multi spindles used for sale

A used electric deck oven Wachtel Piccolo I-4 with 4 shelves each 80x60cm is functionally tested for sale and immediately available. The oven is equipped with exhaust hood and proofer. Shipping costs on request. Deck Oven Quail Piccolo I-4 DMS 3 Master EM Timer K - 4 shelves each 80x60cm - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with separate steam box for the generation of steam - with automatic night start function - with exhaust hood - Stove with water connection for steam - Height is adjustable - 19.3 kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction 10 / 2010

Deck Oven Electric Oven Year 10/2016 Wiesheu Type: EBO 5-86 S&L Bottom heat and top heat can be controlled individually 5 baking levels each 1 x 600 x 800 mm Oven mobile with brake Upper exhaust hood with steam condenser Stove height top double 135 mm, middle 160 mm, bottom double 135 mm H Bottom proofer for 8 trays 600 x 400 mm Modular construction system Connection 400V, 27.4 kW, 3 x 16A-CEE plugs Water connection 3/4 inch, water drain for DN 40 Dimensions: 1130 x 1060/1300 x 2120 mm, WxDxH Used oven cleaned 3 months warranty Option: Water Pull-off apparrat Loader manual Maintenance contract Delivery & Connection Instruction & Commissioning Visit our large exhibition!

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Spindle bore87 mmDiametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWMain drive 1Drive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range25 - 5000 rpmAccuracy at point stopping0,01 degreeFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive s ...

A used deck oven Miwe Condo CO 4.0806-2D black from 2013 is currently for sale and immediately available in stock. Miwe Condo CO 4.0806 2D Stone Slabs Oven in Nostalgia Black - Deck oven with 4 shelves and proofer - Manufacturer: Miwe - Model: Condo CO 4.0806 2D - with 4 shelves each 80x60cm - Max. temperature: 320°C - With Miwe FP8 control - Floor entrance height: 13cm - with proofer - With exhaust hood and steam condenser - Year of construction 2013 - 18.9 kW - 400 Volt 50Hz - External dimensions approx.: 110 x 115 x 210cm W x D x H More information and pictures, as well as shipping costs and trade-in on request.

SINGLE MULTIHEAD WEIGHER FEEDING - 2XBAGGERS MACHINES ONLY WITH TWIN OUTFEED CONVEYORS - NO GANTRY ISHIDA MULTIHEAD WEIGHER MODEL: CCW-RS-216B-2D-30-SS YEAR: 2011 16 HEAD ILAPAK TWIN BAGGERS YEAR: 2011 MODEL: VEGATRONIC 500 300MM JAW

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose220h5 mmSpindle diametre on front bearing160 mmSpindle bore102 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)580 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the a ...

Deck Oven Electric Oven Wiesheu Type: EBO 3-64 M Bottom heat and top heat can be controlled individually 3 baking levels each 1 x 600 x 400 mm Oven mobile with brake Extractor hood with capacitor top Proofer at the bottom Modular construction system Connection 400V, 3.x 6.1 kW, 3 x 16A-CEE plug Water connection 3/4 inch, water drain for DN 40 Dimensions: 930 x 1350 x 1900 mm, WxDxH Used oven cleaned 3 months warranty Option: Water Maintenance contract Instruction & Commissioning More ovens in stock!

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmWeight approx.3000 KgDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmBar diametre80 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (40% DC)25,5 kWDrive power (100% DC)17 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmSlide 1Longitudinal stroke830 mmTransverse stroke271 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,26 x 2,44 x 1,95 (4,5 x 2,44 x 1,95) mWeight approx.6300 KgDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange  ...

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways620 mmTransverse stroke260 mmLongitudinal stroke795 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,03 x 2,2 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...

Deck Oven Quail Piccolo PRO II-6 - Stone slab oven built in 2013 - Manufacturer: Wachtel -Type: Piccolo PRO II-6 - 6 floors - 120cm wide and 80cm deep on each floor - With fixed water connection - each floor is equipped with separate swash box - Each floor with separate control - Top and bottom heat can be controlled separately - Oven can be moved on castors - Master control - electr. Connected load 50.4 kW - Year of construction 2013

included 4 deck oven

Used deck oven 12m² HEIN, type: Electro E5050 -in bakery condition- - 5 floors - Digital control -electric - Condition: Very good Visits and test runs are possible by arrangement.

