128,004 used machines on RESALE, but how to find them? Machine Search
Pressure:600 t distance between columns:2600 mm stroke:900 mm Distance table/ram, max. stroke up, adjustment up:1600 mm Table surface area:2500 x 1730 mm pressure of drawing cushion in table:250 t Die cushion stroke in table:400 mm Die cushion area in table:2300 x 1300 mm Die cushion pressure in ram:63 t Die cushion stroke in ram:160 mm Die cushion area in ram:1900 x 1300 mm Ram surface:2500 x 1730 mm Side window:1100 mm Oil volume:3500 l Power capacity:200,0 kW Dimensions (WxDxH):4,1 x 2,8 x 9,6 m Height above floor:6,4 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact absorption:hydraulic
Pressure:800 t distance between columns:3550 mm stroke:1100 mm Distance table/ram, max. stroke up, adjustment up:1900 mm Table surface area:3500 x 1800 mm pressure of drawing cushion in table:350 t Die cushion stroke in table:280 mm Die cushion pressure in ram:80 t Die cushion stroke in ram:160 mm Ram surface:3500 x 1800 mm Side window:1900 mm Weight:100,0 t Floor Space (WxD):5,3 x 4,3 m Height above floor:7,3 m Height below floor:5,0 - 6,0 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact cushioning:hydraulic sliding table:without rails for moving table
Pallets chain segment with duplex chain for transverse with SEW drive 4 lines L 3000 3 pallet transverse 3250,- 4 lines L 2100 2 pallet transverse 3050,- 4 lines L 1300 for 1 pallet transverse 2850,- 3 lane L 3000 3 pallet transverse 2960,- 3 lane L 2100 2 pallet transverse 2760,- 3 lane L 1300 for 1 pallet transverse 2560,- Altitude 600 mm +/-100 mm Base in painted version, V SQM A version for an additional fee
New machine editing by: wood, plastic, PVC, Fiberglass, Plexiglas, non-ferrous metals such as aluminum, brass, etc. Technical data: Auflöstung: 0,0018 mm X-Y-Z of precision trapezoidal thread spindles 12 x 3 mm All drive spindles are without triple play ball bearings Table size: 506 mm x 320 mm Traverse paths: x 215 mm, y 375 mm, z approx. 90 mm Passage about 78 mm Prices and further sizes on request
Kettenstemmer Müller Wall mounting L x W x H: 60 x 40 x 170 cm Weight approx. 270 kg Built in 1973 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
English: Model: MB12 Bucket capacity - 0.022 m³ Chassis width - 930 mm Track length - 1200 mm Chassis ground clearance - 370 mm Gradeability - 30° Track width - 180 mm Tank volume - 5.5 L Transport length - 2870 mm Excavator height - 2285 mm Overall dimension - 2870 x 930 x 2285 mm Engine model - Koop 192F / Kubota D722 Engine power - 7.6 kW / 2400 rpm; 10.2 kW; 10 kW / 420 cc Turning radius - 1490 mm Max. digging height - 2490 mm Max. dumping height - 1745 mm Max. digging depth - 1725 mm Max. digging radius - 3030 mm Max. vertical digging depth - 1655 mm Bucket digging force - 6.5 kN Operating weight - 1200 kg All machines are new and come with a one-year warranty. Additional attachments such as rakes, augers, buckets, or grapples can be added to your order if needed. You can choose from a variety of engines that vary in size and power accor ...
