multi rip saw used for sale

A used deck oven Friedrich E/4 6/8 Elektro with 4 levels, proofer and exhaust hood is for sale and immediately available. Floor oven Friedrich E/4 6/8 Electric - 4 floors each 60/80 - Top and bottom heat can be controlled separately -digital control - with proofer - with exhaust hood - mobile on wheels -Floor height 18 cm External dimensions width: 90cm Depth: 125 cm without hood Height: 210cm

Miwe condo deck oven  Type: CO 3.0806  Specifications: 3 tiers 80×60 cm sheets Stainless steel cladding in black lacquered digital control Year of construction: 2016 with extractor hood  with lower tray for 60x40cm sheets mobile on castors Specifications:  400 / 230V 3/N/PE 50 Hz / 117.3 kW Dimensions:  Height: 210 cm Width: 100 cm Depth: 100 cm

Multi-spindle head, multi-spindle drilling head, drilling gear -Manufacturer: Romai, multi-spindle head 2 spindles -Type SMSK 2/23 -Drilling tool holder: MK3 -min. distance drill bit: mm -Dimensions: Ø 220 x 455 mm -Weight: 27 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife holder for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 43 x 100 mm -Design/Dimensions: see photos -Dimensions: 420/436/H100 mm -Weight: 20.9 kg

Heads 14 pieces Capacity max 130 Portions/min. Dimensions Multihead weigher (L x W x H): ± 1.120 x 1.120 x 1.080 mm Portion size: max. 3L Portion size: max. 65 x 65 x 40 mm. Minimum diameter 1.5 x 3 mm. Maximum weight: 80g/piece Control : Bilwinco microprocessor Consumption: 5000 VA IK Max.: 10 KA 50 Hz Power: 3 x 400 V,N, PE Range: 10g – 1000 g Air pressure: 6-7 bar With podium and Z-conveyor: Dimensions: (L x W x H): ± 3.300 x 6.000 x 4.050 mm

- electric stone plate oven for 60x40cm trays - 5 tiers each 60/40cm - Top and bottom heat can be controlled separately -digital control - with exhaust hood - movable on castors - Floor height 14cm Dimensions: Width: 90cm Depth: 95cm without hood Height: 210cm

Display, display module, display panel, multifunction counter, controller, bidirectional counter, preset counter, digital counter -Manufacturer: IVO, Multifunction Digital Counter with 8-digit LED Display -Type: NE212.012AXA2 -Item No.: 301074 -Dimensions: 115/75/H70 mm -Weight: 0.5 kg

Display, display module, display panel, multifunction counter, controller, bidirectional counter, preset counter, digital counter -Manufacturer: IVO, Multifunction Digital Counter with 6-digit LED Display -Type: N 214.002AX01 -Item No.: 300949 -Dimensions: 130/110/H50 mm -Weight: 0.4 kg

Deck oven Wachtel Piccolo I-5 DMS 3 Master EM 100 glass - 5 floors each 80x60 - each floor with separate control - Top and bottom heat can be controlled separately - each floor with a separate steam box - Floor entrance height: 14cm - with proofing cabinet - with exhaust hood - Floor entrance height top floor 20cm - Floor entrance height lower 4 floors each 14cm - Year of construction: 12 / 2014 - Electrical connected load: 23.7 kW - Voltage: 400V AC/3Ph/N/PE/50Hz External dimensions approx.: 118cm width 116cm depth without exhaust hood 230cm height

Multifunctional punch, punch press, hole punch, pneumatic hole punch Article No.: 296 566 -Weight: 170 kg

Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1995

Used deck oven HEIN, type: Universal -in bakery condition- - Deck oven with 4 shelves - 12m² baking surface - Analogue control - Extractor hood with fan - Condition: good, technically tested The oven is in good bakery condition and is ready for immediate use.

Edur multi-stage centrifugal pump, 15 cbm p.h., 7.5 bar, LBU404C120L Flow rate: 15 cbm/h Head/pressure: 75 m / 7.5 bar RPM: 2,900 KW / voltage: 4.4 / 400 V, motor 7.5 KW Suction side / discharge side: DN 65 flange 180 mm (flange with milk thread connection DN 65) / DN 40 flange 150 mm Type: Stationary, pump head in stainless steel, for liquids, Bauj. 2006 L 780 mm, W 290 mm, H 350 mm Type: LBU404C120L Manuf.: Edur-Pumpenfabrik Product number: 2023002

Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1999 -Dimensions: 600/600/H1300 mm -Weight: 50 kg

Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 2x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 33 mm -Dimensions: 100/80/H130 mm -Weight: 2 kg

Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Quantity: max. 1x drill bit -Recording: M8 -Dimensions: 80/80/H150 mm -Weight: 0.8 kg

Roller Wacker WHK 90 L, self-propelled hydraulic articulated roller, hydrostatic drive, 2 cyl. Lombardini diesel engine, air-cooled, 10 kw/14 hp, hydraulic articulated steering, vibration compression. Working width 850 mm, defective water sprinkling, weight 1,335 kg, mast for rotating warning light. Built in 1987, machine running. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...

