138,082 used machines on RESALE, but how to find them? Machine Search
Key data: 3200 kN, 359 g/PS, 50 mm
1.0 St. gebr. Two-component injection molding machine Manufacturer: ARBURG Type: 720A3200-800/70 Year of Make: 2017 Clamping force: 320 tons Spar spacing 720 x 720 mm Installation height min./max.: 300 - 800 mm Opening travel: 600 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 359 g Screw DN 2: 22 mm Max. displacement: 34 cm³ Moulded part weight in hp: 31 g Control: Selogica Request technical equipment.
Multi-speed machine with flexible shaft BIAX type MB 4-2Masch. No. 9/50/55 Year of construction approx. 1970Length of the flexible shaft: 2 metersSpeed: 900 - 9000 rpm. infinitely variableMotor speed: 3000 rpm. Motor power: 1.2 kW = 1.5 HPerg connection: 380 volts, 50 Hz- handle straight grinder with collet 6 mm- swivel and rotatable foot transport trolley with 2 drawersOverall dimensions: 850 x 550 x 1100Weight: approx. 80 kggood conditionUniversal for milling, grinding and polishing work; used
Vertical Multistage High Pressure Centrifugal Pump GRUNDFOSNome pump, but part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-Vyear approx. 2012Flow rate at 7.2 bar: max. 10 m3/hDischarge height: max. 91.8 metersGrid connection: 400 volts, 50 HzPower: 3 kW- pump structure in 9 stages- made of stainless steel 1.4401- The pump in mint condition was used as a spare parts dispenser, but there are several new pump chambers- part of the magnetic coupling is missingsuitable for drinking water supply, irrigation
Ref. no.: 18092 Manufacturer: ENGEL Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil fe ...
ISVE COMBI 80/80S-GR700, including loading and extraction belts, sturdy supporting structure, TWIN SHAFT SHREDDER with, loading hopper, shredding chamber 800 x 800 mm., dust and liquid proof bearing cases, n.2 shafts on upper part, n.42 rotating knives with staggered hooks, n.2 planetary gearboxes, n.2 x 11 kw Siemens drives, automatic inversion on overcharge, GRANULATOR type C 40-70, soundproof cased, rotor wiudth 700 mm, rotor diam.400 mm, screen 40 mm, V-belt transmission, 22 kw drive, Electric cabinet wit S7-1200 Siemens PLC and touch screen display, Users manual, CE, electrical drawings, installed power - used power in work: about 60-65% : 44 kW, availability: immediate, working width: 800 mm., conditions: fully reconditioned, type: SHREDDER + GRANULATOR - 40 mm screen
HEAVY DUTY SINGLE SHAFT SHREDDER - multipurpose, Main applications:TYRES - CABLES - WEEE - LIGHT METAL SCRAPS - OIL FILTERS, and other industrial waste, Rotor length: 1,200 mm, Rotor diameter: approx. 500 mm, rotor speed 144 rpm, Cutting chamber opening: 600 x 1.200 mm, 30 rotating blades, 16 fixed blades, Installed power: 1 x 132 Kw IE3 (belt drive), Siemens (PLC and control equipment), Schneider Electric (protections, switches and power supply), Omron (sensors and auxiliary modules), Power supply voltage: 3~ 400 V – 50 Hz, screen holes bespoke to project, Robust structure with interchangeable internal armour plating in wear-resistant steel., High-inertia rotor designed to minimise wear and optimise cutting power., Blades can be resharpened several times, Quick blade and grid replacement system with easy access., Hydraulically opening grid cradle for easy maintenance and grid replacem ...
Cylinder part for Multi for GDK3500 die casting machine, 931732, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The cylinder part for Multi comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and fully functional. The cylinder part for Multi item 931732 from Frech/Müller Weingarten. Suitable for Frech/Müller Weingarten GDK 3500 machines with 185-tonnes or 220-tonnes units.. Weight 720 kg. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, ...
MANZ Hearth Oven Model 60/6 with 6 Cookers - Inside and outside completely made of stainless steel - Baking surface 60x40cm - With exhaust hood with integrated steam condenser - Inner height baking chamber: 18cm Dimensions: 77cm wide 80cm deep 212cm high
Dimensions (L/W/H): 2200x1800x1250 mm Weight: 1700 kg Total power requirement: 23,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2300x1800x1400 mm Weight: 2300 kg Total power requirement: 37 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2300x1800x1400 mm Weight: 2500 kg Total power requirement: 37 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2200x1200x1250 mm Weight: 1000 kg Total power requirement: 16,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2200x1500x1250 mm Weight: 1500 kg Total power requirement: 23,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3076x1250x1600 mm Weight: 2000 kg Total power requirement: 25,32 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1900x1000x1250 mm Weight: 800 kg Total power requirement: 12,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3600x800x1900 mm Weight: 2400 kg Total power requirement: 16 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3500x1950x1500 mm Weight: 2500 kg Total power requirement: 58,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3225x1750x1200 mm Weight: 1200 kg Total power requirement: 16,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Miwe deck oven is available. Decks: 4, heating type: oil, heating circuits: 2, usable baking area: approx. 8m², oven width: 1200mm, oven depth: 1600mm, max. temperature: 300°C, machine dimensions X/Y/Z: approx. 1600mm/3350mm/2350mm, weight: approx. 2000kg. Including lifting table Unimetall SH 101. An on-site inspection is possible.
