136,811 used machines on RESALE, but how to find them? Machine Search
General Description Heavy-duty faceplate lathe manufactured by HEYLIGENSTAEDT , Germany. Designed for precision turning, facing and boring of large rings, discs, shafts and other oversized workpieces exceeding the capacity of conventional engine lathes. The machine is equipped with a large faceplate, heavy carriage and has been modernized with a Schneider Electric variable frequency drive. Technical Details Manufacturer: HEYLIGENSTAEDT Model: Not identified Machine type: Heavy-duty faceplate lathe Year: Not confirmed Large faceplate: Approx. 2,500 mm diameter Conventional manual control Mechanical variable-speed drive: P.I.V. Antrieb Werner Reimers K.G., Variant MRHC 23 Gear No.: 29946061 Oil capacity (P.I.V. drive): Approx. 5.5 L Variable frequency drive: Schneider Electric Altivar 630 (ATV630D11N4), 11 kW Original German spindle speed and feed charts Condition Good ...
WEIBERT WJ-1200 Lathe Distance between centers 1200mm Center height 215mm Spindle thread M33 Spindle speeds 500/1000/2000/2800 Motor output power 1.5KW Face plate Hand rest concurrent grain tip 400V and 230V G&WJ-1200 Net price 1639,-€ with VAT 1950,-€ Option: spindle speeds infinitely variable net 790,-€
SPINNER TTC 300- 52 SMMCY CNC Lathe YOM 2012 Twin-opposed-spindle, twin-turret lathe Control FANUC 31iT Swing diameter 400 mm Max. turning dia ~200-250 mm Max. turning length 400 mm Travels: X1 180 mm, X2 110 mm, Z 450 mm, Y +40/-40 mm Rapid traverse: X1 15 m/min, X2 15 m/min, Z 24 m/min, Y 15 m/min With C-axis Main Spindle 1: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Spindle bore 52 mm Spindle speed 0-5000 rpm/ 19 kW Performance Pmax 23,5 kW Torque 150 Nm Spindle nose A6/DIN Sub-Spindle 2: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Can be moved on a slide to take over spindle 1 Spindle speed 0-7000 rpm/ 8 kW Performance Pmax 13,8 kW Torque 189 Nm Spindle nose 100 mm Turret 1: At the top of the ...
Thread-cutting gears, number of teeth: 30, 57, 60, 105, 120, 127, equipment: lead screw for thread cutting, separate feed system, automatic longitudinal and cross feed, change gear for feed and thread gearbox, back gear in the headstock, three-jaw chuck, cross slide and compound slide, four-way tool post, tailstock, an on-site inspection is possible.
Parallel Lathe GEMA LZ 160 Between points: 1000 mm Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T
Face plate diameter: 1.250mm Center height above foundation slab: 1,250mm Weight: 19t Power: 55Kw Max. torque on the face plate: 31,500Nm Maximum workpiece mass between centres: 16,000 kg Speed range: 2.24 – 224 rpm
DBK 1300 Lathe Center height above machine bed: 220 mm Distance between centers: 1300 mm Center height over palm rest support: 160 mm Spindle speed: 0 to 3000 rpm Headstock, thread holder: M33 Tailstock Morse cone mount: MK2 Pinolenweg/tail spindle travel: 100 mm Motor power S1 (100%) / S6: 1.1kW/1.5kW Mains voltage: 230 V or 400 V Net weight: 160 kg G&HM-DBK1300
A center lathe with 2-axis digital readout is offered. Tool holder, coolant supply and transparent guard. Inspection possible by prior arrangement.
A CNC lathe is offered. Equipped with three-jaw chuck, tool turret and hydraulic unit. Control: TRAUB SYSTEM TX 8. Inspection possible by prior arrangement.
A lathe with CNC control is offered. Equipped with three-jaw chuck, tailstock, tool holder, cutting fluid supply and machine enclosure. Control: HEIDENHAIN. Inspection possible by prior arrangement.
