129,088 used machines on RESALE, but how to find them? Machine Search
pressure:400 t distance between columns:1060 mm stroke:450 mm no. of strokes:15 - 30 /min distance table/ram, max. stroke up, adjustment up:1160 mm table surface area:1000 x 700 mm capacity of ejector in table:2 x 16 t ejector stroke of ejector in table:125 mm Die cushion pressure in table:120 t Die cushion stroke in table:2 mm capacity of ejector in ram:2 x 4 t stroke of ejector in ram:100 mm ram surface:1000 x 700 mm column travel -side:630 mm power capacity:55,0 kW weight:50,0 t die cushion in table:2. station
Capacity: max 80 packs/min., Glue unit: Nordson Problue 4 hot melt, Power: 3 x 400V, 50Hz, Dimensions: 7500 mm x 1550 mm x 2900 mm
Width: 650 mm, Length: 1650 mm, Infeed height: 1070 mm, Slit: 2 mm, Power: 3 x 400V, 50Hz, 16A, Dimensions: 1800 x 1250 x 1200 mm, Weight: 1000 kg
Width: 450 mm, Length: 1800 mm, Infeed height: 1350 mm, Slit: 2 mm, Power: 3 x 400V, 50Hz, 16A, Dimensions: 1900 x 1100 x 1450 mm, Weight: 860 kg
General SKU256W336 MakeDeller LocationBarneveld CEcheck Type40m2 Pressure Vacuum possiblecheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface40 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Verticalcheck Heating surface40 m2 Tube capacity550 l. Tube diameter25 mm Tube length2535 mm Max. temperature0°C/+200°C Shell capacity265 l. Shell diameter600 mm Shell length2750 mm Max. temperature0°C/+200°C Shell connectionsDN250 Information No.39588/2 Year of construction2017 Floorspace0,80x0,80 m Total height3,10 m Weight1150 kg Extra Specifications- multi-pass systemPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeShell and tube heat exchangersFine chemicalsStarc ...
General SKU392U1284 LocationBarneveld MakeSKAN Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4401 (316) Filtercheck Filter surface± 0,03 m² Information TypeAFS 002 Year of construction1992 Floor space1,1x0,95 m Total height1,8 m Weight230 kg Extra Specificationsdata vessel: brand: De jong gorredijk B.V. vollume: 100 Ltr. material: 1.4401 pressure: 4bar max temp.: 50°C year: 1992. flow meters: Brand: Endress+hauser type: promag 53 pump: brand: socsil-inter sa Type: A1 24000 nr: 10156 year: 1994 motor: 0,75kW, 220/380Volt 583rpm Fine chemicalsBiotechnologySolventsMiscellaneous filtersSKANIndustries > Chemical > Fine chemicalsIndustries > Chemical > BiotechnologyIndustries > Chemical > SolventsFilters > Miscellaneous filtersBrand > SKAN What you can expect from Foeth: -- Machine is in working condition -- At a r ...
Overview This isobaric filler was manufactured in 2011 by the German company ICS (Industrial Control Systems). The multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 model is a high-precision filling system equipped with 24 electro-pneumatic filling valves featuring double pre-evacuation, ensuring low oxygen pickup and optimal filling performance for beer and other carbonated beverages. The monobloc system includes both a 6-head crown capper and a 6-head screw capper, offering flexible closure options. The machine has 7,200 operating hours, is in very good condition, and offers a maximum capacity of 6,000 bottles per hour. Technical data Application: Beer and other carbonated beverages Capacity: 6,000 bph Filling Valves: 24, electro-pneumatic with double pre-evacuation (VK-EP-2V) Ring Bowl Diameter: 960 mm Capping Heads: 6 × crown cork (KK) + 6 × screw cap (SV) Pitch: 125 mm Operating Hours: ...
Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details Leistung: bis zu 50.000 bph Bauart Rotierend Arbeitsrichtung gegen den Uhrzeigersinn (r-l) Modulare Maschine Höhe des Förderbandes: 1150 mm Etikettentyp: Kaltleim Position des Etiketts Brust/Hals Stanniol Körper Rücken Siegel Flaschenformate 0,25l Vichy-Flasche 0,5l GDB 0,7l GDB 0,75l Gastro-Flasche Anzahl der Aggregate: 3 Teilkreisdurchmesser: 1800 mm Anzahl der Flaschenteller: 45 ...
