multi spindle used for sale

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways620 mmTransverse stroke260 mmLongitudinal stroke795 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,03 x 2,2 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...

Multi spindle drilling machine Brand: VITAP Type: ALFA DIGIT New machines - QUICK CHANGE SPINDLES - Side reference fences with digital electronic readouts and with manual exclusion for the execution of the system 32 mm drilling holes - Pneumatic cylinder for horizontal/vertical positioning of the boring group - Front caliper with digital electronic readouts - Nr. 2 alu fences with 2 stops each (1500 mm. each) - Quick change fitting of the alu fences with stops - 2 safety clamps inclined 4 degrees - 6 positions turret to adjust the drilling depth (0-80mm) - Height regulation of the boring group by mechanical digital position indicator - Automatic vertical-horizontal depth difference device (10 mm) - Drilling speed adjustment from the panel control - Strengthened steel structure for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropne ...

6 spindles Tapping Cross drilling Thread Rollers Milling apparatus a lot of accessories Feed motor (spindles) defective! with bar feeder IEMCA PRA 40/32 P

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter406 mmDimensions (L x W x H)3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) mDrive power main spindle22/18,5 kWRapid feed X / Z30/30 m/minMovements X / Z260/795 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.2500 rpmBar diameter max.102 mmSpindle bore111 mmMax. Turning Length705 mmWeight approx.6400 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pLeft Spindle through-spindle hole dia. 111 mm (spindle speed 2,500 min-1, 22/ 18.5 kW)(Left Spindle) Through-Spindle Hole Dia. 111 mm (4.37-inch) (Spindle Speed 2,500 min-1, 22/18.5 kW) The NLX 2500 adopts a h ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Speed max.6000 rpmNumber of driven tools12 Power max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Main drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWorking areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axis universal turning machine with - partiall hollow clamping device (hydr.) inner draw tube Ø 52 mm - C-axis and spindle brake (hydr.) - 12 stations circle revolver Sauter reception acc. VDI 30, DIN 69880-30 with tool drive Connection/drive acc. DIN 5480 Direct measuring system, glas scale in X-axis - tailstock; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTransverse stroke210 mmLongitudinal stroke525 mmClamping chuck diameter max.210 mmMain drive 1Drive power (100% DC)13 kWSpeed range20 - 6000 rpmTorque (100% DC)171 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)192 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore73 mmSpindle diametre on front bearing100 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-500 ...

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmClamping chuck diameter max.315 mmLongitudinal stroke1345 mmTransverse stroke260 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightWeight approx.7800 KgDimensions (L x W x H)5,4 x 2,07 x 2,6 mPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs, 2 amperes 4 outputs, potential-freeExcentric turning and milling operationExcentric turning and milling operation (only with Sie ...

Key data: 4 , 14 mm

Multiple drill head from Romai, Sigloch & Schrieder up to diameter 14 mm in steel 4 stations, automatic and manual switching 2 speed ratios choiceable (direct and reduced) incl. adapter MK 4 and flange

Oscillating Drilling Machine COMEC MM0 10 3L Number of horizontal spindles per page 4 Drilling distance between centers during chiselling: min/max: 45/760mm Drilling distance between centers during straight drilling: min/max 45/850mm Hole length 0-100mmm Spindle speed 4500/9000 rpm 3 independently adjustable oscillations Oscillation motor 1.5kw Total power 7kw Pneumatic material clamps Maximum workpiece dimensions 1000x 100x 100mm Capacity 600pcs/h (300+300) CE Certified Year of production 2005 Machine dimensions: 1450x1650x1350cmH Weight about 1000kg

multi spindle bar automatic, Mori Say 8/42 - YOM 2006, CONFIGURATION, - HIRTH coupling for drum locking, - 8 front slides and 8 radial slides, - 4 Compond slides in stations 1, 2, 5, 6, - CUCCHI Pietro bar loader (2007), - Bundle for CUCCHI BLT BUNDLE bar loader (2018), - Pick-up spindle, hydraulic in pos. 8, - preparation for oil fume extraction

- neu aufgebaut, neue Elektrik in 2018, - Schnecken-Späneförderer, - Ölnebelabsaugeinrichtung, - Kühlmittelfilter, selbstreinigend, - Doppelschlitten in Lage 6 zum Abstechen und Rückseitenbearbeitung, - Polygondreh- und Gewindefräseinrichtung Lage 4, - CNC-Kreuzschlitten AUTOR in Lage 5, - Abgreifspindel, hydraulisch in Lage 6, - Transportband für Fertigteile, - Stangenlader Iemca PRA

8-spindle lathe, Number of spindles: 8

Schütte 32 multi-spindle lathe, completely rebuilt by GWM-Tech, Fanuc AC motors, FANUC motors for threading, PLC, pick-up spindle chuck, bar loader Cucchi Pietro

