multi spindle lathe used for sale

Product number: 1794 Type: Multipack RC11-80 U Serial number: 04AF353 Year of construction: 2004 Capacity: max 80 packs/min .Glue unit: Nordson Problue 4 hot melt Power: 3 x 400V, 50Hz Dimensions: 7500 mm x 1550 mm x 2900 mm

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

Used and in good condition Koma Multi-deck KMD-4-240-1500 Z-profile freezer with 3x hand over of product. Effective belt width 2.380 mm and effective belt length 4 x 15.000 mm. Belt speed can vary between 0,07 m/min and 2,30 m/min. Belt drive motors 4x Flender drives and automation. 6x Evaporators from Goedhart LLK.p 187 M2 with a capacity of 27 kW at 25.000 m³/h per piece. Fans have a downblow of 45°C. This multi-deck comes with a complete installation. 6x Bitzer S6F-30.2Y-40P (x2) compressor set with liquid reciever, oil separator, filter, pressure safety switches and gauges. 6x Koma CAV L09 1x2A condensors with 2 fans. Installation complete with control panel with Somron sysdrive inverters. This tunnel freezer is currently assembled in our warehouse, ready for a viewing. 800 piece/h apple pie in 60 minutes ( 2200 grams/piece) +40ºC to -18ºC. Brand: Koma Type: Multi-Deck KM ...

MultiSorter is a standardized solution for the fully automatic feeding of unsorted components. The components are fed into the system, where they are separated and then forwarded to the robot. The robot picks the parts using the vision system that is fully integrated into the control system. System. The vision system guides the robot and ensures that components with incorrect placement are automatically returned. It can also monitor the quality of the components. The system ensures that the components do not overlap to the robot via the feeding mechanism. MultiSorter also has a built-in emptying function, which allows for quick and easy product changeover. The entire system is built on a transportable, stable steel frame in which everything is integrated and assembled. This enables fast and efficient installation and commissioning at the customer's site. The system can be combi ...

High-performance deep-drawing packaging machine from MULTIVAC - ALSO SUITABLE FOR HARD FOIL - Film width 420mm - With many extras - Double format (thus 2x speed)

Type: MUTIVAC R 530 Film type: flexible Bottom film width: 625 mm Top film width: 610 mm Cut-off length: 657 mm Pack sizes: 2.1 (2 pack.: 640 x 267 mm) Max.depth: 200 mm Vacuum pump: 250 m3/h Length: 8500 mm

The all-rounder combines outstanding workmanship with a wide range of work. Our machine also offers intuitive operation that optimizes your packaging processes. A high-quality material unwinder with double automatic roll centering ensures precise material guidance. In addition, our active material preference device ensures optimal web tension for flawless packaging results.  The extremely powerful brushless motors and the user-friendly color touchscreen control system give you maximum flexibility during format changes, greatly simplifying your packaging operations. The machine has memory slots for setting the machine parameters. Up to 50 different products can be stored. For this packaging line, we also offer fully and semi-automatic feeders, which we can also integrate for you at a later date. The machine is available in both directions and has a rotary cross seal with electroni ...

approx. 111 pieces Corlettes, Cordes and Koch, width 1.30 / 2m / 2.40m - used - : Prices per piece from location (net): Type 1 + 2 (2m wide): only 99.-€ Type 3 (1.30m wide): only 69.-€ Type 4 (1.30m wide): only 99.-€ For complete purchase (priority): 8.950.-€ (net) Manufacturer: Cordes und Koch Type: Corlette / Multi-Box Year of manufacture: unknown Foldable Not stackable Depth: 1.15m Type 1 – approx. 70 pieces Width: approx.: 2m, Height approx.: 1.80m Type 2 – approx. 32 pieces Width: approx.: 2m, Height approx.: 1.92m Type 3 – approx. 6 pieces Width: approx.: 1.30m, Height approx.: 1.80m Type 4 – approx. 3 pieces Width: approx.: 2.40m, Height approx.: 1.80m Condition: good, see photos Available: immediately Location: Nuremberg

Screwloader Meat Analyzer CFS Multitrack TS Type Conveyors / Screws / Elevators Height 2300 Width 1800 mm Length 3000 mm Voltage Electrical: 400V 50Hz 3N Installed Power 12 kw Main material Stainlees Steel Time of realisation 2-3 weeks Working belt dimentions 400 mm

I'm selling a Mazak Multiplex 6200 lathe-mill. It's in very good condition, still powered up. Inspections are available by appointment. The machine is highly efficient, with two spindles, two independent heads, and a milling capability (C-axis). It's equipped with a partition wall that automatically closes from the control panel. When the wall is closed, the machine can operate as two independent lathes. It can also operate as a standard lathe with a retractable handle. I can send videos and more detailed photos of the machine. Transportation and training are available. I also have other machines for sale. Technical Specifications 640 Control (Windows) Milling Two spindles Two independent tool heads Mazatrol 640T Control Year of Manufacture: 2000 Spindle speed: 0-5000 rpm Milling speed: 0-4500 rpm Turning diameter: 320 mm Turning length: 440 mm Number of tools: 2 x 1 ...