Multi spindle drilling machine Brand: VITAP Type: ALFA DIGIT New machines - QUICK CHANGE SPINDLES - Side reference fences with digital electronic readouts and with manual exclusion for the execution of the system 32 mm drilling holes - Pneumatic cylinder for horizontal/vertical positioning of the boring group - Front caliper with digital electronic readouts - Nr. 2 alu fences with 2 stops each (1500 mm. each) - Quick change fitting of the alu fences with stops - 2 safety clamps inclined 4 degrees - 6 positions turret to adjust the drilling depth (0-80mm) - Height regulation of the boring group by mechanical digital position indicator - Automatic vertical-horizontal depth difference device (10 mm) - Drilling speed adjustment from the panel control - Strengthened steel structure for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropne ...

Deck Oven Electric Oven Miwe Condo Model: Type: CO.5.1208 AS control Bottom heat and top heat can be controlled individually 5 baking shelves 1200 x 800 bottom 3 stoves with steam Chassis mobile with brake Connection 400V, 5 x 9 kW, 5 x 16A-CEE plug Water connection 3/4 inch, water drain DN 40 Dimensions: 1500 x 1300 x 1950 mm, WxDxH Used oven

Model: Quail mini Piccolo 3 Electric deck furnace with steam for 3 trays 600x400mm Stove dimensions 600x400mm / 1 x 210, 2 x 135 mm high DMS 3 control with night start Extractor hood with fan Clipboard for 3 trays 600x400 Bottom shelf for 6 trays 600x400 Connection 400V, 18.6 kW, 3 x 16A-CEE plug Dimensions: 970 x 950 x x 2130 mm, WxDxH 3/4 inch water connection Oven mobile with fixed wheels Used furnace cleaned and tested 6 months warranty + spare parts service Option: Water Reducer Maintenance contract Instruction & Commissioning We have many more ovens in stock!

6 spindles Tapping Cross drilling Thread Rollers Milling apparatus a lot of accessories Feed motor (spindles) defective! with bar feeder IEMCA PRA 40/32 P

General features  Type: Electric convection oven with two overlapping cooking chambers  Capacity: o Lower oven: 10 trays of 60x40 cm o Upper oven: 6 trays (or 5 in some versions) of 60x40 cm  External dimensions (L x W x H): 900 x 900 x 2102 mm  Total weight (without trays): Approx. 510 kg Power & Power  Power supply: 400/230V 3/N/PE 50 Hz  Installed power: o Lower oven (10 trays):  15.8 kW (with spray technology)  19.8 kW (with steam device) o Upper oven (6 trays):  9.3 kW  Electrical protection: o 3 x 16 A (for the 6-tray upper oven) o 3 x 32 A (for the lower oven of 10 trays) Control system  MIWE FP digital control  Control panel with physical keys and display (not touchscreen)  Advanced programming: o Preset recipes o Ability to create and customize new recipes  Precise temperature and ventilation regulation Cooking f ...

Manufacturer: Paul, Type: Sägewelle K 1500, Diameter saw spindle mm: 100, Cutting width max mm: 1500,

Manufacturer: SCM, Type: M 3, Year: 2001, Cutting widht mm: 300, Working hight mm: 120, Power engine kW: 44, Year :1993

Manufacturer: Raimann, Type: KR 230, Year: 1993, Controlled feeding lineal: no, Cutting widht mm: 230, Working hight mm: 80, Diameter saw blade min-max mm: 350, revlutions saw spindle rpm: 6000, Diameter saw spindle mm: 65, Power engine kW: 30, Wight approx. kg: 2500, Year :1993

Manufacturer: Costa, Type: Lince, Year: 1999, Cutting widht mm: 300, Power engine kW: 58, Year :1999