Number of spindles: 6, Max bar diameter [mm]: 25, Spindle speed [rpm]: 4.250, Weight of the machine ca. [kg]: 7.150, Auto bar loader: Cucchi BLT Multi F-6

Hydraulick pickup spindle pos. 6, Clutch for threading, Auto bar loader: Pietro Cucchi

6 spindle bar automatic Gildemeister GS20, compound slide with drive in pos. 1, compound slide with drive in pos. 2, compound slide in pos. 4, compound slide in pos. 5, 4x axial spindle (pos. 1, 2, 4, 5), rotating milling device in pos. 3, pick-up spindle pos. 6, swing rear machining arm drive in pos. 3, swing rear machining arm drive in pos. 6, swarf coneveyor, worm type, set of tool holders, set of cams, Number of spindles: 6, Max bar diameter [mm]: 20, Max bar feed [mm]: 100, Spindle speed [rpm]: 214 - 5.168, Spindle motor [kW]: 11, Weight of the machine ca. [kg]: 5.000, Auto bar loader: Pietro Cucchi

- spindle drum locking by means of a triad of HIRTH-type rings, - central lubrication system, - spindle stop attachment for main spindles, - cross drill device pos. 4, - 6 indipendent frontal slides, - 4 compound slides in pos. 1, 2, 4, 5, - 2 radial slides in pos. 3, 6, - double slide in pos. 6, - pick-up spindle pos. 6, - pick-up spindle stop attachment pos. 6, - conveyor belt for finished parts, - chip conveyor, hinged belt type, - high pressure coolant system, - removable coolant fluid tank, - bar stock reel for bar length 3 m, - various camms, - various gears, Number of spindles: 6, Max bar diameter [mm]: 32, Spindle speed [rpm]: 250 - 4.250 (250 - 3.350), Spindles interaxis [mm]: 276, Max bar feed [mm]: 125, Weight of the machine ca. [kg]: 9.500

Number of spindles: 6, Max bar diameter [mm]: 20, Spindle speed [rpm]: 500 - 6.000, Weight of the machine ca. [kg]: 5.000, Auto bar loader: Iemca SIR 25 P 33

- spindle drum locking by means of a triad of HIRTH-type rings, - central lubrication system, - spindle stop attachment for main spindles, - 2x spindle positioning attachment (pos. 6 + 7), - 8 indipendent frontal slides, - 4 compound slides in pos. 1, 2, 5, 6, - 4 radial slides in pos. 3, 4, 7, 8, - double slide in pos. 8, - 2x pick-up spindle (pos. 4 + 8), - 2x pick-up spindle stop attachment (pos. 4 + 8), - threading attachment, - chip conveyor, hinged belt type, - high pressure coolant system, - removable coolant fluid tank, - bar stock reel for bar length 3 m, - various camms, - various gears, - electrical preparation for auto bar loader, Number of spindles: 8, Max bar diameter [mm]: 32, Spindle speed [rpm]: 270 - 3.750 (270 - 3.200), Spindles interaxis [mm]: 360, Max bar feed [mm]: 125, Weight of the machine ca. [kg]: 11.500

Gildemeister GM 16-6AC, 4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5, 4x indipendent feed - Pos.1; Pos.2; Pos.4; Pos.5, threading device, 1x threading spindle, pick-up spindle, broaching device, set of cams, set of collets, bar-loader Cucchi Giovanni (YOM 2004), Working hours: 13.600

Gildemeister GM20, Country of origin: Italy, Operating hours: 0, Number of spindles: 6, Max bar diameter [mm]: 20, Auto bar loader: Cucchi Giovanni alternative IMG Easy load

X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for ...

Mori Say TM626 AC, - 5 axial slides, - 4 cross slides, - double slide pos. 6, - pickup spindle, - swarf conveyor with vibrating filter device, - high pressure coolant system, - set of tool holders, - IEMCA PRA auto bar loader L = 3 m, Country of origin: Czech Republic, Operating hours: 30.500h - (in date 29/07/2025), Number of spindles: 6, Max bar diameter [mm]: 26, Spindle speed [rpm]: 500 - 6.000, Spindle motor [kW]: 20, Total power requirement [kVA]: 40, Weight of the machine ca. [kg]: 5.500, Auto bar loader: bar stock carrier for barlengts 3 meter

TOYOSK 01BB Fixed 12 Multi Spindle Machine Manufacturer: TOYOSK Type: 01BB Year of manufacture: 1974 Spindle: 12 Bore: 6mm, 12 points simultaneously Feed: 100mm Speed: 2-speed (2500 / 2850rpm) Spindle diameter: 19-23 mm Table size: 350 x 450 mm Spindle speed: 2200-450 mm Power: 1.5 kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

