multi spindle lathe used for sale

Manual lathe EMCO EMCOMAT EM20D Control: None, but digital position display Working range: Center width 1000mm X-axis: 220mm Z-axis: 110mm Quill Stroke: 120mm(Cone MK3) Main drive: 5kW Passage: 52mm Chuck flange: ISO 702-2 No. 5 / Size 5 (DIN 55029) Lining: Schunk - Rota-G 200-62 D5-GBK(NEW) Auction-ID: A1-51071-4

USED FAMAR ERGO 250 CNC lathe Serial No.: 20.68 Year: 2001 Machinable part Diameter: 200mm Max. length on turret: 125 mm Max. tool block length: 200 mm Axles Axis strokes: X: 340 - Z: 215 mm Fast feeds: X: 60 - Z: 30 m/min Ball screw diameter: 40 mm Spindle Spindle nose: 6\" Spindle power S6: 30 kW Speed: 6000 rpm Max centering diameter: 350 mm Equipped with 1 CN SIEMENS SINUMERIK 1 Chip conveyor Dimensions and weight Machine: 2460x1950xH2680mm - conveyor: 4000x1400mm - Total weight: 7000 kg + 7 pallets Auction-ID: A1-50950-13

USED CAZENEUVE HBX 360 MECHANICAL LATHE Distance Between Tip: 750 mm Height Between Tip: 180 mm ∅ Spindle Passage: 42 mm ∅ Above Bed: 400 mm ∅ Above Slide: 200 mm Bed Width: 330 mm Cross Slide Travel: 180 mm ∅ Duct Width: 60 mm Sleeve Travel 140 mm Spindle Cone: CM5 Tailstock Cone: CM4 Spindle Power: 5.2 kW Spindle Speed: 50 to 3000 RPM Equipped with 1 Heidenhain 2-axis Multifix Turret 1 Heidenhain 3-jaw chuck ∅ 200 mm 1 Tailstock chuck 1 Capstan counterpoint Auction-ID: A1-50950-85

USED HARDINGE CONQUEST 42 CNC lathe Bar diameter: 42 mm Diameter above the bed: 269 mm Diameter above the carriage: 180 mm Distance between tip: 350 mm 1 Main spindle with C axis Spindle speed: 50 to 5000 RPM Stroke: X 135 mm - Z 353 mm 1 Turret / 12 stations Equipped with 1 FANUC O-TC CN 1 Programmable counter point 1 Chip conveyor 1 LNS 6/42 hydraulic tubeMachine dimensions and weight : 3200x1500xH1600mm - weight 3200kg - LNS6/42: 4800x800xH1400mm - weight 700kg Auction-ID: A1-50950-23

USED CITIZEN M32 CNC lathe Bar diameter: 32 mm Max. turning length: 320 mm Spindle power: 3.7 / 5.5 kW Spindle speed: 10,000 rpm Turret: 20 stations with Y-axis Machine weight approx.: 3200 KG Equipped with 1 CN MITSUBISHI MELDAS 1 Lubrication pump tank 1 Fire suppression system 1 Hydrofluid HP pump unit Dimensions and weight Machine: 4000x2000xH1800mm - Weight 3500kg + 1 pallet 600x600 Weight 200kg + 1 Pallet 1200x1200mm Weight 250kg Auction-ID: A1-50950-9

USED CITIZEN M16V CNC LATHE Year: 2007 Bar diameter: 16 mm Max. turning length: 320 mm Spindle power: 3.7 / 5.5 kW Spindle speed: 10,000 rpm Turret: 20 stations with Y-axis Equipped with 1 Mitsubishi Meldas CN 1 Lubrication pump tray 1 Fire suppression system 1 HP COOL BLASTER CB510 pump unit 1 Chip conveyor 1 IEMCA BOSS 332E/R 44LL bar feeder (4 meter bars) Dimensions and weight Machine: 4000x2000xH1800mm - weight 3500 kg - Bar feeder: 5000x800xH1400mm - weight 800kg + 1 pallet 600x600 weight 200 kg + 1 pallet 1200x1200mm weight 250kg Auction-ID: A1-50950-8

