multi rip saw used for sale

Used and in good condition Koma Multi-deck KMD-4-240-1500 Z-profile freezer with 3x hand over of product. Effective belt width 2.380 mm and effective belt length 4 x 15.000 mm. Belt speed can vary between 0,07 m/min and 2,30 m/min. Belt drive motors 4x Flender drives and automation. 6x Evaporators from Goedhart LLK.p 187 M2 with a capacity of 27 kW at 25.000 m³/h per piece. Fans have a downblow of 45°C. This multi-deck comes with a complete installation. 6x Bitzer S6F-30.2Y-40P (x2) compressor set with liquid reciever, oil separator, filter, pressure safety switches and gauges. 6x Koma CAV L09 1x2A condensors with 2 fans. Installation complete with control panel with Somron sysdrive inverters. This tunnel freezer is currently assembled in our warehouse, ready for a viewing. 800 piece/h apple pie in 60 minutes ( 2200 grams/piece) +40ºC to -18ºC. Brand: Koma Type: Multi-Deck KM ...

MultiSorter is a standardized solution for the fully automatic feeding of unsorted components. The components are fed into the system, where they are separated and then forwarded to the robot. The robot picks the parts using the vision system that is fully integrated into the control system. System. The vision system guides the robot and ensures that components with incorrect placement are automatically returned. It can also monitor the quality of the components. The system ensures that the components do not overlap to the robot via the feeding mechanism. MultiSorter also has a built-in emptying function, which allows for quick and easy product changeover. The entire system is built on a transportable, stable steel frame in which everything is integrated and assembled. This enables fast and efficient installation and commissioning at the customer's site. The system can be combi ...

The all-rounder combines outstanding workmanship with a wide range of work. Our machine also offers intuitive operation that optimizes your packaging processes. A high-quality material unwinder with double automatic roll centering ensures precise material guidance. In addition, our active material preference device ensures optimal web tension for flawless packaging results.  The extremely powerful brushless motors and the user-friendly color touchscreen control system give you maximum flexibility during format changes, greatly simplifying your packaging operations. The machine has memory slots for setting the machine parameters. Up to 50 different products can be stored. For this packaging line, we also offer fully and semi-automatic feeders, which we can also integrate for you at a later date. The machine is available in both directions and has a rotary cross seal with electroni ...

approx. 111 pieces Corlettes, Cordes and Koch, width 1.30 / 2m / 2.40m - used - : Prices per piece from location (net): Type 1 + 2 (2m wide): only 99.-€ Type 3 (1.30m wide): only 69.-€ Type 4 (1.30m wide): only 99.-€ For complete purchase (priority): 8.950.-€ (net) Manufacturer: Cordes und Koch Type: Corlette / Multi-Box Year of manufacture: unknown Foldable Not stackable Depth: 1.15m Type 1 – approx. 70 pieces Width: approx.: 2m, Height approx.: 1.80m Type 2 – approx. 32 pieces Width: approx.: 2m, Height approx.: 1.92m Type 3 – approx. 6 pieces Width: approx.: 1.30m, Height approx.: 1.80m Type 4 – approx. 3 pieces Width: approx.: 2.40m, Height approx.: 1.80m Condition: good, see photos Available: immediately Location: Nuremberg

I'm selling a Mazak Multiplex 6200 lathe-mill. It's in very good condition, still powered up. Inspections are available by appointment. The machine is highly efficient, with two spindles, two independent heads, and a milling capability (C-axis). It's equipped with a partition wall that automatically closes from the control panel. When the wall is closed, the machine can operate as two independent lathes. It can also operate as a standard lathe with a retractable handle. I can send videos and more detailed photos of the machine. Transportation and training are available. I also have other machines for sale. Technical Specifications 640 Control (Windows) Milling Two spindles Two independent tool heads Mazatrol 640T Control Year of Manufacture: 2000 Spindle speed: 0-5000 rpm Milling speed: 0-4500 rpm Turning diameter: 320 mm Turning length: 440 mm Number of tools: 2 x 1 ...

Slicer line with insert Suitable for slicing cooked ham in bread loaf and tunnel large form as well as 105 cal. Boiled sausage Knife: Multivac/VC, reserve, sickle, 23°/5°, z-toothed Line consisting of: - Slicer, manufacturer VC999, type SL600 Scale, 4-lane walk-through checkweigher with 4-lane rocker, manufacturer VC999, type CW404 scale, 4-lane walk-through checkweigher with 4-lane rocker Automatic inserter, 4-lane, for film widths from 420 - 620 mm, manufacturer VC999, type SB620 Description: SLICER SL600 Automatic central loading: - Ergonomic working heights allow easy manual product loading and line connection - 800 - 1000 mm loading height Servo anqetriebene production guide above and below: - Servo-driven product guide belts at the top and bottom ensure precise, even, pressure-free and gentle feeding of the products during cutting - Servo dri ...