TOYOSK 01C550T Fixed Spindle Pitch 48 Spindle Tapping Machine Year of Manufacture: 1984 Speed ​​(3 stages): 450 / 700 / 1100 rpm Speed ​​Change: Mechanical (stepped stages) Spindles: 48pcs Tool Holder Type: Spring/Clamp Chucks Combined drilling + tapping is also possible. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

TOYOSK 0-PTMS fixed spindle pitch high speed 12-spindle tapping machine Year of manufacture: 1987 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanics, small holes / threads. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Number of spindles 8 Max. bar feed in one station: 130 mm Max. bar feed in two stations: 260 mm Max. stroke radial slide: 52 mm Radial slide adjustment: +- 12 mm Max. stroke axial slide: 72 mm Max. stroke tool spindles: 106 mm Adjustment of tool spindles: +- 10 mm Main spindle speed: 500 - 4,000 1/min Piece time: 2 - 80 s Number of tool positions: 18 Weight: 12,600 kg

Number of spindles: 6, Max bar diameter [mm]: 20, Spindle speed [rpm]: 500 - 6.000, Weight of the machine ca. [kg]: 5.000, Auto bar loader: CUCCHI BLT Typ MULTI F-6, Model AN / PB20, Version 3,3 M, Working hours: 1996

multi spindle bat automatic, GWM TECH S42-6 AC, automatic bar loader, Cucchi Pietro

Works wonderfully

Gildemeister GM42 AC Hirth, - Spindle drum locking by means of a triad of HIRTH-type rings, - Cross slide including drive in pos. 1, 2, 4, 5, - Hydraulic pickup spindle, - Internal flushing for pickup spindle, - Spindle stop attachment for pickup spindle, - Hydraulic slide for rear working with two positions in pos. 6, - Pneumatic part catcher, - Conveyor belt for finished parts, - 5x frontal spindles, rotating, with internal coolant supply, - AC threading device, - Bar feed exclusion device, hydraulic, - Chip conveyor, hinged belt type, including magnetic filter, - High pressure coolant system 100 bar, - CO2 fire fight system Total Walther, Number of spindles: 6, Max bar diameter [mm]: 42, Spindle speed [rpm]: 500 - 2.700, Max. bar feed in one station [mm]: 130, Max. travel of toolspindles [mm]: 120, Max. stroke of cross slides [mm]: 59 (pos. 1, 2) | 52 (pos. 3, 4, 5, 6), Ma ...

Dimensions (L/W/H): 2920x980x1450 mm Weight: 1500 kg Total power requirement: 12 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible.

This 4-axis MURATA Muratec MD 120 was manufactured in 2009. A CNC 2-spindle, 2-turret precision lathe with FANUC FS31i – Model A control, it features a max turning diameter of Ø 120 mm and a max turning length of 75 mm. Spindle speeds reach up to 4,500 rpm, and it includes a chip conveyor. If you are looking to get high-quality turning capabilities, consider the MURATA Muratec MD 120 machine we have for sale. Contact us for more information.

This 3-axis QUICK CNC KQ-63E was manufactured in 2025. Its a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information.

This 4-axis KOCH BL 2500 NC select line was manufactured in 2019. Ideal for multi-spindle drilling, this machine ensures precision and efficiency in your production line. Consider the opportunity to buy this KOCH BL 2500 NC select line multi-spindle drilling machine. Contact us for more information.

Schütte SF51 6-spindle bar machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle bar machine with 51 mm spindle passage, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch that provides high process stability and flexibility in turning, drilling, and tapping. The machine is appreciated for its stability and flexibility in the production of demanding workpieces Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle bar machine Number of spindles: 6 main spindles Control: Conventional Spindle passage: 51 mm Feed max. 125 mm Turning length max. 102 mm Drilling depth max. 102 mm Tapping device Chip conveyor 6-fold loading magazine Voltage: 400 V Year of Make: 1979 Dismantling and removal by buyers Dismantling also possibl ...

This 9-axis MORI SEIKI NZ2000 was manufactured in 2008, offering advanced capabilities for precision horizontal turning. Ideal for complex machining tasks, this machine ensures efficient production with its multi-axis configuration. Consider the opportunity to buy this MORI SEIKI NZ2000 horizontal turning machine. Contact us for more information about this machine.

Schütte SF51 6-spindle bar machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle bar machine with 51 mm spindle passage, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch that provides high process stability and flexibility in turning, drilling, and tapping. The machine is appreciated for its stability and flexibility in the production of demanding workpieces Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle bar machine Number of spindles: 6 main spindles Control: Conventional Spindle passage: 51 mm Feed max. 125 mm Turning length max. 102 mm Drilling depth max. 102 mm Tapping device Chip conveyor 6-fold loading magazine Voltage: 400 V Year of Make: 2004 Dismantling and removal by buyers Dismantling also possibl ...

This 12s Index MS42C was manufactured in 1998. It features a maximum bar diameter of 42 mm and operates with a fully automatic system, making it suitable for high-volume precision turned parts. The machine is equipped with a Siemens SINUMERIK 840C control system and AC servo drives, ensuring efficient performance. Consider the opportunity to buy this Index MS42C automation equipment. Contact us for further details.

This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2006. It is a multi-spindle turning machine featuring twin spindles and twin turrets, equipped with a Fanuc 18i-TB control. Key specifications include a maximum turning diameter of 330 mm, turning length up to 500 mm, and bar capacity of 76 mm. Main spindle speed reaches 3500 RPM, while the sub-spindle can go up to 6000 RPM. If you are looking to get high quality turning capabilities consider the DOOSAN Puma TT 2500 SY machine we have for sale. Contact us for more information.

This 12s Index MS42C multi-spindle turning machine was manufactured in 2002. It features a maximum bar diameter of 42 mm and a spindle speed of approximately 5,000 rpm, making it suitable for high-quality turning capabilities. Consider the opportunity to buy this Index MS42C multi-spindle turning machine. Contact us for further details.

This QUICK CNC KQ-62 Lite multi-spindle drilling machine was manufactured in 2025. It handles workpieces from 70 to 2400 mm in length, 9 to 60 mm in thickness, and 30 to 1220 mm in width. Features include a Higerman control system, dual 3.5 kW milling spindles at 18000 rpm, and comprehensive drilling units. Consider the opportunity to buy this QUICK CNC KQ-62 Lite multi-spindle drilling machine. Contact us for more information.

Code: 0405 Brand: VITAP - ITALY Model: ALFA 21 Multiple boring machine for furniture, kitchens, custom furniture, bathroom furniture and various Technical data: N° 21 spindles - Centre distance mm 32 Max drilling depth mm 80 Table dimensions mm 860 x 500 Spindle rpm 2800 Motor power Hp 2,5 Tilting head 0-90° Operating pressure 6-8 atm Overall dimensions mm 950 x 800 x 1140 h Weight kg 300

Multi-spindle drilling machine manufactured in 2000. This SCM Morbidelli Zenith F2 is designed for processing flat materials such as DTD, MDF, laminated boards, and solid wood. It features a maximum working width of up to 3,200 mm and a maximum working height of approximately 800 mm. If you are looking to get high-quality drilling capabilities, consider the SCM Morbidelli Zenith F2 machine we have for sale. Contact us for further details.

Multi-spindle drilling machine manufactured in 2019. This COMEC FMOV 1500 6UF + CA2 features a working width of 1500 mm and a working depth of 300 mm, allowing for efficient processing of long workpieces up to 1500 mm in one cycle. It includes an automatic parts loader and pneumatic clamping for enhanced productivity. If you are looking to get high-quality drilling capabilities, consider the COMEC FMOV 1500 6UF + CA2 machine we have for sale. Contact us for further details.

GeneralUniversal Turning Machine with cycle control and RMS-Sensor; Control: MANUAL PLUS Main drive 1Type of main driveAC Drive power (100% DC)12 kWSpeed range10 - 3000 rpmNumber of Gearsteps2 Max. torque (40% DC)920 NmWorking areaSwing diameter over guide ways500 mmSwing diameter over transverse guideway285 mmCentre height1000 mmTransverse stroke260 mmWork spindle (left)Spindle noseacc. To DIN 55027 Diametre of spindle nose8 Spindle bore70 mmSpindle diametre on front bearing120 mmSlide 1Rapid traverse in X8 m/minRapid traverse in Z10 m/minFeed rate in X5000 mm/minFeed rate in Z5000 mm/minFeed rate torque (100% DC) in X500 daNFeed rate torque (100% DC) in Z1000 daNFloor space/WeightDimensions (L x W x H)3,1 x 1,95 x 1,83 mWeight approx.2900 KgMiscellaneousColour Disk turret, Sauter, DIN 69880-30 mmDisk turret, 8 stations for fix tools, make Sauter, tool reception DIN 69880-30 mm mounted  ...

General2 Axes Universal Turning Machine - tool drive - C axis - Y axis; Control: DMG MORI Slimline Multi-Touch Working areaSwing diameter over guide ways650 mmSwing diameter over transverse guideway465 mmTurning diameter315 mmBar diameter max.80 mmSlide 1Longitudinal stroke600 mmTransverse stroke267 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y10 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)370 NmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,18 x 2,66 x 1,94) mWeight approx.5800 KgPre-setting PackagePre-setting Package: - tool ...