We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,049 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Product number: 2766J Type: T300 Serial number: 236687 Year of construction: 2016 Capacity: 6 - 10 cycles/min. Dye 1: +/- 200 x 135 mm Dye 2: +/- 248 x 145 mm Compressed air: 7 bar Cooling water: 1.5 Bar Power: 3 x 400V, 50Hz, 6.6kW Dimensions: 2600 x 1150 x 1700 mm Weight: 1100 kg For vacuum and gas flush
used
Used labeller, also as a stand-alone solution, MULTIVAC, type: L310 -El. Connection: 3x 400 V, 50 Hz, 2,000 VA
used
Product number: 2791J Type: T800 Serial number: 180781 Year of construction: 2014 Capacity: max 15 strokes/min. Dye: (6x) +/- 133 x 203 mm Tray depth: max 150 mm Power: 3 x 415V, 50Hz, 8.4kW Dimensions: 4550 x 1000 x 2000 mm Weight: 1700 kg Including WW10 tool changing trolley and RS800 shelving system
used
Vacuum packaging machine Multivac C 500, built in 1999, 1st hand, barely used, no meat or fish was packaged, clean condition, Chamber dimensions: width 660mm, depth 750mm, height 200mm, Seal length: 2 x 650mm, External dimensions: width 1,600mm, depth 1,050mm, height max.: 1,320mm, Performance: approx. 2 cycles/min, Voltage: 400 volts, Weight: approx. 700kg, 6 gas nozzles per rail, protective gas device, Sealing rail with water cooling, Machine mobile, 1 piece rotary vacuum pump, Busch R5-RA 0250, 1-stage 250m3/h suction power, Dimensions / weight: LxWxH: approx. 3,100 x 1,000 mm x 2,000 m (without lifting and tipping device), weight approx. 800 kg
used
Chamber dimensions(LxBxH): 660x740x220 mm Machine dimensions(LxBxH): 1600x1100x1350 mm Seal bar length: 2 x 660 mm Gas injection Pump capacity: 160 m³/h Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 8,5 kW ; 24 A
used
: mit Absaugvorrichtung frequency: 60 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Bundle packer • Packing sizes in feeding direction max. width 400, depth 450, height 300 m • Foil width max. 530 mm • Output max. 25 packs/min • 2 infeed conveyor • 1x for folding boxes, product width max. 220 mm • 1x for bottles/cans, product width max. 80 mm • Stacking device for folding boxes • PLC Siemens S7-300 • Simatic touch panel • Connection 400V/50Hz/2kW Shrinking tunnel • Tunnel width 450 mm • Tunnel height ca. 260 mm • Tunnel length 800 mm • Max. heating temperature 300 °C • Grid band (speed adjustable) • Digital temperature monitoring • Cooling fan • PLC Siemens S7-300 • Connection 400V/50Hz
used
DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consists of: Multigraph PFA 52 Bow feeder - Format: max. 520x750mm; min. 120x120mm - Paper types: 60 g/m² to 500 g/m² – depending on substrate - Paper stack height: 600mm - Current: 100 - 240 VAC, 50-60 HZ On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote
used
DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consists of: Multigraf PST 52 Stacking delivery - Format: max. 520x750mm; min. 120x120mm - Paper Grades: 60-500gsm - Paper stack height: 600mm - Paper cart: standard, 2 units - Speed: 5-150 m/min; depending on the configuration - Paper feed height: 870/950/1050 mm On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote
used
Multivac T200 Tray sealer 2007, Stainless, twin tooling currently set to seal a 200mm x 130mm tray, mobile, 3Ph
used
⦁ Station No. 1 Charger for cardboard packaging with packaging remover from the charger ⦁ Station No. 2 Box former ⦁ Station No. 3 Station for inserting products ⦁ Station No. 4 System of closing boxes with sticky hot glue ⦁ Station No. 5 Closing the box ⦁ Station No. 6 Exit conveyor -The system of closing the box with hot glue is carried out using the device of the Italian manufacturer "Preo".
used
Multivac R140 thermoformer, Offered with 1 mould, dimensions is the photo album., Vacuum pump is not included but can be offered optional.
used
Multivac R 230, year of manufacture 2001, film width 355 mm, draw-off length 210 mm, free loading section of 1,6 m, MC96II control with LCD monitor, 10 mm side trim, two cross-cut guillotines, height-adjustable discharge conveyor, central chain lubrication, new servo inverter for chain feed, Vario tool with interchangeable formats. Format: 1.1 . 335 mm x 210 mm 2.1 - 167.5 mm x 210 mm 2.2 - 167.5 mm x 105 mm 3.1 - 111.66 mm x 210 mm Total length of the machine 5,15 m Operational and wear parts replaced.
