multi spindle used for sale

Hand spindle press to push pins in printed circuit boards 2 presses on a plate, with a dial indicator.

M. No.: 1767

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800

BALLISTRINE- C 70 N- auto feed thru (2) sided shaper(2) 10HP; 3PH spindle motors • (2) 30mm diameter spindles with 5in. under the nut • Spring loaded floating spindles • In-feed and out-feed rubber covered upper feed rollers • Working width 14.4in. (360mm) max • Working height 4.8in. (120mm) max • Min working length 9.6in. (240mm) • Spindle 8,000 RPM • feed 3 to28..Price-$8,900

Key data: 35 KW, 1500 1/min

Main spindle drive, 2AD160C-B35OB1-BS03-C2N1, R911264677, Rexroth, overhauled-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Bosch Rexroth and is therefore in a mint condition. - Asynchronous motor, main spindle drive - Power: 37,7 - 55,5 KW - 380V / 3 in. - 1500 - 6000 rpm - 240 Nm - 93,5 A - 280kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Type MX5117B Work table dimensions 1130x670 mm Spindle speed diameter 35 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Transport dimensions 1130x670x1100mm Weight 325 kg

Table dimensions mm: 1000 x 900 With drive system

According to the PDF prospectus!

0: 4 St. 0: 120 mm Feed speed: stufenlos, 3-18 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 3 St. 0: 80 mm Feed speed: (4 Stufen): 4/8/9/18 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Index HE 25 with rod feed hydraulically controlled with long turning device

gebr. Table milling machine MARTIN T27 Fix (rigid milling machine – not swivelling!) Year 2008 Operating hours: 493 h (see last picture) Motor power: 7.5 / 9.5 kW (amplified motor power) Rated current: 24 A Speeds: 3rd / 4th / 5th / 6th / 8,000 / 10,000 rpm Max. diameter milling tool: 250 mm Max. diameter of slitting tool: 350 mm electr. Height adjustment (stroke: 150 mm) Touch screen control (program memory: 100 / tool memory: 500) Table size: 125.5 x 90 cm Milling spindle: 30 + 40 mm MARTIN Cast Stop Jaws Engine brake Spindle blocking: pneumatic Central lubrication Suction nozzle: 2 x 120 mm Dimensions: 295 cm x 140 cm x 186 cm (L x W x H) Weight: approx. 1,300 kg Extras: Electrically adjustable table opening (infinitely variable) Electrical positioning of the milling fence (mechanical infeed jaw) Swivel device for milling fence Centrex Protection (Aigner) ...

Indramat RAC 3.1-150-460-A0I-Z1-220 Spindle Drive Drive Controller For sale is an Indramat / Bosch Rexroth RAC 3.1-150-460-A0I-Z1-220 AC Main Spindle Drive Controller – used, but in good, functional condition Technical details: Supply voltage: 3 × AC 380–460 V Control voltage: AC 230 V Weight: approx. 49 kg Continuous current: approx. 92 A Max. output power approx. 55 kW Ambient temperature: +5 °C to +45 °C (operating), −30 °C to +85 °C (storage) Max. operating altitude: up to 1000 m above sea level Protection class: IP 10, humidity class "F" according to DIN 40 040 Integrated cooling via fan Integrated emergency stop system Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can  ...

with rod pipe

Linear drive, spindle axis, stroke 1135, EGC-120-1135-BS-25P-S-KF-0H-MR-GV, 556809, Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Festo spindle axis, linear module, liner drive, linear slide EGC-120-1135-BS-25P-S-KF-0H-MR-GV, 556809, Overall dimensions: 1625x130x110mm, approx. 55kg, slide 300x70mm, stroke 1135mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded i ...

High-performance milling spindle, unused                high speed milling spindle, unused   Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                                         FS 40-10-30-4- AOW                                                                                B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

High-performance milling spindle, unused                high speed milling spindle, unused  high speed milling spindle, unused/new   Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                            FS 40-10-30-4- AOW                                                                  B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

Demoor 825-320 oil country lathe. Distance between centers: 3000mm. Swing: 970mm. Swing in carriage: 700mm. Bore: 320mm. New electrical box. Carriage with cone copier. Equipped with chuck.

