135,386 used machines on RESALE, but how to find them? Machine Search
A Dentsply porcelain firing furnace for dental laboratories is available. Power: approx. 1.2kW, max. temperature: 1200°C, weight: approx. 30kg. An on-site inspection is possible.
Komptech Multistar One Sternsieb w. electr. Drive # 7322 Equipment: EU Declaration of Conformity Feed hopper Anthology Machine documentation 5 inch touch panel Electric Hydraulic Pump HyDrive 2.0 MS ONE Doppstadt Siebdeck 60/90 Drive motors (2 pcs.) Fine grain discharge belt Oversize discharge conveyor Hook Lift axle Shunting drawbar Condition: Servicemaintained Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.
Overview The labeler was manufactured in 2004 by the German manufacturer Krones. The machine was regularly maintained and is still installed in a bottling line. As the selling mineral water company is not using the whole bottling line any more, they are selling the used machines, which are still in good shape. Tech. Details Output: 16,000 - 20,000 bph Formats: 0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l Set 1 Pitch circle: 720 mm Number of plates: 15 Number of labelling stations: 2 Rotation: counter clockwise Glue pumps included Checkmat label inspection for label presence Date coder included Stainless steel glue roller infeed and output direction in line
Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)
MultiFlex superfinishing machine for machining cylindrical and wave-shaped workpieces with superfinishing belt. Machine type: Multiflex 722/2 Machine No.: 770041 Technical data Superfinish strip processing of handlebars Workpiece length: max. 1000 mm Workpiece diameter: max. 100 mm Ball screw diameter: max. 35 mm Condition: Technical – good / Optical – used (Pictures partly similar)
Chocolate wrappers,speed up to 60 packages per minute. Wrap the munchmellow with aluminum foil. Manual feeding. The machine has been fully serviced, the machine is in working order. Video of machine operation available
New feeding conveyors for lines. Length and width according to the customer's request.
Automatic motor spindle lathe: Tornos Type / Model: MultiAlpha 8x20 Condition: used Year of Make: 2008 Machine hours: 45017 h Technical data Capacities & Travel Distances Bar passage (round material) up to max. 22 mm (with turned rods up to max. 25 mm) Workpiece length max. 100 mm Longitudinal travel (Z-axis) 80 mm Cross slide path (X-axis) 50 mm End units (longitudinal slide) 200 mm Spindle & Axes Main spindle 8 independently driven motor spindles Sub-spindle one sub-spindle, with max. 5 machining tools and max. 3 driven machining operations possible Total axles 34 axles Tool slide 7 Cross slide X/Y (position 1 - 7) 1 parting carriage X (position 8) 7 longitudinal slides (positions 1- 7) Drive power & speeds Main spindle speed 0 - 8,000 1/min Power main spindle motor 11.2 kW Torque main spindle 17Nm (optionally up to 25 Nm) Speed of sub-spindle max. 8,000 1/ ...
Tornos CNC-controlled multi-spindle automatic lathe Type / Model: Torno Multi Deco 20.8 Condition: Used, very neat condition Machine hours: approx. 65724 h Technical data: Rod diameter 5-20 mm max. piece length (without counter-operation) 100 mm max. piece length (with counter-operation) 80 mm Spindle rotation speed up to 5000 rpm max. spindle power 15 kW max. bore/internal threading power 3.7 kW Number of numerical axis 22 Grooving carriage (axial) 2 Cross guide carriage (radial + axial) 5 Long slide 7 Parting Carriage 1 Sub-spindle motor power 1.1 kW Dimensions (LxWxH) approx. 5880 x 1400 x 1950 mm Weight approx. 7200 kg Costs for delivery by freight forwarder free curbside see shopping cart or for inquiry items in the individual offer.
Tornos CNC-controlled multi-spindle machine Type / Model: Tornos MultiDeco 20.6 Condition: used Hours: 45300 h Rods Ø 5-22 mm Max. piece length without counter operation 100 mm Max. piece length with counter operation 80 mm Spindle rotation speed up to 4000 rpm Max. spindle power 15 [kW] max. bore/internal threading power 3.7 [kW] Sub-spindle motor power 1.1 [kW] Number of numerical axes 17 Axial slides 5 Cross guide carriage (radial and axial) 5 (pos. 1 to 5) Parting Carriage 1 CNC-controlled counter-operation guide carriage with up to two back-processing tools (item 7) Connected load 35 kW Dimensions (LxWxH) approx. 8053 mm x 1508 mm x 2210 mm Weight approx. 8500 kg
Overview This rotary cold-glue labelling machine was manufactured in 2016 by Germany KRONES. The machine is designed for high-speed beverage bottling lines and is equipped with three cold-glue labelling aggregates for front, back and neck labels. The machine is used and still under power. Technical data Capacity: approx. 33,000 bottles/hour Formats: 0.75 GDB DN2 0.5 L longneck beer 0.33 L longneck 0.25 L individual bottle Application: Cold-glue labelling of beverage bottles Configuration: 2.400-40-188.5, 3 cold-glue labelling aggregates Label positions: Front, back, neck Integrated systems: Domino coding system, Krones Checkmat 731 inspection system, Plasmatreat for seal label
Description MultiGraf CF375 Creaser Folder from 2012 Government machine with very low efficiency, top condition Vacuum belt pile stacker with top feed Feeding capacity 180 mm Multigraf swing bar creasing system Touch screen control Creases and folds up to 6,000 sheets per hour Three configurations: Creasing and folding machine / folding only / creasing only Shingle conveying Max. sheet size 375 × 660 mm or 1,050 mm with extension Min. sheet size 105 × 148 mm Max. paper weight 400 g/m² Min. Paper weight 80 g/m²
Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change tool holder: Quick-change boring bar holder -Type: Multifix AJ 3080 -Recording dimensions: see photos -Tool holder: Ø 30 mm -Quantity: 1x steel holder available -Dimensions: 80/60/H70 mm -Weight: 0.8 kg
A solvent cleaning system AMA Universal is offered for cleaning, degreasing and drying metal and plastic parts. Inspection by appointment possible. Number of monitoring channels: 8, Solvent fill quantity: approx. 160l, Solvent weight: approx. 194kg, Tank volume: approx. 105l, Max. basket load: 80kg, Cycle capacity: up to 80kg/cleaning cycle, Cycle time: approx. 20min, Working chamber diameter: approx. 450×610mm, Loading opening diameter: approx. 450mm, Drum diameter: approx. 510mm, Drum depth: approx. 600mm, Air flow rate: 230m³/h, Steam pressure: 5bar, Steam temperature: 149°C, Water pressure range: 3-5bar, Compressed air connection: 6-7bar, Control: PLC. Inspection by appointment possible.
A CNC PCB drilling and milling machine for PCB manufacturing is available. Stations: 2, Speed: 125000rpm, Collet: 3.175mm, Tool diameter range: 0.1mm-6.35mm, Working dimensions X/Y: 630mm/765mm, Positioning accuracy: 5µm, Repeatability: 4µm, Rapid traverse: 25m/min. Documentation available. An on-site inspection is possible.
Overview This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time. Technical Details Capacity 28,800 bottles per hour 1,200 crates per hour Recently processed parameters Bottle dimensions 500ml Outer diameter: 65,50mm Total height: 206,30mm Crates Formation 6x4 Length crate: 400mm Width crate: 300mm Height: 255mm Box inlet direction: transverse Electrcial connection: 400/ 230V, 50Hz, 15 A
Overview This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data Capacity: 30,000 bottles/h (0.33 L, 6-packs) Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm Formation of packs: 2×3 (six-pack wraparound) Operating hours: 1,677 Construction: Full stainless steel Glue type: Hotmelt Scope of Delivery Wraparound packer | Krones | Solidpac | 2006 Infeed conveyors for bottle supply and dividing system
Overview The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details Output: up tp 50,000 bph Last used for: 0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l GDB Inspection modules Bottom inspection camera Sealing surface inspection camera Thread inspection camera with cone optics Side wall inspection camera Contour detection and color detection with camera Accessories/scope of delivery Ejector some spare parts available some conveyors
Width: 650 mm, Length: 1650 mm, Infeed height: 1070 mm, Slit: 2 mm, Power: 3 x 400V, 50Hz, 16A, Dimensions: 1800 x 1250 x 1200 mm, Weight: 1000 kg
Width: 450 mm, Length: 1800 mm, Infeed height: 1350 mm, Slit: 2 mm, Power: 3 x 400V, 50Hz, 16A, Dimensions: 1900 x 1100 x 1450 mm, Weight: 860 kg
Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details Leistung: bis zu 50.000 bph Bauart Rotierend Arbeitsrichtung gegen den Uhrzeigersinn (r-l) Modulare Maschine Höhe des Förderbandes: 1150 mm Etikettentyp: Kaltleim Position des Etiketts Brust/Hals Stanniol Körper Rücken Siegel Flaschenformate 0,25l Vichy-Flasche 0,5l GDB 0,7l GDB 0,75l Gastro-Flasche Anzahl der Aggregate: 3 Teilkreisdurchmesser: 1800 mm Anzahl der Flaschenteller: 45 ...
Overview The rinser cleans and sterilizes containers and was built in 2000 by the German manufacturer Krones. The machine has already been disassembled and put into storage. Technical details Capacity: up to 32.000 containers/ h Number of rinsing stations: 50 (some of them are missing) Running direction: counterclockwise Container: glass + plastic Wetted parts in V2A Central lubrication Extensive documentation available Electropneumatic valve control Siemens S7 control Voltage: 400 / 230 V Frequency: 50 Hz Control voltage: 24 V DC
- Double steering - Wheel diameter - Platform size 7100 x 2500 mm - Inspection valid 11.2025
Overview This isobaric filler was manufactured in 2011 by the German company ICS (Industrial Control Systems). The multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 model is a high-precision filling system equipped with 24 electro-pneumatic filling valves featuring double pre-evacuation, ensuring low oxygen pickup and optimal filling performance for beer and other carbonated beverages. The monobloc system includes both a 6-head crown capper and a 6-head screw capper, offering flexible closure options. The machine has 7,200 operating hours, is in very good condition, and offers a maximum capacity of 6,000 bottles per hour. Technical data Application: Beer and other carbonated beverages Capacity: 6,000 bph Filling Valves: 24, electro-pneumatic with double pre-evacuation (VK-EP-2V) Ring Bowl Diameter: 960 mm Capping Heads: 6 × crown cork (KK) + 6 × screw cap (SV) Pitch: 125 mm Operating Hours: ...
Overview This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pi ...
Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt
Carousel Turning and Milling Machining Center with 2 machines + 7-pallet storage + 2 setup stations Each equipped with multiple turning and milling units (vertical/horizontal) Capto C6 or HSK100 Manufacturer: Waldrich Coburg Year: 2005 1 x MultiTurn 1500 FM, 1 x Multitec 2000 Control: Siemens Find more here - .ucymachines/ Contact us at - sales@ucymachines
A microprocessor-controlled dental ceramic firing furnace is available. Firing temperature: 1200°C, firing chamber diameter: 85mm, firing chamber height: 67mm, machine dimensions X/Y/Z: approx. 280mm/430mm/410mm, weight: approx. 25kg. Documentation available. An on-site inspection is possible.
CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2009 CNC Control: Global Control Plus Track width: 4,000 mm 2 x Hypertherm HPR260 powered plasma Raceway length: 10 m 2 x Schwinger conveyor table Size each 3x3 m without filter system
Heidolph Multi Reax Multi-Tube Stirrer Speed: 150 to 2,000 rpm (electronically controlled) Orbital stroke: 3 mm Timer: up to 999 minutes with end-of-cycle signal Capacity: 26 tubes from 10 to 16 mm or 12 tubes from 16 to 32 mm Maximum load: 1.5 kg Dimensions: 270 × 172 × 410 mm Weight: approx. 9.8 kg Power consumption: 50 W Included: 2 original accessories
A Koebau centerless cylindrical grinding machine is offered for the high-precision grinding of cylindrical workpieces. Main motor power: 18.5kW, min./max. grinding diameter: 2mm/100mm, max. workpiece length: approx. 600mm, grinding wheel dimensions X/Y: 600mm/200mm, regulating wheel dimensions X/Y: 300mm/200mm, grinding speed: 45m/s. The machine is equipped with a material feeding system, a singulation unit, a robust base frame and a stepped platform. Overall dimensions X/Y/Z: approx. 2500mm/2100mm/2200mm, weight: approx. 4200kg. An on-site inspection is possible.
used
tool clamping area: . mm weight: . t approx. 53 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
11132026 Krones Varioline 2M Automatic Glass Bottle Basket-Carrier Multipacker Krones Varioline 2M is a modular, fully automatic secondary packaging machine designed for grouping and packing glass bottles into printed paperboard multipacks. Machine was built in year 2017 and it has been in operation only approx. 8000 hours. This machine is configured for producing open-top, basket-style bottle carriers incorporating an integrated carrying handle and internal bottle-separating partitions. The carton forming section consists of two integrated processing modules and three servo-controlled portal handling robots Module 1 – Robot 1, Module 2 – Robot 1, and Module 2 – Robot 2.Flat paperboard blanks are introduced into the machine, erected and formed into basket carriers. Glass bottles are supplied through the integrated product infeed, grouped into the required formation and transfer ...
Multivac R 145, film width 320 mm, trigger 200 mm, format 2.1, rigid film, MAP. Top condition
Multiweigh 10 heads Multihead weigher., Stunning multihead weighers from Multiweigh. They are in a very good condition ready for production., - Large stainless steel buckets, - Ridigized, - 10 heads with in-feed ring, - Collection gate
For Sale: Multivac T700 Automatic Traysealer – Excellent Condition, We are offering a pre‑owned Multivac T700 Traysealer, ideal for food producers, packaging businesses, and industrial applications. This reliable and versatile machine is in very good working condition and ready to go straight into production., Key Features & Highlights:, - Automatic tray sealing machine designed for high‑volume industrial packaging., - Suitable for sealing trays made of plastic, aluminum, cardboard, and foam with a wide range of sealing films., - Robust stainless steel construction for durability and hygiene., - User‑friendly operation with quick tool change‑over., - Can be used for standard tray sealing and MAP, Specifications (approximate):, - Model: Multivac T700 Automatic Traysealer, - Condition: Used, in very good state, - Cycle speed: Up to ~20 cycles per minute (sealing only), WITH MAP d ...
Yamato ADW 514 multihead weigher, MHW : Yamato Sigma 514SV, Ingress Protection: :IP65, Weighing capacity : 20 - 2000 grams per dump, Weighing volume : max. 5 liter per dump, Configuration Details:, Machine completely built in 304 Stainless steel., TC : 15 degrees, vibratory type, LFP’s : Sigma Type, Feed Buckets : Double door opening, Bucket volume : > 2,5 liter, Weigh Buckets : Double door opening, Bucket volume : > 2.5 liter, Collating chutes : 60 degrees, HMI : RCU810 color touch screen, The model comes with a newer upgraded RCU (control panel)., MHW: Yamato Sigma 514SV, HMI: RCU810 color touch screen, Bucket volume: > 2.5 liter
Automatic Bar Feeder Manufacturer : Gucchi - BLT Model : Multi L-6 Year of construction 2024 little used incl. documents Int.Nr: -
: gebraucht : WA0180 : prompt, Zwischenverkauf v : 1800 € : 1 : 3100 mm : 80 mm : 80 mm : 86° 10/15/20/30/40/50mm mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Electric staple stapling machine with 2 stapling heads for block and saddle stitching
General SKU257Y272 LocationBarneveld CEcheck MakeBeckman Coulter Specified Features - Quality control MotorLess then 55 W, 230 V General SerialB23005 TypeMultisizer 4e Mach.No.BB41115 Year of construction2018 Floor space0,64 x 0,61 m Total height0,51 m Weight45 kg Extra SpecificationsParticle sizing range (diameter) 0.2–1,600 µmVolume 0.004–2.145 × 10⁶ µm³ (fL)Aperture size 10–2,000 µm (nominal diameter)Number of pulses measured: up to 525,000 per analysisQuality controlGeneric medicinesOintmentsOther pharmaceuticsSolid pharmaceuticsBiopharmaceuticalBeckman CoulterLaboratory Equipment > Quality controlIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Pharmaceutical > Other pharmaceuticsIndustries > Pharmaceutical > Solid pharmaceuticsIndustries > Pharmaceutical > BiopharmaceuticalBrand > Beckman Coulter What yo ...
