128,657 used machines on RESALE, but how to find them? Machine Search
Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg
Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg
Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg
Saw unit, saw unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit, HOLZ-HER -Engine: H.Hug Type CEI PLF 850 -Power: 2.9 kW -Speed: 2880 rpm -Cutting height: max. 80 mm -Dimensions: see photos -Transport dimensions: 700/630/H780 mm -Weight: 60 kg
Sliding table saw / table saw HOLZKRAFT Minimax SC2C built in 2021, table approx. 90x90 cm, dead weight approx. 315 kg, S/N KK0019659
Cutting depth: approx. 300 mm Foot operation on pallet Auction-ID: A7-45983-54
\"Cutting width: Approx. 750 mm Transport distance: Approx. 1700 mm Saw blade length: 3600 mm Motor power: 1.2 KW\" incl. 15 unused saw blades on pallet Auction-ID: A7-45983-59
Cat. No. 12-1075 in very good condition New price: 2000€ Dimensions and weight: LxWxH: 70 x 48 x 103 cm Weight: 38 kg For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery
Herding® Multicoater Unused New, 3 pieces available e.g. film coats of tablets During the spraying phase, a very fine dust is produced during the film coating of tablets, which is extracted from the fluidized layer into a filter device with a defined air flow. The dust is sticky and without the precoating material forming a protective layer on the filter, the surface would stick very quickly. The Multicoater is a pneumatically operated dosing device and is usually operated with inert gas. It consists of a template container including control and conveying technology and is filled via a loading opening in the housing cover. The dosage is done via an injector pressure pump with a flow rate of 1.3kg/min. The MultiCoater has an internal control system that automatically controls the flow of the fluidizing, conveying and rinsing sequence.
Cat. No. 12-1110 in a very good condition Capacity: 4000 litres/h Pressure: 10 bar Rotating speed: 1425 U/min Original Price: 3000€ Measurements and Weight: LxWxH: 82 x 38 x 105 cm Weight: 63 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Year of construction 2009 like new condition, has worked only sporadically 1 year, Looks machine like new inside The machine is CNC controlled, for the mechanical structuring of thin-film solar cells. The processing heads move over that with a layer of molybdenum metal or other sputtered Glass, with a format 125 x 65 cm, and create an insulating track by material removal. The CNC control controls the movement of the X-, Y-, Z-, A-, and U-axis. all documents, Control Panel, and control are available Original price: 847.000,00 € The complete unit to build a 75MW of production are available. (1 x laser, 2 x mechanical structuring and setting device for needles) Geamt-new value 2.1 mill euro net
1 of used film-only shrink wrapper, make ZVT (KHS), type SP030V, new 2000. Operating side: left. Capacity 30 cycles/minute nominal, 35 cpm in overspeed. Siemens S7 PLC. Indramat EcoDrive servo's. Used for PET bottles in clear and print-registered shrink-wrap film as: 500 ml, D 63.5 x H 230 mm, 3x2=6, dual-lane, 1.000 ml, D 80 x H 281 mm, 3x2=6, dual-lane, and 1.500 ml, D 89 x H 332 mm, 3x2=6, dual-lane. Future option (no parts supplied) was 2.000 ml, D 100 x H 349 mm, 3x2=6 and 2x2=4, dual-lane.
Multi spindle automatic lathe Saeid 13-6 DNT SF Year of construction 1989 Adjustment of speed and cycle time by servo motor Facilities: -Pick-up device with rückw. Editing -Thread cutting gear -Waheed clear text display -pivoting control panels -PLC control etc.
multi spindle automatic lathe Schuette SF 13 built in 1991 - pick up with back side tooling -Thread cutting gear - chip conveyors - PLC control and much more.
Salva Modular deck oven type: UPV CL model: ST85 Ask for further information
CTX Toastmaster Pizza oven stainless two level pizza oven on mobile frame, stainless mesh belt, 450mm wide belt, variable speed, adjustable temp control
Drilling and threaded spindles, with FIBRO round board approx. 800 mm, See pictures
Esterer DKV 1 movable shaft ! feed hydraulically hydraulic and electrically roller lift: hydraulic power: 55 kW Year construction year: approx. 1982 passage: 750mm = width, 160mm = height 2 x directional laser incl. approx. 15 Circularsaws including with Splitter unit screw roll; good
Threaded drilling machine with up to 10 spindles, adjustable drilling pattern
with FESTO rotary table 360 mm numbers of drilling units: 29433, 29616. 29617, 29797 and 29798
Double finisher 842 Multimatic with control year 08/2014, NP 20110 € Wardrobe former and trouser topper rotatable on one column Finishing process in closed cabin Integrated cabin extraction automatically controlled Doors close automatically Flexible processing of different wardrobes and sizes Computer control with nine freely programmable memory slots Air volume regulation for particularly sensitive wardrobe space-saving and almost no loads in the working area due to finishing process extraneous steam heated or fully electric with built-in electric steam generator Are you looking for an all-rounder for jackets & Co? - Multimatic Double Finisher 842 With the Multimatic double finisher 842, jackets, jackets, coats, trousers and the like can be finished automatically. It consists of a shape finisher and a trouser topper. The two devices are rotatable attached to a column. ...