Slicer line with insert Suitable for slicing cooked ham in bread loaf and tunnel large form as well as 105 cal. Boiled sausage Knife: Multivac/VC, reserve, sickle, 23°/5°, z-toothed Line consisting of: - Slicer, manufacturer VC999, type SL600 Scale, 4-lane walk-through checkweigher with 4-lane rocker, manufacturer VC999, type CW404 scale, 4-lane walk-through checkweigher with 4-lane rocker Automatic inserter, 4-lane, for film widths from 420 - 620 mm, manufacturer VC999, type SB620 Description: SLICER SL600 Automatic central loading: - Ergonomic working heights allow easy manual product loading and line connection - 800 - 1000 mm loading height Servo anqetriebene production guide above and below: - Servo-driven product guide belts at the top and bottom ensure precise, even, pressure-free and gentle feeding of the products during cutting - Servo dri ...

Punching force: 45 t hole diameter in sheet thickness: Ø 27x13 mm : 24 /min L-beam 90°: 80x80x8 mm L-beam 45°: 60x60x6 mm flat steel: 200x13 mm : 7 mm engine output: 2,2 kW weight: 760 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 27 mm diameter - Rectangular notching device compl. with hold down - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 200 kN stroke length max.: 200 mm working feed: 10 mm/sec return speed: 20 mm/sec : 480x1060 mm work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 2,2 kW : 200x12 mm bending capacity max. - round: 48x4,0 mm weight: 500 kg Overall size: 1010x480x1120 mm Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm capacity 90 degrees: round: 110 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 200x60 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 140x60 mm total power requirement: 1,5 kW weight of the machine ca.: 130 t dimensions: 0,8 x 0,7 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MEP Multimatic SA8, year of construction 1995 Straightening and cutting system for reinforcing steel, fully automatic, complete functional system, immediately available Plant still in operation and can be demonstrated.

I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.

Multivac MR 335 tamper-evident labeller for the application of 2 self-adhesive tamper-evident seals on the closure points of formed cartons, 2 label dispenser model SUPER MR4000, label passage width max. 50 mm, label reel maximum diameter 360 mm, reel core diameter 76 mm, labelling speed up to 1.2 m/s, width of through conveyor 190 mm, speed of conveyor from 0.35 to 1.08 m/s, infeed/outfeed height approx. 820-920 mm, machine on wheels, electrical connection 230V/50Hz, 16A, maximum load 2.5 kW, compressed air 6 bar, machine floor space approx. 2738 x 1210 mm (WxD), machine height approx. 2300 mm, machine net weight approx. 700 kg

All types of conveyors according to the buyers specifications

Compressors, control, compressor control, control panel -Handover: in its current condition as inspected -Cover bottom: damaged, see photo -Manufacturer: Ecoair -Type: Multitronic Control -Dimensions: 280/295/H120 mm -Weight: 2.6 kg

Battery charging cabinet, battery, emergency power battery, emergency power battery, emergency power system, power supply system, lead battery -Manufacturer: multipower, 2 lead batteries mounted on the base plate. -Power: 12 V 7.2 Ah each -Dimensions: 200/200/H120 mm -Weight: 5.6 kg

Siemens Multix FD with the following system components: Generator Polydoros LX 30/50 Lite Tube Opti 150/30/50 HC 0,6/1,0_Baujahr 06/19 Vertical tripod Vertix FD 2x Detector Trixel Pixium 4600 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authorized by the manufacturer!

M. No.: 99051725 Format (cm): 35x45 Equipment / Additional information: Pockets: 2 Fold types: spiral fold, zigzag fold, double parallel fold, single fold Underfloor suction feeder: 30 000 bph Friction feeder: 20,000 sheets / h with parallel fold A4, 80 g / m2 Paper weight: 40 - 250 g / m2 with simple parallel fold Electrical connection values: Mains voltage: 230V Current consumption: max.IOA

Packaging machine - Flowpack Multi 30 horizontal packer Film width: 300mm Passage height: 40mm Packing speed: up to 120 pcs / min

Siemens Multix TOP ACSS with the following system components: Generator Polydoros IT 55 Tube Opti 150/40/80 HC 0.6/1.0_Bj. 2013 (ceiling hanging) Vertical tripod Vertix TOP • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the man ...

