muller cr used for sale

Heftkopf / Stitching Head Müller Martini HK 45 0305.0400 Serial-No. ET029

Schmalheftkopf / Slim Stitching Head Müller Martini  HK 45 0305.0100 Slim Stitching Head Müller Martini  HK 45 0305.0100

Heftkopf / Stitching Head Müller Martini HK 75 0881.4052 Stitching Head Müller Martini HK 75 0881.4052

Heftkopf / Stitching Head Müller Martini HK 75 0881.00015.4 Stitching Head Müller Martini HK 75 0881.00015.4

Heftkopf / Stitching Head Müller Martini HK 75 0881 Stitching Head Müller Martini HK 75 0881

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

Heftkopf / Stitching Head Müller Martini HK 75 0881.8070 Stitching Head Müller Martini HK 75 0881.8070

Heftkopf / Stitching Head Müller Martini HK 75 0881.8070 Stitching Head Müller Martini HK 75 0881.8070

Heftkopf / Stitching Head Müller Martini HK 75 0881 Stitching Head Müller Martini HK 75 0881

Heftkopf / Stitching Head Müller Martini HK 75 Heftkopf / Stitching Head Müller Martini HK 75

Heftkopf / Stitching Head Müller Martini HK 75 Heftkopf / Stitching Head Müller Martini HK 75 0881.8101 Serial-No. ET029

Heftkopf / Stitching Head Müller Martini HK 0249 HKOeQ6/8 Heftkopf / Stitching Head Müller Martini HK 0249 HKOeQ6/8

Heftkopf / Stitching Head Müller Martini HK 0249 HK 0249 HKOe06 Heftkopf / Stitching Head Müller Martini HK 0249 HK 0249 HKOe06

Heftkopf / Stitching Head Müller Martini HK45 0305.0400 Heftkopf / Stitching Head Müller Martini HK45 0305.0400

Muller Martini Concept year 2003, Max. Web Width: 520mm - 1 unwind, max. diameter 50" (127cm) with web guide - 6 wet offset printing units - 6 ink agiators, - Wet offset inserts, 6x 24", with reel rod (clamped) blanket cylinder - turn bars after towers no. 1, 2, - UV-drying, - file hole punching station - cross perforation stations with total 1 cylinder 24", - Remaliner punching "New Generation" for double stream production - length perforation- and length slitting station - 1 spiral folder with counter, web marking device and delivery table - 1 rewinder 50" (125cm) with web video

Formats: Minimum Book Size: 114x120mm, Maximum Book Size: 268x369mm, Minimum Book Thickness: 3mm, Maximum Book Thickness: 40mm, Mechanical Speed: 3600 Cycles/Hour, 16 Stations Müller Martini 1541 Gathering Stations With Hand Feed And Criss Cross, Spiral Raceway, Connection to Binder, 9 Clamp 1530 Binder, Cover Feeder, Milling & Roughening, Hotmelt Spine & Side Glue, Premelter, Pressing Station Year of Construction: ca. 1997

New Leveling Milling Head for Muller Martini Perfect Binder

Muller Martini perforation cylinder 25,5 ", pitch 1/4, in very good condition. For MM progress 520.

MM 3694 ZTM 3 gatherer – 12 stations – hand feed station MM 3030-19 Klebebinder MM 3632 stapler (year 2013) MM 3673 trimmer SCS Automaberg Easy Fly (year 2008)

Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton

pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 52/80 Hub/min ram - range of adjustment: 60 mm table surface area: 850x550mm mm ram surface: 420x220 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø 45 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2000x2000x2700mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Designed for professionals who require more out of a mini excavator, the MB 30 is a powerhouse of precision. Whether you're breaking ground on infrastructure projects or navigating utility lines, this model's improved reach, digging depth, and hydraulic strength set a new standard in productivity. Rugged yet refined, it's built for intensive daily use.

Operating Weight: Approx. 7,000 kg Engine: Yuchai YC4DK85-T300, EURO V Power Output: 62.5 kW / 85 HP / 2200 rpm Max Torque: 340 Nm / 1400–1700 rpm Displacement: 3.6 L Hydraulics: Lonking main valve + swing motor Hydraulic Flow: Up to 30 L/min Controls: Hydraulic-electric joysticks Tires: 8.25-16 industrial-grade pneumatic tires Drive: 4-wheel drive (optional locking differential) Max. Travel Speed: 28 km/h Max. Digging Depth: ~3,500 mm (depending on arm config) Cabin: Enclosed with heat and ventilation system Swing Speed: ~9 rpm Attachment Compatibility: Standard bucket + quick coupler; Supports Hammers, Augers, Grapples, etc.