USED OKUMA LCC15 2S CNC LATHE Serial No.: 0311 Year: 12/1998 Main spindle Max diameter above bed: 200 mm Diameter above carriage: 320 mm Max turning diameter: 260 mm Spindle speed: 35-4200 rpm Chuck clamping Ø160mm - 3 jaws Turret 2 Turret / 8 stations Equipped with 1 CN OKUMA OSP 1 Chip conveyor Dimensions and weight 4400x2000xH2400mm - weight 5000 kg Auction-ID: A1-50950-63

USED CNC LATHE INDEX 170 M Serial No.: 24932 Spindle bore: 42 mm Max. diameter above the bed: 370 mm Distance between tips: 450 mm Longitudinal stroke of the carriage: 150 mm Stroke of the cross carriage: 400 mm Spindle speed: 4000 rpm Number of positions on the turret: 14 rotating tools Equipped with 1 FANUC series 21i-T CNC clamping on the main spindle1 Set of fixed and rotating tool holders 1 LNS HYDROBAR hydraulic tube Machine dimensions and weight : 3800x2200xH1800mm - weight4500kg - LNS tube: 4800x800xH1300mm - weight 500 kg Auction-ID: A1-50950-33

The auction includes: - Index V250 CNC Vertical Lathe with Control Cabinet - Knoll 320 Hinged Belt Conveyor - Knoll HF 100/530 coolant system - Knoll TF40-75/07 Centrifugal Pump - LTA II R/H Solid Extraction System All other devices visible in the pictures are not part of the auction. Auction-ID: A1-51071-2

USED HARDINGE GT-CE CNC LATHE Serial No.: GT-753-B Main spindle Bar diameter: 27 mm Diameter above bed: 300 mm Spindle nose: A2-4 Spindle power: 3.7 kW Spindle speed: 60-6000 rpm Axle travel: X=281 mm - Z=304 mm Equipped with 1 FANUC 18-T CNC Dimensions and weight 1800x1500xH1800mm - weight 2500kg Auction-ID: A1-50950-24

faceplate diameter: 2200 mm swing diameter: 2500 mm turning height: 1600 mm Control: Siemens 840 D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC Double-Column Vertical Turning Lathe In 2017, the machine was retrofitted by a specialized German company with a Siemens 840D CNC control system. It includes new drive and feed motors, as well as a new electrical cabinet. An inspection under power—with the machine running—is currently still possible. Equipment: Siemens 840D CNC control system Number of controlled axes: 4 linear axes and one C-axis for the faceplate Electronic handwheel Safety fencing 2 rams Left ram equipped with driven tool stations for drilling and milling Right ram for turning operations Faceplate with 4 clamping jaws Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC bar-fed lathe, year 2005, CNC MSX 850. Used machine. More info & price on IndustrialBuyer.

sliding headstock CNC lathe, year 2000, CNC 18i T. Used machine. More info & price on IndustrialBuyer.

CNC bar-fed lathe, year 1998, CNC MSD-501II. Used machine. More info & price on IndustrialBuyer.

sliding headstock CNC lathe, year 2000, CNC LH1. Used machine. More info & price on IndustrialBuyer.

\"CAPACITY : . Maximum rotating diameter 380 mm . Maximum turning diameter 250 mm . Maximum turning length 200 mm . Spindle centre distance 500 mm SPINDLE : Spindle nose asa 6 . Self-centering diameter 210-250 mm . Front bearing inner diameter 100 mm . Spindle rotation speed rpm 4000-6000 . Spindle motor power S1 kw 9 . Spindle motor power S2 kw 11 . Maximum torque Nm 210 WAGON : . Useful travel X axis mm 150 . Useful travel Z axis mm 240 . Encoder X/Z-axis transducer . Ball screw diameter X/Z mm 32 . Fast travel speed X/Z axis m/min 30 TOWER . Number of 8x2 stations . VDI 30 tool holder . External tool section 20x20 mm . Diameter of boring bar holder 32 mm . Turret indexing time sec 0.10 . Power of driven tools kw 3.7 . Maximum torque of driven tools Nm 30 NUMERICAL CONTROL : GE FANUC series 18i-T \" Auction-ID: A7-50976-4