used
Battery charging cabinet, battery, emergency power battery, emergency power battery, emergency power system, power supply system, lead battery -Manufacturer: multipower, 2 lead batteries mounted on the base plate. -Power: 12 V 7.2 Ah each -Dimensions: 200/200/H120 mm -Weight: 5.6 kg
used
Quick change tool holder, tool holder head, quick change tool holder -Quick change toolholder holder: without tension clamp -Manufacturer: Multifix -Size: D -with mounting for: mounting on the support -Dimensions: 278/250/263 mm -Weight: 33 kg
used
Used packaging machine by Multivac type R 245. New 2010. Packaging machine: - produces vacuum and aerated packaging from deep-drawn and sealable bottom soft or thick film, combined with sealable top film. - has two packaging formats : 250g cube with pack size 145x92.25x approx. 40 mm 500÷600g cube with pack size 188.5x145x approx. 40 mm Power supply 400 V / 50 HZ 3/PE AC phases Rated power 15 kW Nominal current 39 A Max. precharge 50 A
used
Manufacturer: Multivac Model: Thermoforming Packaging Machine R 145 Multivac Thermoforming Packaging Machine Model: R 145 Frame length: 4000 mm Nominal machine width: 320 mm Mains voltage: 400 V Machine voltage internal: 400 V Year of construction: 2010 Bought in 2020, very neat condition. Purchased for product development Performance and Capacity: Number of tracks: 2 Number of rows: 1 Drawing depth: up to 70 mm, adjustable in 5 mm increments Tool spacing: approx. 2475-3050 mm Electrically driven F145 hoists for moulds (4-point suspension) and for seals (2-point suspension), opening width of 150 mm each for top foil holder and bottom foil holder F 22, 3" core diameter Edge strip winder RSW 22 for max. strip width 60 mm per side
used
mobile welding smoke filter, welding smoke extraction -portable -Extraction connection: 1 -Drive: 1 kW -Volume flow: max. 170 m³/h -Number: 1x available -Weight: 20 kg
used
Inv. Num. : 7223 Type: 1325-300W Producer: MultiTech Created: 2017 Parameters: Laser power: 5 kW Work table length: 2500 mm Work table width: 1300 mm Maximum sheet thickness when cutting (stainless steel): 4 mm Cutting speed: 500 mm/s
used
Tool quick coupler used and new, different sizes Partly Multifix, C , B , A, E, ... Can also offer them new ones. Assembly on request or self-assembly !
Well-maintained thermoforming machine Multivac R 240 , soft film , film width 430 mm , take-off 530 mm , 5 different formats. Fumigation. Machine in production until Feb. 2024. Length of the machine approx. 9.5 meters
Multivac R 240, film width 430 mm, fume hood 530 mm, 5 formats, soft film, fumigation, good condition. Still in production until February 2024
used
Manufacturer: Kason Model: K60-3-304SS Year : 2018 Type : Standard vibrating screen with one or more levels Diameter ? :150 cm / 60 Materials : stainless steel Separation screens : 2 Available screens : 2 Mesh size : 4 mm / 2 mm Frame / sieve locking system for transport
used
Multivac AG6 swing top vacuum packer Swing top vac packer, twin chamber, 450mm sealing bars, buusch vac pump, mobile, 3Ph
used
The Multivac R535 packing machine from 2012 is about 11.3m long. It has a 607 mm upper film and a 623 mm undercarriage.
used
Max. size= 65 x 35 cm, Availability= 092023, Max. Size 35 x 65 cm; Min. Size 9 x 12 cm; 1st-folding unit with 2 parallel folds 2d- folding unit with 2 parallel folds The weight of the processed paper 40-240 g Folding speed up to 30,000 sheets / h Power supply 230V / 50Hz / 1.3 A 2 shafts for scoring perforating and slitting compressor LOT Loaded in truck or container
used
Multivac thermoformer, type: R145, serial number: 269046, year of construction: 2018, 400/230 V, 3 Ph, 50 Hz, 27 A, 6.5 kW, dye: 360 mm x 280 mm, index: 410 mm, plastic mesh outfeed belt, belt width: 380 mm, total dimensions: 4800 mm x 1100 mm x 2200 mm. Including 2 Busch vacuum pumps, type: RA 0160 D 501 and RA 0302 D 503, serial number: C1829000106 and C1829000219, year of construction: 2018, capacity: 160 m³ per hour and 300 m³ per hour, dimensions: 1000 mm x 800 mm x 900 mm and 1100 mm x 800 mm x 900 mm, DTE water chiller, type: K-003.6, machine number: D1885000186004, refrigerant: R407C, volume: 1.1 kg, extra dye, dye: (2x) 240 mm x 150 mm.