Baking oven, gas, steam. Dimensions: width 246 cm, length 323 cm, height 225 cm Floor dimensions: width 120 cm, depth 200 cm, height 15 cm The stove is in very good condition! Price available on request.
Deck Oven Friedrich E5 1,2/8 - with glass front on both sides - 5 shelves each 120cm wide and 80cm deep - With digital control - 160mm Bac Chamber Height - With exhaust hood
Deck Oven Quail Piccolo I-3 - Manufacturer: Wachtel - Type: Piccolo I-3 - In-store baking oven with 3 shelves, 1 proofer, 1 exhaust hood - Inner dimensions per floor: 60x80cm, suitable for 1 tray 60x80cm or 2 trays 60x40cm - Each floor can be controlled individually - Each floor with steam function / steam function - Each floor with top and bottom heat, separately controllable - Control: IQ Touch control - Shelf height approx.: 16cm Technical data; - Electrical connected load: 16.4 kW - Voltage: 400 V AC/3Ph/N/PE/50Hz - Year of construction 10/ 2019 - External dimensions approx. : 98x135x202cm WxDxH
An electric deck oven Wachtel Piccolo I-4 DMS3 with 4 shelves each 60x80cm is functionally tested for sale and immediately available. Deck oven Wachtel Piccolo I-4 DMS without steam - 4 shelves each 60x80cm - Each floor with separate controls - Top and bottom heat can be controlled separately - without steam function! - Control: DMS 3 Master - With storage cabinet for trays - With exhaust hood - Shelf height approx. 16cm (see picture) - Year of construction 2007 - 20.8 kW - Voltage : 400V AC/3Ph/N/PE/50Hz Further information and shipping costs on request.
- 5 floors each 60x80 - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with separate steam box - with proofer - With exhaust hood - Floor entrance height top floor 20cm - Floor entrance height lower 4 floors each 14cm - Year of construction: 02 / 2014 - Electrical connected load: 24.97 kW - Voltage: 400V AC/3Ph/N/PE/50Hz External dimensions approx.: 118cm width 116cm depth without exhaust hood 230cm height
- Deck oven Wiesheu electric - 6 shelves each 80x60cm - Double chamber with 1 display each - Each floor with steam function - Power 32.4 kW - With exhaust hood -with proofer -Mobile on castors - Year of construction 2017
A used Miwe Condo CO 5.0806 is currently for sale and immediately available in our warehouse. This stove is equipped with stone slabs of 80x60cm per floor. In addition, the oven has a digital Miwe FP control system per floor for the separate control of the 5 baking levels. With the Miwe FP controller, up to 30 baking programs can be stored. - Manufacturer: Miwe - Type: Condo CO 5.0806 - Stone slab stove - 5 shelves each 80x60cm - Max. temperature 320°C - Digital Miwe FP8 control - Mobile on swivel castors - Floor entrance height: 17cm - Technical data: - 29.1kW - 400 / 230V 3/N/PE - 50 Hz External dimensions: Width: 90cm Depth: 100cm (exhaust hood extra +40cm) Height: approx. 215cm
Deck oven Wiesheu EBO 6-86L Deck oven Wiesheu EBO 6-86 L - 6 floors are each Wiesheu EBO 86-L - With extractor hood including fan - With base frame - 6 stoves each 80x60cm - each stove with stone top - Digital Wiesheu Comfort control - With fixed water connection - Swath box for swaths - Each floor with viewing glass - Each floor with lighting - Oven is mobile on castors - Tested and cleaned Technical data: - Year of construction 02 / 2015 - Connection each 2 EBO 86-L 10.8 kW - Total connected load 32.4kW - 400 Volt 3/N/PE 50 Hz - External dimensions approx. 114x110x206cm (WxDxH) The furnace is fully assembled and ready for loading in the warehouse.
