multi blade saw used for sale

Multivac R 240, film width 430 mm, fume hood 530 mm, 5 formats, soft film, fumigation, good condition. Still in production until February 2024

Multivac AG6 swing top vacuum packer Swing top vac packer, twin chamber, 450mm sealing bars, buusch vac pump, mobile, 3Ph

The Multivac R535 packing machine from 2012 is about 11.3m long. It has a 607 mm upper film and a 623 mm undercarriage.

Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder, steel holder -Quick-change turning tool holder: Multifix CD 40170 -Type: Size C -Shooting dimensions: see photos -Clamping length: 170 mm -Dimensions: 170/70/H155 mm -Weight: 3.9 kg

Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder, steel holder -Quick-change turning tool holder: Multifix CH 40160 -Type: Size C -Shooting dimensions: see photos -Clamping length: 160 mm -Dimensions: 160/70/H140 mm -Weight: 3.6 kg

A device for closing trays by Multivac with a capacity of up to 20 cycles per minute. This Multivac T700 packer is in very good condition with only 429 operating hours. This particular model comes with the SKIN packing tool. Tray size: 238 x 166 (D13); New Busch vacuum pump 360m3 / h; Input conveyor; Water cooling unit; Instructions;

Multivac C 500 is double chamber packing machine. This one with vacuum and gas flushing system. Double chamber machines from MULTIVAC are easy to operate, clean and service. They offer the highest output on the smallest footprint and also provide impressive performance over their entire machine life thanks to their production output and pack quality. The evacuation and gas flushing processes are pressure-controlled and thus guarantee reproducible packing results. MC 06 machine control with precise vacuum measurement in the chamber Machine dimensions W x D x H (with open chamber lid) in mm: 1,600 x 1,055 x 1,365 Sealing bar arrangement/dimensions: 1 x front, 1 x rear (2 x 650 mm)

Multivac thermoform packaging machine for kashar cheese /cheddar Lifting system for preheating Down film(soft) : Width : 357 mm Thickness : 200mm Up film(Soft) Width : 340 mm Thickness : 80 mm

Complete set and technical characteristics of the car: Format Tool: - Format 3 pieces 1-2, 2-2, 3.2 - Package height 5 / 35-15 / 45 mm, spacers 5 mm each - The bottom of the tray is even, smooth - Perimetric sealing plate - Packing type MGS - Type of the bottom film - soft (re-equipment on a rigid film is possible). - Productivity up to 6 cycles per minute General characteristics - Film width 420 mm (+ 2 / + 4) - Film thickness up to 300 microns - Width 650 mm - Height 2200 mm - Frame length 5600 mm 7 color touch screen control panel in Russian Possibility to store 20 programs password to access settings (three levels) display of the current state of the machine program test, washing program at closed stations (30 ° C) Unwinder bottom film for 3 cores, max. Ø 400 mm compressed air - Preheat film on top - Laying length 1500 mm - Vacuum pump Busch R5 100 m3 / h ...

The machine will be shipped with 3 tools: Tool 1: 2:1 packagingsize 225×170mm (variable forming depth max. product height 80mm); Tool 2: 3:1 packagingsize 225×110mm (variable forming depth max. product height 80mm); Tool 3: 3:1 packagingsize 195×110mm (variable forming depth max. product height 80mm);

Multivac T700 automatic traysealer (skin) Excellent high-speed traysealer from Multivac. This pre-owned T700 is in very good working condition and is from 2014. The automatic traysealers from MULTIVAC are suitable for industrial use – for packaging foodstuffs, medical and pharmaceutical products, and industrial and consumer goods. They seal trays made from various materials, such as plastic, aluminum, cardboard, and foamed materials, as well as a large variety of cover films. These machines enable a fast and efficient pack output with gentle tray handling. Shipped without tool; Optional: New Busch 360m3/h vacuum pump; Infeed conveyor belt; Power 4,2 kW Power supply 400/230 V Height 2100 mm Width 1000 mm Length 4900 mm Weight 1300 kg

Multivac R 145: Thermoformer 2017 production. Production Germany. The machine is operational. Tray molds included.