Turn-mill centre manufactured in 1973. This MAX MULLER 3000 / Norma 2900 x 850 features a turning length between centers of approximately 2850 mm and a faceplate diameter of Ø 630 mm. It is equipped with a SIEMENS CNC Control and has a drive power of 32 kW. If you are looking to get high-quality turning capabilities, consider the MAX MULLER 3000 / Norma 2900 x 850 machine we have for sale. Contact us for further details.

pressure: 160 t throat: 360 mm stroke: 560 mm total power requirement: 33 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: 2000x2400x3650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 23 mm spindle taper: MK 2 spindle stroke: 130 mm arm length: ca. 860 mm table-size: 1280 x 500 mm surface area: ca. 1250 x 480 mm turning speed range: 115 - 2400 U/min workpiece height max.: ca. 535 mm boring chuck: Schnellspannfutter 1-13 weight of the machine ca.: 690 kg total power requirement: 1 kW range L-W-H: ca. 1300 x 1800 x 2100 mm Distance spindle center - stand center (projection): approx. 860 mm Distance table quill (workpiece height): max. 535 mm Adjustability of the horizontal/vertical arm: approx. 300 - 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Profile bending machine manufactured in 1993. This Müller Profilierung 3 features a maximum strip width of 300 mm and can handle material thicknesses up to 8 mm. It includes 13 forming stands on interchangeable plates and 4 hydraulic punching units. If you are looking to get high-quality profile bending capabilities, consider the Müller Profilierung 3 machine we have for sale. Contact us for further details.

Sammelhefter / Saddle Stitcher Müller Martini Bravo Plus Amrys Year 2007 - SN. MMZO 1 306 445 – Working hours 7.100Std./h PLC Steuerung mit Display - Geschwindigkeit max. 14.000 cyc./h. Size (untrimmed) max. 320 x 480mm - (trimmed) min. 105 x 148mm - Product thickness max. 5mm 6 Feeder Type 0370.0458 - SN. MMZO 1 306 445 Umschlaganleger / Cover Feeder Type 1529.0416 - SN. NN35997/ZO1306447 Doppelbogen/Dickenkontrolle / Semko Thickness Control Type 0333.0435 Heftstation / Stitching unit Bravo Plus Typ 0380.0450 - SN. MMZO 1 306 445 Dreischneider / Three Knife Trimmer 0449.0435 - SN. MMZ0 1 306 445 Bandauslage / Band Delivery Müller Martini 1564.0400 Manuals all included

Kreuzleger / Compensating Stacker Müller Martini Perfetto Amrys Year 2007 - SN. MMZO 1 306 445 - 60 Mechanische Leistung - Meachnic Spped max. 16.000Ex/h Manuals all included --sehr guter Zustand / very good condition--

Mitteltrennschnitt Einrichtung / Centre Cut for Double Production Müller Martini 360 Baujahr / Year 2007 - Serial-No. 0360 4211 9 For Müller Martini Saddle Stitcher Type 360 - 4/5th trimmer knife attachment Mitteltrennschnitt Einrichtung für Müller Martini Sammelhefter Type 360

Offer 25238 Specifications: - Max. load capacity with horizontal table top 350 Kg - Max. load capacity in all inclined positions 300 kg - Face plate diameter 400 mm - Through-hole / hollow shaft 125 mm - Face plate manually swivels left + right 0 - 90 ° - Rotary movement infinitely variable approx. 0.15 - 5.0 1/min - Right + Counterclockwise - E. footswitch - Welding current transmission approx. 350 A - Drive 400 V - Table height in horizontal position approx. 900 mm - Space requirement approx. W 1150 x H 900 x D 800 mm - Weight approx. 290 kg - Jaw chuck 250 mm

pressure: 60 t throat: 280 mm stroke: 10-140 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 740x560 mm ram surface: 380x195 mm hole in the table: 300x200 mm table height: 760 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S Type Eltropilot MByear of construction approx. 1980Rack with 20 module locations - 12 built-in modulesBuilt-in modules:1 Piece 0.651.406-19.3 UNI 030655-1017 Universal Interface1 Piece 0.650.847-56.1 O32 Output Card2 Piece 0.651.708-57.3 I32 032937-1017 Input Card1 Piece 0.652.138-36.1 APC1 Piece 0.651.928-25.3 LAB Position Control1 Piece 0.651.400-22.31 Piece 0.860.204-59.1 B321 Piece 0.652.128-35.0 RE41 Piece 0.651.269-26.0 ITY 030645-1017 Serial