Weibert WJ-F30 Table milling machine 5.5 KW R + L barrel swiveling 3000 to 10000 U/1 Control Panel top Safety rulers WJ 600500
Grinding spindle to Hauser coordinate grinding machines. 2 electric spindles with mounting shaft 3mm and 1 compressed air grinding spindle for receiving shaft 3mm. All spindles are tested for function.
Milling machine, universal milling machine, tool milling machine, two-spindle milling machine, milling machine -Milling machine: Two-spindle milling machine for small parts -Dimensions: see photos -Drive: 0.37 kW each -Coolant device -Dimensions: 1000/850/H1360 mm -Weight: 352 kg
1 set of boring bars for main bearing boring mill, carriage via cone, sleeve. Dimensions: DxL 20x940 mm 27x1100 mm 31.5x1400 mm 39.7x1700 mm Sale preferably as a set Price on request
SECOND-HAND 4+1 SPINDLES MOULDER STETON MOD. FAST 5S - CE RULES Spindle configuration: bottom 3kw right 3kw left 3kw top 4kw universal 3kw - working width mm 230 - planing height mm 120 - volt. 380/50 - s/n 25 906/00 - year 1998
SPECIFICATIONS: Set of cutting tools for processing window frames
Set of multi-spindle heads from the Swiss brand Pibomulti. Incomplete, lack of clamps and nuts for tightening the bits.
Voumard, 20448 - C28-9D, Fortuna Internal grinding spindle, up to 28000rpm, outer diameter 90mm, length approx. 350mm Picture below left ! Other spindles on request !
rotary table diameter: 600 mm grinding height: 450 mm grinding head - power requirement: kW Control: Siemens Sinumerik 840 C total power requirement: 30 kW weight of the machine ca.: 14,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding spindle incl. grinding wheel, 2 holders, belt wheels, electric motor, wheel cover, balancing mandrel, and description. Fortuna, 14 UA 85, Outer Ø : Ø 85 mm Length : approx. 400mm Other grinding spindles on request. See photos !
Doka parts for Staxo shoring system, consisting of: approx. 30 pieces load spindle 70 List number of manufacturers: 582639000 SO000122 Auction-ID: A1-46973-402
Peri load spindles and accessories for PD8 load tower, consisting of: 53 pieces spindle PD 8 l=1160/800, stiff, corroded (Peri article number 018030) 53 pieces Swivel nut PD 8, galvanized, stiff, corroded (Peri item number 018270) 9 pieces base plate PD8 (Peri article number 018070) 2 headstock PD8 (Peri item number 018040) 4 pieces of bolts (Peri item number 018050) 4 Pieces Spring Plug (Peri Article Number 018060) Auction-ID: A1-46973-420
Peri load spindles and accessories for PD8 load tower, consisting of: 60 pieces spindle PD 8 l=1160/800, stiff, corroded (Peri article number 018030) 60 pieces Swivel nut PD 8, galvanized, stiff, corroded (Peri item number 018270) SO001025 Auction-ID: A1-46973-419
To give away two atonement units as shown. Loading facilities available. Approx. 200kg.
Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW? Fence / Near 11 kW ? Top 7,5 kW ? Bottom 5,5 kW Spindle speed 6000 rpm Variable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mm Driven table roller Mechanical/digital read-out Centralised lubrication CE sound/safety hood Interior light Hopperfeed EM 11, upt to 60 cycles/min Workpiece length: 350 to 3000 mm Workpiece width: 20 to 230 mm Workpiece thickness: 12 to 70 mm Air requirement: 8 bar, connection DN8 Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/s Tooling not included
Heimatec precision tool holder, made in Germany. Includes mounting screws and accessories as shown.