Thermoforming machine Manufacturer: Multivac Model: R 530 Year of manufacture: 2001 Film width 547 mm (Jumbo roll) Advancement 612 mm With dual mold sets: Ø 140 mm (9x) with stamper 132 x 140 mm (12x) For gas pack Incl. gas mixer and oxygen measuring Incl. ink jet printer and label applicator Incl. a booster pump and 2 external back pumps With central lubrication The machine has been frequently maintained and overhauled and appear in extremely good condition

Sleeve wrapping line MULTIPACK/IT type 479 with shrink tunnel, year of manufacture 2001. The products are conveyed through a curtain of shrinkable foil and closed by a sealing device at the end of the packing system. Right afterwards, the packing unit is conveyed through a shrink tunnel causing the foil to shrink up and firmly enclosing the packing unit. This way, the packages can be secured against reopening and the multipacks again falling apart. The shrink tunnel has a wire belt width of approx. 300 mm, passage height approx. 300 mm, length approx. 1000 mm.

Multivac C400 vacuum sealer, single-chamber unit on castors, with a new membrane keypad (the old one can still be seen in the photo), Gardener Denver 15cbm/h pump, with 3 shelves, year of construction 2008, chamber dimensions approx. 60x45x17cm, Connection 400V, total dimensions LxWxH approx. 86x75x103cm, weight approx. 270kg, used, functional

Multivac R085 Seeking an entry-level thermoformer with exceptional adaptability? Look no further than the Multivac R085! This powerful machine seamlessly integrates into diverse production lines, tackling standard applications with an impressive level of configuration. Unmatched Versatility: 5 Diverse Tooling Options: Choose from 1×1, 1×3, 2×2, 4×1, or 4×2 configurations to perfectly suit your packaging needs. Flexible Packaging Sizes: Create packages ranging from 100×97.75mm to 375x185mm, accommodating various products. Adjustable Forming Depth: Adapt to product heights up to 80mm for optimal presentation and protection. Additional Highlights: User-Friendly Operation: Streamline your workflow with an intuitive interface. Durable Construction: Built to last in demanding production environments. Cost-Effective Solution: Ideal for businesses seeking performance without break ...

Make : MULTIVAC Model : TS 250 Y.o.m : 2009 Condition : Good

Full packing line available used in the cheese industry., This line has been very well maintained and is in a superb working condition., The line has been professionally taken out production and stored in our warehouse., Have a look at the video for an overall impression of the line, please reach out for more information., - Weber CCA in-line system., - 2 lane to 4 lanes, - Multivac R530 thermoformer, - Film width; 600m, - Advance; ±600mm, - Top and bottom labeler with a printer for the bottom label, - Jumbo film holder, - Mark-reader for pre-printed film, - Robert-pack pick and place robot

Multivac R535 thermoformer, very very well maintained 2012 machine., Machine with a very consistent high output., Available straight from production late April 24, - Rigid bottom film, - Possible rigid top-film for a lid, - Top and bottom labeler with printer for the bottom labeler., - 600 mm film width, - ±600 advance/ stroke.

Polishing bench grinder, polishing bench, double polishing bench, polishing machine -Manufacturer: Multi-tool Grit, polishing machine double polishing stand with suction and mobile base frame -Type: GA 600 -Polishing discs: Ø 200 mm / max. Ø260mm -Motor power: kW -Speed: rpm -Dimensions: 1050/650/H1200 mm -Weight: 171 kg

Description: Belt cutter (belt width 100 mm) Workbench with 6 pull-outs, ,without contents , weight approx.: 80 kg, Approx. Onsite Dimension. (l x w x h): 950 x 620 x 1,000 mm

Film width 420 mm , Trigger 250 mm , Vario tool, MAP Machine completely overhauled and immediately available

Vacuum packaging machine Multivac C 500, built in 1999, 1st hand, barely used, no meat or fish was packaged, clean condition, Chamber dimensions: width 660mm, depth 750mm, height 200mm, Seal length: 2 x 650mm, External dimensions: width 1,600mm, depth 1,050mm, height max.: 1,320mm, Performance: approx. 2 cycles/min, Voltage: 400 volts, Weight: approx. 700kg, 6 gas nozzles per rail, protective gas device, Sealing rail with water cooling, Machine mobile, 1 piece rotary vacuum pump, Busch R5-RA 0250, 1-stage 250m3/h suction power, Dimensions / weight: LxWxH: approx. 3,100 x 1,000 mm x 2,000 m (without lifting and tipping device), weight approx. 800 kg

Scale output: up to 140 cycles/min.,, Weighing range: up to 2,500 g / depending on the number of drops,, Volume range: 1,500 ml per drop,, Weighing system: 2-beam DMS system,, Resolution: up to 0.1 g., Without control.

