multi spindles used for sale

ORDER NO. 7212 TECHNICAL DATA - track width 250mm - shaft width 400mm - shaft diameter 80mm - max disc diameter 400mm - disc bore diameter 80mm - max cutting height 140mm - table top width with clearance 730mm - tabletop length 2130mm in advance: -Triggers - pressure shaft, sliding roller -Triggers - pressure roller, smooth - shaft with saws - smooth pressure shaft 4 pcs From below: - Slip shaft, smooth -Triggers -caterpillar Feeding table + guide rail - roll width 460mm - feeder dimensions length/width 1660x630mm - total dimensions length/width/height 2010x630x900mm Take-up table - pulling rollers 8 pcs - roll width 800mm - total dimensions length/width/height 4400x980x880mm - Central lubrication - electric lifting of the body up/down 0.55kW - electric shaft adjustment with 0.55kW saws - smooth adjustment of the feed speed 1-39m/min - feed motor 1.1k ...

Type: MZ73031A Number of spindles 3 Distance between first and last spindle 50 mm Adjustable drilling speed Height of the working table 820 mm Table dimensions 735×440 mm Number of clamps 2 Motor power 1,5 kW 400 V Motor r.p.m. 2800 r.p.m Working air pressure 6-8 bar Weight 75 kg Transporting dimensions 900x700x1500 mm

Type MJ1412-40 Feed speed (inverter) 9-35 m/min. Spindle diameter 70 mm Diameter of sawblades 355-405 mm Cutting width 400 mm Cutting height 100/115 mm Min. cutting length 290/480 mm Motor power 37 kW Total power 42,1 kW Transport dimensions 3000x1300x1500 mm Weight 2000 kg Delivery term: ~ 3 months.

Nova BioProfile Flex Automated Cell Culture Analyzer BioProfile is an automated cell culture analyzer that measures up to 15 important cell culture attributes. By combining up to five separate instruments into one easy-to-use instrument, BioProfile FLEX simplifies workflow and saves time, labor, and operating costs compared to multiple instruments. The FLEX automatic sampler takes samples from its two fermenters and transmits them to the measuring unit of the FLEX analyzer. The data obtained from the FLEX autosampler were compared with data taken manually from the reactor and their statistical analysis was performed. Specifications Sample analysis time: 2.5 minutes (gases only – PO 2 + PCO 2 ), 4.0 minutes (Chemistry/Gas and Osmolality), 6.25 minutes (all 15 tests), Operating temperature range: 15-30 °C (59-86 °F), Relative operating temperature Humidity range: 20-85 ...

with hood including fan with Gaer schrank 4 herds each 60x80cm long ago any stove with stone slab manual control with fixed water connection for each floor separately Each floor with separate swath box Fermentation chamber control manually Each floor with viewing glass Each floor with lighting Connection per stove 4.65 kW 400 Volt 3/N/PE 50 Hz Furnace is mobile on wheels checked and cleaned The furnace is fully assembled ready for loading in stock.

Weishaupt Dual Fuel Burner -mu Type WM-GL20/4-A with digital combustion manager WFM Version ZM-R-3LN (SuperLowNox) Power range (N-gas) 300 - 2450 kW Power range (EL) 350 - 2450 kW Fully automatic on the oil side and gas side in a sliding step or modulating depending on the type of power control. Control range on the gas side up to 1:8 possible. Control range on the oil side up to 1:5 possible. for the combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling Frequency converter (included) Combustion air control with drive Fuel system best. made of high-pressure gear pump with Pressure regulating valve, electrosolenoid valves as Quick-closing device nozzle stock and nozzle Magnetic coupling for shutting off the oil ...

Used quail Piccolo, 5 floors with fermentation chamber. All floors with separate controls. Fermentation cabinet has 4 editions. 5 floors for 60x80 cm sheets all floors with separate controls Stainless steel clad with hood Fermentation chamber 4 editions for 60x80 cm sheets Dimensions: Height: 240 cm Width: 100 cm Depth: 140 cm Technical data: Year. 03/99 400V - 50 Hz AC/3PH/N/PE

320 pieces Multishuttle Dematic DMS2 STATIC Used goods built in 2019, very good condition, see pictures Load capacity: 31.5kg Load types: plastic containers, cartons, trays, containers How it works: Dematic Multishuttle 2 Overview - YouTube Negotiation price: € 2.900,- net ex stock Negotiation price: 1 piece € 5.900,- net/piece from 5 pieces € 4.900,- net/piece from 10 pieces € 3.900,- net/piece from 50 pieces € 2.900,- net/piece Very few hours of operation! Steel construction, rails, etc. available. Dismantling will take place from April to June 2024. Location: Northern Italy. Viewing possible by appointment. Further information on request. Partial sale possible. Systems are professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Assembly and programming can be carried out by partner companies. EVE ...