English: The MB 10-B is our most compact and lightweight model—ideal for projects requiring maneuverability in tight urban spaces or residential backyards. With a sturdy build and precise controls, it's a favorite for small-scale landscaping and trenching. Despite its compact frame, it offers impressive digging force and a smooth, reliable experience. Technical Specifications Weight: 1000 kg Dimensions: 2870 x 930 x 2213 mm Standard Bucket Capacity: 0.022 cbm Engine: KOOP 192 / Briggs & Stratton Power Output: 11.7 hp / 8.6 kW or 13.5 hp / 10.07 kW Issue Rating: EURO V Displacement: 0.499 / 0.794 L Cooling Method: Air-cooled Max. Digging Depth: 1720 mm Bucket Digging Force: From 6.5 kN Hydraulics: Permco TJ Gradeability: 30°
At the top of the line, the MB 20 is built for professionals who require serious performance. With the highest digging depth and force in the series, it's perfect for commercial applications. Its larger frame provides superior gradeability and traction, making it ideal for varied terrain and extended operations. Weight: 2000 kg Dimensions: 3110 x 1250 x 2280 mm Standard Bucket Capacity: 0.040 cbm Engine: Laidong 385 / Kubota D722 Power Output: 25 hp / 18 kW or 16.4 hp / 12.2 kW Issue Rating: EURO V Displacement: 1.617 / 0.719 L Cooling Method: Water-cooled Max. Digging Depth: 2050 mm Bucket Digging Force: From 10 kN Hydraulics: Permco TJ Gradeability: 35°
The MB 25 is where compact design meets elevated performance. With increased digging power and bucket capacity, this machine thrives in both urban projects and light commercial work. Its balanced weight and enhanced gradeability ensure stability and traction even on uneven terrain, while maintaining a compact form ideal for maneuvering in tight spaces. Weight: 2000 kg Dimensions: 3110 x 1250 x 2280 mm Standard Bucket Capacity: 0.040 cbm Engine: Laidong 385 / Kubota D722 Power Output: 25 hp / 18 kW or 16.4 hp / 12.2 kW Issue Rating: EURO V Displacement: 1.617 / 0.719 L Cooling Method: Water-cooled Max. Digging Depth: 2050 mm Bucket Digging Force: From 10 kN Hydraulics: Permco TJ Gradeability: 35°
The MB 35 takes operator efficiency and machine durability to the next level. With a robust chassis, high torque capacity, and superior arm force, it's tailored for demanding commercial work. From site prep to demolition, this machine handles heavier tasks with ease—offering a professional-grade experience packed into a versatile compact frame. Weight: 3500 kg Dimensions: 4180 x 1500 x 2300 mm Standard Bucket Capacity: 0.100 cbm Engine: Xinchai 490 / Kubota V1505 Power Output: 27.4 hp / 36.8 kW or 33 hp / 26.5 kW Issue Rating: EURO V Displacement: 2.67 / 1.498 L Cooling Method: Water-cooled Max. Digging Depth: 2500 mm Bucket Digging Force: 22 kN Hydraulics: Permco TJ Gradeability: 35°
The flagship of the lineup, the MB 40 delivers top-tier performance for high-demand job sites. Built for heavy-duty excavation, this model features exceptional digging force, unmatched gradeability, and premium operator comfort. It's ideal for contractors who need the strength of a full-sized excavator in a more compact, easily transportable unit. Weight: 4000 kg Dimensions: 4400 x 1600 x 2300 mm Standard Bucket Capacity: 0.700 cbm Engine: Xinchai 490 / Kubota V1505 Power Output: 27.4 hp / 36.8 kW or 33 hp / 26.5 kW Issue Rating: EURO V Displacement: 2.67 / 1.498 L Cooling Method: Water-cooled Max. Digging Depth: 2650 mm Bucket Digging Force: 55 kN Hydraulics: Permco TJ Gradeability: 35°
With a robust operating weight of 8,500 kg, the RB 85 offers greater lifting capacity and stability while maintaining the speed and efficiency of a road-ready machine. Operating Weight: 8,500 kg Engine: Yuchai YC4DK85-T300, EURO V Power Output: 62.5 kW / 85 HP at 2200 rpm Max Torque: 340 Nm at 1400–1700 rpm Displacement: 3.6 L Hydraulic System: Lonking main valve + swing motor Hydraulic Flow: Up to 30 L/min Controls: Hydraulic-electric joysticks Tires: 8.25-16 heavy-duty pneumatic tires Drive: 4-wheel drive (with optional differential lock) Max. Travel Speed: 28 km/h Max. Digging Depth: 3556 mm (depending on boom config) Cabin: Fully enclosed with ergonomic seat, climate control, and wide visibility Swing Speed: 9 rpm Attachment Interface: Quick coupler standard; supports hydraulic hammers, augers, grapples, and more
The RB135 and RB 150 are wheeled excavators engineered for high-efficiency digging and utility work in urban and semi-urban environments. Operating Weight: 15,000 kg or 13,500 kg Engine Options: Kubota V5009-T or Yuchai YC4D115 (EURO V) Power Output: Up to 157 HP (Kubota) or Up to 115 HP (Yuchai) Max Torque: Approx. 600 Nm at 1500 rpm (Kubota) or Approx. 380 Nm at 1700–2000 rpm (Yuchai) Displacement: 5.0 L (Kubota) / 4.2 L (Yuchai) Hydraulic Pump: Kawasaki PNM variable axial piston pump Hydraulic Valve: Parker high-performance control valve Swing Engine: Sunjin (South Korea) Tires: 9.00-20 industrial-grade tires Controls: Hydraulic-electric joysticks Cabin: Enclosed with heating, ventilation, and ergonomic seating Hydraulic Flow: High-capacity system for powerful attachments Max Travel Speed: Up to 30 km/h Max Digging Depth: Approx. 4,750 mm (d ...