MEP Multimatic SA8, year of construction 1995 Straightening and cutting system for reinforcing steel, fully automatic, complete functional system, immediately available Plant still in operation and can be demonstrated.

I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.

Multivac MR 335 tamper-evident labeller for the application of 2 self-adhesive tamper-evident seals on the closure points of formed cartons, 2 label dispenser model SUPER MR4000, label passage width max. 50 mm, label reel maximum diameter 360 mm, reel core diameter 76 mm, labelling speed up to 1.2 m/s, width of through conveyor 190 mm, speed of conveyor from 0.35 to 1.08 m/s, infeed/outfeed height approx. 820-920 mm, machine on wheels, electrical connection 230V/50Hz, 16A, maximum load 2.5 kW, compressed air 6 bar, machine floor space approx. 2738 x 1210 mm (WxD), machine height approx. 2300 mm, machine net weight approx. 700 kg

All types of conveyors according to the buyers specifications

Siemens Multix FD with the following system components: Generator Polydoros LX 30/50 Lite Tube Opti 150/30/50 HC 0,6/1,0_Baujahr 06/19 Vertical tripod Vertix FD 2x Detector Trixel Pixium 4600 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authorized by the manufacturer!

M. No.: 99051725 Format (cm): 35x45 Equipment / Additional information: Pockets: 2 Fold types: spiral fold, zigzag fold, double parallel fold, single fold Underfloor suction feeder: 30 000 bph Friction feeder: 20,000 sheets / h with parallel fold A4, 80 g / m2 Paper weight: 40 - 250 g / m2 with simple parallel fold Electrical connection values: Mains voltage: 230V Current consumption: max.IOA

Packaging machine - Flowpack Multi 30 horizontal packer Film width: 300mm Passage height: 40mm Packing speed: up to 120 pcs / min

Siemens Multix TOP ACSS with the following system components: Generator Polydoros IT 55 Tube Opti 150/40/80 HC 0.6/1.0_Bj. 2013 (ceiling hanging) Vertical tripod Vertix TOP • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the man ...

Siemens Multix TOP with the following system components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 C 0.6/1.0_Baujahr 2019 (ceiling hanging) Vertical tripod Vertix TOP • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the ...

Multigraf MCM-48 creasing and perforating machine Specifications MCM-48: Manual of the material feed Minimum format, mm 80x100 Maximum format, mm 480x500 Material density, g/m2 80-500 Dimensions, mm: 1100 x 605 x 300 Power supply: 220 V

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of construction: 2008 Retrofit: 2019 Suction table: 2,000 x 3,000 mm 1 oxy-fuel burner ALFA 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC

Compressors, control, compressor control, control panel -Handover: in its current condition as inspected -Cover bottom: damaged, see photo -Manufacturer: Ecoair -Type: Multitronic Control -Dimensions: 280/295/H120 mm -Weight: 2.6 kg

Battery charging cabinet, battery, emergency power battery, emergency power battery, emergency power system, power supply system, lead battery -Manufacturer: multipower, 2 lead batteries mounted on the base plate. -Power: 12 V 7.2 Ah each -Dimensions: 200/200/H120 mm -Weight: 5.6 kg

Siemens X-ray system type Multix / Vertix Swing with generator POLYDOROS IT/S in good condition

Combi steamer 20 x 1/1 GN, 400 V, Eloma Multimax B20-11, 400 V, 45 kW, 60A, Fixed connection, Steaming, Combi steaming, Hot air, NT cooking, Core temperature, Manual steaming, Clima active, Energy saving, Reduced fan speed, Autoclean, Water shower, Dimensions 103x88x193 cm, Refurbished with warranty6300

Multivac A300 Vacuum packer Serial: 6818 2004, stainless vac packer, 450mm sealing bar, 2.7Kw, mobile, 3Ph

TecHouse/Multigraf shed delivery tape 482.112; good condition; cleaned and tested; Length 1100mm; Width 340mm; sensor for automatic control; Speed adjustable; height adjustable. TecHouse/Multigraf stream delivery 482.112; good condition; cleaned and checked; Lenght 1100mm; width 340mm; sheet detection sensor for stop and go mode; adjustable in speed; adjustable in hight.

Stapling machine nail Multinak S

Multipli with pheumatic bow feeder , compresser, double sheet control , 2 pockets

Syspal Multipurpose lifter 2020, Stainless, mobile, max lift 105Kg, lifts up to 1900mm

Quick change tool holder, tool holder head, quick change tool holder -Quick change toolholder holder: without tension clamp -Manufacturer: Multifix -Size: D -with mounting for: mounting on the support -Dimensions: 278/250/263 mm -Weight: 33 kg

Touchline CF375 performs creasing and folding work in a single operation. The system has a simple control panel, a reliable Stacking feeder with suction belt system and a unique creasing and folding tool. Important: The transport rollers must be replaced.