Manufacturer: Paul Mehrblattsäge K34G 800 , Type: K 34, Year: 2000, Arbeitsbreite min-max.mm: 800, Arbeitshöhe min-max.mm: 40, Saw Blade Diameter mm: 300, Working hight mm: ca.40, revlutions saw spindle rpm: 6000, Movable saws: no, Power engine kW: 30, Power feeding kW: ca.4, Feeding speed max m/min: 10-25, Splinter protection: yes, Feeding by vacuum lifter: mit Abschieber, Abstapeln mit : Rollenbahn, FREE TEXT: inkl.Ersatzsägewellen ca.8 Stück, Year :2000

Manufacturer: Paul, Type: K34 O/800 GL, Year: 2016, Alignment laser: 25 mW, Arbeitsbreite min-max.mm: 450, Arbeitshöhe min-max.mm: 26 - 52, Min.-max. working length in mm: 480 - 1.600, Saw Blade Diameter mm: 240, Working hight mm: 1.350, Cutting widht mm: 800, revlutions saw spindle rpm: 4.500, Diameter saw spindle mm: 60, Power engine kW: 75, Feeding speed max m/min: stufenlos, Inlet transport mm: 715, Year :2016

Manufacturer: Paul, Type: Sägewelle, Cutting widht mm: 1500, Diameter saw spindle mm: 100,

Manufacturer: Paul, Type: K 34 M, Year: 1998, Arbeitsbreite min-max.mm: 1300, Arbeitshöhe min-max.mm: 40, Min.-max. working length in mm: 80, Saw Blade Diameter mm: 300, Tool adaption system: 30 Sägewelle, revlutions saw spindle rpm: 4500, Max. throughput width mm: 1500, Chipper: möglich, Power per saw kW: 4 X 4, Power feeding kW: 5,5, Feeding speed max m/min: 5-25, Positioning above axes: yes, Splinter protection: yes, Feeding system: Walzen, Year :1998

6 spindles Tapping Slotting tool Peeling tool holder Pick-up device lots of accessories with bar feeder IEMCA PRA 40/31 P (3m - poles)

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmClamping chuck diameter max.315 mmLongitudinal stroke1345 mmTransverse stroke260 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightWeight approx.7800 KgDimensions (L x W x H)5,4 x 2,07 x 2,6 mPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs, 2 amperes 4 outputs, potential-freeExcentric turning and milling operationExcentric turning and milling operation (only with Sie ...

Tom Chandley BOMK4MTU3 Oven and proofer Serial: 10837 Stainless, 15.5Kw, Three deck oven with proofer, adjustable temp and timer controls, chamber size 900mm x 700mm x 180mm, stone based, mobile, 3Ph

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmC-Axis Speed100 rpmMax. torque (40% DC)192 NmTorque of C-Axis (holding torque)168 NmWork spindleSpindle diametre on front bearing120 mmSpindle noseA2-6 Spindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axis universal turning machine with - partiall hollow clamping device (hydr.) inner draw tube Ø 52 mm - C-axis and spindle brake (hydr.) - 12 stations circle revolver Sauter reception acc. VDI 30, DIN 69880-30 with tool drive Connection/drive acc. DIN 5480 Direct measuring system, glas scale in X-axis - tailstock; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTransverse stroke190 mmLongitudinal stroke525 mmClamping chuck diameter max.210 mmWork spindle (left)Spindle noseFlat flange Spindle bore73 mmDiametre of spindle nose140h5 mmSpindle diametre on front bearing100 mmMain drive 1Drive power (100% DC)13 kWSpeed range20 - 6000 rpmTorque (100% DC)171 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)192 NmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-500 ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Speed max.6000 rpmNumber of driven tools12 Power max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (40% DC)14 kWDrive power (100% DC)12,6 kWSpeed range-5500 rpmTorque (100% DC)171 NmC-Axis Speed100 rpmMax. torque (40% DC)192 NmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmGeneral2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Main drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Main drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWorking areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axis universal turning machine with - partiall hollow clamping device (hydr.) inner draw tube Ø 52 mm - C-axis and spindle brake (hydr.) - 12 stations circle revolver Sauter reception acc. VDI 30, DIN 69880-30 with tool drive Connection/drive acc. DIN 5480 Direct measuring system, glas scale in X-axis - tailstock; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTransverse stroke210 mmLongitudinal stroke525 mmClamping chuck diameter max.210 mmMain drive 1Drive power (100% DC)13 kWSpeed range20 - 6000 rpmTorque (100% DC)171 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)192 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore73 mmSpindle diametre on front bearing100 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-500 ...

