muller martini press used for sale

Manufacturer: Simmpianti, Year: 1998, Longitudinal through running press: yes, Stages: 1, Work piece width min-max mm: 2700 mm X 3200 mm, Min.-max. workpiece height in mm: 3-80, Press length mm: 3200, Pressing width mm: 2700, Press power kg /cm²: 4-6, Warmwasser beheizt: yes, Feeding: yes, Automatical glue supply: yes, Veneer applicaition table: yes, Through running machine: yes, Destacking: yes, Year :1998

Manufacturer: Sergiani Querdurchlaufpresse Warmwasser, Type: GSA, Year: 2009, Durchlauffunierpresse: yes, Dimensions of heating plate approx. mm: 3500 X 1300, Number of storeys: 1, Cylinder stroke: 350, Charging side: Quer, Landing opening mm: ca.350, Steel heating plates: yes, Min-max temperature: 0-120, Heated by: Warmwasser, Overall pressure kN: ca.4 kg²cm, Press length mm: 3500, Pressing width mm: 1300, Transport roller conveyor: yes, Thermoilpumpenstattion: yes, Lateral press: yes, Belt conveyor: yes, Year :2009

Manufacturer: Istel, Type: Korpussprese Nischen schränke, Year: 1992, Korpuspressen-Montagelinie: no, Work piece width min-max mm: 250-550, Min.-max. workpiece length in mm: 500-2500, Min.-max. workpiece height in mm: 150-350, Working widht max mm: 550, Working width min min mm: 250, Hydraulical/pneumatical: Hydraulisch, Floors and sides: 10 Böden wählbar, Year :1992

- Membrane: PVC, 2019. - Stainless steel cage, semi-perforated - Frame: Made of steel, on castors - Mesh size: Stainless steel, Friedrich connection no. 2 40 - Central filling Dimensions: - Length: 3400 mm - Width: 1750 mm - Height: 2300 mm

Manufacturer: Hess , Type: Centro, Year: 2000, Hydraulical/pneumatical: yes, High / low pressure: yes, Press length mm: 3050, Press height in mm: 2200, Press depth mm: 100, Cylinder vertical: 2, Cylinder horizontally: 2, Vertikaldruckzylinder: 2, Haltezylinder zum Fixieren der Hölzer: yes, Mitteldruckbalken: no, Querdruckeinrichtung: yes, Funk-Handpanel: Handpanell, Elektronische Einzeldruckregelung (zum Verpressen von Kreuzsprossenfenster): yes, Year :2000

LVD brand press - type TPI 80/25 - 80 ton

Manufacturer: Bürkle , Type: S80 2200x1250, Year: 1985, Stages: 3, Lateral press: yes, Dimensions of heating plate approx. mm: 2200 X 1200, Number of storeys: 3, Cylinder stroke: ca.500, Charging side: quer, Landing opening mm: ca.150, Steel heating plates: yes, Heated by: Warmwasser, Rückzylinder N/cm2: ca. 4, Number of pressing cylinders: 4, Longitudinal through running press: 2200, Time switch: 1200, Year :1985

Operating pressure: 2800 bar, Flow rate: 27 l/min, Drive: Volvo Diesel, 160 kW, Operating hours: approx: 350h Trailer, incl. accessories,

Manufacturer: Bürkle, Type: U110 , Year: 1990, Stages: 3, Lateral press: yes, Heizplattenmasse ca.mm: 3000x1300, Anzahl der Etagen: 3, Zylinderhub mm: ca.400, Beschickungsseite: längs, Landing opening mm: ca.100, Heizplatten aus Stahl: Stahl-Aluminium, Temperatur min-max: 150, Heated by: Warmwasser, Gesamtdruck KN: 1100, Anzahl der Presszylinder: 8, Time switch: yes, Press length mm: 3000, Pressing width mm: 1300, Year :1990

Punching press with coil and strip bar processing Manufacturer: HMS Model: EWZ 03 Year of Manufacture: 1990 Type of Machine: Punching Line Operating Voltage : 380 V Find more here - / Contact us at -