We offer Doka Multi-Purpose Bar Top 50 with 80% discount New value = €14,035.50 Package price: 2800,00€ net. Out-of-the-box Pcs. Designation 7 multi-purpose bars WS10 Top50 0,50m 18 Multi-purpose bars WU12 Top50 2,50m 1 multi-purpose bar WS12 Top50 2,75m 1 multi-purpose bar WU12 Top50 3,00m 8 multi-purpose bars WU12 Top50 3,50m If you have any questions, please contact Mr. Becker on 0049 176 70044689 Offer only valid while stocks last! Subject to prior sale! Loading: free of charge from our warehouse Transportation: Can be arranged on request. The transport price depends on the required loading meters, weight and distance and is calculated individually. Payment: cash payment on pick-up, transfer before pick-up. All prices excl. VAT + transport. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration a ...

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1980 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Gv29e0 Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without ro ...

Schuette multi-spindle rotary machine SF 26-6 1980 built -with thread cutting device - prepared for centrage suction system - standard Schuetz control D8gdo29 - mechanical gearbox - Balluff cam switch - standard rod guide

Thread cutting gear Pick-up device partially revised

Part Number 7407 SPECIFICATIONS - max cutting height 120mm - max element width 700mm - working width of the shaft with saws 620mm - max saw blade diameter 450mm - blade bore diameter 90mm in advance: -Triggers - 2 pulling shafts, toothed From below: -Triggers - 2 pulling shafts, smooth - shaft with saws - Pulling shaft, smooth - 2 types of feed speeds - feed motor 4.4kW - 30kW motor - machine dimensions length/width/height 2370x1400x1800mm - weight about 3000kg – Polish production – used machine, very good condition Net price: 45 900 PLN Net price: 10 432 EUR depending on the price 4,40 EUR (Prices are subject to change with higher fluctuations)

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Cmvlgfoyc - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide

Part Number 7405 SPECIFICATIONS - max cutting height 150mm - max element width 700mm - working width of the shaft with saws 530mm - max saw blade diameter 450mm (350mm installed) 350mm - blade bore diameter 90mm in advance: -Triggers - 2 pulling shafts, toothed From below: - 2 pulling shafts, smooth - shaft with saws - Pulling shaft, smooth - 4 types of feed speeds - feed motor about 2kW - 30kW motor - machine dimensions length/width/height 2400x1700x1900mm - weight about 3000kg – Polish production – used machine, very good condition Net price: 45 900 PLN Net price: 10 432 EUR depending on the price 4,40 EUR (Prices are subject to change with higher fluctuations)

Schuette multi-spindle rotary machine SF 50/51-6 Rod turning machine run on schneidoel standart Schuetz control mechanical gearbox Hydraulics integrated into the machine with snail-spaenefoerer

Schuette multi-spindle rotary machine SF 26-6 1984 built - mechanical gearbox - independent feed from the Laengsschlitten Position 4 - Thread cutting gear with thread cutting spindle

Gildemeister 6 Spindle Lathe AS 32-6 - Spindle stop set-up - Pneum pick-up device. - Zubehoer at an extra cost - Cross hole drilling - Thread cutting gears - Thread cutting device - wahlw. Fraeseinrichtung Querschl. - Spaenefoerderer

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1984 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without rod guide a ...

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Sowiabeb - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide

Part Number: 7318 SPECIFICATIONS - max cutting height 140mm - max element width 700mm - working width of the shaft with saws 650mm - max saw blade diameter 400mm - blade bore diameter 70mm in advance: -Triggers - 2 pulling shafts, toothed From below: -Triggers - 2 pulling shafts, smooth - shaft with saws - Pulling shaft, grooved - Infinitely variable feed speed on the inverter - feed motor 4.4kW - 30kW motor - machine dimensions length/width/height 2500x1400x1900mm - weight about 2500kg – Polish production – used machine, very good condition Net Price: 40900 PLN Net price: 9500 EUR calculated according to the price of 4,30 euros (With higher fluctuations the price may change)

Schuette SG 18-6 with gantry loader as feed lathe alternatively conversion possible as a rod lathe, incl. spindle stop setup Location 3+4 with extended stroke CNC cross slide on layer 5 Etc. Machine is ready for use and can be visited under electricity loading device is not currently connected.