Multigraf MCM-48 creasing and perforating machine Specifications MCM-48: Manual of the material feed Minimum format, mm 80x100 Maximum format, mm 480x500 Material density, g/m2 80-500 Dimensions, mm: 1100 x 605 x 300 Power supply: 220 V

Siemens Multix TOP with the following system components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 C 0.6/1.0_Baujahr 2019 (ceiling hanging) Vertical tripod Vertix TOP • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the ...

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

Quick change tool holder, tool holder head, quick change tool holder -Quick change toolholder holder: without tension clamp -Manufacturer: Multifix -Size: D -with mounting for: mounting on the support -Dimensions: 278/250/263 mm -Weight: 33 kg

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of construction: 2008 Retrofit: 2019 Suction table: 2,000 x 3,000 mm 1 oxy-fuel burner ALFA 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC

Siemens X-ray system type Multix / Vertix Swing with generator POLYDOROS IT/S in good condition

Vacuum ejector, vacuum pump -Manufacturer: Piab, Multi-Ejector Vacuum Pump with Filter -Individual components: see photos -Overall dimensions: 375/210/H290 mm -Weight: 4 kg

Combi steamer 20 x 1/1 GN, 400 V, Eloma Multimax B20-11, 400 V, 45 kW, 60A, Fixed connection, Steaming, Combi steaming, Hot air, NT cooking, Core temperature, Manual steaming, Clima active, Energy saving, Reduced fan speed, Autoclean, Water shower, Dimensions 103x88x193 cm, Refurbished with warranty6300

TecHouse/Multigraf shed delivery tape 482.112; good condition; cleaned and tested; Length 1100mm; Width 340mm; sensor for automatic control; Speed adjustable; height adjustable. TecHouse/Multigraf stream delivery 482.112; good condition; cleaned and checked; Lenght 1100mm; width 340mm; sheet detection sensor for stop and go mode; adjustable in speed; adjustable in hight.

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Charger: for forklifts, type D 24/200 MULTI WF200 -Input voltage: 400 V 50 Hz -Power: 24 V/200 A -Dimensions: 555/520/H890 mm -Weight: 119 kg

Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: multicomp, axial fan type MCFS23092A/2092HBL.GN. Unused, original packaging. -Voltage: 220-240 V / 14.5 W -Number: 4x fans available -Price: per piece -Dimensions: 100/100/H35 mm -Weight: 0.3 kg

Multivac A300 Vacuum packer Serial: 6818 2004, stainless vac packer, 450mm sealing bar, 2.7Kw, mobile, 3Ph

axial fan, fan, extraction, fan wheel, fan blade, fan blades, blade fan impeller -Manufacturer: Multi Wing, wing fan impeller 4-blade fixed pitch -Diameter: 400 mm -Hole: Ø 19 x 40 mm -Quantity: 1x fan wheel available -Dimensions: Ø 400 x 75 mm -Weight: 0.7 kg

Touchline CF375 performs creasing and folding work in a single operation. The system has a simple control panel, a reliable Stacking feeder with suction belt system and a unique creasing and folding tool. Important: The transport rollers must be replaced.

Stapling machine nail Multinak S

Multipli with pheumatic bow feeder , compresser, double sheet control , 2 pockets

From September 2022 immediately available newly overhauled Multigrind HT retrofit machine prepared for resharpening hobs / worm gear cutters / pushers and cutting rotor Control: Siemens 840 D X - axis 650 mm Y - axis 400 mm Z - axis 280 mm A - axis (dividing apparatus) 360 ° SK50 C - axis (rotary table) 270 ° X3 - axle with tailstock Grinding spindle: HSK50 Dressing unit Tool changer: 10-fold magazine plate Coolant system: Turbo Separator Suction: LTA Extinguishing system Other accessories: Available ex works Software: Customer-specific delivery Financing / hire purchase possible.

Syspal Multipurpose lifter 2020, Stainless, mobile, max lift 105Kg, lifts up to 1900mm

Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R5200; Year of production 1989; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 182mm; Forming width: 370 mm; Molding depth: 70mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 1800 mm; Weight: 1400 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R230; Year of production 2002; Machine designed for packing sandwiches; Working only with hard foil; Bottom foil: +/- 320 mm (approx); Upper foil: +/- 315 mm (approx); Molding length: 165mm; Forming width: 80mm; Molding depth: 80mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 2100 mm; Weight: 1500 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R270 CD; Year of production 2004; SKIN packing machine; Working only with hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 244mm; Forming width: 364 mm; Molding depth: 80mm; Formats: 2.1; Length: 6800 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.