Manufacturer: Wemhöner Membranenpresse, Year: 1996, Type: KT-VP 28, Number of tables: 1, Automatisches Rüsten: no, Pin-Sytem: no, Heating system: Elektro, Nutzfläche : 2500 X 1300, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10--60, Working widht max mm: 1300, Press length mm: 2500, Pressing width mm: 1350, Kw Heizleistung obere Heizplatte: yes, Max. temperature °C: 220, Foil magazin spaces: 8, Veneer/ foil thickness max mm: möglich, Through running machine: yes, Folienpaternoster: yes, Through running machine: yes, Year :1996

Manufacturer: Friz, Year: 1996, Type: MFP 12 Masterform, Number of tables: 1, Heating system: elektrisch, Nutzfläche : 1.100 x 2.400, Press length mm: 1.400, Pressing width mm: 2.700, Work piece thickness max mm: 300, Membrane: yes, Kw Heizleistung obere Heizplatte: oben 24 + unten 11, Membrane: yes, Size of heating plate mm: 1.400 x 2.700, Pressing cylinder: 6, Landing opening mm: 315, Overall pressing pressure kN: 320 bar, Weight approx. kg: 20.000, Year :1996

Manufacturer: Itallpress, Type: GL 120, Stages: 1, Heizplattenmasse ca.mm: 500 X 1200, Anzahl der Etagen: 1, Zylinderhub mm: 310, Beschickungsseite: quer, Landing opening mm: 320, Heizplatten aus Stahl: yes, Temperatur min-max: ca.140, Heated by: Elektro, Spezifischer Druck: 400 Tonnen, Press length mm: 1200, Pressing width mm: 500, Number of cylinders: 4 /Durchmesser 150, Zykluszeit mm: 320, FREE TEXT: Verlademasse 1200 X 2100 X 2870 mit Ölbehälter 24000 ohne Behälter/Hydraulik Kw 5,5,

Manufacturer: Sergiani, Type: LAS 230, Year: 1999, Stages: 10, Heizplattenmasse ca.mm: 2500x1300, Anzahl der Etagen: 10, Heated by: Warmwasser, Press length mm: 2500, Pressing width mm: 1300, Press power kg /cm²: 7,69, Electrically heated kW: 21, Work piece thickness max mm: 80, Year :1999

1- one combination of lay-up, turning and unloading 2- BTF Multifoiler 3- Multi-Pin-System Useful area 1330x2630 mm Max size of board 1250x2550 mm Min foil width 1400 mm

Manufacturer: unbekannt, Type: Rahmenpresse, Min.-max. workpiece length in mm: 150-2500, Min.-max. workpiece height in mm: 10-40, Working widht max mm: 2500, Hydraulical/pneumatical: pneumatisch, High / low pressure: niederdruck, Cylinder vertical: 4 pro Seite, Cylinder horizontally: keine, Vertikaldruckzylinder: 8, Clamping: no, FREE TEXT: Zylinderdurchmesser 70/ Zylinderhub 100 mm,

Manufacturer: Italpresse, Year: 2005, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: 2, Size of heating plate mm: 1450 x 2800, Pin system: no, Multifunktionsrahmen: yes, Automatical glue supply: yes, Year :2005

ZM testing equipment

Manufacturer: Comil, Type: Astro 700, Year: ca.1990, Hochschränke und Hänger: 680, Work piece width min-max mm: 300 - 2500, Min.-max. workpiece length in mm: 300 - 1300, Min.-max. workpiece height in mm: 800, Working width min min mm: yes, Hydraulical/pneumatical: yes, Min.-max. pressing length in mm: 1300, Cylinder horizontally: no, Pre-assembling conveyor: 22,5, Feeding speed continous adjustable: jyes, Discharge belt roller conveyor height: 7, Machine rigging: 2860, Press power kg /cm²: 7500, Year :ca.1990

Manufacturer: Italpresse, Year: 2000, Type: Lock Form SS AIR , Control: 1330, Number of tables: 2680, Automatisches Rüsten: 55, Work piece width min-max mm: elektrisch, Min.-max. workpiece height in mm: 150, Press length mm: 2, Membrane: 1450 x 2800, Foil magazin spaces: no, Foil types: yes, Brushing machine: yes, Year :2000

Max pressure: 150 ton Table size: 620 x 600 mm Between columns: 620 mm Lower and upper table are heated Max temperature: 200° C Weight: 8 ton

Manufacturer: Comil, Type: Astro 700, Year: 1990, Work piece width min-max mm: 680, Min.-max. workpiece length in mm: 300 - 2500, Min.-max. workpiece height in mm: 300 - 1300, Working widht max mm: 800, Hydraulical/pneumatical: yes, High / low pressure: yes, Min.-max. pressing height in mm: 1300, Pre-assembling conveyor: no, Feeding speed max m/min: 22,5, Glazing tape: jyes, Connected load in kW: 7, Machine height mm: 2860, Machine width mm: 7500, Year :1990

Manufacturer: Wemhöner, Year: 1997, Type: KTV 28/15 - 165, Work piece width min-max mm: 1500, Min.-max. workpiece length in mm: 2800, Min.-max. workpiece height in mm: 10-40, Max. temperature °C: 90 / 180, Placing table: yes, Through running machine: yes, Pressing cylinder: 6, Pin system: no, Landing opening mm: 1, Foil cutter: yes, Through running machine: yes, Year :1997

Max pressure: 120 ton Table size: 450 x 500 mm Between columns: 450 mm Lower and upper table are heated Max temperature: 200° C

Manufacturer: Italpress, Type: GL 260 PS 5, Stages: 1, Lateral press: yes, Anzahl der Etagen: 1, Zylinderhub mm: 450, Beschickungsseite: Quer, Heizplatten aus Stahl: yes, Heated by: Elektro, Spezifischer Druck: 700 Tonnen, Anzahl der Presszylinder: 5/Durchmesser 300 mm, Schliessgeschwindigkeit mm./Sek: 2 Stufig, Press length mm: 1600, Pressing width mm: ca.600, Press power kg /cm²: 40-50,

2 presses Max pressure: 50 ton Table size: 400 x 500 mm Between columns: 400 mm Lower and upper table are heated Max temperature: 200° C

Manufacturer: Himmel Hochfrquenz Presse, Year: ca.1993, Work piece width min-max mm: 20-150, Min.-max. workpiece length in mm: egal, Min.-max. workpiece height in mm: 6-40, High / low pressure: yes, Vertikaldruckzylinder: yes, Horizontaldruckzylinder: yes, Haltezylinder zum Fixieren der Hölzer: yes, FREE TEXT: Hofrequenz für Rahmenteile, Year :ca.1993

2 presses Max pressure: 60 ton Table size: 350 x 350 mm Lower and upper table are heated Max temperature: 200° C

Manufacturer: Italpresse, Year: 2002, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: yes, Size of heating plate mm: 1450 x 2800, Pressing cylinder: 2, Pin system: yes, Automatical glue supply: yes, Year :2002

Max pressure: 250 ton Table size: 620 x 600 mm Between columns: 620 mm Max opening: 500 mm Lower and upper table are heated Max temperature: 200° C Height: 2600 mm Weight: 6 ton

Manufacturer: Igomak, Type: T 450, Year: 1976, Hydraulical/pneumatical: Hydraulisch, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Zylinder 180 mm Durchmesser, FREE TEXT: Heizplatte oben/ 7,5 Kw Leistung, Year :1976

2 presses Max pressure: 120 ton Table size press left: 450 x 450 mm Between columns: 450 mm Max open: 285 mm Table size press right: 480 x 500 mm Between columns: 480 mm Lower and upper table are heated Max temperature: 200° C Weight: 5 ton

Manufacturer: Dimter , Type: Profipress 3500, Year: 2003, Continuous flow system: yes, Work piece width min-max mm: 300 - 3500, Min.-max. workpiece length in mm: 1300, Min.-max. workpiece height in mm: 11 - 60, Hydraulical/pneumatical: yes, High-frequency: yes, Warm water: yes, Thermoöl: yes, High / low pressure: yes, Cylinder vertical: yes, Cylinder horizontally: yes, Pre-assembling conveyor: yes, Glue application machine: yes, Clamping: yes, Disc saw transverse: yes, FREE TEXT: 2800 Betriebsstunden, Year :2003

Manufacturer: Italpress, Type: Mark/C, Year: 2000, Program: yes, Control: Siemens, Longitudinal through running press: yes, Stages: 1, Press length mm: 3400, Pressing width mm: 1200, Press power kg /cm²: 6, Zylinder: 8, Inlet conveyor: yes, Warm water heated: yes, Work piece thickness max mm: 100, Through running machine: yes, Belt conveyor: Auslauf, Year :2000

Max pressure: 120 ton Table size: 500 x 500 mm Between columns: 500 mm Lower and upper table are heated Max temperature: 200° C Weight: 3 ton

Manufacturer: Imotech, Type: IMO 324, Year: 1997 ca., Body presses assembly line: yes, Work piece width min-max mm: 650, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 2000, Pre-assembling conveyor: 3 m, Glazing tape: 3 m, Press: IMO 324, FREE TEXT: einschl. Puffer, Querförderer und Rückführung , Year :1997 ca.

Max pressure: 150 ton Table size: 500 x 500 mm Between columns: 500 mm Lower and upper table are heated Max temperature: 200° C Weight: 4,5 ton

Manufacturer: Limatech, Type: MPS 20, Year: 1998, Work piece width min-max mm: 800, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 1300, Feeding speed max m/min: ca. 30, Feeding speed continous adjustable: yes, Machine rigging: automatisch, Compressed air bar: 6, Wight approx. kg: 3000, Year :1998

Max pressure: 400 ton Table size: 1000 x 650 mm Between columns: 1000 mm Lower and upper table are heated Max temperature: 200° C Height: 2600 mm Weight: 9 ton Capacity: 400 ton

Manufacturer: Hess, Type: Speedy Quick Step, Year: 1995, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 2500, Working widht max mm: 600, Hydraulical/pneumatical: hydraulisch, High / low pressure: Hochdruck, Cylinder vertical: 3, Cylinder horizontally: 2, FREE TEXT: Automatisches Verfahren der Balken und Lanhhubzylinder für vertikale Bewegung, Year :1995

Sales are made on behalf of the customer

Manufacturer: Homburg, Type: Korpusspresse, Year: ca.1980, Work piece width min-max mm: 250-600, Min.-max. workpiece length in mm: 300-3500, Min.-max. workpiece height in mm: 400-1500, Hydraulical/pneumatical: Pneumatisch, Cylinder vertical: 4, Cylinder horizontally: 2, Machine rigging: hand, Year :ca.1980

SPECIFICATIONS: Briquettes: Ø 60 mm Production: 70 kg/h Installed power: 7.5 kW EQUIPMENT: 1 mini silo

Manufacturer: Metapress, Year: 2008, Min.-max. workpiece length in mm: 300-1200, Min.-max. workpiece height in mm: 300-600, Hydraulical/pneumatical: Pneumatisch, High / low pressure: Niederdruck, Cylinder vertical: yes, Cylinder horizontally: yes, Inserted table: yes, Press power kg /cm²: 2, Wight approx. kg: 700, Year :2008

with additional vacuum insert (sack)

110 Tons Press Machine 70-55 table size, 48-33 between colons with PLC Hydrolic

Manufacturer: Bürkle, Year: 1997, Type: BTF 1426, Work piece width min-max mm: 1100, Min.-max. workpiece length in mm: 2350, Min.-max. workpiece height in mm: 6-35, Working widht max mm: 1180 X 2430, Heating system: Thermoöl, Heating power in kW: 25, Foil magazin spaces: 10, Placing table: 3, Through running machine: yes, Folienschneideeinrichtung: yes, Through running machine: yes, Year :1997

Find more here - / Contact us at -

Manufacturer: Mepac , Type: 20-18S, Year: ca.2002, Control: Programm, Hydraulikal power kW: 4, Ballenpresse: yes, Pressdruck kN/ to: 18 to, Einfüllöffnung b x h x L mm: 1080620980, Zylinderhub/Zycluszeit mm/ sec: 715/25, Ballenmass b mm x l mm x h mm : 1100700800, Ballengewicht kg: 150-250, Ballen 80 - 230 kg , Year :ca.2002

For Sale: Hammelmann Aquajet 204 High-Pressure Pump Unit – Demo Model Model: Aquajet 204 Machine No.: C5.02204.1617 Year: 2025 Engine Power: 200 kW - 2150 RPM Pressure Rating: Up to 2800 bar - 40 l/min Plunger Diameter: 20 mm Oil Type: PAO ISO VG 320 Oil Quantity: 12.5 litres Condition: Demo model – very well maintained Current Hours: Approx. Less than 500 (still in use; hours may increase) Crankcase: Filled with high-quality synthetic oil (Shell Omala S4 GX 320) This unit is ideal for hydrodemolition, surface preparation, industrial cleaning, and other ultra-high-pressure applications. Still in operational use and available for inspection.