Line for filling delicatessen products in plastic trays, consisting of:, Cup filling system, make Waldner, type 12.3, year 2011, 2 lanes (2 different formats) - but it can only be worked in one lane., Format set 1: round cup diameter 100mm (incl. rim) height 80mm and 60mm, Format set 2: Rectangular cup 185mm long 135mm wide (including rim) 35mm deep, The trays are sealed with film from the roll, Roll magazine approx. 500mm long, 400mm wide, Waldner space requirement: approx.: 2,100 m 2,100 mm, Outfeed belt of the Waldner: approx. 1,800 mm, Dosing of liquid and free-flowing components:, The system has two filling heads, which are filled via a pipeline directly from the cooking kettle., The pipeline can be completely pigged., The pigging line and Maso - Sinus pump, type SPS 3, are included in the scope of delivery., Feeding of the multihead weigher by means of two belts:, Tunnel elevator  ...

Output: max. 80 packs/minute, designed for square cups (101 x 101 x 57 mm),, two lanes,, consisting of the following individual machines:, shell destacking, make Carsoe Anytray Twin Denester, year of construction 2013, volume dosing filler, manufactured by Lieder/Robot Food Technologies, series AWF, type 2, year of construction 2015, for free-flowing, non-sticky products that contain little liquid., min. 15 pieces of product must make up the volume to be filled The machine is designed for processing e.g. vegetable mixtures, rice, pasta, caviar, olives, etc., With lifting and tipping device and corresponding housing, without dispenser for liquid or pastes, self-made, Time-controlled pump for dosing oil, brine or pasty products such as dips or dressings, two filling stations,, tray sealing line, make Multivac type T700, year of construction 2012, Sealing of prefabricated trays, bowls and c ...

Tool quick coupler used and new, different sizes Partly Multifix, C , B , A, E, ... Can also offer them new ones. Assembly on request or self-assembly !

Multivac R 140 , built in 2008 , film width 420 mm , take-off 300 mm , variator tool, formats 1.1 + 2.1 + 2.2 , built-in vacuum pump, photocell with pressure mark control. well-maintained condition. Length 3.6 >meters

Multivac mobile traysealer, model: T200, serial number: 101677, year of construction: 2005, 415 V, 3 Ph, 50 Hz, 11 A, 4.5 kW, dye: (2x) 230 mm x 160 mm, Busch vacuum pump, type: RA 0063 E, capacity: 63 m³ per hour, total dimensions: 1050 mm x 780 mm x 1600 mm.

Manufacturer: Kason Model: K60-3-304SS Year : 2018 Type : Standard vibrating screen with one or more levels Diameter ? :150 cm / 60 Materials : stainless steel Separation screens : 2 Available screens : 2 Mesh size : 4 mm / 2 mm Frame / sieve locking system for transport

Description: please also have a look at the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 400 x 400 x 200 mm, weight approx.: 15 kg

Multivac thermoformer, type: R230, serial number: 1714, year of construction: 2002, 400/230 V, 3 Ph, 50 Hz, 38 A, 13.5 kW, film width: 410 mm, total dimensions: 7600 mm x 1050 mm x 2070 mm. Including Multivac suction device for rest film, type: F-CEVF 3718-3/105760792, serial number: SC10108857006, year of construction: 2011, dimensions: 750 mm x 700 mm x 1600 mm.

Optima Control Systems GmbH checkweigher, type: HC, number: 1002434, year of construction: 2004, 230 V, 50/60 Hz, belt width: 295 mm, maximum weight: 7500 gram, OCS metal detector, model: MN 2.2 C 350/175, serial number: 960204-C (NF), belt width: 290 mm, clearance: 350 mm x 135 mm, Multivac labeller, type: MR233, machine number: 30089/11, year of construction: 2011, 230 V 50 Hz, 700 VA, belt width: 295 mm, with double ejector, total dimensions: 4600 mm x 1300 mm x 2300 mm.