A CNC lathe with bar feeder is offered. Equipped with an IRCO Breuning PROFImat bar feeder and KNOLL 400 S - 1/200 chip conveyor. Control: INDEX C200-4D / Siemens SINUMERIK 840C. Condition: in need of repair, maintenance required. Hoses and guide channels of the bar feeder are defective. The emergency stop currently cannot be reset. The oil pressure/air pressure switch trips the circuit breaker. Inspection possible by appointment.
A compact CNC lathe is offered. Control: Siemens. Condition: defective. Turret enable signal is missing. Inspection possible by appointment.
INDEX - V 300 Y/B Stock number 1039-9419 Country of origin Germany - incl. 24 pos. Pallet circulation system Schnaithmann - Incl. ball screw as spare part - Incl. 39x driven tools - Incl. 39x tool holders Technical details: Circumferential diameter max. 450 mm Chuck diameter 400 mm Control Siemens 840D (Index) Main spindle: Max. speed 4,200 min/-1 Drive power - main spindle ( 35.5 / 56 ) kW Max. torque ( 340 / 550 ) Nm C-axis 0.001 ° Tool turret: Number of tool positions 2x 12 pos powered stations 2x 12 pos VDI 30 tool system Max. speed of the applied Tools 6,000 rpm. Drive power - operated. Tools 9.5 kW Max. torque 40%: 19 Nm Y - axis +/- 90 mm B-axis +270° / -90° Travels: x-axis 730 mm z-axis 340 mm y-axis +/- 90 mm B-axis +270° / -90° Feeds: Rapid traverse X: 40 / Z: 30 m/min Pallet changer: Number of pallets 24 pos. Pallet s ...
General Description Heavy-duty conventional engine lathe of likely Soviet/Eastern European manufacture, designed for turning, facing, boring and threading large cylindrical workpieces. The machine is equipped with a geared headstock, large independent chuck, heavy-duty carriage and manual controls suitable for general machining applications. Technical Details Manufacturer: Not identified Model: Not identified Machine type: Heavy-duty conventional engine lathe Year: Not confirmed Power supply: 380 V, 3-phase, 50 Hz Rated current: 63 A Starting current: 756 A (electrical plate) Large 4-jaw independent chuck (approx. 700–900 mm) 4-way tool post Quick-change gearbox Leadscrew and feed rod Tailstock Electrical control cabinet Condition Used industrial condition. The machine appears mechanically complete with headstock, carriage, tailstock and electrical cabinet install ...
used
2022 TORNOS SWISS CNC SWISS-TYPE LATHE CNC: FANUC 31iB Maximum spindle speed: 10,000 rpm Bar capacity: up to 25.4 mm The TORNOS SWISS GT 26-6 is a compact, high-speed CNC turning center intended for precision production of small-diameter components. Its twin-spindle arrangement allows machining to be transferred between the main and counter spindle, reducing the number of separate operations required for many parts. The machine is equipped for both conventional Swiss-type work with a motorized guide bush and applications where machining without the guide bush is preferred. Machining Capacity Maximum material diameter: approximately 25.4 mm Typical part length with rotating guide bush: up to 220 mm Main spindle: 0–10,000 rpm Counter spindle: 0–10,000 rpm Main spindle power: 8.2 kW, up to 10.5 kW Counter spindle power: 8.2 kW, up to 10.5 kW Maximum torque ...
Offered for sale is a CNC lathe with tool turret. Technical specifications: Machine operating hours: approx. 20000h, main spindle bearings replaced at approx. 16000 machine operating hours. Control system: Heidenhain CNC control. Equipped with tool turret, tailstock, various clamping tools, tool holders, collets and additional tools as well as chip conveyor. Inspection possible by arrangement.
engine lathe, year 1999. Used machine. More info & price on IndustrialBuyer.