\"GENERALI Supply voltage 380V 3 - ‡ 5% 50 Hz Installed power kW15 Hydraulic working pressure bar 70 C.N.C. 8 simultaneous axes (Expandable up to 16) Display Color Operating temperature +5 / +40 degrees Vector Motorization Axis position detection By optical scale Refrigeration flow rate lt/m 50 Tank capacity 150 lt MAX. BAR DIMENSIONS Round, diameter 60 mm Hexagon, key mm 52 Square, side 42 mm MAX. THREAD DIAMETER Taps and dies aluminium brass M 42 Taps and dies mild steel M 30 Snap-on die or rolling head According to die capabilities Finger thread mm 60 DIMENSIONS AND WEIGHTS Occupied area mm 2620x1300 Height 2450 mm Net weight (approx.) kg 2800 Packaging dimensions mm 2800x1500x2500 Box volume 7.5 m³ SPINDLE Motor power (Vector) KW 12 Speed range rpm 25-3000 Transmission motor coupling A by means of toothed belt TURRET SLIDE Rapid speed mm/1' 10000 Maximum turret carriage stroke mm  ...

\"X\" axis travel: 220 mm \"Z\" axis travel: 410 mm Turning diameter above the transverse carriage:350 mm Spindle motor power: 15 kW Feather line: 500 mm Spindle bore: 51 mm Spindle nose: 6 Max. spindle speed: 4000 rpm Min. Spindle Speed: 25 rpm\" Auction-ID: A7-50976-3

Maximum bar diameter 75 mm Maximum spindle speed Rpm 3000 Vector motor power Kw 12 Maximum torque Nm 230 Maximum turret stroke 180 mm Maximum distance between turret and clampmm 290 Minimum distance between turret and gripper mm 110 Tool holes Nr 6 Diam. Of turret holes mm 31.75 Rapid slide speed m/min 10 Maximum thrust force daN 1200 Gearbox speed (indexing) sec 0.3'' Tool detachment mm 0.2 Slide X1,X2, X3,X4 nr 4 Maximum stroke 70 mm Quick speed m/min 10 Maximum force daN 1200 Slide Z2 Nr 1 Maximum stroke Z2 mm 120 Rapid speed Z2 m/min 10 Maximum force Z2 daN 1200 Hydraulics with C.N.C. management Max bar 35 Pliers system in use Din 6343 C.N.C. numerical control Axes 8 Installed power Kw 18 Working pressure Bar 70 Refrigeration flow rate Lt/m 50 Tank capacity Lt 200\" Auction-ID: A7-50976-1

Auction-ID: A7-50976-2

turning diameter:1600 mm turning length:12000 mm control:FAGOR 8050 Used CNC Lathe with FAGOR 8050 and extensive accessories. For further technical data and accessories, pls browse the Appendix. Parallellathe WMW mod. 4 GUIDE-WAYS ¦ CNC: FAGOR 8050 ¦ bed: monolithic ¦ centres height: 800 mm ¦ centres distance: 12000 mm ¦ swing over cross-slide: 1250 mm ¦ turret: automatic 4 positions ¦ tailstock: motorized ¦ tailstock connection: hydraulic ¦ platform: diam. 1000 mm ¦ steady rests: nr.02 ¦ chip conveyor Warranty: none Take advantage of the favorable leasing and hire-purchase terms from IKB Leasing. Ask us about it.

faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

turning diameter over bed:2600 mm turning diameter over slide rest:2200 mm turning length:5000 mm faceplate:2050 mm number of spindle speeds:0,7 - 70 rpm total power requirement:ca. 22 kw Height of centres: 1350 mm Distance between centres: 5000 mm Swing over cross slide: 2600 mm Spindle power: 30 HP Spindle speed: 0,7 - 70 rpm Longitudinal swift Control on the carriage Chuck: diam. 2050 mm

turning diameter:570 mm turning length:1000 mm dimensions of the machine ca.:3,25 x 2,03 x 1,95 m Tool disc turret for 8 tools with VDI 30. Not for power tools machine manual, technical documentation; Accessories: 3-jaw chuck, various tool holders Video is available

faceplate diameter:800 mm power requirement:110 kW weight of the machine ca.:37.000 / total 52.000 t transport measurements machine:5,07 x 2,98 x 3,90 m clamping diameter:800 mm :Ø 800 x 720 mm Tool bore:Capto C6 tools in tool magazin:2 x 80 With C-Axis

faceplate diameter:1600 mm power requirement:80 kW weight of the machine ca.:25 t dimensions of the machine ca.:4,4 x 4,62 m max. workpiece diameter:2000 mm max. diameter of face turning:1800 mm tool taper:ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis

turning diameter:270 -300 mm turning length:710 mm total power requirement:43 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:3,16 x 2,15 x 2,15 m The machine does not include a chuck or tools ? the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one.

