multi spindle lathe used for sale

Description MultiGraf CF375 Creaser Folder from 2012 Government machine with very low efficiency, top condition Vacuum belt pile stacker with top feed Feeding capacity 180 mm Multigraf swing bar creasing system Touch screen control Creases and folds up to 6,000 sheets per hour Three configurations: Creasing and folding machine / folding only / creasing only Shingle conveying Max. sheet size 375 × 660 mm or 1,050 mm with extension Min. sheet size 105 × 148 mm Max. paper weight 400 g/m² Min. Paper weight 80 g/m²

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change tool holder: Quick-change boring bar holder -Type: Multifix AJ 3080 -Recording dimensions: see photos -Tool holder: Ø 30 mm -Quantity: 1x steel holder available -Dimensions: 80/60/H70 mm -Weight: 0.8 kg

A solvent cleaning system AMA Universal is offered for cleaning, degreasing and drying metal and plastic parts. Inspection by appointment possible. Number of monitoring channels: 8, Solvent fill quantity: approx. 160l, Solvent weight: approx. 194kg, Tank volume: approx. 105l, Max. basket load: 80kg, Cycle capacity: up to 80kg/cleaning cycle, Cycle time: approx. 20min, Working chamber diameter: approx. 450×610mm, Loading opening diameter: approx. 450mm, Drum diameter: approx. 510mm, Drum depth: approx. 600mm, Air flow rate: 230m³/h, Steam pressure: 5bar, Steam temperature: 149°C, Water pressure range: 3-5bar, Compressed air connection: 6-7bar, Control: PLC. Inspection by appointment possible.

Overview  This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time.    Technical Details    Capacity  28,800 bottles per hour   1,200 crates per hour   Recently processed parameters  Bottle dimensions  500ml   Outer diameter: 65,50mm   Total height: 206,30mm  Crates  Formation 6x4   Length crate: 400mm   Width crate: 300mm   Height: 255mm  Box inlet direction: transverse  Electrcial connection: 400/ 230V, 50Hz, 15 A 

Net weight= 570 kg,

Net weight= 450 kg,

Overview  This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  Capacity: 30,000 bottles/h (0.33 L, 6-packs) Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm Formation of packs: 2×3 (six-pack wraparound) Operating hours: 1,677 Construction: Full stainless steel Glue type: Hotmelt Scope of Delivery  Wraparound packer | Krones | Solidpac | 2006 Infeed conveyors for bottle supply and dividing system  

Overview  The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details  Output: up tp 50,000 bph Last used for:  0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l GDB Inspection modules Bottom inspection camera Sealing surface inspection camera Thread inspection camera with cone optics Side wall inspection camera Contour detection and color detection with camera Accessories/scope of delivery    Ejector some spare parts available some conveyors

Width: 650 mm, Length: 1650 mm, Infeed height: 1070 mm, Slit: 2 mm, Power: 3 x 400V, 50Hz, 16A, Dimensions: 1800 x 1250 x 1200 mm, Weight: 1000 kg

Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details Leistung: bis zu 50.000 bph Bauart Rotierend Arbeitsrichtung gegen den Uhrzeigersinn (r-l) Modulare Maschine Höhe des Förderbandes: 1150 mm Etikettentyp: Kaltleim Position des Etiketts Brust/Hals Stanniol Körper Rücken Siegel Flaschenformate 0,25l Vichy-Flasche 0,5l GDB 0,7l GDB 0,75l Gastro-Flasche Anzahl der Aggregate: 3 Teilkreisdurchmesser: 1800 mm Anzahl der Flaschenteller: 45 ...

Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pi ...

Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt

Carousel Turning and Milling Machining Center with 2 machines + 7-pallet storage + 2 setup stations Each equipped with multiple turning and milling units (vertical/horizontal) Capto C6 or HSK100 Manufacturer: Waldrich Coburg Year: 2005 1 x MultiTurn 1500 FM, 1 x Multitec 2000 Control: Siemens Find more here - .ucymachines/ Contact us at - sales@ucymachines

A microprocessor-controlled dental ceramic firing furnace is available. Firing temperature: 1200°C, firing chamber diameter: 85mm, firing chamber height: 67mm, machine dimensions X/Y/Z: approx. 280mm/430mm/410mm, weight: approx. 25kg. Documentation available. An on-site inspection is possible.