SN.: 16210512 Equipment / other information: Tool

Weibert WJ-F40 Table milling machine Milling spindle 30mm 90° 4 speeds 1400/3500/6000/8000 rpm Table casting L= 1000mm W= 500mm 2.2 KW 400V Right+Left Run WJ-600300 + Options

Grinding spindle to Hauser coordinate grinding machines. 2 electric spindles with mounting shaft 3mm and 1 compressed air grinding spindle for receiving shaft 3mm. All spindles are tested for function.

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

Spindle motor, electric motor Manufacturer: Baumüller Type: GNAF 132 MV Leistubg: 26kW Rotational speed 1600-3000 rpm 76A 400V

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

Spindle motor, electric motor Manufacturer: Baumüller Type: GFSG 71 M Leistubg: 2.9 kW Rotational speed 2000 rpm 20.4 A 155 V

pressure: manuell t distance between columns: 50 mm dayligth: 50 mm total power requirement: kW weight of the machine ca.: 0,01 t dimensions of the machine ca.: 0,3 x 0,3 x 0,3 m • 4 units available, • bore at bottom, Ø 10 mm, • thread in spindle M 6, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mm turning length: 2000 mm control: Siemens 805 greates pass round over bed: 720 mm bed width: 480 mm spindle diameter in front bearing: 150 mm spindle bore: 106 mm swing diameter over face slide: 430 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Copy router: Wegoma SK6 -Copy router: swiveling -with support rail length: 1910 mm -Motor: 220 V 1.4 kW -Spindle speed: 22000 rpm -Dimensions: 500/460/H1530 mm -Weight: 46.5 kg

Compressive force: 170 t Spindle Ø: 160 mm Table support surface: 700 x 900 mm Plunger area: 500 x 800 mm Gr. Distance between table and plunger: 450 mm Drive motor: 380 V, 11 kW Weight: 8200 kg

Permanent magnet motor, electric motor, servo motor, spindle motor, permanent magnet three-phase servo motor, permanent magnet DC servo motor, DC spindle motor Manufacturer: Fanuc, DC Spindle Motor -Type: 3-S TG 6 -Shaft: Ø 42 x 110 mm -Dimensions: 830/220/H288 mm -Weight: 70 kg

Spindle for plate boring mill, table boring mill, boring mill, milling machine, quill, boring head, Replacement spindle -SK50 holder for: screwing onto the faceplate -Adjustment: SK50 -Dimensions: 220/220/H160 mm -Weight: 20 kg

CNC SPINNING LATHE MANUFACTURER: M+M MODEL: HF450TT/2S SERIAL NUMBER: 26-2453-00 YEAR: 2000 CONTROL MANUFACTURER AND MODEL: Tracktronic Z-AXIS CENTER HEIGHT: 419mm DISTANCE BETWEEN CENTERS: 1200mm Z -AXIS TOOLING ADAPTER: DIN 55027/ Size 15 Z-AXIS DRIVE POWER: 80kW Z -AXIS DRIVE ZF REDUCTION RATE: 1:4 Z-AXIS DRIVE SPEED: 0-1000 RPM step less variable X - SLIDE TRAVEL: 500mm X - SLIDE FORCE: 100kN X - SLIDE VELOCITY: 400mm/min Y - SLIDE TRAVEL: 275mm Y - SLIDE FORCE: 100kN Y - SLIDE VELOCITY: 400mm/min TAILSTOCK TRAVEL: 600mm TAILSTOCK CLAMPING FORCE: 80kN EJECTOR TRAVEL: 450mm COOLANT: yes POWER 3PHASE / 50-60 Hz / 200 - 500 Volts: 3PH/60Hz/480V existing SPECIAL FEATURES OR ADDITIONAL ITEMS: POWER RATING 204 HP (152 Kw), CONTROL VOLTAGE 110VOLT / 24 VOLT DC MACHINE WEIGHT: 22000 kg CONDITION: EXCELLENT - VERY LIMITED USE

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: for lathe -Electrically operated -Max. Speed: 6900 rpm -Admission: M42 x 1.5 mm -Dimensions: 600/390/H355 mm -Weight: 64 kg

Spreading spindle, textile goods feeding device -Original husband spare part -for husband Rolex machines and others -Diameter: 50 mm -Length: 1540 mm -3 common -Weight: 8 kg

Professional spindle grinding machine with aluminum sliding table and tilting device KUSING SFna 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 980 x 450 mm Size aluminium table: 1200 x 360 mm Tilt: 0-45° Weight of the machine: 320 kg Formatting trolley of the highest quality according to the principle of hardened rod guide (ALTENDORF principle) KuSING has been manufacturing woodworking machines since 1991.