turning diameter:220 mm turning length:310 mm total power requirement:17 kW weight of the machine ca.:3,3 t dimensions of the machine ca.:2,25 x 1,63 x 1940 m greates pass round over bed:430 mm bore diameter:45 mm centre distance:687 mm slide travel radial ( X-axis ):160 mm slide travel axial ( Z-axis ):310 mm spindle turning speed range:0-6.300 U/min

turning diameter:220 mm turning length:700 / 665 mm total power requirement:17 kW weight of the machine ca.:2,6 t dimensions of the machine ca.:2,63 x 1,98 x 1,94 m greates pass round over bed:430 mm Part length max.:510 slide travel radial ( X-axis ):160 mm bore diameter:45 mm Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

turning diameter over bed:350 mm turning diameter over slide rest:240 mm turning length:800 mm Spindle RPM:40 - 2000 in 8 Stufen 1/min total power requirement:3 kW Spindle bore:26 mm tailstock quill taper MT:MK 2 dimensions of the machine ca.:1,5 x 1,0 x 1,6 m weight of the machine ca.:1,9 t Very well maintened center lathe with accessories - 3-jaw, 4-jaw chuck - tailstock with center - 1 boring head - RAPID quick tool change device with 3 holder - saddle mounted steady rest - collant device - set of collets appr. 75% size B 32

turning diameter over bed:500 mm turning diameter over slide rest:310 mm turning length:1500 mm spindle turning speed range:7 - 710 U/min feed range:5,6 - 224 mm/min total power requirement:15 kW weight of the machine ca.:3,7 t dimensions of the machine ca.:2,9 x 1,4 x 1,6 m Machine with 2-axis digital readout - MULTIFIX quick tool change device - 3-jaw chuck

turning diameter over bed:1000 mm turning diameter over slide rest:750 mm turning length:3000 mm weight of the machine ca.:12 t dimensions of the machine ca.:6x2,5x1,8 m spindle bore:110 mm turning speed range:900 U/min Year:1986 Equipment: - Coolant device - 1 static steady rest - 1 rotating steady rest - Faceplate 1.000 mm - Digital display - Rapid traverse

faceplate diameter:1400 mm swing diameter:2000 mm turning height:1500 mm main drive:80 kW faceplate speeds from - to:1 - 365 U/min milling motor:37 kW ram head dimension:240 x 240 mm max. ram stroke:1250 mm total power requirement:133 kVA weight of the machine ca.:50 t dimensions of the machine ca.:11 x 5 x 6,4 m Machine was overhauled in 2008 by OEM New control CNC SIEMENS 840 D automatic tool changer 72-pcs C-axis with driven tools Angle-, straight tool holders with CAPTO holder Coolant device Chipconveyour

turning diameter:145 mm turning length:210 mm total power requirement:40 kW swing diameter:145 mm Spindle bore sp. 1:56 mm Spindle bore sp. 2:56 mm swing diameter over face slide:145 mm greates pass round over bed:145 mm RPM Main Spindle:7.000 1/min number of workpiece supports:12 Shank diameter:25 mm C-axis RPM:2.000 1/min Chuck diameter spindle 1:140 mm Chuck diameter Spindle 2:140 mm Number of tools:12 fach St. Tool bore:VDI 25 Shank diameter:25 mm weight of the machine ca.:5.300 kg dimensions of the machine ca.:5.000 x 4.100 x 2.050 mm Slide path flat: X1, X2, X3: 220mm, 120mm ( 145mm ) Longitudinal slide travel: Z1, Z2, Z3: 320mm, 345mm, 380mm Vertical slide travel Y1: +/- 30mm Longitudinal spindle travel Z3: 380mm Clamping tube inner draw tube 46mm diameter Speed range main drive 1+2 up to 7,000 rpm Speed of driven tools up to 6,000 rpm Main and counter spindle collet chuck 1 axial ...