Heidolph Multi Reax Multi-Tube Stirrer Speed: 150 to 2,000 rpm (electronically controlled) Orbital stroke: 3 mm Timer: up to 999 minutes with end-of-cycle signal Capacity: 26 tubes from 10 to 16 mm or 12 tubes from 16 to 32 mm Maximum load: 1.5 kg Dimensions: 270 × 172 × 410 mm Weight: approx. 9.8 kg Power consumption: 50 W Included: 2 original accessories

A Koebau centerless cylindrical grinding machine is offered for the high-precision grinding of cylindrical workpieces. Main motor power: 18.5kW, min./max. grinding diameter: 2mm/100mm, max. workpiece length: approx. 600mm, grinding wheel dimensions X/Y: 600mm/200mm, regulating wheel dimensions X/Y: 300mm/200mm, grinding speed: 45m/s. The machine is equipped with a material feeding system, a singulation unit, a robust base frame and a stepped platform. Overall dimensions X/Y/Z: approx. 2500mm/2100mm/2200mm, weight: approx. 4200kg. An on-site inspection is possible.

tool clamping area: . mm weight: . t approx. 53 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

11132026 Krones Varioline 2M Automatic Glass Bottle Basket-Carrier Multipacker Krones Varioline 2M is a modular, fully automatic secondary packaging machine designed for grouping and packing glass bottles into printed paperboard multipacks. Machine was built in year 2017 and it has been in operation only approx. 8000 hours. This machine is configured for producing open-top, basket-style bottle carriers incorporating an integrated carrying handle and internal bottle-separating partitions. The carton forming section consists of two integrated processing modules and three servo-controlled portal handling robots Module 1 – Robot 1, Module 2 – Robot 1, and Module 2 – Robot 2.Flat paperboard blanks are introduced into the machine, erected and formed into basket carriers. Glass bottles are supplied through the integrated product infeed, grouped into the required formation and transfer ...

Multivac R 145, film width 320 mm, trigger 200 mm, format 2.1, rigid film, MAP. Top condition

Multiweigh 10 heads Multihead weigher., Stunning multihead weighers from Multiweigh. They are in a very good condition ready for production., - Large stainless steel buckets, - Ridigized, - 10 heads with in-feed ring, - Collection gate, More photos and full specifications: stcfoodsolutions.nl/en/machine/multiweigh-hdw-10-multihead-weigher-10- weigh-hoppers/

For Sale: Multivac T700 Automatic Traysealer – Excellent Condition, We are offering a pre‑owned Multivac T700 Traysealer, ideal for food producers, packaging businesses, and industrial applications. This reliable and versatile machine is in very good working condition and ready to go straight into production., Key Features & Highlights:, - Automatic tray sealing machine designed for high‑volume industrial packaging., - Suitable for sealing trays made of plastic, aluminum, cardboard, and foam with a wide range of sealing films., - Robust stainless steel construction for durability and hygiene., - User‑friendly operation with quick tool change‑over., - Can be used for standard tray sealing and MAP, Specifications (approximate):, - Model: Multivac T700 Automatic Traysealer, - Condition: Used, in very good state, - Cycle speed: Up to ~20 cycles per minute (sealing only), WITH MAP d ...

Yamato ADW 514 multihead weigher, MHW : Yamato Sigma 514SV, Ingress Protection: :IP65, Weighing capacity : 20 - 2000 grams per dump, Weighing volume : max. 5 liter per dump, Configuration Details:, Machine completely built in 304 Stainless steel., TC : 15 degrees, vibratory type, LFP’s : Sigma Type, Feed Buckets : Double door opening, Bucket volume : > 2,5 liter, Weigh Buckets : Double door opening, Bucket volume : > 2.5 liter, Collating chutes : 60 degrees, HMI : RCU810 color touch screen, The model comes with a newer upgraded RCU (control panel)., MHW: Yamato Sigma 514SV, HMI: RCU810 color touch screen, Bucket volume: > 2.5 liter

Automatic Bar Feeder Manufacturer : Gucchi - BLT Model : Multi L-6 Year of construction 2024 little used incl. documents Int.Nr: -