used
A device for closing trays by Multivac with a capacity of up to 20 cycles per minute. This Multivac T700 packer is in very good condition with only 429 operating hours. This particular model comes with the SKIN packing tool. Tray size: 238 x 166 (D13); New Busch vacuum pump 360m3 / h; Input conveyor; Water cooling unit; Instructions;
used
Multivac C 500 is double chamber packing machine. This one with vacuum and gas flushing system. Double chamber machines from MULTIVAC are easy to operate, clean and service. They offer the highest output on the smallest footprint and also provide impressive performance over their entire machine life thanks to their production output and pack quality. The evacuation and gas flushing processes are pressure-controlled and thus guarantee reproducible packing results. MC 06 machine control with precise vacuum measurement in the chamber Machine dimensions W x D x H (with open chamber lid) in mm: 1,600 x 1,055 x 1,365 Sealing bar arrangement/dimensions: 1 x front, 1 x rear (2 x 650 mm)
used
Multivac thermoform packaging machine for kashar cheese /cheddar Lifting system for preheating Down film(soft) : Width : 357 mm Thickness : 200mm Up film(Soft) Width : 340 mm Thickness : 80 mm
used
Complete set and technical characteristics of the car: Format Tool: - Format 3 pieces 1-2, 2-2, 3.2 - Package height 5 / 35-15 / 45 mm, spacers 5 mm each - The bottom of the tray is even, smooth - Perimetric sealing plate - Packing type MGS - Type of the bottom film - soft (re-equipment on a rigid film is possible). - Productivity up to 6 cycles per minute General characteristics - Film width 420 mm (+ 2 / + 4) - Film thickness up to 300 microns - Width 650 mm - Height 2200 mm - Frame length 5600 mm 7 color touch screen control panel in Russian Possibility to store 20 programs password to access settings (three levels) display of the current state of the machine program test, washing program at closed stations (30 ° C) Unwinder bottom film for 3 cores, max. Ø 400 mm compressed air - Preheat film on top - Laying length 1500 mm - Vacuum pump Busch R5 100 m3 / h ...
used
High-performance thermoforming packaging machine from MULTIVAC - ALSO SUITABLE FOR RIGID FILM - Film width 420mm - With many extras - Double format (therefore 2x speed)
used
The machine will be shipped with 3 tools: Tool 1: 2:1 packagingsize 225×170mm (variable forming depth max. product height 80mm); Tool 2: 3:1 packagingsize 225×110mm (variable forming depth max. product height 80mm); Tool 3: 3:1 packagingsize 195×110mm (variable forming depth max. product height 80mm);
used
Multivac T700 automatic traysealer (skin) Excellent high-speed traysealer from Multivac. This pre-owned T700 is in very good working condition and is from 2014. The automatic traysealers from MULTIVAC are suitable for industrial use – for packaging foodstuffs, medical and pharmaceutical products, and industrial and consumer goods. They seal trays made from various materials, such as plastic, aluminum, cardboard, and foamed materials, as well as a large variety of cover films. These machines enable a fast and efficient pack output with gentle tray handling. Shipped without tool; Optional: New Busch 360m3/h vacuum pump; Infeed conveyor belt; Power 4,2 kW Power supply 400/230 V Height 2100 mm Width 1000 mm Length 4900 mm Weight 1300 kg
used
Multivac R 145: Thermoformer 2017 production. Production Germany. The machine is operational. Tray molds included.
used
The machine is in production. Fully functional in very good condition. Only used once a week. Pump Busch R5 300m3 5 tools: see drawings There is also a new compressed air compressor.
used
Thermoforming machine Manufacturer: Multivac Model: R 530 Year of manufacture: 2001 Film width 547 mm (Jumbo roll) Advancement 612 mm With dual mold sets: Ø 140 mm (9x) with stamper 132 x 140 mm (12x) For gas pack Incl. gas mixer and oxygen measuring Incl. ink jet printer and label applicator Incl. a booster pump and 2 external back pumps With central lubrication The machine has been frequently maintained and overhauled and appear in extremely good condition
used
Sleeve wrapping line MULTIPACK/IT type 479 with shrink tunnel, year of manufacture 2001. The products are conveyed through a curtain of shrinkable foil and closed by a sealing device at the end of the packing system. Right afterwards, the packing unit is conveyed through a shrink tunnel causing the foil to shrink up and firmly enclosing the packing unit. This way, the packages can be secured against reopening and the multipacks again falling apart. The shrink tunnel has a wire belt width of approx. 300 mm, passage height approx. 300 mm, length approx. 1000 mm.