Numer katalogowy 7309 DANE TECHNICZNE - max wysokość cięcia 170mm - max szerokość cięcia 510mm - max średnica piły 450mm - otwór tarczy 70mm - średnica wału 70mm z góry: - zapadki - 2 wały gładkie, poślizgowe z dołu: - 5 rolek wprowadzających, gładkich, poślizgowych - zapadki - wał ciągnący zębaty - wał z piłami - wał ciągnący zębaty - 5 rolek wyprowadzających, gładkich, poślizgowych - płynna regulacja prędkości posuwu - silnik posuwu około 3kW - silnik główny 22kW - średnica króćca odciągu 150mm - wymiary całkowite dł/szer/wys 4300x1600x1520mm - waga 1310kg – produkcji polskiej – dokumentacja DTR – wielopiła używana, stan bardzo dobry Net Price: 29900 PLN Net price: 6950 EUR calculated according to the price of 4,30 euros (With higher fluctuations the price may change)

Schuette multi-spindle rotary machine SF 26-6 1987 built 6-spindle rod turning machine with hydraulic catch slide prepared for Co2 Loesch plant run with cutting oel Schuetz control mechanical gearbox separate hydraulic unit -- Pick-up device with hydraulic voltage and back-weighing machining without Spaenefoerderer standard pole guide unabhaenger Laengsschlitten feed to position 1,2,4,5 ...

Deck Oven Wachtel Piccolo II-3 with Proofer -DMS 3 Master EM - 3 floors - 120cm wide and 80cm deep on each floor - With fixed water connection - each floor is equipped with a separate steam box - Each floor with separate controls - Top and bottom heat can be controlled separately - with proofer - Oven can be moved on castors - Control DMS 3 Master Timer - electr. Connected load 26.9 kW - Each floor with separate 16A CEE plug - 1 floor entrance height is 20cm - 2 floors floor entrance height is 16.5cm - Year of construction 05 / 2013 - External dimensions approx. wide: 156cm Depth: 134cm and 202cm high (height can be adjusted on the roller holder)

Gildemeister Multispindle Slot machine 6- Spindler Type: AS 25-6 Pick-up device back-valued processing pneumatic stop Balluff cam switch IEMCA PRA Bar loader Oil mist separator (electrostat.) Conveyor Machine has been retrofitted in the past

20-90-542 Multeosill Drilling Machine WOODLAND MACHINERY (new) Type: BM21S Number of shafts 21 Adjustable drilling angle Working width 700 mm Table Dimensions 1000 × 900 mm Additional support Ruler 3000 mm Number of Pressers 2 Engine power 1.5 kW 380 V 50 Hz Required Air Pressure 8 bar Drilling Step 32 mm Weight 150 kg Transport Dimensions 1200x1000x1300 mm

PART NUMBER: 7481 Specifications: - Track width 350mm - shaft width 350mm - max blade diameter 400mm - blade bore diameter 80mm - max cutting height 120mm - table top dimensions 2050x1230mm in advance: -Triggers - pulling shaft, toothed -Triggers - shaft with saws - slip shaft, pressure shaft From below: - rollers in front of the tabletop, 2 pcs -Guide -Triggers -caterpillar - central lubrication of the track -laser - electric shaft lifting with saws - Electric body lifting - Infinitely variable feed speed - extraction spigot diameter 140mm - main motor 45kW - total dimensions length/width/height 2600x2350x1850mm - weight about 4000kg Advantages: – Czech production - with laser – used multi-rip saw – very good condition Net price: 36900 PLN Net price: 8386 EUR depending on the price of 4.40 EUR (Prices may change with higher flu ...

Floor oven Friedrich E3 6/8 -3 floors each 60x80cm -Upper and lower heat can be controlled separately -digital control -with fermentation chamber -with exhaust hood -can be used on wheels -Floor height 13.5cm -with fermentation chamber

CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...

PART NUMBER: 7480 Specifications: - Track width 360mm - shaft width 350mm - max disc diameter 350mm - blade bore diameter 80mm - max cutting height 120mm - table top dimensions 2040x1220mm in advance: -Triggers - pulling shaft, toothed -Triggers - shaft with saws - slip shaft, pressure shaft From below: - rollers in front of the tabletop, 2 pcs -Guide -Triggers -caterpillar - central lubrication of the track - electric shaft lifting with saws - Electric body lifting - Infinitely variable feed speed - extraction spigot diameter 140mm, 160mm - main motor 30kW - total dimensions length/width/height 2600x2300x1850mm - weight about 4000kg ADVANTAGES – Czech production – used multi-rip saw – very good condition Net price: 37900 PLN Net price: 8614 EUR depending on the price of 4.40 EUR (Prices may change with higher fluctuations)

Type MJ900-X3 Spindle diameter 74 mm Diameter of sawblades 205 mm Cutting width 900 mm Cutting thickness 5-25 mm Speed 2600 rpm Motor power 15 kW Feed speed 0-12 m/min. Feeding motor 1,5 kW Transport dimensions 2100x1400x1350 mm Weight 1700 kg Delivery term: ~ 3 months.

various accessories / spare parts for Tornos AS 14

PART NUMBER: 7548 Specifications: - Track width 250mm - shaft width 250mm - max disc diameter 350mm - blade bore diameter 80mm - max cutting height 120mm - table top width with clearance 700mm - table top length 1790mm -in advance: -Triggers - pressure roller, smooth -Triggers - pressure roller, smooth - shaft with saws - smooth pressure shafts 2 pcs - from below: -Guide - slip shaft, smooth -Triggers -caterpillar - central lubrication - feed motor 1.1kW - main motor 30kW - Electric body lifting - manual lifting of the shaft with saws - extraction spigot diameter 160mm - total dimensions length/width/height 2250x1700x2000mm - weight about 3000kg ADVANTAGES – made in Germany – electric lifting of the body and shaft – smooth feed speed control – used multirip saw, very good condition Net price: 76900 PLN Net price: 17884 EUR dep ...

Miwe Condo CO 4.0608 2D floor oven with fermentation oven BJ: 2009 Type: CO 4. 0608 2D with fermentation cabinet 4 floors for 60x80 cm sheets each 2 double-chamber floors with one controller each each floor with stone baking plates digital control Miwe FP control mobile on steering wheels Fermentation cabinet: digital control 16 editions or 8 editions for 60x40 cm sheets or for 60x80 cm sheets Dimensions: Height: 210 cm Width: 90 cm Depth: 120 cm Technical data: BJ: 2009 400/230 V 50hz 19.6 kW

PART NUMBER: 7547 Specifications: - Track width 300mm - working width of the shaft 290mm - max disc diameter 300mm - blade bore diameter 70mm - max cutting height 100mm - width of the table top with extension 680mm - table top length 1630mm -in advance: - 2 rows of ratchets - Slip roller, metal, pressure roller - shaft with saws - 2 smooth metal sliding rollers, pressure roller - from below: - guide strip -Triggers -caterpillar - electric body adjustment up/down - central lubrication of the track - 2 types of feed speeds - feed motor 1.1kW - main motor 22kW - extraction spigot diameter 130mm - total dimensions length/width/height 2000x1400x1700mm - weight about 900kg ADVANTAGES – Italian production – very good condition – used multi-rip saw Net price: 34900 PLN Net price: 8116 EUR depending on the price 4.30 EUR (Prices may change w ...

PART NUMBER: 7545 Specifications: - Track width 250mm - shaft width 220mm - max disc diameter 300mm - blade hole diameter 60mm - cutting height 100mm - table top width 650mm - table top length 1460mm –in advance: - 2 rows of ratchets - smooth sliding shaft - shaft with saws - smooth, sliding shaft – from below: -Guide -Triggers -caterpillar - 2 types of feed speed + smooth - central lubrication - feed motor 1.2kW - main motor 21kW - extraction spigot diameter 180mm - total dimensions length/width/height 1700x1450x1500mm - weight about 1800kg ADVANTAGES – Italian production – DTR documentation – a solid machine – used multirip saw, very good condition Net price: 25900 PLN Net price: 6023 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

2 heads, manually adjustable approx. 50 - 320 mm, foot switch, approx. 300 mm working depth