: gebraucht : WA0180 : prompt, Zwischenverkauf v : 1800 € : 1 : 3100 mm : 80 mm : 80 mm : 86° 10/15/20/30/40/50mm mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6.5 mm thickness at Niro-steel: 5.0 mm angle adjustable from - to: 30 - 140 Grad no. of strokes: ca. 50 Hub/min table:: 950 x 1030 mm blade length: 220 x 220 mm total power requirement: 4.0 kW weight: 800 kg range L-W-H: 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition () special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools - manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VA The data for this ad was created with ModulMWS -  ...

width of the strips: 100 mm band length: 2000 mm band speed: 15/30 m/s total power requirement: 3,0 kW weight of the machine ca.: 159 kg dimensions of the machine ca.: 768 x 1185 x 1417 mm Mobile belt sander PASOVEC 75 RUNNER Pasovec 75 RUNNER - the special belt grinder developed for Surface grinding applications, especially for grinding weld seams in the material surface. Pasovec 75 Runner removes unwanted layers that occur when Sheet metal rolling or after sheet metal cutting with plasma or oxygen arise. Innovative, multifunctional machine Stepless adjustment of the grinding depth Equipped with a dead mans switch Station for flat grinding small workpieces Low running costs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 45 t hole diameter in sheet thickness: Ø 27x13 mm : 24 /min L-beam 90°: 80x80x8 mm L-beam 45°: 60x60x6 mm flat steel: 200x13 mm : 7 mm engine output: 2,2 kW weight: 760 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 27 mm diameter - Rectangular notching device compl. with hold down - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 kN stroke length max.: 285 mm working feed: 9 mm/sec return speed: 20 mm/sec : 660x1250 mm work height max.: 930 mm toolpiece height max.: 250 mm total power requirement: 4 kW : 200x26 mm bending capacity max. - round: 60x5,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 200 kN stroke length max.: 200 mm working feed: 10 mm/sec return speed: 20 mm/sec : 480x1060 mm work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 2,2 kW : 200x12 mm bending capacity max. - round: 48x4,0 mm weight: 500 kg Overall size: 1010x480x1120 mm Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 300 kN stroke length max.: 235 mm : 200x24 mm bending capacity max. - round: 60x4,0 mm toolpiece height max.: 250 mm : 660x1250 mm work height max.: 900 mm return speed: 20 mm/sec working feed: 10 mm/sec total power requirement: 3 kW weight: 950 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6.5 mm thickness at Niro-steel: 5.0 mm angle adjustable from - to: 30 - 140 Grad no. of strokes: ca. 50 Hub/min table:: 950 x 1030 mm blade length: 220 x 220 mm total power requirement: 4.0 kW weight: 800 kg range L-W-H: 1100 x 950 x 1280 mm current new price approx. 20.000 euros good condition () special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools - manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VA The data for this ad was created with ModulMWS -  ...

: gebraucht : WA0127 : 1230 € : 1 : 2500 mm : 70 mm : 70 mm : 8/11/12/16/24/36 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ABA MULTILINE 1507 A ist eine Profilschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazität: Tisch 2000x600 mm, Schleiflänge 1500x600 mm, max. Werkstückgewicht 2500 kg, Abstand Tisch-Spindel 900 mm; Wege X1500, Z750, Y900 mm. Technische Daten: stufenlose Vorschübe X 2000–35000, Z 5–5000, Y 1–3000 mm/min; Schleifscheibendrehzahl 50–2500 t/min; Scheibe Ø400x60 mm, Bohrung 127 mm; Spindelmotor 26 kW; Anschluss 3x400V 50Hz; Gesamtleistung 35 kW; Gewicht ~11000 kg; Abmessungen 6465x3770x3000 mm. Zubehör: Papierfilteranlage, Magnetplatte 1500x700 mm, Lampe, Schaltschrank Klimagerät. Erreicht enge Toleranzen; Anwendungen: Automotive, Uhrenbau, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Key data: 1500 KG, 22365 mm, 2200 mm

Technical data for the pallet racking system: Shelving system: META (Thyssen) Type: Multipal S Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 22,365 mm Number of fields per row of shelves: 08 pcs á 2,700 mm Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Number of pallet spaces per row: 72 pcs. Total number of pallet spaces: 72 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 500 kg The scope of delivery includes: 09x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: SR85|20 Profile dimensions: 85 x 75 x 2.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled  ...