Hydraulic self-centering steady rest, luenette, Lynette SMW AUTOBLOKHydraulic steady rest with hydrostatic bearingSuitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 NSpanning range: 8 to 70 mmOperating pressure: approx. 60 barBezel foot: 245 x 240 mmDesign: fixed- 3 pieces roller bearing 35 mm- Roller width 18 mm- hydraulically self-centeringDimensions L x W x H: 350 x 250 x 550 mmWeight: 65 kgGood condition; used

pressure: 35 t throat: 220 mm stroke: 8-96 mm no. of strokes: 120 Hub/min ram - range of adjustment: 50 mm table surface area: 580x440 mm ram surface: 305x170 mm hole in the table: 215x175 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 45 t throat: 230 mm stroke: 4-80 mm no. of strokes: 120 Hub/min ram - range of adjustment: 55 mm table surface area: 695x455 mm ram surface: 365x180 mm hole in the table: 220x180 mm table height: 890 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 300 mm stroke: 10-140 mm no. of strokes: 60 Hub/min ram - range of adjustment: 60 mm table surface area: 800x500 mm ram surface: 430x230 mm hole in the table: Ø150 mm table height: 860 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single-column eccentric press MÜLLER GEFREES type PDET 5 S/EKMasch. No. Year of manufacture 1988Compressive force 5 ton. Projection 125 mmColumn passage 170 mm Table surface 280 x 220 mmWaste height 90mmLifting area 160 x 100 mmLifting adjustment 4 to 40 mmRam adjustment 30 mmInstallation height largest stroke at the top max. 210 mmStroke rate 200 strokes/min. Clamping pin bore 25 mmTable height above floor 900 mmEngine power 0.55 kWNerg connection 380 volts, 50 Hz- pneumatic clutch-brake combination-

Mobile 150L vessel with passiv-doubleflap. In M4V steel.

24" printing cassetes for MM Grapha. Gearpits 96. In good condition.

pressure: 1000 t distance between columns: 5000 mm stroke: 500 mm Height of centres: 400 mm Motor output: kW reus: U/min Overall size: 6000 x 2500 mm Weight: 1000 kg Distance between centres: 3500 mm total power requirement: kW weight of the machine ca.: 220 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Printing inserts only for Muller Martini model Grapha: 4 x 16" 4 x 20" and 4 x 24"

6 feeders 1555 1 cover feeder 1529 1 stitching unit 380 – 3 stitching heads HK 75Q 1 three knife trimmer 449 MM 1564 belt delivery 1 MM Apollo 1540 stacker Compressors

- Pressure capacity: 22 t - Projection: 175 mm - Stroke: 120 1/min - Plunger adjustment: 50 mm - Table height adjustment 50 mm - Stroke adjustment: 8-80 mm - Table: 520 x 400 mm - Plunger: 250 x 160 mm - Turnbuckle with trunnion clamping, D35 mm - Motor power 1.5 kW - Very smooth running - Mechanical disengagement of the rotary wedge coupling via pneumatic pneumatic cylinder - Pneumatic foot switch - No UVV - 4 pieces of machine feet - Connection cable CEE plug 16 A - Air connection with quick coupling - Weight: approx. 2,000 kg - Dimensions: Width 820 x Depth 1100 x Height 1800 mm

Printing inserts for Muller Martini Grapha 16". For more info please inquire.

Switches to Muller Martini saddle stitcher feeder: - 0416.2067.2 Switch, 26 pcs. Original price: CHF 1082.00/pcs. Retail price: CHF 400.00/pc. - 0345.3222.2 Switch, 2 pcs. Original price: CHF 653.50/pc. Retail price: CHF 300.00/pc. - 0345.3216.2 Switch, 1 pc. Original price: CHF 848.25/pcs. Retail price: CHF 400.00/pc. - 0316.3206.2 Switch, 1 pc. Original price: CHF 768.00/pcs. Retail price: CHF 400.00/pc. - 0316.3208.2 Switch, 1 pc. Original price: CHF 800.00/pc. Sales price: CHF 400.00/pc.

Locking block for die casting machine GDK2500 by Frech, PADS1117.400, Parker, overhauled-as good as new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Refurbished! The locking block was overhauled by Parker, is in the original packaging and is in an immediately usable, top condition. The locking block can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Locking block, Parker, PADS1117.400, Suitable for the GDK 2500 machines from Frech/Müller Weingarten The block was still delivered to machines from Müller Weingarten and has SAE connections. Art. 937009 Weight 650kg Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D ...

Cylinder part for Multi for GDK3500 die casting machine, 931732, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The cylinder part for Multi comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and fully functional. The cylinder part for Multi item 931732 from Frech/Müller Weingarten. Suitable for Frech/Müller Weingarten GDK 3500 machines with 185-tonnes or 220-tonnes units.. Weight 720 kg. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250,  ...

Neuweriger Doppelkopf make W. Müller. With WDS and filter