From September 2022 immediately available newly overhauled Multigrind HT retrofit machine prepared for resharpening hobs / worm gear cutters / pushers and cutting rotor Control: Siemens 840 D X - axis 650 mm Y - axis 400 mm Z - axis 280 mm A - axis (dividing apparatus) 360 ° SK50 C - axis (rotary table) 270 ° X3 - axle with tailstock Grinding spindle: HSK50 Dressing unit Tool changer: 10-fold magazine plate Coolant system: Turbo Separator Suction: LTA Extinguishing system Other accessories: Available ex works Software: Customer-specific delivery Financing / hire purchase possible.

Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R5200; Year of production 1989; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 182mm; Forming width: 370 mm; Molding depth: 70mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 1800 mm; Weight: 1400 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R230; Year of production 2002; Machine designed for packing sandwiches; Working only with hard foil; Bottom foil: +/- 320 mm (approx); Upper foil: +/- 315 mm (approx); Molding length: 165mm; Forming width: 80mm; Molding depth: 80mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 2100 mm; Weight: 1500 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R270 CD; Year of production 2004; SKIN packing machine; Working only with hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 244mm; Forming width: 364 mm; Molding depth: 80mm; Formats: 2.1; Length: 6800 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R530; Year of production 1996; Working only with hard foil; Bottom foil: +/- 465 mm (approx); Upper foil: +/- 455 mm (approx); Molding length: 192mm; Forming width: 404mm; Molding depth: 40mm; Formats: 4.2; Length: 7000 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1996; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 266mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.1; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

tool clamping area: . mm weight: . t approx. 53 piecesThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

THERMOFORMER, MULTIVAC, TYPE: M855FMC Technical description: Serial number: 1378 Format: (1x) 172 x 112 mm Power supply: 380/440 V - 50/60Hz Power: 7 kW Excess film extractor Dimensions: 4500 x 1300 x 1950 mm It includes: Automatic tray unstacker Filter unit Excess film remover

clamping force: 4200 kN injection volume: 1212 /292 cm³ screw diameter: 70 /15 mm platen size: 1200 x 1100 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1: - Screw diameter: 70 mm - injection volume: 1.112 cm³ - weight: 880 g injection unit 2: - Screw diameter: 15 mm - injection volume: 292 cm³ - weight: 190 g Clamping unit: - Clamping force: 1200 kN - Centring: 160 mm - Platen size: 1200 x 1100 mm - Mould size: 810 x 710 mm - Mould thickness min.: 380 mm - Mould thickness max.: 940 mm - 4 & 4 Cascades - 4x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 192 kW - Dimensions L/W/H: approx. 7,900 x 2,200 x 5,000 mm - Weight approx.: 25,000 kg Further DEMAG plastic i ...

clamping force: 800 kN injection volume: 106 / 42 cm³ screw diameter: 30 / 22 mm platen size: 600 x 600 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 30 mm - injection volume: 106 cm³ - weight: 94 g injection unit 2: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 600 x 600 mm - Mould size: 420 x 420 mm - Mould thickness min.: 250 mm - Mould thickness max.: 590 mm - Voltage: 3x 400V, 50Hz, N, PE - Total power: 42 kW - Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm - Weight approx.: 5,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for th ...

Vacuum ejector, vacuum pump -Manufacturer: Piab, Multi-Ejector Vacuum Pump with Filter -Individual components: see photos -Overall dimensions: 375/210/H290 mm -Weight: 4 kg

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Hydr . Flat profile and bar steel shears with notching device and hole punching Specifications: - Flat steel shears cut up to 375 x 10 mm - 220 x 20 mm - Profile steel shears - cuts L-steel at 90° to 130 x 13 mm - Steel bar shears - cuts round steel up to 45 mm - Square steel up to 45 mm - Notching device - with square notching device 100 x 42 x 10 mm - Hole punch - punching force 600 KN - with stop table - Projection 300 mm - perforated in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Squirrel wrapping machine, Fabr. König-Celba, Type Multiroll-S 50 N

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Charger: for forklifts, type D 24/200 MULTI WF200 -Input voltage: 400 V 50 Hz -Power: 24 V/200 A -Dimensions: 555/520/H890 mm -Weight: 119 kg

Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: multicomp, axial fan type MCFS23092A/2092HBL.GN. Unused, original packaging. -Voltage: 220-240 V / 14.5 W -Number: 4x fans available -Price: per piece -Dimensions: 100/100/H35 mm -Weight: 0.3 kg