HAAS Schleifmaschinen MULTIGRIND CA ist eine CNC Werkzeugschleifmaschine mit hoher Präzision, hoher Genauigkeit und Zuverlässigkeit. Sie verfügt über 5 Achsen: X 630 mm, Y 345 mm, Z 430 mm; Schleiflänge 500 mm; Schleifdurchmesser 260 mm; max. Schleifscheibendurchmesser 250 mm; C-Achse (Spindel) Auflösung 0,001°; Schwenkwinkel -225° bis +70°; Auflösung 0,0001 mm. Anschluss 50 Hz, 3x 400 V; Maschinengewicht ca. 8500 kg; Abmessungen L 2650 x B 2400 x H 3200 mm. Ausgestattet mit Lade- und Entlade-Roboter sowie Feuerlöschanlage. Entwickelt für enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Year of construction 1998 Staple Stitching Machine 2 staple heads electr. Drive electr. Footswitch Delivery date: immediately from stock

Thermo Scientific Multiskan GO UV/VIS 200 to 1000nm Microplate Spectrophotometer The Thermo Scientific Multiskan GO Microplate Spectrophotometer enables photometric research applications such as DNA, RNA, and protein analysis. Wavelength selection: monochromator Light source: xenon flash lamp Wavelength range 200 to 1000 nm in 1 nm steps Reading scale up to 4 Abs Bandwidth < 2.5 nm Linearity at 450 nm: microplate 0 - 2.5 Abs, 2% (96-well plate) / Cuvette 0 - 2.5 Abs, 2% Accuracy at 450 nm: microplate and bowl 1.0% + 0.003 Abs (0 - 2.0 Abs) and 2.0% (2.0 - 2.5 Abs) Repeatability at 450 nm: SD microplate < 0.003 Abs or CV < 0.5% (Precision mode) and SD < 0.003 Abs or CV < 1.0% (Fast mode) / SD cup < 0.003 Abs or CV < 0.5% Compatibility: microplate: 96 or 384 wells / bowl H x W x D = 40-58 x 12.5 x 12.5 mm Linear Agitation Spectral scan rate 10 s from 200 to 1000 nm in 1 nm  ...

Dough divider / head machine KÖNIG, type: Mini Rex Multi AB -Very good condition- - Head machine / dough divider: KÖNIG Mini Rex Multi - Incl. 4 stamp strips - 3 stamping bars for dividing and rounding: 20 - 40g, 40 - 90g, 80 - 150g - 1 stamp bar for dividing but not rounding: 60 - 90g - 8 - 330g possible with stamp bars 1 - 3 rows - Computer control - Very good condition, everything technically checked - Ready for immediate use Visits and test runs are possible by arrangement.

Container divider suitable for PET and cartons

Faymonville STZ-4AU Multimax, - Year of construction: 2006, - Axes steered, - Extendable, - with divided hydr. ramps, - Radmulde, - Self weight: 13.940 kg, - Payload: 53.860 kg, - Total weight: 67,800 Kg

Height=1.62 m, Overall length= 0.8 m, Overall width= 1.29 m, Net weight= 324 kg,

CNC Portal Flame Cutting Machine Manufacturer: Messer Type: MultiTherm Eco 3600 Year of Make: 2021 CNC Control: Global Control Track width: 3,600 mm Work tables: 2,300 x 6,200 mm 4 oxy-fuel burners type ALFA MS 4452/250 Cutting thickness: max. 150mm Bevel cutting possible Automatic gas adjustment (OmniFlow) for cutting oxygen (max. 15bar) Extraction system: Keller dry separator type Vario 2 Software: OmniWin2021

General SKU291Y469 LocationBarneveld MakeIKA Werke Main Features MaterialStainless steel Specified Features - Stirrer Stirrercheck Homogenising stirrercheck Motorcheck Mounted on supportcheck Adjustable heightcheck MaterialStainless steel General Typemultiple types Mounted on framecheck Extra information 1. IKA-Werke, no type plate, homogenizer head: dia. 23 mm × 8.5 mm, mixing shaft length: 300 mm, with stand. 2. IKA-Werke, type: TP 19/10, motor: 2000 rpm, 170 W, 220 V, homogenizer head: dia. 13 mm × 8 mm, mixing shaft length: 270 mm, with stand. 3. IKA-Werke, type: RW 43, motor: 25–700 rpm, 220 V, with drill head, max. dia. 10 mm, no stand. 4. IKA-Werke, type: RW 20, motor: 220 V, 60–500 rpm / 240–2000 rpm, with drill head, max. dia. 10 mm, with stand, max. height: 750 mm. 5. IKA-Werke, type: RM 18, motor: 25 W, 220 V, 25–250 / 200–2000 rpm, with drill hea ...