turning diameter:570 mm turning length:- mm control:- Diameter of rotation above the bed slide:360 mm Maximum width:2.000 mm revolutions per minute:max. 2500 U/min :11 kW max. longitudinal feed:7,5 m/min max. transverse feed:7,5 m/min rapid traverse longitudinal:12 m/min rapid traverse cross:15 m/min Pinole diameter:95 mm Pinolenhub:220 mm Pinolen intake: MK 5 weight of the machine ca.:2,97 t dimensions of the machine ca.:3,8m x 1,3m x 2m m Technical description: - Tool turret - automatic - 8-fold (see also options) - CAPTO Revolver Disc - Machine bed - made of perlite casting GG-26 - high stiffness due to strong ribbing - Bed slides - guideways hardened and ground - automatic lubrication of the bed rail - Reitstock - manual - Quick clamp - Operator station - two movable handwheels on the operator panel - a movable handwheel - Control - "Siemens 828 D" CNC control - Siemens "Comfort" (in ...

turning diameter:500 mm turning length:1500 mm Technical Specifications: ·Turning diameter over cross slide: 290 mm ·Spindle bore: 71 mm ·Speed range: 3?2,800 rpm ·Rapid traverse speed: 10 / 5 m/min ·Feed rate: 1?2,000 mm/min ·Total power requirement: 22 kW ·Machine weight: approx. 3.2 t ·Space requirement: approx. 3.0 × 1.6 × 2.0 m

turning diameter:356 mm turning length:700 mm y-axis:±60 mm spindle drive:18 kW counterspindle motor:15 kW Direct drive for driven tools:5,5 kW Motor starting torque:640 Nm Main spindle mount:A2-8 counter spindle mount:A2-6 Rod passage:80 mm main spindle speeds::4.000 U/min Drehzahl angetriebene Werkzeuge :6.000 U/min rapid traverse speed:30 m/min auf X- und Z-Achse machine weight ab.:5.800 kg 12-station turret, all positions driven C-axis on both spindles Belt-driven and infinitely variable drive on all motors Prismatic guideways on all axes Oil cooler for both spindles, manufacturer Daikin Automatic, dialog-guided programming system MAPPS Automatic monitoring of tool load and tool wear Two Renishaw measuring arms for automatic tool measurement Interfaces: USB, PCMCIA card, and RS-232 port Interface for bar feeder Automatic parts catcher Dual foot pedal for independent opening and clos ...

turning diameter:570 mm turning length:635 mm travel -x axis:220 mm travel -z axis:635 mm Torque:240 Nm feed::X: 20m/min; T: 24m/min disc turret:12 fach with live tooling:6 fach main spindle speeds::25-25.000 dimensions of the machine ca.:3210 x 1750 x 1750 mm weight of the machine ca.:5.300 t swing diameter max. over bed cover:570 mm spindle bore:79 mm chuck diameter:200/250 mm rapid power traverse in X-and Z direction:20/24 m/min numbers of tools:12 C-axis

turning diameter:1070 mm turning length:8500 mm total power requirement:62 kW turning diameter over slide rest:800 mm spindle bore:128 mm max. workpiece weight between centers:8000 kg max. workpiece weight:12000 kg bore spindle turning speed range:1,120-01120 U/min tailstock quill diameter:200 mm dimensions of the machine ca.:12 x 2,8 x 2,4 m Machine equiped with Alan Bradley 9 series CNC control - SAUTER 6-postiion revolving head - 360 mm seld centering steady rest - 385 mm rotary work rest (used for gun barrels) - faceplate 800 mm - chip conveyor

turning diameter:830 mm turning length:4.000 mm turning diameter over bed slide:540 spindle bore:130 mm turning speed range:2 - 1.600 U/min rapid speed:4/5 m/min feed speeds:1 - 2.000 mm/min total power requirement:55 kW dimensions of the machine ca.:7 x 2,2 x 2 m weight of the machine ca.:7,5 t