Multivac thermoformer, type: R530, machine number: 2602, year of construction: 2001, 400 V, 3 Ph, 50 Hz, 47 A, 21 kW, plastic rollers, roller width: 365 mm, thermoformer dimensions: 7850 mm x 1050 mm x 1950 mm, Busch vacuum pump, type: RA 0630 B 4Z3 EGZZ, serial number: C0434000327, capacity: 630 m³ per hour, dimensions: 1860 mm x 1150 mm x 1060 mm, pallet with parts, dimensions: 1200 mm x 800 mm x 550 mm.

A complete filling, sealing, inspection and labelling line is available, includes (1) Tray Destacker Carsoe, year of construction: 2013 (2) Volumetric Filler Lieder/Robot Food Technologies AWF 2, year of construction: 2015, with lifting and tilting device for loading, suitable for free-flowing, non-sticky and low-liquid-content products (3) Tray Sealer Multivac T700, year of construction: 2012, suitable for closing prefabricated trays, bowls and cups, evacuating, gassing and sealing (4) Covering Machine Buhmann Servolid 400, year of construction: 2012 (5) Labeller Multivac MR300/400, year of construction: 2012, with two integrated TTO printers Videojet, suitable for labelling trays from above and below (6) Metal Detector Mesutronic, with automatic rejection for bad packs (7) Tray Packer Somic 424DT, year of construction: 2013, output: 15 cartons/min (8) Hot-Melt Gluer Nordson, printer fo ...

pressure:400 t distance between columns:1100 mm stroke:250 mm no. of strokes:25 - 75 /min distance table/ram, max. stroke up, adjustment up:900 mm table surface area:1100 x 965 mm capacity of ejector in table:30 t ejector stroke of ejector in table:80 mm capacity of ejector in ram:3 t stroke of ejector in ram:60 / 70 mm ram surface:980 x 800 mm column travel -side:800 mm ram adjustment:20 mm power capacity:80,0 + 5,5 kW weight:47,0 t Dimensions (WxDxH):3,5 x 3,3 x 6,0 m weight of switch cabinet:1,4 t dimensions of electrical cabinet (WxDxH):4,9 x 0,5 x 2,6 m ejector in ram:hydraulic

pressure:400 t distance between columns:1060 mm stroke:450 mm no. of strokes:15 - 30 /min distance table/ram, max. stroke up, adjustment up:1160 mm table surface area:1000 x 700 mm capacity of ejector in table:2 x 16 t ejector stroke of ejector in table:125 mm Die cushion pressure in table:120 t Die cushion stroke in table:2 mm capacity of ejector in ram:2 x 4 t stroke of ejector in ram:100 mm ram surface:1000 x 700 mm column travel -side:630 mm power capacity:55,0 kW weight:50,0 t die cushion in table:2. station

Technical specifications: Cutting width mm: 310 Cutting height mm: 120 Chain width mm: 340 Workpiece length min mm: 700 Saw blade diameter max mm: 360 Feedrate max/min: 5/48 Saw revolutions rpm: 3900 Working height mm: 850 Motor Kw: 37 Weight Kg: 3500

Warehouse No. 8725 Multi-blade saw Paul BK 34/800 Complete cutting system with cross-cut saw Paul GE 20, Cutting saw Paul BK 34/800, multi-blade saw BK 34/800 -Chain conveyor with lifting platform -Cross-cut saw Paul, Type 20 E, YOC 92, 14 kW -Roller conveyor -Conveyor with shortage roller -Ejection station for cuts -Roller conveyor with centering -Separation saw Paul, type BK 34/800, YOC 92, 25 kW -Transverse survey Paul Type AKA, YOC 92 -Frequent leaf saw Paul Type BK 34/800, YOC 92, 75 kW -Security channel -Sorting belt for manual sorting -Stacking system Hydraulic pump 11 kW and miscellaneous 15 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 42 mm Input lengths on the cross-cut saw: 2500 – 5000 mm ...