Colchester Student Drehmaschine Drehbank Lathe Hersteller: Colchester Type [ type]: Student Control unit: conventional Weight [weight]: approx. 1.000kg good, functional condition Absolute original condition from first ownership, from a German company - Various accessories according to photos • Solid cast iron construction for high stability • Versatile setting options for various machining processes • Powerful motor for demanding tasks • Colchester Student: known for quality, durability, reliability Viewing can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. If you have any questions or would like to see a viewing, please feel free to cont ...
engine lathe, year 2008, CNC 4802. Used machine. More info & price on IndustrialBuyer.
engine lathe, year 1996. Used machine. More info & price on IndustrialBuyer.
turning diameter:1390 mm turning length:14000 mm weight of the machine ca.:13 t More information can be found in the Appendix.
weight of the machine ca.:18 t centre distance:700 mm max. swing diameter:200 mm Lathe with 4 tools only for 3-cylinder crank shaft
turning diameter:360 mm turning length:520 mm total power requirement:20 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3 x 2 x 2 m
turning diameter:360 mm turning length:520 mm total power requirement:20 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3 x 2 x 2 m
turning length:400 mm total power requirement:45 kW weight of the machine ca.:4 t dimensions of the machine ca.:3,58 x 1,91 x 2,05 m spindle passage:45 mm
turning diameter:500 mm turning length:1000 mm weight of the machine ca.:7,3 t dimensions of the machine ca.:6,5 x 4,45 x 2,21 m
turning diameter over bed:100 mm turning diameter over slide rest:70 mm turning length:80 mm total power requirement:1,0 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,7 x 0,6 x 1,2 m facing lathe with manual feed, various accessories
turning diameter:500 mm turning diameter over bed:500 mm turning dia. over base-slide:290 mm centre distance:1000 mm centre height:250 mm z-travel:1350 mm speeds:10 - 3000 U/min
turning diameter:650 mm turning length:1.500 mm chucking diameter:400 mm Spindle diameter at the front bearing: 180 mm Spindle bore: 132 mm Max. speed: 1,800 rpm Fixed Lynette Operating hours: 38,500 Approx. spindle hours: 1/3 of operating hours
turning diameter over bed:340 mm turning diameter over slide rest:190 mm turning length:700 mm spindle bore:50 mm shaving-spindle speed range:40 - 3.000 U/min dimensions of the machine ca.:2 x 1 x 1,6 m total power requirement:6 kW weight of the machine ca.:1,2 t
turning length:800 mm total power requirement:380 V weight of the machine ca.:1400 kg dimensions of the machine ca.:2200 x 1200 x 1300 m centre height:160 mm chucking diameter:150 mm
turning diameter over slide rest:280 mm turning length:4000 mm total power requirement:7,8 kW weight of the machine ca.:6 t dimensions of the machine ca.:5,9 x 1,9 x 1,40 m
turning length:140 mm dimensions of the machine ca.:4 x 2 x 1,9 m
turning diameter over bed:340 mm turning diameter over slide rest:190 mm turning length:700 mm spindle bore:50 mm spindle turning speed range:40 - 3000 U/min total power requirement:6 kW weight of the machine ca.:1,0 t dimensions of the machine ca.:2 x 1 x 1,6 m
turning diameter over bed:930 mm turning diameter over slide rest:630 mm turning length:6000 mm turning dia. in gap:1250 mm spindle bore:95 mm turning speed range:8 - 800 U/min total power requirement:25 kW dimensions of the machine ca.:9 x 2 x 1,9 m faceplate 2 steadies coolant attachment taper turning attachment
turning diameter over bed:3800 mm turning diameter over slide rest:3200 mm turning length:12000 mm faceplate turning speed range -stepless-:2 - 200 U/min max. workpiece weight:90.000 kg bed width:4000 mm 2 steadies
Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Bar automat Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
turning diameter: 300 mm turning length: 2000 mm swing diameter over bed slide: 520 mm total power requirement: 7,5 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 4745 mm x 1340 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ref. -No.: 10374 Manufacturer: MONFORTS Year of construction: 2000 Type of control: Zyklen gesteuert Control: MONFORTS Control Storage location: Halberstadt Country of origin: Germany
maximum number of results exceeded
please refine your search
5.750 € 