Multifix size C 14 pieces. Used See pictures Viewing desired By appointment
Notching machine - Footswitch - Emergency stop Sheet thickness 6 mm Pressure 18 t Blade length 220 mm Angle adjustable from - to 90 degrees Table surface 1100 x 950 mm Bending length 835 mm Machine weight approx. 1.1 t Dimensions L x W x H 1.2 x 0.8 x 1.4 m Auction-ID: A7-46642-22
Heimatec precision tool holder, made in Germany. Includes mounting screws and accessories as shown. Auction-ID: A7-46756-205
Multifix size C 14 pieces. Used See pictures Viewing desired By appointment Auction-ID: A7-46993-4
Multiple rip saw Paul K34G / 1200 With loading and stacking Wamhoff Plate size: max. 2.25 mx 1.10 m 6 cycles / min, Year of construction 1988, Mechanization - 1993 Main motor 48 kW Condition - excellent With: infeeding roller bed, outfeeding roller bed, suction and several saw blades.
Herding® Multicoater Unused New, 3 pieces available e.g. film coats of tablets During the spraying phase, a very fine dust is produced during the film coating of tablets, which is extracted from the fluidized layer into a filter device with a defined air flow. The dust is sticky and without the precoating material forming a protective layer on the filter, the surface would stick very quickly. The Multicoater is a pneumatically operated dosing device and is usually operated with inert gas. It consists of a template container including control and conveying technology and is filled via a loading opening in the housing cover. The dosage is done via an injector pressure pump with a flow rate of 1.3kg/min. The MultiCoater has an internal control system that automatically controls the flow of the fluidizing, conveying and rinsing sequence.
Cat. No. 12-1075 in very good condition New price: 2000€ Dimensions and weight: LxWxH: 70 x 48 x 103 cm Weight: 38 kg For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery
Year of construction 2009 like new condition, has worked only sporadically 1 year, Looks machine like new inside The machine is CNC controlled, for the mechanical structuring of thin-film solar cells. The processing heads move over that with a layer of molybdenum metal or other sputtered Glass, with a format 125 x 65 cm, and create an insulating track by material removal. The CNC control controls the movement of the X-, Y-, Z-, A-, and U-axis. all documents, Control Panel, and control are available Original price: 847.000,00 € The complete unit to build a 75MW of production are available. (1 x laser, 2 x mechanical structuring and setting device for needles) Geamt-new value 2.1 mill euro net
Cat. No. 12-1110 in a very good condition Capacity: 4000 litres/h Pressure: 10 bar Rotating speed: 1425 U/min Original Price: 3000€ Measurements and Weight: LxWxH: 82 x 38 x 105 cm Weight: 63 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Small compact Miltirip sawing machine KUSING RP - 200. Technical parameters: Power of the main motor : 7.5 / 11 kW Diameter of the shaft: 30 mm Length of shaft: 200 mm Power of the feed motor : 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 250 / 300 mm Maximum material height: 65 mm Minimum material length: 450 mm ( 250 mm on request ) Small compact Miltirip saw KUSING RP - 200. The machine is suitable for cutting material with low energy consumption. Suitable for cutting raw wood and semi-finished products. KuSING has been manufacturing woodworking machines since 1991. Machine in stock. The advertisement was automatically translated. Translation errors are possible.
multi spindle automatic lathe Schuette SF 13 built in 1991 - pick up with back side tooling -Thread cutting gear - chip conveyors - PLC control and much more.
1 of used film-only shrink wrapper, make ZVT (KHS), type SP030V, new 2000. Operating side: left. Capacity 30 cycles/minute nominal, 35 cpm in overspeed. Siemens S7 PLC. Indramat EcoDrive servo's. Used for PET bottles in clear and print-registered shrink-wrap film as: 500 ml, D 63.5 x H 230 mm, 3x2=6, dual-lane, 1.000 ml, D 80 x H 281 mm, 3x2=6, dual-lane, and 1.500 ml, D 89 x H 332 mm, 3x2=6, dual-lane. Future option (no parts supplied) was 2.000 ml, D 100 x H 349 mm, 3x2=6 and 2x2=4, dual-lane.