Spreading spindle, textile goods feeding device -Original Ehemann spare part -for Ehemann Rolex machines and others -Diameter: 50 mm -Length: 1266 mm -3 common -Weight: 6 kg

Spreading spindle, textile goods feeding device -Original Ehemann spare part -for: Ehemann Rolex machines and others -Diameter: 50 mm -Length: 2570 mm -6 common -Weight: 24 kg

Telescopic spring spindle guard CNC PLC -Type: TF 050-2100-120 V/H -Length: 2100 mm -Diameter: Ø 120 mm -Weight: 4.5 kg

Milling machine, universal milling machine, tool milling machine, two-spindle milling machine, milling machine -Milling machine: Two-spindle milling machine for small parts -Dimensions: see photos -Drive: 0.37 kW each -Coolant device -Dimensions: 1000/850/H1360 mm -Weight: 352 kg

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -Spindle head: Spindle tool for table boring mills, plate boring mills, tilt adjustable -Stroke: 225 mm -Shaft: Ø 50 mm -Dimensions: 330/170/H415 mm -Weight: 48 kg

Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, gear motor -Spindle head: spindle tool 7.4 rpm -Gearbox: Type Z 8 i = 386 -Engine: Groschopp MDM 100.70 0.25 kW -Shaft: Ø 18 mm -Dimensions: 510/185/H240mm -Weight: 12.3 kg

Asynchronous motor, main spindle drive, 2AD100C-B05OB1-AS03-C2N1, R911246799, Rexroth, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. - Asynchronous motor, main spindle drive - Power: 12.6 - 18.9 KW - 380V / 3 pol. - 3000 - 9000 rpm - 40 Nm - 32 A - 58 kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we will refund the purchase price.

Weibert WJ-F10 Swivel spindle milling machine Milling machine: swivel 90°-45° Milling U/min 1400/3500/6000 and 8000 Sliding table 1150mm (Optional 1600mm) Engine power: 400V 3 KW (4.0 hp) WY-600100 Options at extra cost: Telescope 900mm WJ-600108 Eccentric tensioner Milling motor 4 KW (5.5HP), S1 100% Milling motor 5.5 KW (7.5 HP)S1, WJ-600102 Milling spindle 40,50 or 60mm, Integral safety rails 500mm, WJ-500111 Right and left-hand milling machine, WJ-600106 Table extension right/left, WJ-600107 Feed

Spindle drive, Simotics, 1PH8103-1MG02-0BG1-ZNO.YF, Siemens, refurbished-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Siemens and is therefore in a mint condition. - Asynchronous motor, spindle drive - Power: 7,5 KW - 380V / 3 pol. - max. 9000 rpm - max. 77 Nm - max. 42 A - 47 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Asynchronous motor, main spindle drive, 2AD100C-B35OA1-AS03-A2N1, R911264223, Rexroth, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. - Asynchronous motor, main spindle drive - Power: 12,6 - 18,9 KW - 380V / 3 pol. - 3000 - 9000 rpm - 40 Nm - 32 A - 58 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm

Spindle amplifier module, Servo Amplifier Module, CNC Control System, Plug-in card, -Manufacturer: FANUC -Type: A06B-6152-H045H580 -Dimensions: 150/380/H290 mm -Weight: 8.2 kg

1 set of boring bars for main bearing boring mill, carriage via cone, sleeve. Dimensions: DxL 20x940 mm 27x1100 mm 31.5x1400 mm 39.7x1700 mm Sale preferably as a set Price on request

Set of 3 high precision angular contact ball bearings, Spindle bearing, 7020 CD/P4ATBTG130, SKF, new Attention: Original SKF product - No replica from… Special price ! If you have a UID number, we will gladly issue an invoice without VAT. New! The part was bought from a spare parts store of a company and has never been in operation, is completely new. Function guarantee! For second hand parts, we can not provide a conventional warranty and guarantee. However, we do provide a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.