General SKU315Y653 LocationBarneveld CEcheck MakeErweka Main Features MaterialGlass Volume8 Ltr. Motor0.5 KW Specified Features - Tumbler mixer Tumbler mixercheck Capacity2x 3,5 l. &: 8 l. Length/Depth3,5 l: 150 x 150 x 150 mm: 8 l. : 200 x 200 x 200 mm Inlet3,5 l: 150 mm: 8 l.: 200 mm With motor0,5 kW 220V With variable speed drivevariable speed (control) Speed mixer20 — 400 rpm MaterialPlexiglass/acrylic glass, Stainless steel 1.4301 (304) General Serial101162 TypeAR 401 Year of construction1995 Floorspace0,45 x 0,4 m Total height0,44 m Weight40 kgPowdered foodsGeneric medicinesTea, herbs & coffeeTumbler mixersAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicErwekaIndustries > Food & Feed > Powdered foodsIndustries > Pha ...
sheet width: 3200 mm plate thickness: 4.0 mm ST distance between columns: 3300 mm upper clamping bar adjustment: 400 mm Adjustment folding beam: 80.0 mm pivoting angle: 180 Grad clamping capacity max.: 200 KN rear stop: 10.0 - 1600 mm oil volume: 160 Liter total power requirement: 9.8 kW weight: 8500 kg range L-W-H: ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC DNC 80 PP Swiveling control panel, front right 2D graphic display for display and multiple simulation 2D graphic programming Easy handling - CNC electro-motorized backgauge Travel range 10.0 - 1,600 mm Pneumatic / lowerable stop fingers Adjustment speed max. 250 mm/sec. Rear sheet support table with brushes - Electro-motorized l ...
plate thickness: 6.5 mm thickness at Niro-steel: 5.0 mm angle adjustable from - to: 30 - 140 Grad no. of strokes: ca. 50 Hub/min table:: 950 x 1030 mm blade length: 220 x 220 mm total power requirement: 4.0 kW weight: 800 kg range L-W-H: 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition () special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools - manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VA The data for this ad was created with ModulMWS - ...
width of the strips: 100 mm band length: 2000 mm band speed: 15/30 m/s total power requirement: 3,0 kW weight of the machine ca.: 159 kg dimensions of the machine ca.: 768 x 1185 x 1417 mm Mobile belt sander PASOVEC 75 RUNNER Pasovec 75 RUNNER - the special belt grinder developed for Surface grinding applications, especially for grinding weld seams in the material surface. Pasovec 75 Runner removes unwanted layers that occur when Sheet metal rolling or after sheet metal cutting with plasma or oxygen arise. Innovative, multifunctional machine Stepless adjustment of the grinding depth Equipped with a dead mans switch Station for flat grinding small workpieces Low running costs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching force: 45 t hole diameter in sheet thickness: Ø 27x13 mm : 24 /min L-beam 90°: 80x80x8 mm L-beam 45°: 60x60x6 mm flat steel: 200x13 mm : 7 mm engine output: 2,2 kW weight: 760 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 27 mm diameter - Rectangular notching device compl. with hold down - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 400 kN stroke length max.: 285 mm working feed: 9 mm/sec return speed: 20 mm/sec : 660x1250 mm work height max.: 930 mm toolpiece height max.: 250 mm total power requirement: 4 kW : 200x26 mm bending capacity max. - round: 60x5,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 200 kN stroke length max.: 200 mm working feed: 10 mm/sec return speed: 20 mm/sec : 480x1060 mm work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 2,2 kW : 200x12 mm bending capacity max. - round: 48x4,0 mm weight: 500 kg Overall size: 1010x480x1120 mm Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