Double finisher 842 Multimatic with control year 09.2006, Np 20110 € Wardrobe former and trouser topper rotatable on one column Finishing process in closed cabin Integrated cabin extraction automatically controlled Doors close automatically Flexible processing of different wardrobes and sizes Computer control with nine freely programmable memory slots Air volume regulation for particularly sensitive wardrobe space-saving and almost no loads in the working area due to finishing process extraneous steam heated or fully electric with built-in electric steam generator Are you looking for an all-rounder for jackets & Co? - Multimatic Double Finisher 842 With the Multimatic double finisher 842, jackets, jackets, coats, trousers and the like can be finished automatically. It consists of a shape finisher and a trouser topper. The two devices are rotatable attached to a column. ...
With its 15 cm clamping range, the Framax multi-function clamp matches the panel size-grid exactly. This means that only one closure is needed per wall plane.
Technical data: -For punching into SCHÃ?CO - profile systems - air consumption per stroke 18 l -Air inlet 8 bar -Space requirement approx. B H 700 x 1250 X 500 mm -Weight approx. 100 kg -with:-foot switch -Original - machine base
Technical data: -maximum working width 750 mm -maximum material thickness approx. 1.0 mm -Beam + upper cheek fold away -Bending rail with cut-outs - space requirement approx. B 1000 x H 1100 x D 750 mm -Weight approx. 70 kg
Concept Laser Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for safe processing of aluminum and titanium alloys etc. External dimensions: 2542 x 1818 x1987 mm (WxDxH) Weight: 2300 kg 2 lasers 400W Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Shielding gas possible through 2 connections for external N2 generators (optional) Build volume 250 x 250 x 280 Layer thickness 20-80μm Production speed 2-20cm³ (depending on material and laser power) Operating conditions 15-35 degrees Celsius Laser service life Laser 1: 501.973 hrs Laser 2: 503.411 hrs Other devices: Lifting device Inox 200 Weight: 102 kg Max lifting capacity 135 kg Protection class IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions: 800x480-570x755-850 mm Drive type: AC Power: 1.25 kw Voltage: 230 V 9.2 A IP65 pro ...
Schuette multi spindle automatic lathe Pour SF 20-6 Curve controlled number of spindles: 6 with mechanical transmission Rod diameter: approx. 20 mm SW 17 mm AK 18 mm UK 14 mm Max bar feeder: 80 /(160) mm Independent longitudinal slide number: 6 Total / working ways (Standart): 63/40 mm "" (Special) to: 100/63 mm Number of independent cross slide: 6 Total / working ways middle and upper carriage up: 32/20 mm Lower carriage up: 40/25 mm Spindle diameter: 224 mm Main time min/max: 0.36/150 sec. Productive time min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 U/min 2. area: 355-2000 U/min Nominal power of the motor: 15 KW Power supply: 50 kVA The drive motor speed: 1500 rpm Length width (standard execution) 3705 1320 mm incl. Rod Guide (standard execution) 6335 mm Approximate weight without rod guide and accessories: 4.6 to. the rod gu ...
8-spindle rotary machine Built in 1989; serie 25 Refurbished in 2012 • New electrics • New bearings • Guided tours • CNC cross slide in position 7 • Spindle stop setup • Material rod guide • Chip conveyor • Pick-up spindle position 8 • Calibration device • Various tool holders • Various curves
Nova BioProfile Flex Automated Cell Culture Analyzer BioProfile is an automated cell culture analyzer that measures up to 15 important cell culture attributes. By combining up to five separate instruments into one easy-to-use instrument, BioProfile FLEX simplifies workflow and saves time, labor, and operating costs compared to multiple instruments. The FLEX automatic sampler takes samples from its two fermenters and transmits them to the measuring unit of the FLEX analyzer. The data obtained from the FLEX autosampler were compared with data taken manually from the reactor and their statistical analysis was performed. Specifications Sample analysis time: 2.5 minutes (gases only – PO 2 + PCO 2 ), 4.0 minutes (Chemistry/Gas and Osmolality), 6.25 minutes (all 15 tests), Operating temperature range: 15-30 °C (59-86 °F), Relative operating temperature Humidity range: 20-85 ...
Table size: 254 x 1100 mm Table movement x: machine. u. v. hand 682 mm Table movement y: hand 380 mm Table movement z: hand 457 mm Milling head swiveling to: +/-90 or +/-45 ° Spindle retainer: ISO 40 Spindle speeds: 70-2300 rpm Quill feeds: 0.038 â 0.152 mm / min Spindle drive: 380 V, 2.2 kW Space: 1600 x 1600 x 2150 mm Weight: 1420 kg
new
Weishaupt Dual Fuel Burner -mu Type WM-GL20/4-A with digital combustion manager WFM Version ZM-R-3LN (SuperLowNox) Power range (N-gas) 300 - 2450 kW Power range (EL) 350 - 2450 kW Fully automatic on the oil side and gas side in a sliding step or modulating depending on the type of power control. Control range on the gas side up to 1:8 possible. Control range on the oil side up to 1:5 possible. for the combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling Frequency converter (included) Combustion air control with drive Fuel system best. made of high-pressure gear pump with Pressure regulating valve, electrosolenoid valves as Quick-closing device nozzle stock and nozzle Magnetic coupling for shutting off the oil ...
320 pieces Multishuttle Dematic DMS2 STATIC Used goods built in 2019, very good condition, see pictures Load capacity: 31.5kg Load types: plastic containers, cartons, trays, containers How it works: Dematic Multishuttle 2 Overview - YouTube Negotiation price: € 2.900,- net ex stock Negotiation price: 1 piece € 5.900,- net/piece from 5 pieces € 4.900,- net/piece from 10 pieces € 3.900,- net/piece from 50 pieces € 2.900,- net/piece Very few hours of operation! Steel construction, rails, etc. available. Dismantling will take place from April to June 2024. Location: Northern Italy. Viewing possible by appointment. Further information on request. Partial sale possible. Systems are professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Assembly and programming can be carried out by partner companies. EVE ...
Type: MZ73031A Number of spindles 3 Distance between first and last spindle 50 mm Adjustable drilling speed Height of the working table 820 mm Table dimensions 735×440 mm Number of clamps 2 Motor power 1,5 kW 400 V Motor r.p.m. 2800 r.p.m Working air pressure 6-8 bar Weight 75 kg Transporting dimensions 900x700x1500 mm
with hood including fan with Gaer schrank 4 herds each 60x80cm long ago any stove with stone slab manual control with fixed water connection for each floor separately Each floor with separate swath box Fermentation chamber control manually Each floor with viewing glass Each floor with lighting Connection per stove 4.65 kW 400 Volt 3/N/PE 50 Hz Furnace is mobile on wheels checked and cleaned The furnace is fully assembled ready for loading in stock.
Used quail Piccolo, 5 floors with fermentation chamber. All floors with separate controls. Fermentation cabinet has 4 editions. 5 floors for 60x80 cm sheets all floors with separate controls Stainless steel clad with hood Fermentation chamber 4 editions for 60x80 cm sheets Dimensions: Height: 240 cm Width: 100 cm Depth: 140 cm Technical data: Year. 03/99 400V - 50 Hz AC/3PH/N/PE
Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1980 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Gv29e0 Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without ro ...
Schuette multi-spindle rotary machine SF 26-6 1980 built -with thread cutting device - prepared for centrage suction system - standard Schuetz control D8gdo29 - mechanical gearbox - Balluff cam switch - standard rod guide
Thread cutting gear Pick-up device partially revised
Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Cmvlgfoyc - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide
Schuette multi-spindle rotary machine SF 50/51-6 Rod turning machine run on schneidoel standart Schuetz control mechanical gearbox Hydraulics integrated into the machine with snail-spaenefoerer
Schuette multi-spindle rotary machine SF 26-6 1984 built - mechanical gearbox - independent feed from the Laengsschlitten Position 4 - Thread cutting gear with thread cutting spindle
Gildemeister 6 Spindle Lathe AS 32-6 - Spindle stop set-up - Pneum pick-up device. - Zubehoer at an extra cost - Cross hole drilling - Thread cutting gears - Thread cutting device - wahlw. Fraeseinrichtung Querschl. - Spaenefoerderer
Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1984 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without rod guide a ...
Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Sowiabeb - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide
Schuette SG 18-6 with gantry loader as feed lathe alternatively conversion possible as a rod lathe, incl. spindle stop setup Location 3+4 with extended stroke CNC cross slide on layer 5 Etc. Machine is ready for use and can be visited under electricity loading device is not currently connected.
Deck Oven Wachtel Piccolo II-3 with Proofer -DMS 3 Master EM - 3 floors - 120cm wide and 80cm deep on each floor - With fixed water connection - each floor is equipped with a separate steam box - Each floor with separate controls - Top and bottom heat can be controlled separately - with proofer - Oven can be moved on castors - Control DMS 3 Master Timer - electr. Connected load 26.9 kW - Each floor with separate 16A CEE plug - 1 floor entrance height is 20cm - 2 floors floor entrance height is 16.5cm - Year of construction 05 / 2013 - External dimensions approx. wide: 156cm Depth: 134cm and 202cm high (height can be adjusted on the roller holder)
Schuette multi-spindle rotary machine SF 26-6 1987 built 6-spindle rod turning machine with hydraulic catch slide prepared for Co2 Loesch plant run with cutting oel Schuetz control mechanical gearbox separate hydraulic unit -- Pick-up device with hydraulic voltage and back-weighing machining without Spaenefoerderer standard pole guide unabhaenger Laengsschlitten feed to position 1,2,4,5 ...
maximum number of results exceeded
please refine your search
1.125 € 
