - conical rotating device - Coolant device Very good condition! more

New in: 1969
Price: 4.500 €
Location: Philippsburg
Seller: W&T EFRA

Lathe Saeed UD 630 Built in 1969 Machine number: 16615 Round Ã? bed 650mm Round Ã? over slide 420mm Top width 1000 mm Three-jaw Chuck Ã?315 Multifix Additional gear for slow speeds More specifications: see machine card the following accessories are present on the machine: Copy Setup Faceplate 2. feed Bezel The machine has the dimensions approx. 3 m x 1.2 m x 1.4 m and a weight of approx. 4,000 kg. The machine is in perfect condition and works perfectly. For questions we are anytime even enacted at the disposal. We look forward to a good cooperation and thank you for your interest in advance. more

New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 380 mm turning diameter over slide rest: 240 mm turning length: 1000 mm turning diameter in the gap: 520 mm turning speeds: U/min centre height: 190 mm spindle bore: 52 mm tailstock quill taper MT: MK tailstock travel: mm tailstock quill diameter: 80 mm total power requirement: 2,9 kW weight of the machine ca.: 12, t dimensions of the machine ca.: 2,8 x 1,3 x 1,4 m - 3-jaw chuck with reversible jaws - Coolant system - Multifix steel holder with 4 cassettes more

New in: used
Price: 10.500 €
Location: Land-nl Netherlands, 5061 Oisterwijk
Seller: Veltman Machines BV

Toolroom lathe Schaublin 135 Centre distance: 630mm Centre height: 135mm Spindlebore: 40mm Spindelspeeds: 45-3000 With a set of C5 collets Scroll chuck 160mm with inner and outer jaws Multifix A QCTP with 4 toolholders Powerfeed Tailstock Spindlespeed adjustable over variator Spindlenose Camlock D1-4 No brake more

New in: used
Price: request quote
Location: Velen-Ramsdorf (46342)
Seller: WMT GmbH & Co. KG

turning diameter over bed: 380 mm turning diameter over slide rest: 160 mm turning length: 600 mm spindle bore: 56 mm speeds: 28 - 1250 U/min weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2,5 x 1,1 x 1,5 m Cente lathe with - Forkard chuck 200mm - Quick change holder Multifix B - revolving center point more

New in: 1996
Price: request quote
Location: Land-de Germany, 73563 Mögglingen
Seller: WMH24

Control Fanuc Swing diameter 460 mm Distance between center 1500 mm Spindle speed 2000 1 / min Multifix Tailstock Steady rest 3-jaw chuck more

New in: 1963
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

swing diameter: 800 mm centre height: 400 mm turning diameter over slide: 340 mm turning dia. in gap: 1160 mm turning length: 4000 mm turning speed range: 4 - 710 U/min tailstock taper MT: 5 total power requirement: 11 kW weight of the machine ca.: 7,0 t dimensions of the machine ca.: 1,7 x 3,7 x 1,6 m Sliding bed lathe with: - Digital display - Multifix steel holder size C with 2 pcs. Cassettes - Faceplate 800mm - 2 pcs. Lynetten 240mm and 470mm - Coolant system more

New in: 1982
Price: request quote
Location: Land-DE Germany, 74626 Bretzfeld
Seller: Schraag Werkzeugmaschinen GmbH

with 3-axis digital display and removable bridge. Tip height 250 mm Swing in sweep approx. 700 mm Top width 1500 mm Spindle bore 60 mm Spindle speeds of 16-1600 rpm. Output approx. 6 kW Weight approx. 3,2 t Accessories: Coolant system, faceplate diameter 500 mm, 3 - jaw Chuck RÃ?HM type Duro, Multifix Toolpost, multiple length stop, machine light. more

New in: 1970
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 530 mm turning diameter over slide rest: 350 mm turning length: 1500 mm turning diameter in the gap: 530 mm turning speeds: 18 - 1400 U/min centre height: 270 mm spindle bore: 88 mm tailstock quill taper MT: 5 MK tailstock travel: 170 mm tailstock quill diameter: 80 mm total power requirement: 12,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,7 x 1,5 x 2,0 m - 3-jaw chuck with reversible jaws - Coolant system - Multifix steel holder with 4 cassettes more

New in: used
Price: request quote
Location: Farnweg 5, 86161 Augsburg, Deutschland
Seller: rinke + Partner GmbH

Sph 280 mm Spw 2000 mm Umlauf in Kröpfung Ø 760 mm Spindelbohrung Ø 85 mm Futter Ø 315 Multifix C 3-fach Digital U/min. 30-1500 1 Lynette 4-Backen-Futter Ø 315 mm Planscheibe Ø 400 mm Stellmaße: ca. L 3,7 m x B 1,3 m x H 1,5 m Gewicht ca. 2,6 To more

New in: 1980
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 625 mm turning diameter over slide rest: 385 mm turning length: 2500 mm turning speeds: 7 - 1070 U/min centre height: 300 mm spindle bore: 62 mm total power requirement: 20 kW weight of the machine ca.: 5,2 t Dimensions (LxWxH): 4,7 x 1,4 x 1,6 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse more

New in: used
Price: request quote
Location: Farnweg 5, 86161 Augsburg, DE
Seller: rinke + Partner GmbH

Sph 254 mm Spw 1500 mm Spindelbohrung 57 mm 3-fach Digital Multifix C Spannfutter Ø 250 mm Reitstock Gewicht 6 To more

New in: used
Price: request quote
Location: Velen-Ramsdorf (46342)
Seller: WMT GmbH & Co. KG

turning diameter over bed: 330 mm turning diameter over slide rest: 210 mm turning length: 635 mm turning diameter in the gap: 480 mm turning speeds: 58 - 2500 U/min centre height: 167 mm spindle bore: 40 mm tailstock quill taper MT: 3 MK total power requirement: 2,2 kW weight of the machine ca.: 0,8 t Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse more

New in: 2001
Price: request quote
Location: Farnweg 5, 86161 Augsburg, DE
Seller: rinke + Partner GmbH

Masch.Nr. 450 Siemens 810 Multifix C Dreh-Ø 500 mm Spw 1500 mm Spindelbohrung Ø 90 mm Reitstock 18 kW Stellmaß: ca. L 3,2 m x B 1,56 m x H 1,85 m, Gewicht: ca. 2,6 to more

New in: 2016
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning diameter in the gap: 506 mm turning speeds: 36 45 - 1800- 1600 U/min centre height: 180 mm spindle bore: 38 mm tailstock quill taper MT: 3 total power requirement: 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,2 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse more

New in: 2003
Price: request quote
Location: Land-cz Czech Republic, 60200 Brno
Seller: AMARON s.r.o.

COperating hours approx.: 35000 Control system: HEIDENHAIN Manualplus 4110 Turning over bed: 400 mm Turning over carriage: 230 mm Turning length: 800 mm Spindle bore: 64 mm Speed range: 1-3000 rpm Feed range Plan: U 0.001-1000 mm Accessories: Chuck Steady rest Tailstock Tool holder Multifix B 2 pieces driven tools (radial + axial) Turret Availability: 01.01.19 more

New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 1000 mm turning diameter in the gap: 530 mm turning speeds: 65 - 1810 U/min centre height: 205 mm spindle bore: 52 mm tailstock quill taper MT: 4 total power requirement: 2,2 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,3 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse more

New in: used
Price: request quote
Location: Land-DE Germany, 57581 Katzwinkel
Seller: Maschinendrehpunkt

L + Z lathe Meuser M0 L Top width 1000 mm Top height approx 210 mm removable bridge maximum workpiece diameter approx. 510 mm RPM - spindle 25 ~ 1250 RPM Spindle bore ca 50 mm 12 gear stages -Spindle motor 3.5 kW Tailstock spindle mount MT 4 Multifix tool holder 2 pockets Machine weight approx. 1,3 t Built in 60s more

New in: used
Price: request quote
Location: Velen-Ramsdorf (46342)
Seller: WMT GmbH & Co. KG

turning diameter over bed: 370 mm turning diameter over slide rest: 230 mm turning length: 700 mm turning speeds: 25 - 2000 U/min centre height: 185 mm spindle bore: 40 mm tailstock quill taper MT: 3 MK total power requirement: 3,2 kW weight of the machine ca.: 1,2 t Dimensions (LxWxH): 1,85 x 0,8 x 1,5 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse more