A used Wachtel Piccolo PRO II-6 deck oven from 2009 is currently for sale and immediately available in stock. - Stone slab oven built in 11 / 2009 - Manufacturer: Wachtel -Type: Piccolo PRO II-6 - 6 floors - 120cm wide and 80cm deep on each floor - With fixed water connection - each floor is equipped with separate swash box - Each floor with separate control - Top and bottom heat can be controlled separately - Oven can be moved on castors - Master control - electr. Connected load 50.4 kW - Year of construction 2009 Outer dimensions approx: Width: 157cm Depth: 128cm Height: 238cm
Deck Oven Miwe Condo CO 4.1208 - Manufacturer: Miwe - Model: Condo CO 4.1208 - 3 shelves each 120x80cm - each shelf for 2 trays 60x80cm long next to each other or 4 trays 60x40cm - Each floor with separate control panel display - Top and bottom heat can be adjusted separately - Each floor with separate steam box - With restart function - With ECO function -each floor individually 9.45 kW together 37.8kW Entire furnace with proofer 39.7 kW - with proofer Proofer 1.9kW - With exhaust hood - Can be moved on castors - Year of construction 2004
A used deck oven Friedrich E6 8/6 manual is for sale and is immediately available in our warehouse. Deck Oven Friedrich E6 8/6 Bakery Oven 15 pieces in stock - 6 shelves each 80x60 cm - Each floor can be controlled separately with bottom and top heat - Each floor with separate steam box - each floor with glass/sight glass - With exhaust hood incl. fan - Manual control - Shelves flaps are made of glass (visible) - Floor entrance height lower 5 floors approx. 12.5 cm -Floor entrance height top floor - Exhaust hood protrudes 22cm at the control - 3.3kw per floor, all together 19.8 kW -Outer dimensions approx. width: 114.5cm Depth: 108cm Height: 223cm -We have 15 of these stoves in stock
A used electric deck oven Wachtel Piccolo I-6 IQ with 5 shelves each 60x80cm is for sale. The oven is function-tested immediately available in stock. The oven is equipped with exhaust hood and proofer. Shipping costs on request. Deck Oven Quail Piccolo I-5 IQ Year: 04 / 2018 - 6 shelves each 60x80cm - Each floor with separate controls - With touch screen display - Top and bottom heat can be controlled separately - Each floor with a separate steam box for the generation of steam - With automatic night start function - With exhaust hood - Stove with water connection for steam - with proofer - Floor height see picture 140mm - Height is adjustable - Electrical connected load: 29.4kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction 04 / 2018 -Outer dimensions approx. depth 134cm - Height 220cm -Width: 97cm
Key data: 2000 kN, 352 g/PS, 50 mm
1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2000 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 450 mm Opening travel: 700 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 352 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control
Key data: 2000 kN, 216 g/PS, 40 mm
1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2001 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 550 mm Opening travel: 700 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control
Key data: 2000 kN, 216 g/PS, 40 mm
1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2004 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 500 mm Opening travel: 750 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control
Used deck oven WACHTEL, type: Infra -In bakery condition- - 5 stoves of 1.8 x 0.8 m each - 8m² baking surface - Digital control - Complete in one piece (not disassembled) - Assembly on request - Condition: good, ready for immediate use - Technically everything tested and cleaned The oven is in good condition and is ready for immediate use. On request, we can set up the stove on site. A complete overhaul is of course also possible.
Deck Oven Miwe Ideal 6.1820 - 5 Miwe Ideal deck ovens approx. 22sqm baking area - Manufacturer: Miwe Michael Wenz GmbH - Type: Ideal 6.1820 - a stove is 180cm wide and 200cm deep with 6 shelves - Total baking area of one oven 21.6sqm - with gas burner - with pull-out stoves - Year of construction 2007
Pharmatec 500-S4 Multistage pressure column distillation unit Stainless, designed for the production of sterile, non-pyrogenic water for injection (WFI), all mounted on skid, four column system, 660 l/h pressurized heating steam, 4Bar, adjustable controls, 3Ph
Key data: 3200 kN, 309 g/PS, 50 mm
Production Line Manufacturing Coffee Capsules NESPRESSO Consisting of the following components: Pos. 01) Injection moulds for capsules, manufacturer: FOSTAG AG 1.0 pcs tool with 16 cavities 1.0 pcs tool with 32 cavities Pos. 02) Two-component injection moulding machine, Bcobrsw Nriue Rvf Nyju Manufacturer: ARBURG, Type: 720A3200-800, Year of manufacture: 2017 The capsules are made as falling parts.
Dimensions (L/W/H): 1600x1500x1500 mm Weight: 1400 kg Total power requirement: 12,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Code: 0297 Brand: COSMEC Model: SM 100 Automatic multi blade saw for wooden boards, sawmills, carpentry workshops, wooden window frames and various Technical data: Conveyor belt width 250 mm Max cutting height 100 mm Min/max sawblade diameter mm 250/300 Hole 60 Motor 20 Hp Blade feed speed 5/30 mt/min Feed motor 1 Hp Non-return protections Conveyor belt lubrication pump Weight kg 1200
Three identical base modules of the Rampf MC-EASY multifunction dispensing cell are available. Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement, with static 1K and 2K dispensing system. With automation module Digital Robot HORST600 and central operating software for all process participants, with 3x side panels and 1x door, comfort handle, profile half cylinder, base plate for the robot as well as consumables, operator console, light barrier, system light each individually positioned, mounted and wired, panels made of Makrolon. An o ...
Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control by Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement and dispensing control by Beckhoff, with static 1K and 2K dispensing system. An on-site inspection is possible, not under power.
We offer industrial equipment for restaurants, bakeries, cafes. Everything is in working order, used. We are open to negotiations on price and delivery. METOS stove Noka NO25410 230V, 1,5kW, 7A, 50Hz
Loading utility: 500 Liter weight: 0,3 t dimensions: 1750 x 730 x 1080 m Electric tipper - Operating time with a fully charged battery: 8-10 hours - Battery charging time: 6-7 hours - Hydraulic tipping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