ORDER NO. 6524 TECHNICAL DATA - track width 360mm - shaft width 350mm - max disc diameter 350mm - disc bore diameter 80mm - max cutting height 120mm - table top size 2040x840mm in advance: - ratchets - pulling shaft, toothed - ratchets - smooth sliding shaft - shaft with saws - slip shaft, pressure shaft bottom: - 2 rolls in front of the table top - guide - ratchets - caterpillar - central lubrication of the track - electric shaft lifting with saws 0.55kW - electric body lifting 0,55kW - smooth regulation of the feed speed - diameter of the extraction connection 140,125mm - main motor 45kW - overall dimensions L/W/H 3530x2220x2200mm - weight about 4000kg ADVANTAGES – Czech production – 2 slip rollers in the countertop – used multisaw – very good condition Net price: 62900 PLN Net price: 13978 EUR depending on the price 4,50 EUR ...
Multi spindle automatic lathe Saeid 13-6 DNT SF Year of construction 1989 Adjustment of speed and cycle time by servo motor Facilities: -Pick-up device with rückw. Editing -Thread cutting gear -Waheed clear text display -pivoting control panels -PLC control etc.
Salva Modular deck oven type: UPV CL model: ST85 Ask for further information
CTX Toastmaster Pizza oven stainless two level pizza oven on mobile frame, stainless mesh belt, 450mm wide belt, variable speed, adjustable temp control
Drilling and threaded spindles, with FIBRO round board approx. 800 mm, See pictures
Double finisher 842 Multimatic with control year 08/2014, NP 20110 € Wardrobe former and trouser topper rotatable on one column Finishing process in closed cabin Integrated cabin extraction automatically controlled Doors close automatically Flexible processing of different wardrobes and sizes Computer control with nine freely programmable memory slots Air volume regulation for particularly sensitive wardrobe space-saving and almost no loads in the working area due to finishing process extraneous steam heated or fully electric with built-in electric steam generator Are you looking for an all-rounder for jackets & Co? - Multimatic Double Finisher 842 With the Multimatic double finisher 842, jackets, jackets, coats, trousers and the like can be finished automatically. It consists of a shape finisher and a trouser topper. The two devices are rotatable attached to a column. ...
Double finisher 842 Multimatic with control year 09.2006, Np 20110 € Wardrobe former and trouser topper rotatable on one column Finishing process in closed cabin Integrated cabin extraction automatically controlled Doors close automatically Flexible processing of different wardrobes and sizes Computer control with nine freely programmable memory slots Air volume regulation for particularly sensitive wardrobe space-saving and almost no loads in the working area due to finishing process extraneous steam heated or fully electric with built-in electric steam generator Are you looking for an all-rounder for jackets & Co? - Multimatic Double Finisher 842 With the Multimatic double finisher 842, jackets, jackets, coats, trousers and the like can be finished automatically. It consists of a shape finisher and a trouser topper. The two devices are rotatable attached to a column. ...
Esterer DKV 1 movable shaft ! feed hydraulically hydraulic and electrically roller lift: hydraulic power: 55 kW Year construction year: approx. 1982 passage: 750mm = width, 160mm = height 2 x directional laser incl. approx. 15 Circularsaws including with Splitter unit screw roll; good
Rip-off saw for cutting waste material (SLABS). Suitable for processing waste after an angle circular saw. Combined woodworking machine for processing waste material. It offers a two-in-one solution. In one pass, the machine cuts a board from a semicircle (slab), which cuts the spreading unit to the desired, quickly adjustable size. The machine can be used for cutting/deburring prismatic materials, but also for waste processing with one machine. The configuration of the machine and its parameters is carried out by arrangement. Technical parameters of the horizontal unit: Main engine power: 2 x 11 kW Feed motor power: 1.1 kW Minimum height of the starting material: 15 mm Minimum material length: 2000 mm Maximum material length: unlimited Maximum height of the starting material: 100 mm Technical parameters of the vertical unit: Main engine power: 2 x 7.5 kW Minimu ...
Threaded drilling machine with up to 10 spindles, adjustable drilling pattern
maximum number of results exceeded
please refine your search
390 € 