Gerstel / CTC Mutlti Purpose Sampler MPS complete For the LC as well as GC YOC 2014, tray for 98 vials (2ml), gas-tight injection syringes

BMG Polarstar Optima and Fluostar Optima Multimode Microplate Reader Up to 384 wells Fliter wheel 8 Excitation Filter wheel 8 emission Fluorescence intesity -time resolved fluorescence -Absorbance and luminicence POLASRSTAR Fluorescense polarization mode linear and orbital shaking Fluorescence 240-740 nm Absorbance 240-740 nm Fluorescence polarization 380-740 nm Additional 12 more filters

A centrifugal pump with 10 stages with 160KW electric motor and adjustable base frame is offered. Data of the pump: 128m³/h at head 310m Speed 1430 /rpm P 139KW Year: 05/2006 Electric motor: 160KW 1000V 118A 1,485 rpm

Auction-ID: A7-45252-3

Auction-ID: A7-45252-2

Brand: Fiat Model: Doblo • Variant: Estate / Cargo (double cab, 5-seater) • Registration date: 28.10.2016 • Vehicle class: Commercial vehicle / light van • Colour: White • Engine: 1.6 Multijet Diesel • Power: approx. 77 kW (105 hp) • Fuel: Diesel • Transmission: Manual • Drive: Front-wheel drive • Permissible total weight: approx. 2,000 – 2,100 kg • Emission class: probably Euro 5 • Seats: 5 • Sliding door right / left • Glazed side wall in the cargo area • Rear wing doors (double-leaf) • Fabric interior • Power steering • ABS, ESP • Driver's airbag • Passenger airbag • Steel rims • Adjustable exterior mirrors • Radio • Rear bench seat (3 seats) • Interior with signs of wear, see pictures • Body with scratches • No obvious accident damage visible • General condition: used, com ...

Auction-ID: A1-45411-80

Gearbox two speed 4 Chain Drive

Chain drive for Multivac R230 Two speed

Multi-spindle lathe (8 spindles) max. rod diameter 16 mm Guide tubes 4,000 mm Conveyor

good driving car Auction-ID: A1-42013-139

GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax. Turning Length300 mmMax machining diameter320 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmWeight approx.8000 KgMovements X / Z210/810 mmCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...

GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax machining diameter320 mmMax. Turning Length300 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmMovements X / Z210/810 mmWeight approx.8000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...

Auction-ID: A7-45768-112

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...

Macchina completa di seconda e terza iniezione, termoregolatori e protezioni. n.16 camere calde n. 8 radiali pneumatici

MACCHINA CON ROBOT INTEGRATO ERC 13/1-E RECENTEMENTE SOSTITUITE GUARNIZIONI GRUPPO INIEZIONE

Camere calde 8 zone Piani magneticii

Macchina predisposta per una terza iniezione Macchina completa di termoregolatori e protezioni n.16 camere calde n.8 radiali ad aria

macchina bi-iniezione iniezione verticale con vite diametro 20mm paranco portata 200kg altezza da terra 3800mm

Macchina predisposta per una terza iniezione. Macchina completa di termoregolatori e protezioni. n.16 camere calde n. 8 radiali ad aria

Macchina predisposta per una terza iniezione. Macchina completa di termoregolatori e protezioni. n.16 camere calde n. 8 radiali ad aria

Number of spindles 8 Controller Siemens 810D Chuck diameter: 130 mm Max part diameter: 135 mm Total stroke: 125 mm Working length: 100 mm

Deck oven Wiesheu EBO 3-68 320 Manual (Honeywell) Electric with proofer - Each floor with separate control - Top and bottom heat can be controlled separately - each shelf for 1 tray 60x80cm long or also 2 trays 60x40cm crosswise one behind the other - with proofer - with steam condenser - each floor with steam function - Year of construction 2007 - Each floor 4.85 kW connected load - Total connected load approx. 16.7 kW

This 9-axis Muratec MT200 multi-spindle turning machine was manufactured in 2019. It features a maximum bar capacity of 65 mm and a chuck size of 210 mm. The machine includes an impressive maximum feed speed of 24 m/min on the X-axis and 36 m/min on the Z-axis. If you are looking to get high-quality turning capabilities, consider the Muratec MT200 machine we have for sale. Contact us for further details.

This 4-axis MORI SEIKI RL2500 was manufactured in 2003. It features a maximum turning diameter of 400 mm and includes two turrets with 12 stations each, providing efficient machining capabilities. The machine is equipped with a Mori Seiki MAPPS MSX-501 control and has a spindle speed of 3500 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI RL2500 multi-spindle turning machine we have for sale. Contact us for further details.

This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum workpiece diameter of 175 mm and a maximum bar diameter of 65 mm. The machine is equipped with two turrets, each with 12 driven tool positions, and offers a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details.

Alfa-Laval multistage / centrifugal 3-stage pump YOM 2001 22 KW 2930 RPM Made in Denmark

This 3-axis HOMAG WEEKE OPTIMAT ABD150 was manufactured in 2014. It is a used multi-spindle drilling machine designed for precision drilling and dowel inserting. If you are looking to get high-quality drilling capabilities, consider the HOMAG WEEKE OPTIMAT ABD150 machine we have for sale. Contact us for further details.

Auction-ID: A1-45866-42