Zucchelli Forni Modular 2C2T Modular oven Serial: 2020E0860 2020, Stainless, two deck modular oven, chamber size 800mm x 600mm x 160mm, with adjustable temp and time controls, stone based, electric, 11.3Kw, mounted on mobile rack storage, 3Ph

SPECIFICATIONS: Conveyor belt width: 300 mm Shaft: Ø 70 mm Saw blade: Ø 300 mm Working height: max. 110 mm Electronic height adjustment Adjustable feed speed (1.5 kW) Installed power: 46 hp

REF-2497 DISMACK MULTIHEAD WEIGHER WITH 10 HEADS Multihead weigher with 10 weighing heads. It distributes the product among several weighers and performs weigh combinations until it reaches the closest to the desired target. Manufacturer: DISMACK. Specially designed for weighing solid or semi-solid granular products. It can also be used for weighing products wrapped in unit packages (sweets, muffins, etc.), as well as unit products (potatoes, cherry tomatoes, etc.). Voltage: AC 220 V, 50/60 Hz, 9 A. Power: 1.5 kW. Weighing capacity: 10 – 65,000 g. Volume: 1,300 ml. Speed: 70 discharges/min. Total combinations: 1,000. Overall dimensions: width 1,000 mm; length 1,100 mm; height 1,600 mm. Approx. weight: 300 kg.

45 cycles per minute with chamfering 60 cycles per minute without chamfering Maximum cutting length 700 mm, width 400 mm

Deck oven Miwe Condo CO 3.1208 Year: 2015 - Manufacturer: Miwe - Model: Condo CO 3.1208 - 3 shelves each 120x80cm - each shelf for 2 trays 60x80cm long next to each other or 4 trays 60x40cm - Each floor with separate control panel display - Top and bottom heat can be adjusted separately - Each floor with separate steam box - With restart function - With ECO function - with proofer - With exhaust hood - Can be moved on castors - Year of construction 2015 - 2 swath apparatus swath boxes NEW

Deck Oven Quail Piccolo II-4 Proofer Deck Oven Quail Piccolo II-4 - DMS3 Master EM Timer - 4 floors - 120cm wide and 80cm deep on each floor - 2 trays 60x80cm fit next to each other on each floor or 4 trays 60x40cm - With fixed water connection - each floor is equipped with separate swash box - Each floor with separate control - Top and bottom heat can be controlled separately - Oven can be moved on castors - Master control - electr. Connected load 35.3 kW - Year of construction 03 / 2009

Key data: 4 , 14 mm

Multiple drill head from Romai, Sigloch & Schrieder up to diameter 14 mm in steel 4 stations, automatic and manual switching 2 speed ratios choiceable (direct and reduced) incl. adapter MK 4 and flange

Multi-bucket excavator

Oscillating Drilling Machine COMEC MM0 10 3L Number of horizontal spindles per page 4 Drilling distance between centers during chiselling: min/max: 45/760mm Drilling distance between centers during straight drilling: min/max 45/850mm Hole length 0-100mmm Spindle speed 4500/9000 rpm 3 independently adjustable oscillations Oscillation motor 1.5kw Total power 7kw Pneumatic material clamps Maximum workpiece dimensions 1000x 100x 100mm Capacity 600pcs/h (300+300) CE Certified Year of production 2005 Machine dimensions: 1450x1650x1350cmH Weight about 1000kg

Vertical Multistage High Pressure Centrifugal Pump KSBTyp Movichrom N CN 3/10 2RFabr. Nr 1-P30-837561Nominal flow rate max. 3 m3/hNominal delivery head 70 meters = 7 barNominal speed 2900 rpm. Motor power 1.5 kWNet connection 400 volts, 50 Hz- pump structure in 10 stages- pump elements made of stainless steel, pump base made of cast iron connection flanges DN 32- suitable for drinking water supply, irrigation and drainageSpace requirement pump L x W x H 250 x 220 x 830 mmWeight 38 kgUnused replacement pump made of

A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package  ...