Multi-blade saw Paul K 34 O Complete cutting system with Paul 18 E cross-cut saw and K 34 O/800 GL multi-blade saw Year of construction: 12/1998 -Chain conveyor with lifting platform -Roller conveyor -Cross-cut saw Paul Type 18 E, 12.5 kW -Conveyor belt -Defect roller -Ejection station for cuts -Waste conveyor belt -Roller conveyor -Centering -Multi-blade saw Paul Type K 34 O/800GL, 90 kW, Working width 800 mm, saw blade diameter. 210 mm, 5200 rpm, Synchronisation machine, shaft diameter 60 mm Drip tray Roller conveyor Hydraulic pump 5.5 kW, Miscellaneous 5 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 50 mm Input lengths on the cross-cut saw: 1000 mm to 5000 mm or more Multi-blade saw: 350 mm to 10 ...

PERFECT MJ145E MULTI 17 multi-saw blade - CE certificate - warranty and post-warranty service chain width 350 mm cutting height 10 - 170 mm max. saw blade diameter Ø 505 mm min. saw blade diameter Ø 355 mm saw sleeve diameter Ø 80 mm main axis diameter Ø 60 mm min. length of the workpiece 740 mm table dimensions 1910 x 790 mm speed 2600 / min feed 2.5-24 m / min. motor of automatic cutting thickness adjustment 0.75 kW feed motor with automatic deceleration in the event of overloads of 4 kW total power 55 kW output for extraction fi 150 x 2 pcs. exhaust air demand 25-35 m / s dimensions (length / width / height) 4460 x 1780 x 1880 mm weight 3500 kg TABLE - feeding and receiving: - optional extra - table length 120 cm

Maka V250 - Multi-blade saw Product name: Multi-blade saw Type: V250 Manafacture: Maka Machine number: 31209 Year of construction: 2010 Condition: used, revised and checked Technical details: - max. cutting thickness: 110 mm - Width of the transport carpet: 250 mm - min. length workpiece: 280 mm (with a special wooden pressure shoe - 1x available as a sample) - Length of the workpieces to be machined: 560 mm - Feed speed of the transport carpet: 0-36 m/min - Max. throughput width: 680 mm - Height of the work table from the floor: 780 mm - Diameter of the suction opening: 250 mm - Weight: approx. 1,700 kg Engine data: - Total power: 18 kW - Voltage: 400 V - Current: 34 A - Speed: 2,930 / 3,515 rpm Machine dimensions/set-up dimensions (L x W x H): 2,750 x 1,790 x 1,850 mm - Number of packaging units: 1 - Weight: approx. 1,700 kg standard accessory: - 1 pie ...

Description: • Multi blade saw, multi rip saw • Serial number 9403896 • Main motor power 22 KW • Table size 1900 x 550 mm • Chain width 250 mm • Blades diameter min/max: 200/330 mm • Max. Workpiece thickness approx. 110 mm • Motorized positioning • Variable feed speed up to 40 m/min Approx. Onsite Dimension. (l x w x h): 2,380 x 1,260 x 1,600 mm, weight approx.: 1,800 kg

Multi-blade saw Cosmec SM 100 Machine No. 2632 Year: 1994 Production COSMEC Italy 22kW (30HP) 380V, 40 Hz Variable speed 5/30 m/min Saw blade min/max 250/300mm Max. cutting depth 100mm Width feed belt/transport chain 250mm Max. distance between 2 saw blades 230mm Minimum workpiece length 600mm Dimensions: 1650x1400x1300 Weight 1300kg

Multi-blade saw Paul Type K 34 G – OU/1200 Specifications: • Working width (mm): 1200 • Total power (kW): 47.6 • Saw shaft top: 1 • Saw shaft bottom: 1 • 5 saw shafts: included • 1 wave car: included • various spacer rings • Top rollers: with PU rubber coating • Bottom rollers: corded • Machine was technically overhauled about 1 year ago by the company Paul

A.Costa 2/SS Multi-blade saw From 1985 12 blades Blade diameter 350 mm Cutting height 120 mm 150 kW

Multi-blade saw Paul type K 34 G 2200 Specifications: • Working width (mm): 2200 • Engine power (kW): 22 • Top rollers: with PU rings • Bottom rollers: corded • Saw shaft: included

Raimann KD31 340/200 double shaft multi-saw blade - German production - year of production 1988 cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, t ...

Multi-blade saw with feed belt, suitable for the very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Power of the main motor : 3 / 4 kW Diameter of the shaft: 30 mm Length of shaft: 400 mm Width of the feed belt: 400 mm Power of the feed motor: 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 300 mm KuSING has been manufacturing woodworking machines since 1991. Machine in stock.