used
Multivac C400 vacuum sealer, single-chamber unit on castors, with a new membrane keypad (the old one can still be seen in the photo), Gardener Denver 15cbm/h pump, with 3 shelves, year of construction 2008, chamber dimensions approx. 60x45x17cm, Connection 400V, total dimensions LxWxH approx. 86x75x103cm, weight approx. 270kg, used, functional
used
Multivac mobile double chamber vacuum machine, type: C 500, machine number: 318, year of construction: 1996, 400 V, 3 Ph, 50 Hz, 24 A, 8.5 kW, seal length: (4x) 660 mm, dimensions chamber: (2x) 660 mm x 740 mm, Busch vacuum pump, type: RA 0250 C 4ZI, QMZZ, capacity: 250 m³ per hour, total dimensions: 1650 mm x 1050 mm x 1050 mm.
used
Multivac thermoformer, type: R535, machine number: 124653, year of construction: 2009, 400 V, 3 Ph, 50 Hz, 90 A, 32.5 kW, dimensions dye: (12x) 200 mm x120 mm, index: 735 mm, plastic outfeed mesh belt, belt width: (4x) 110 mm, total dimensions: 14300 mm x 1800 mm x 2200 mm. Including Multivac film suction device.
used
Multivac R085 Seeking an entry-level thermoformer with exceptional adaptability? Look no further than the Multivac R085! This powerful machine seamlessly integrates into diverse production lines, tackling standard applications with an impressive level of configuration. Unmatched Versatility: 5 Diverse Tooling Options: Choose from 1×1, 1×3, 2×2, 4×1, or 4×2 configurations to perfectly suit your packaging needs. Flexible Packaging Sizes: Create packages ranging from 100×97.75mm to 375x185mm, accommodating various products. Adjustable Forming Depth: Adapt to product heights up to 80mm for optimal presentation and protection. Additional Highlights: User-Friendly Operation: Streamline your workflow with an intuitive interface. Durable Construction: Built to last in demanding production environments. Cost-Effective Solution: Ideal for businesses seeking performance without break ...
used
Make : MULTIVAC Model : TS 250 Y.o.m : 2009 Condition : Good
used
Full packing line available used in the cheese industry., This line has been very well maintained and is in a superb working condition., The line has been professionally taken out production and stored in our warehouse., Have a look at the video for an overall impression of the line, please reach out for more information., - Weber CCA in-line system., - 2 lane to 4 lanes, - Multivac R530 thermoformer, - Film width; 600m, - Advance; ±600mm, - Top and bottom labeler with a printer for the bottom label, - Jumbo film holder, - Mark-reader for pre-printed film, - Robert-pack pick and place robot
used
Multivac R535 thermoformer, very very well maintained 2012 machine., Machine with a very consistent high output., Available straight from production late April 24, - Rigid bottom film, - Possible rigid top-film for a lid, - Top and bottom labeler with printer for the bottom labeler., - 600 mm film width, - ±600 advance/ stroke.
used
Description: please also have a look at the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 400 x 400 x 200 mm, weight approx.: 15 kg
used
Multivac thermoformer, type: R126, serial number: 228804, year of construction: 2016, 400/230 V, 3 Ph, 50 Hz, 32/50 A, 9 kW, film width: 435, index: 390 mm, Busch vacuum pump, type: RA 0100 F 503, capacity: 100 m³ per hour, total dimensions: 5800 mm x 1150 mm x 2150 mm. Including trolley with dye sets. dyes: (2x) 165 mm x 367 mm, (9x) 115 mm x 106 mm, (6x) 106 mm x 177 mm and (3x) 106 mm x 367 mm, dimensions trolley: 1300 mm x 710 mm x 1040 mm. Without rollies.
used
Multivac traysealer, type: T300, serial number: 146178, year of construction: 2011, 400/230 V, 3 Ph, 50 Hz, 21 A, 5.5 kW, conveyor width: 475 mm, film width: 470 mm, dimensions dye: (2x) 290 mm x 190 mm, with Busch vacuum pump, type: RA 0100 F 503, number: 110054972, capacity: 100 m³ per hour, total dimensions: 2430 mm x 1100 mm x 1690 mm. Including crate with parts.
used
Multivac thermoformer, type: R105MF, serial number: 259193, year of construction: 2018, 400/230 V, 3 Ph, 50 Hz, 40/50 A, 12 kW, film width: 435, index: 280 mm, Busch vacuum pump, type: CB 0220 D, capacity: 220/80 m³ per hour, total dimensions: 4500 mm x 1150 mm x 1810 mm. Without rollies.
used
Description: Multifix quick change chisel holder suitable for turning diameter of 200 - 400 mm max. chisel size 20 mm fitted with 1x mother block 3x block for square chisel 1x block for round chisel (v-groove) wrench and socket delivered in original packaging unused Approx. Onsite Dimension. (l x w x h): 290 x 230 x 150 mm, weight approx.: 8 kg