General SKU291Y819 MakeIKA Werke Mounted on framecheck Main Features MaterialStainless steel Specified Features - Stirrer Stirrercheck Homogenising stirrercheck Mounted on supportcheck Adjustable heightcheck MaterialStainless steel General LocationBarneveld Weight150 kg Extra information 1. IKA-Werke, type: T 45, motor: 600 W, 220 V, 10,000 rpm, homogenizer head: dia. 40 mm and 20 × 11 mm in one, mixing shaft length: 300 mm, with stand.2. IKA-Werke, type: T 8.10, motor: 12–18 V, 100 W, 5000–25,000 rpm, homogenizer head: dia. 6 × 6 mm, mixing shaft length: 120 mm, with stand.3. IKA-Werke, type: TP 18/10, 170 W, 220 V, 20,000 rpm, no stand. IKA pick-up for stirrer.4. IKA-Werke, type: TP 18/10, 170 W, 220 V, 20,000 rpm, IKA pick-up for stirrer, with stand, max. height: 650 mm.5. IKA-Werke, type: RW 42, 600 W, 220 V, 50–1400 rpm, with drill head, max. dia. 10 mm, no  ...

Manufacturer: Multiplas Year of manufacture: 2023 Model: V2C-50T Type of machine: Injection Molding Machine Technical Details - Screw diameter: 35 mm - Theoretical injection volume: 154 cm3 - Injection capacity (PVC): 145 gm - Injection pressure: 1383 kg/cm2 - Injection rate: 69 cm3/sec - Plasticizing capacity (PVC): 53 kg/hr - Screw rotation speed: 186 rpm - Heater capacity: 3.9 kw - Clamping force: 55 ton - Min. mold thickness: 350 mm - Opening stroke: 300 mm - Max. opening thickness: 650 mm - Ejector stroke: 90 mm - Ejector power: 1.8 ton - Electric power: 10/7.5 hp/kw - Oil tank capacity: 160 L - Cooling water capacity: 230 l/hr - Machine size (L.W.H.): 2.3 x 1.5 x 3.7 m - Machine weight: 3.4 ton - Operating hours: approximately 420 - Extras: Material hopper included - Mould not included, Find more here - .ucymachines/ Contact us at - sales@ucymachines

Four CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 3) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 4) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible.

Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The machine is equipped with 2 format sets: 200 and 250 gram, 100 x 55 x ± 40 mm and 100 x 75 x ± 35 mm, both bottom folded. The butter is feed with direct connection with compensator. Aluminium dosing station. Automatic greasing system. The machine is fully rebuild / reconditioned by Benhil - Germany in 2006 and has stainless steel and polycarbonate covers around the machine, with CE logo on the side., Excluding:, - Outfeed conveyor, Type of Machine: Butter packaging machine , Capacity: ± 1.000 Kg/h, Capacity (Units): up to 80 packages per minute, Packaging Weight: 200 and 250 gram, Brick size: 100 x 55 x ± 40 mm and 100 x 75 x ± 37 mm, Packaging type: Bottom folded, Year of refurbishing: 2006, Motor power: 3 kW, Weight: 2.160 kg

Polin Multidrop Junior multipurpose depositor Stainless, suitable for production of a range of products inc biscuits, cookies, shortbreads, fingers, puffs and many more, max tray dimensions 700mm L x 460mm W, hopper capacity 35l, with five different biscuit moulds and spare wire cutting heads, 3Ph

Slaan: - 29 x 15 mm - 34 x 12 mm - 20 x 20 mm - 57 x 8 mm Scheren: - 230 x 20 mm - 375 x 10 mm Hoeksnijden: - 90°: 130 x 13 mm - 45°: 75 x 10 mm Doorsnede snijden: - rond: 45 mm - vierkant: 45 mm - C amp; I profiel: 127 mm Inkepingen: - rechthoekig: 45 x 100 mm Punching pressure: 60 ton Max sheet thickness by punching + nibbling: dia 29 x 15 / dia 57 x 8 mm Max punching dia: dia 160 mm Power needed: 5,5 kW Length: 1640 mm Depth: 710 mm Height: 1780 mm Weight: 1570 kg