Complete gate line , with log task - Remote controlled clamping car - Gate Müller with sideware crosscut saw, complete mechanization, cut saw Paul S900 SH 180 mm, sour paul KME II /1000, chopping system Rudnick&Enners 200/600 etc...
The GB 180 crawler excavator is engineered for serious excavation, lifting, and heavy-duty operations. Operating Weight: 18,000 kg Engine: Cummins QSF3.8 (EURO-compliant) Power Output: 93 kW (125 HP) at 2200 rpm Hydraulic Pump: Hengli high-pressure hydraulic pump Control Valves: Husco precision control valves Swing Engine: Eaton or Sunjin (Korea) Traveling Motor: Eaton or PMP Hydraulic System Pressure: 28 MPa Bucket Capacity: 0.8 m³ Bucket Digging Force: 98 kN Arm Digging Force: 68 kN Swing Speed: 0–12 rpm Travel Speed: 2.8–4.2 km/h Gradeability: 30° Overall Length: 8,540 mm Overall Width: 2,720 mm Overall Height: 2,920 mm Undercarriage Width: 2,720 mm Ground clearance: 480 mm Track Width: 600 mm Maximum Digging Radius: 8,985 mm Maximum Digging Depth: 5,975 mm Maximum Digging Height: 9,430 mm Maximum Dumping He ...
Operating Weight: 23,000 kg Engine: Cummins QSB7 (EURO V compliant) Power Output: 124 kW (166 HP) at 2050 rpm Hydraulic Pump: PNM high-performance pump Control Valves: Parker hydraulic control valves Swing Engine: Sunjin (Korea) Traveling Motor: Doosan Hydraulic System Pressure: 34 MPa Bucket Capacity: 1.1 m³ Swing Speed: 0–13 rpm Traveling Speed: 3.8–4.2 km/h Gradeability: 30° Maximum Digging Radius: 9.936 mm Maximum Digging Depth: 6,550 mm Maximum Digging Height: 9,680 mm Maximum Dumping Height: 6,730 mm Overall Length: 9,565 mm Overall Width: 2,990 mm Overall Height: 3,000 mm Track Width: 600 mm Track Height: 950 mm
High-performance milling spindle, unused high speed milling spindle, unused Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim FS 40-10-30-4- AOW B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40 Power 16 kW Torque: 30 Nm
High-performance milling spindle, unused high speed milling spindle, unused high speed milling spindle, unused/new Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim FS 40-10-30-4- AOW B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40 Power 16 kW Torque: 30 Nm
New: MB 12 - SH | 1.2 Ton Mini Excavator | with Warranty Location: Poland | Availability: Pre-order Product Overview: We offer the MB 12 - S|H, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: open Technical Specifications Engine: Co-op D192F Power: 7.6 kW / 10.3 HP at 3,000 rpm Torque: 25.5 Nm at 2,880 rpm Fuel consumption: 275–280 g/kWh Cooling: Air-cooled Fuel type: Diesel Number of cylinders: 1 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working pressure: 160 ...
NOW IN STOCK: New MB 12 - SH | 1.2 Ton Mini Excavator | With Warranty Location: Poland | Availability: In stock Product Overview: We offer the MB 12 - SH, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping and light construction work. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: open Technical Specifications Engine: Co-op D192F Power: 13.4 kW / 18 HP at 3600 rpm Torque: 43 Nm at 2600–2800 rpm Cooling: Water-cooled Fuel type: Diesel Number of cylinders: 3 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working pre ...
New MB 12 - SH | 1.2 Ton Mini Excavator | With Warranty Location: Poland | Availability: Production machine Product Overview: We offer the MB 12 - KSH, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping and light construction work. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: Closed Cabin Technical Specifications Engine: Co-op D192F Power: 13.4 kW / 18 HP at 3600 rpm Torque: 43 Nm at 2600–2800 rpm Cooling: Water-cooled Fuel type: Diesel Number of cylinders: 3 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working ...
The MF20 diesel forklift with a load capacity of 2 tonnes is not only compact, but also powerful and versatile – perfect for warehouses, industry and construction sites. Equipped with a reliable Kubota diesel engine, it meets the highest efficiency and environmental standards. It also comes with a 12-month warranty or 1000 hours of use, giving you maximum peace of mind. Specifications: - Engine: Kubota V2607-CR-E5B - Power: 38 kW (50.9 hp) at 2400 rpm - Torque: 174.1 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 2,615 L - Fuel tank: 60 L - Transmission: 1-1 Powershift - Load capacity: 2000 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1070 x 100 x 40 mm - Total weight: 3320 kg - Vehicle width: 1170 mm - Total length with fork: 3572 mm - Total length without fork: 2502 mm Tyres: - Front: 7.00-12-12PR - Rear: 6.00 ...
CNC Engraving Machine MÜLLER LCF - 2 Travel: X 375 mm Y 570 mm Z 90 mm Technical0.321020121002 Data: Table size 700 mm x 480 mm Weight: 50 kg Exterior dimensions: Length: 700 mm Width: 500 mm Height: 350 mm Accessories: Computer Screen Keyboard Mouse Software Control Kress cutter Vacuum pump Valve Spray Mist With this, versch. Collet and cutter - NEW
Diesel forklift with 2000 kg load capacity convinces with its stable construction, a powerful Xinchai industrial engine and high flexibility of use. Equipped with 1070 mm forks, 3 m lifting height and precise control, this model is perfect for demanding transport tasks indoors and outdoors. Immediately available and CE certified. We have a wide range of diesel, electric, gas and all-wheel drive forklifts from 1 to 10 tonnes - enquire directly, we will advise you competently and without obligation! Technical details - Load capacity: 2000 kg - Load center of gravity: 500 mm - Free lift: 150 mm - Engine: Xinchai / Quanchai 4D27G31 (490) - Power: 40 kW at 2500 rpm - Torque: 157 Nm at 1800 rpm - Propulsion: Diesel - Travel speed (loaded/unloaded): 17 / 19 km/h - Lifting speed (loaded/unloaded): 530 / 550 mm/s - Gradeability (loaded/unloaded): 20 / 21 % - Net weight: 3320 kg ...
Diesel forklift with a load capacity of 2500 kg combines a powerful Xinchai industrial engine with a stable construction - ideal for warehouses, industry and daily continuous use. With 1070 mm long forks, a lifting height of 3 meters and sensitive joystick control, loads can be moved safely and precisely. CE certified and ready to use. In addition, we offer diesel, gas, electric and all-wheel drive forklifts from 1 to 10 tonnes – make a non-binding enquiry now and get personal advice! Specifications - Load capacity: 2500 kg - Load center of gravity: 500 mm - Free lift: 150 mm - Engine: XINCHAI / QUANCHAI 4D27G31 (490) - Power: 40 kW at 2500 rpm - Torque: 157 Nm at 1800 rpm - Drive type: Diesel engine - Max. travel speed (loaded/unloaded): 17 / 19 km/h - Max. lifting speed (loaded/unloaded): 530 / 550 mm/s - Max. climbing ability (loaded/unloaded): 20 / 21 % - Total w ...
Diesel forklift with a load capacity of 3000 kg combines powerful Xinchai engine power with a stable construction - ideal for use in warehouses, on construction sites or in industry. Thanks to 1070 mm long forks, 3 m lifting height and sensitive joystick control, you can carry out precise lifting and transport tasks effortlessly. CE certified and available for immediate delivery. In addition to this model, we also carry diesel, electric, gas and four-wheel drive forklifts in all size classes from 1 to 10 tonnes. Enquire now – we will advise you individually! Specifications - Load capacity: 3000 kg - Load center of gravity: 500 mm - Free lift: 160 mm - Engine: XINCHAI / QUANCHAI 4D27G31 (490) - Power: 40 kW at 2500 rpm - Torque: 157 Nm at 1800 rpm - Fuel: Diesel engine - Max. travel speed (loaded/unloaded): 18 / 19 km/h - Max. lifting speed (loaded/unloaded): 440 / 480 ...
Diesel Industrial Forklift with a payload of 3500 kg combines reliable diesel power with a durable construction – perfect for warehouse work, field work on construction sites and industrial transport tasks. Equipped with 1070 mm long forks, approx. 3 m lifting height and precise joystick control, it masters even complex tasks with ease. CE-compliant and immediately available from stock. Whether diesel, gas, electric or all-wheel drive forklifts – we carry models from 1 to 10 tonnes. Contact us for a personal consultation! Specifications - Load capacity: 3500 kg - Load center of gravity: 500 mm - Free lift: 160 mm - Engine: XINCHAI / QUANCHAI 490 - Power: 40 kW at 2500 rpm - Torque: 157 Nm at 1800 rpm - Fuel: Diesel engine - Max. travel speed (loaded/unloaded): 19 / 19 km/h - Max. lifting speed (loaded/unloaded): 330 / 370 mm/s - Max. climbing ability (loaded/unloade ...
Diesel forklift 4000 kg strong convinces with its powerful Xinchai industrial engine and a particularly stable design - ideal for daily use in industry, logistics or on construction sites. With 1070 mm long forks, about 3 m lifting height and sensitive joystick control, it is the perfect solution for precise work in the toughest conditions. CE certified and immediately available from stock. Whether diesel, electric, gas or all-wheel drive forklifts – you will find a wide range of models from 1 to 10 tonnes. Send an inquiry now – we will advise you individually! Specifications - Load capacity: 4000 kg - Load center of gravity: 500 mm - Free lift: 160 mm - Engine: XINCHAI / QUANCHAI 495 - Power: 48 kW at 2500 rpm - Torque: 187 Nm at 1800 rpm - Fuel: Diesel engine - Max. travel speed (loaded/unloaded): 19 / 19 km/h - Max. lifting speed (loaded/unloaded): 340 / 380 mm/s ...
cross-section width:: 5 Schläuche 3-5 mm cross-section heigth:: 3 - 20 mm feed:: 1,5 - 50 mm Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.: ...
optical angel measuring unit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 850 mm turning length: 2000 mm turning diameter over slide rest: 690 mm control: Siemens type: 840 C Cooling through the spindle: 23 bar centre height: 450 mm spindle diameter in front bearing: 200 mm spindle hollow: 128 mm power capacity: 60 kW turning speeds: 7-1800 U/min Torque: 7908 Nm workpiece weight: 4000 kg tailstock quill diameter: 160 mm tailstock quill taper MT: 5 3 jaw chuck Forckrath: 600 mm Tool changer: 60 work piece power: 30 kW turning speeds: 56-3000 U/min total power requirement: kW weight of the machine ca.: 18 t dimensions of the machine ca.: 6,3x2,4x3,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Perfectbinding line Acoro A7, 16 Station gathering machine type 1571, machine number NN31846/FE1193085, Tensioning element with hand feeding unit, Asir 3, 2 Vacuum pumps, Inhouse blowair, Spiral raceway type 3635 machine number MMFE1237011/75, MM3643, criscross delivery, intermididate element, MM 3642 Book block feeder,Endsheet-tipping element MMFE 1237011/ MNEZ1217462, MM 3648, Acoro A7 28 clamps perfectbinder, Main milling station, Roughening and notching station, Hotmelt spine glue unit, hotmelt side glue unit, Additional PUR spine glue unit, Hotmelt Premelter C80 for spine glue, Hotmelt premelter for side glue, Premelter for PUR spine glue, Pile cover feeder, Ansi water scorring, Scorring system, Double nipping station, Laydown system, MM drying conveyor system approx 50 meter, Reject gate, Muller martini 3671 Three knife trimmer Merit S year 2007 Machine number 1237011 MMEZ 1247462 ...
Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pd-MU 3x690 V 50 Hz 2000/1 A-1-0-+3 MW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg
Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 20 kV/100 V 120/1 A 4.156-0-4.156 MW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg
Measuring transducers, power measuring transducers, real power measuring transducers -Manufacturer: Muller Ziegler, transmitter -Type: Pdr-MU 30 kV/100 V 50 Hz 150/1 A 500-0-7500 kW -Price: per piece -Number: 2 pieces -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece
Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 690/400 V 50 Hz 150/1 A 0-150 kW -Number: 4x devices available -Price: per piece -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece
Measuring transducers, power measuring transducers, real power measuring transducers -Manufacturer: Muller Ziegler, transmitter -Type: Pdr-MU 575/332 V 50 Hz 3000/1 A 500-0-3000 kW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg
Grinding range: approx. 130 x 255 mm Grinding speed: 2800 rpm Table size: 150 x 300 mm Drive motor: 380 V, 1.5 kW Space requirement: 750 x 700 x 1700 mm Weight: approx. 380 kg Pot disc Ø: 180 mm
NH fuse -Type: HLS 00 -50 A 500 VAC -Price: per package of 3 fuses -12x packages: 3 pieces each -Weight: 0.6 kg per package
Gear motor, electric motor, electric gear motor -Manufacturer: Müller & Georg, geared motor type ZGO G3 K 4 -Speed: 160 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 22 x 50 mm -Protection rating: IP 54 -Dimension: 450/158/H205 mm -Weight: 14.8 kg
NH fuse switch disconnector -NH2-400 A -500 V-630 A-AC22 B -690 V-630 A-AC-21B -Dimensions: 100/660/H190 mm -Weight: 5 kg
Brand: Eder & Müller Type: KT tilting table Year of construction: Description: Pneumatic swivel from horizontal to vertical position. Support grid extendable from 1500 - 2300 width and 1000 - 1600 height. Grooved rubber pad (original underneath or foam pads) Dimensions: Table length: 1500 - 2300 Table level: 920 mm Table width: 1000 - 1600 Weight: 90 KG
Müller-Dokument-Logistik-System, Inserting Machine – used - : Price from location: 39.500.-€ (net)! Manufacturer: Müller Type: 2016 Year of Make: 2016 6984F: Drive compartment incl. STOP 6978D Envelope Turner 8006C Inserting machine C5 / DIN long (approx. 6,000 cycles/h) 6628C/4 Multi-Channel System 6825C Folding machine (bottom-top) incl. STOP incl. stop on off 6822C-SCHALLSCH Soundproofing for Folding Machine 6822C-SCH-36583 Soundproofing for 6825C 6786D-L Collection Tray 6730C-L-STOP Transfer 6692D Sequencer 6784C-L Handover 6600D-12K Automatic Cutting Machine incl. Power Supply 6600BH Brush Holder 6875C Center Knife A4 tall, stacked, 2-up, pinfeed, face top / foot first always 2 sheets, Order Z-A Original price: over 100.000.-€ Condition: good Available: immediately Location: Lohne
cross-section width:: 40 (45) mm cross-section heigth:: 25 mm feed:: 1 - 999.999,9 mm speed of feed:: 1 - 60 m/min cuts max.:: 100 Schnitte/m Condition: used, Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles - diameter max.: 45 mm - 3 hoses or strands: 6 - 20 mm - 2 hoses or strands: 20 - 30 mm - 1 hose or string: 30 - 45 mm - cross section width max.: 40 mm - cross-section height max.: 25 mm - feed speed: 1 - 60 m/min, infinitely variable - Cutting capacity max.: 100 cuts/min depending on material and cutting length - Cutting length: 1 - 999.999,9 mm - Step jump: 0.1 mm - Feed by servo drive - Cutting by servo drive - Pulsed feed - Connected load approx.: 5 kW - Operating voltage: 3 x 400V, 50Hz, PE - Weight approx.: 550 kg - Dimensions (L/W/H): 1,940 x 890 x 175 ...
max. paper size: 30x21 cm serial no.: 1888 voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