PART NUMBER: 7544 Specifications: - Track width 250mm - working width of the shaft 220mm - max disc diameter 300mm - blade hole diameter 60mm - max cutting height 100mm - width of the table top with extension 560mm - table top length 1580mm –in advance: - ratchets 2 rows - Slip roller, metal, pressure roller - shaft with saws - smooth, metal, slip roller – from below: - slip roller - guide strip -Triggers -caterpillar - central lubrication of the track - smooth speed control on the inverter - feed motor 1.5kW - main engine 15kW - extraction spigot diameter 170mm - total dimensions length/width/height 1950x1500x1600mm - weight about 1800kg ADVANTAGES – Italian production – central lubrication of the track – very good condition – used multi-rip saw Net price: 33900 PLN Net price: 7884 EUR depending on the price of 4.30 EUR (Pric ...

Miwe Condo CO 4.0608 2D floor shop oven My. 2011 4 floors for 60x80 cm sheets each 2 double-chamber floors with one controller each each floor with stone baking plates Entrance floor height 13 cm digital control Miwe FP control mobile on steering wheels Fermentation cabinet: digital control 16 editions or 8 editions for 60x40 cm sheets or for 60x80 cm sheets Dimensions: Height: 210 cm Width: 90 cm Depth: 120 cm Technical data: BJ: 2011 400/230 V / 50Hz / 19.1 kW Electric From this Miwe Condo oven we have many constantly available in our warehouse immediately. Built from 2009 to 2012.

In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg

2 heads, manually adjustable approx. 50 - 320 mm, foot switch, approx. 300 mm working depth

PART NUMBER: 7532 Specifications: - Track width 340mm - shaft width 400mm - shaft diameter 65mm - max blade diameter 400mm - blade bore diameter 80mm - max cutting height (with 400mm blade) 140mm - table top width with clearance 870mm - table top length 2140mm -in advance: -Triggers - 1 roller, pressure slip -Triggers - slip roller, pressure roller - shaft with saws - slip roller, pressure roller - slip shaft, pressure shaft - from below: - guide strip - slip roller -Triggers -caterpillar - electric body lifting 0.55kW - electric shaft lifting with saws about 0.55kW - central lubrication - smooth feed speed control on the inverter (1.5kW) 8-48m/min - main motor 55kW - extraction spigot diameter 300mm - total dimensions length/width/height 2540x1480x2570mm - weight about 3500kg Advantages: – made in Germany – 5pcs of blades fi350mm in ...

Multiplier piston for die-casting machine TF 1350, SC1400, 161104501, Italpress, used - overhauled Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The part was bought from a spare parts store of a company, has been overhauled by a specialised company and is in a very good condition and fully functional. - Suitable for Italpress TF1350 die-casting machine - Piston diameter 219mm, - Piston rod diameter 115mm, - Total length 470mm, - approx. 70 kg - Including the piston rings required for the piston

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways620 mmTransverse stroke260 mmLongitudinal stroke795 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmMax. torque (40% DC)525 NmTorque (100% DC)410 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,03 x 2,2 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Y-Axis PartingTechnology cycle to parting off the workpiece by the Y-axis to ac ...

Multiplier cylinder for die-casting machine TF 1350, SC1400, 162007110, Italpress, used - overhauled Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The part was bought from a spare parts store of a company, has been overhauled by a specialised company and is in a very good condition and fully functional. - Suitable for Italpress TF1350 die-casting machine - Cylinder inner diameter 220mm, - Cylinder outer diameter 270mm, - Total length 420mm, - approx. 65 kg - Including the required sealings

GeneralMilling Specification; Control: Control M730UM with CELOS CharacteristicsMax machining diameter278 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle11/15/15 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeRotary tool spindle speed10000 rpmMovements X / Z260/590 mmNumber of tool stations12 Speed max.6000 rpmBar diameter max.52 mmSwing- Ø, max.755 mmMax. Turning Length192 mmWeight approx.4900 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (Left Spindle) 15/ 11 kW, 6,000 min-1(Left Spindle) High-Output Spindle 15/11 kW (20/15 HP), 6,000 min-1 The NLX ...

Automatic multi-platform saw with leaf adjustment and part back conveyor Neumann Type: MRF 16/4.000: Technical data: Follow later!

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmLongitudinal stroke850 mmTransverse stroke300 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)4,46 x 1,88 x 2,30 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...