turning diameter:1600 mm turning length:6200 mm spindle bore:130 mm turning speed range:5 - 710 U/min turning diameter over bed slide:1250 total power requirement:37/52 kW weight of the machine ca.:16 t dimensions of the machine ca.:12 x 4 x 2 m CNC SIEMENS Sinumerik 3-jaw chuck SCHUNK Rota Plus, diameter 630 mm 3 x fixed liners (1200 / 570 / 400 mm) Coolant system and chip conveyor Miscellaneous accessories

turning diameter:500 mm turning length:1000 mm control:MANUAL PLUS Grundig total power requirement:24 kVA weight of the machine ca.:2650 kg dimensions of the machine ca.:2500 x 1750 x 1850 mm swing diameter over face slide:290 mm chuck:Ø max. 260 mm cross movement:260 mm spindle head:DIN 55027 Größe 8 spindle bore diameter:70 mm rapid travel - longitudinal/face:8 /6 m/min spindle speeds::8 - 2800 tailstock travel:180 mm tailstock quill taper MT:5 Documents:vorhanden

turning diameter over bed:240 mm turning length:450 mm total power requirement:0,5 kW weight of the machine ca.:120 kg dimensions of the machine ca.:1500 x 600 x 1200 mm centre height:120 mm spindle bore:21 mm revolutions per minute: 75 - 2980 U/min

turning diameter:480 mm turning length:1250 mm control:H 645 weight of the machine ca.:8 t dimensions of the machine ca.:5 x 2 x 2 m centre distance:1580 mm swing over bed:495 mm swing diameter:üb.Querschlitten ca.350 mm working area:1600 mm control:H645 connected load:50 kW

control: Numeriksteuerung CNC 700 K total power requirement:28 KVA weight of the machine ca.:7,8 t dimensions of the machine ca.:6610 x 2280 x 2235 mm work height max.:1060 mm greates pass round over bed:305 mm spindle bore:82 mm Documents:vorhanden

turning length:630 mm total power requirement:16 kW weight of the machine ca.:5 t dimensions of the machine ca.:3400 x 1500 x 1600 mm swing diameter over slide rest:Hinterdrehschlitten 250 mm centre height:über Hinterdrehschlitten 150 mm center height over bed:300 mm turning spindle:Kopf DIN 55021 Gr. 8 centre distance:1000 mm accessories::2 Schränke Wechselräder

turning diameter:500 mm turning length:1000 mm control:MANUAL PLUS Grundig total power requirement:24 kVA weight of the machine ca.:2650 kg dimensions of the machine ca.:2500 x 1750 x 1850 mm swing diameter over face slide:290 mm chuck:Ø max. 260 mm cross movement:260 mm spindle head:DIN 55027 Größe 8 spindle bore diameter:70 mm rapid travel - longitudinal/face:8 /6 m/min spindle speeds::8 - 2800 tailstock travel:180 mm tailstock quill taper MT:5

turning length:2000 mm control:- total power requirement:25 kW weight of the machine ca.:3 t dimensions of the machine ca.:3800 x 1800 x 1850 mm swing over bed:500 mm swing diameter over face slide:280 mm control:Zyklen-Steuerung Heidenhain bed width:350 mm Documents:vorhanden

faceplate diameter:1800 mm swing diameter:2000 mm turning height:1170 mm z-axis:1000 mm cross rail adjustment - vertical:800 mm faceplate speeds::2,5 - 280 workpiece weight:12 t feeds:1 - 6000 mm/min max. torque on the faceplate:50000 Nm total power requirement:85 kW weight of the machine ca.:41 t dimensions of the machine ca.:5,6 x 4,8 x 4,6 m Machine retrofit and overhould in 2005 with SIEMENS 840 D powerline control - 6 jaw hydraulic power chuck - tool changer for 12 tools - chip conveyor, coolant attachment, splash housing - various tool holders

faceplate diameter:1000 mm swing diameter:1600 mm turning height:1200 mm main drive:75 kW faceplate speeds from - to:7 - 800 U/min milling motor:25 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:800 mm ram head dimension:240 x 240 mm weight of the machine ca.:40 to dimensions of the machine ca.:9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor