128,847 used machines on RESALE, but how to find them? Machine Search
Mueller Martini 351.0412 unwinding station Built in 2000; working condition
Built 2001 Format: min 140 x 100 mm max 480 x 320 mm Equipment o 3 rod feeder 3738; ready for use
Turning- and Distibution Built in: 2000; working condition
Built in: 1999-2004 100x print roll holder available; working condition
Roll-up station 0422 year 1996; ready for operation
Built in 1997 Product thickness max 85 mm Speed max 12.000 c/h Equipment o 18 stations ; working condition
Built in 1997 Size max 450 x 340 mm min 148 x 105 mm Speed max 80.000 c/h ; working condition
Size max 350 x 440 mm min 146 x 103 mm format trimmed max 310 x 420 mm min 140 x 100 mm Product thickness max 70 mm min 3 mm power max 6,600 c/h equipment o Ribbon supply o Zubehoer for format change: o 1 set of press plates and holders o 1 set table tops / bars o 1 set of plate tables o 3 set cutting strips o 2 knife seeds o Info: with cassettes ; ready for operation
Built 1997 Mechanical power 24,000 c/h Format main product max 96-120 pages min 4-8 pages format supplement max 96-120 pages Equipment o opening station with suction cup and sword o 2 main product feeder o 8 insert feeder o 7 bar feeder AF-200 o delivery coupled with o crosser CN-25; ready for operation
Size max 500 x 320 x 80 mm Speed max 16.000 c/h ; working condition
Equipment perfect binder o hand fed o 3 clamps o milling and roughening station o hot melt spine gluing unit ; working condition
4X RESERVE KNIVES SET FOR THREE-CUTTER M.MARTINI E6
MARTINI book sewing machine, various models in good condition, immediately available
Size: 320 x 480 mm Equipments: Equipment Feeder Number of feeder: 7x 370 Cover feeder: 1x 1529 Card gluer: Yes Stitching unit Type: Prima Amrys 2x stitching heads AMRYS - Automatic Make Ready System Three knife trimmer Type: Mueller Martini 360 Delivery Type: Mueller Martini 310 CS-20 Serial number: 97.00900.05 Delivery direction: to the right Optional (available on request) Stacker InkJet System Wrapping unit Mailing & Sealing Machines Inserting Machine Type: Mueller Martini 227 Number of stations: 4x Technical Details Size min: 90 x 105 mm Size max: 320 x 480 mm Mechanical speed max: 13,000 cycles/h
Size: 480 x 320 mm Equipments: Feeder Number of vertical feeder: 7 x 370 Cover feeder: 1x 1529 Stitching unit Type: Bravo 2x stitching heads Three knife trimmer Type: 360 Delivery Type: Stacker OMG Cucciolo Year: 2005 Optional (available on request) Center-cut device Trio-cut device Punching device Additional stitching heads Compressors Technical Details Mechanical Speed: 11,000 cycles/h Runtime 29.250 h
Built in 1995 1 card glue 315 Robatech Nozzle Glue Plant Hotmelt Glue Plant Delivery date: immediately from stock Price on request. We supply and install worldwide.
Size: 480 x 320 mm Impression: 25000 Mio. Equipments: Feeder Number of feeder: 4x 370 Cover feeder: 1x 1529 Stitching unit Type: Mueller Matini Prima 2x stitching heads Three knife trimmer Type: Mueller Martini 360 Delivery Type: Muller Martini CS 20 Serial number: 97.01006 Delivery direction: Left & right Optional (available on request) Center-cut device Additional stitching heads Compressors Runtime 25.000 h The machine can updated to 5 stations ( the feeder is included with the machine)
Size: 320 x 480 mm Equipments: Quality control: Semko ASIR III Feeder: Number of feeder: 9 x 370 cover feeder 1x 1529 Card adhesive: 1x 423 AMRYS - Automatic Make Ready System Stitching unit: Typ: Prima Plus Amrys 390 2x stitching heads AMRYS - Automatic Make Ready System Delivery: Typ: Rapido 7525 year: 2001 serial number: MMZO 490 194 Display direction: left Technical data: Format min: 90 x 105 mm Format max: 320 x 480 mm Maximum mechanical speed: 14,000 cycles/hour. Three-knife Typ: Mueller Martini 449 AMRYS - Automatic Make Ready System
Mueller Martini Ventura MC 160 - sewing machine year 2016 max. speed 9,600 signatures/h Signatures: length min. 120 mm length max. 425 mm width min. 75 mm width max. 320 mm thickness max. 4 mm Servo Drives Touch Screen Commander control max. 11 stitches Opening 2+2 Venturi jets Belt Delivery 3215.8225 signatures control by ASIR 3 3215.8045 leaf chain for thin signatures 3215.8043 device for thread melting
a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.
Specifications: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Diarrhea hole in the table approx. 300 x 200 mm - maximum installation height approx. 360 mm - Stösselfläche approx. 340 x 160 mm - Cone hole in the plug 40 mm - Plug adjustability 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - 2 hand operation - Pneumatic connection 6 bar - Flywheel drive / speed infinitely adjustable - Rotary wedge coupling - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 4500 kg - mechanical clamp feed MABU type ZPL 11 with 3 roller straightener
FRITZ MÜLLER ZE 625-4 hydraulic press was built in Germany by Fritz Müller GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. The first major overhaul was carried out in 1988 by the manufacturer’s service Machinenfabrik Mueller-Weingarten AG. A second overhaul was carried out in 2020, during which the press was brought up to current safety requirements. As part of this overhaul, a new control system based on a SIEMENS SIMATIC S7 PLC controller and a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel was installed, the entire electrical system was replaced, seals were replaced and light curtains were installed. The FRITZ MULLER ZE 625-4 is an extremely versatile press designed for even the most demanding metal forming operations. It is capable of performing operations such as deep drawing, stamping, forging, straightening large w ...
Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons
pressure: 160 t throat: 350 mm stroke: 20-140 mm stroke of worktool slide: 40-60 Hub/min ram adjustment: 75 mm total power requirement: 15 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton
pressure: 160 t throat: 360 mm stroke: 560 mm total power requirement: 33 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: 2000x2400x3650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Single-column eccentric press MÜLLER GEFREES type PDET 5 S/EKMasch. No. Year of manufacture 1988Compressive force 5 ton. Projection 125 mmColumn passage 170 mm Table surface 280 x 220 mmWaste height 90mmLifting area 160 x 100 mmLifting adjustment 4 to 40 mmRam adjustment 30 mmInstallation height largest stroke at the top max. 210 mmStroke rate 200 strokes/min. Clamping pin bore 25 mmTable height above floor 900 mmEngine power 0.55 kWNerg connection 380 volts, 50 Hz- pneumatic clutch-brake combination-
- Pressure capacity: 22 t - Projection: 175 mm - Stroke: 120 1/min - Plunger adjustment: 50 mm - Table height adjustment 50 mm - Stroke adjustment: 8-80 mm - Table: 520 x 400 mm - Plunger: 250 x 160 mm - Turnbuckle with trunnion clamping, D35 mm - Motor power 1.5 kW - Very smooth running - Mechanical disengagement of the rotary wedge coupling via pneumatic pneumatic cylinder - Pneumatic foot switch - No UVV - 4 pieces of machine feet - Connection cable CEE plug 16 A - Air connection with quick coupling - Weight: approx. 2,000 kg - Dimensions: Width 820 x Depth 1100 x Height 1800 mm
used
Press force: 1250 KN, Stroke rate: 55 min-1, Plunger adjustment: 75 mm Stroke: 20-120 mm, Motor power: 11 kW, Voltage: 380 V Machine weight: 8.6t Projection: 340 mm, Pusher clamping surface: 620 x 300 mm, Table clamping surface: 650 x 1000 mm, Ortlinghaus hydraulic clutch with double brake, Two-hand control device Demolition at the pestle was professionally repaired.
Offer 25450 Specifications: - Compressive force 100 t - Projection 300 mm - Table size approx. 650 x 450 mm - Height-adjustable table - Diarrhea hole in the table approx. 200 x 100 mm - Large installation height approx. 450 mm - Plunger area 70 x 140 mm - Peg hole in the ram 40 x 80 mm - Tappet adjustability 60 mm - Stroke adjustment 10 - 100 mm - Stroke rate 80 rpm - Pneumatically assisted coupling - Drive 380 V / 5.5 kW - Space requirement approx. W 1350 x H 2550 x D 1600 mm - Weight approx. 5000 kg
CONTROLS electronic controls SIEMENS S7 300 PRESS DESIGN drive system: eccentric / crank openings in uprights: yes number of suspensions: 2 table cushion: no quick die change system: yes PRESS FORCES total force (nominal): 250 to PRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1100 mm height above floor level: 1105 mm opening in bed (left-right): 1700 mm opening in bed (front-back): 305 mm SLIDE table surface (left-right): 2080 mm table surface (front-back): 1000 mm stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) slide adjustment: 120 mm stroke adjustment: yes stroke min.: 20 mm stroke max.: 180 mm TOOL ASSEMBLY DIMENSIONS & ...
pressure: 1000 t distance between columns: - mm stroke: 200 mm total power requirement: 30 kW weight of the machine ca.: 8 t multiple images available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
(1992) 125t Müller Eccentric Press Versatile Mechanical Forming Solution This eccentric press offers a nominal pressing capacity of 125 tons, designed for reliable and efficient mechanical forming operations. With an adjustable ram stroke range of 20–120 mm and an additional 80 mm ram adjustment, the machine provides flexible setup options for various tooling and production requirements. Technical Details Machine Type: Eccentric Press Manufacturer: Müller Machine Number: 3010 Year of Manufacture: 1992 Model: EPR/RH125ST Nominal Capacity: 125t Ram Stroke (Adjustable): 20 – 120 mm Ram Adjustment: 80 mm Total Weight: 9,000 kg Motor Power: 11 kW Operating Voltage: 380 V Safety Distance: 185 mm
(1983) 125t Müller Eccentric Press Heavy-Duty Mechanical Press Robust Eccentric Press from 1983 with a 125 t nominal force and adjustable ram stroke, ideal for precision forming and heavy-duty production. Technical Details Machine Type: Eccentric Press Manufacturer: Müller Machine Number: 1204 Year of Manufacture: 1983 Model: EPR/R125 Normal Nominal Force: 125t Maximum Nominal Force: 135t Ram Stroke (Adjustable): 20 – 120 mm Ram Adjustability: 80 mm Weight: 8,250 kg Motor Power: 11 kW Operating Voltage: 380 V Safety Distance: 205 mm Brake System: Equipped with an Ortlinghaus auxiliary brake system
(1961) 100t Müller-Weingarten Eccentric Press High-Precision Mechanical Press This Müller-Weingarten model is a versatile industrial workhorse featuring a variable stroke and a high-performance 11 kW motor. Designed for heavy-duty applications, it can process material thicknesses up to 12 mm with a consistent operating speed of 55 strokes per minute. Technical Details Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: ER 100 Year of Manufacture: 1961 Nominal Force: 100t Maximum Material Thickness: 12 mm Stroke Rate: 55 strokes/min Ram Stroke (Adjustable): 8 mm – 112 mm Ram Adjustment: 80 mm Shut Height (Die Space): 355 mm – 407 mm Overrun Time (Stopping Time): 0.174 Seconds Safety Distance: 278 mm Motor Power: 11 kW
maximum number of results exceeded
please refine your search