New in: 2003
Price: request quote
Location: 78267 Aach
Seller: Martin Beschle Werkzeuge & Maschinen GmbH

Cycle-controlled lathe Gildemeister NEF 320 With control MANUAL PLUS 4110 Year of construction: 2003 Spindle bore: 50.8 mm Top width: 750 mm O bed circulation: 320 mm Circulation O over cross slide: 150 mm Tip height: 160 mm Speed range: 10-4000 RPM infinitely variable with the following accessories: Sliding screen design with interior lighting Edwards powered tool with 2 inserts Multifix tool holder with 5 PCs. Multifix inserts 3 jaw Chuck SCHUNK ROTA - S plus 0 200 mm 1 set hard + 1 set of soft JAWS Collet Chuck with 12 collets 1 face plate 0 350 mm ICP contour programming Tailstock with retractable boring Quill Chip tray Coolant system 6 PCs. machine shoes Operati ... more

New in: used
Price: request quote
Location: Velen-Ramsdorf (46342)
Seller: WMT GmbH & Co. KG

turning diameter over bed: 330 mm turning diameter over slide rest: 178 mm turning length: 1000 mm turning diameter in the gap: 450 mm turning speeds: 70 - 2000 U/min centre height: 165 mm spindle bore: 38 mm tailstock quill taper MT: 3 total power requirement: 1,1 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,9 x 0,72 x 1,4 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse more

New in: 1976
Price: 8.000 €
Location: Neubrandenburg
Seller: Maschinenhandel Nord

BOEHRINGER D 490 Built in 1976 Tip height 240 mm Top width 1000 mm Turning diameter over bed 490 mm Turning diameter over support 295 mm Spindle bore 51 mm Spindle speeds 31-2800 RPM Spindle motor 15 kW Feeds 0.05 20 mm / Rev Plan travel 245 mm Upper carriage travel 125 mm Bed width 360 mm Tailstock Quill diameter 75 mm Tailstock Quill stroke 200 mm Live recording MK 5 Dimensions Lxwxh 3000 x 1660 x 1640 mm Accessories: MULTIFIX steel holder with various missions. fixed bezel more

New in: used
Price: request quote
Location: Velen-Ramsdorf (46342)
Seller: WMT GmbH & Co. KG

turning diameter over bed: 370 mm turning diameter over slide rest: 230 mm turning length: 700 mm turning speeds: 25 - 2000 U/min centre height: 185 mm spindle bore: 40 mm tailstock quill taper MT: 3 MK total power requirement: 3,2 kW weight of the machine ca.: 1,2 t Dimensions (LxWxH): 1,85 x 0,8 x 1,5 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse more

New in: used
Price: request quote
Location: Unterweiden 108, 47918 Tönisvorst, Deutschland
Seller: KMS Gebrauchtmaschinen

Multi fix steel holder Type D1 50180 more

New in: used
Price: request quote
Location: Velen-Ramsdorf (46342)
Seller: WMT GmbH & Co. KG

turning diameter over bed: 420 mm turning diameter over slide rest: 250 mm turning length: 1000 mm turning diameter in the gap: 580 mm turning speeds: 45 - 1800 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 4 total power requirement: 4,4 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 1,94 x 0,85 x 1,32 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse more

New in: used
Price: request quote
Location: Unterweiden 108 und 122, 47918 Tönisvorst, DE
Seller: KMS Gebrauchtmaschinen

Multi fix steel holder Type D1 50180 more

New in: 1982
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 500 mm turning diameter over slide rest: 285 mm turning length: 1800 mm turning diameter in the gap: mm centre height: 285 mm spindle turning speed range: 11,2 - 2240 U/min power capacity: 11 kW spindle bore: 62 mm dia. of quill: 80 mm quill stroke: 190 mm weight of the machine ca.: 3,0 t dimensions of the machine ca.: 3,8 x 1,5 x 1,7 m Equipped with: - Multifix steel holder size B with 3 pcs. Cassettes - Forkhardt three-jaw chuck F250 - Coolant system - Machine lamp - Emergency stop facility more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more MULTIFIX types: