muller cr used for sale

Muller Martini Progress S 24 or 25 inch Year : 1996 Print width: 20" Maximum print speed: 335 m/min 5 printing units, type 2047 UV dryer: yes, see below 2 turning crosses Camera: BST SHS 3000 Pro camera system Cross-cutter: yes, MM 2088 Double-hole punching (24" + 25") Stack delivery: MM UNISTACK 2000 Turning crosses: 2 pcs Cylinder range: convertible to 24" and 25" Additional magnetic cylinder (for die-cutting plates) and one perforating cylinder Numbering tower: yes Color control: overall, manual color zone control UV drying: Baldwin SpecTronic Spiral folding 24" and 25" Double-hole punching (24") + 25") Rubber washing system: no Unwinder 2036/2037 and rewinder 2033

High-performance milling spindle, unused                high speed milling spindle, unused   Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                                         FS 40-10-30-4- AOW                                                                                B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

High-performance milling spindle, unused                high speed milling spindle, unused  high speed milling spindle, unused/new   Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                            FS 40-10-30-4- AOW                                                                  B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

Perfectbinding line Acoro A7, 16 Station gathering machine type 1571, machine number NN31846/FE1193085, Tensioning element with hand feeding unit, Asir 3, 2 Vacuum pumps, Inhouse blowair, Spiral raceway type 3635 machine number MMFE1237011/75, MM3643, criscross delivery, intermididate element, MM 3642 Book block feeder,Endsheet-tipping element MMFE 1237011/ MNEZ1217462, MM 3648, Acoro A7 28 clamps perfectbinder, Main milling station, Roughening and notching station, Hotmelt spine glue unit, hotmelt side glue unit, Additional PUR spine glue unit, Hotmelt Premelter C80 for spine glue, Hotmelt premelter for side glue, Premelter for PUR spine glue, Pile cover feeder, Ansi water scorring, Scorring system, Double nipping station, Laydown system, MM drying conveyor system approx 50 meter, Reject gate, Muller martini 3671 Three knife trimmer Merit S year 2007 Machine number 1237011 MMEZ 1247462  ...

CNC Engraving Machine MÜLLER LCF - 2 Travel: X 375 mm Y 570 mm Z 90 mm Technical0.321020121002 Data: Table size 700 mm x 480 mm Weight: 50 kg Exterior dimensions: Length: 700 mm Width: 500 mm Height: 350 mm Accessories: Computer Screen Keyboard Mouse Software Control Kress cutter Vacuum pump Valve Spray Mist With this, versch. Collet and cutter - NEW

a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pd-MU 3x690 V 50 Hz 2000/1 A-1-0-+3 MW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 20 kV/100 V 120/1 A 4.156-0-4.156 MW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg

Measuring transducers, power measuring transducers, real power measuring transducers -Manufacturer: Muller Ziegler, transmitter -Type: Pdr-MU 30 kV/100 V 50 Hz 150/1 A 500-0-7500 kW -Price: per piece -Number: 2 pieces -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 690/400 V 50 Hz 150/1 A 0-150 kW -Number: 4x devices available -Price: per piece -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece

Measuring transducers, power measuring transducers, real power measuring transducers -Manufacturer: Muller Ziegler, transmitter -Type: Pdr-MU 575/332 V 50 Hz 3000/1 A 500-0-3000 kW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg

pressure: 63 t distance between columns: 0 mm stroke: 160 mm table surface area: 630 x 500 mm dayligth: 400 mm total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 5 Schläuche 3-5 mm cross-section heigth:: 3 - 20 mm feed:: 1,5 - 50 mm Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.:  ...

optical angel measuring unit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 850 mm turning length: 2000 mm turning diameter over slide rest: 690 mm control: Siemens type: 840 C Cooling through the spindle: 23 bar centre height: 450 mm spindle diameter in front bearing: 200 mm spindle hollow: 128 mm power capacity: 60 kW turning speeds: 7-1800 U/min Torque: 7908 Nm workpiece weight: 4000 kg tailstock quill diameter: 160 mm tailstock quill taper MT: 5 3 jaw chuck Forckrath: 600 mm Tool changer: 60 work piece power: 30 kW turning speeds: 56-3000 U/min total power requirement: kW weight of the machine ca.: 18 t dimensions of the machine ca.: 6,3x2,4x3,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Diarrhea hole in the table approx. 300 x 200 mm - maximum installation height approx. 360 mm - Stösselfläche approx. 340 x 160 mm - Cone hole in the plug 40 mm - Plug adjustability 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - 2 hand operation - Pneumatic connection 6 bar - Flywheel drive / speed infinitely adjustable - Rotary wedge coupling - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 4500 kg - mechanical clamp feed MABU type ZPL 11 with 3 roller straightener

5 sets of knives for the three-knife trimmer Muller Martini Zenith 3672 Tungsten Carbide Quatro

Grinding range: approx. 130 x 255 mm Grinding speed: 2800 rpm Table size: 150 x 300 mm Drive motor: 380 V, 1.5 kW Space requirement: 750 x 700 x 1700 mm Weight: approx. 380 kg Pot disc Ø: 180 mm

NH fuse -Type: HLS 00 -50 A 500 VAC -Price: per package of 3 fuses -12x packages: 3 pieces each -Weight: 0.6 kg per package

Card gluing unit for MM saddle stitchers Make Müller Martini Model 315.0402 Year 1990? 1995? Min. size 40 x 60 Max size 250 x 350 mm Stitches 1-5 Details interface changed to modern tocuh screen, Nordson hotmelt kettle with heated hose and glue appliance head Available direct

Gear motor, electric motor, electric gear motor -Manufacturer: Müller & Georg, geared motor type ZGO G3 K 4 -Speed: 160 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 22 x 50 mm -Protection rating: IP 54 -Dimension: 450/158/H205 mm -Weight: 14.8 kg

Sewingmachine Make Müller Martini Model FK-I1-S Year 1960 Min. size 40 x 60 Max size 250 x 440 mm Stitches 1-8 Details Independend thread tensioning, cutting function

Stacking tongs, box lifter, bundle clamp, gripper -Manufacturer: Müller Martini, pneumatic stacking tongs type 0277.0401 -Load load: max. 250 kg -Clamping range: 850 to 1350 mm -Quantity: 2x grippers available -Price per piece -Transport dimensions: 940/250/H530 mm -Town weight: 87 kg/pc.

Brand: Eder & Müller Type: KT tilting table Year of construction: Description: Pneumatic swivel from horizontal to vertical position. Support grid extendable from 1500 - 2300 width and 1000 - 1600 height. Grooved rubber pad (original underneath or foam pads) Dimensions: Table length: 1500 - 2300 Table level: 920 mm Table width: 1000 - 1600 Weight: 90 KG

1 MÜLLER label cut and fold machine type LCFR2, year 2017

cross-section width:: 40 (45) mm cross-section heigth:: 25 mm feed:: 1 - 999.999,9 mm speed of feed:: 1 - 60 m/min cuts max.:: 100 Schnitte/m Condition: used, Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles - diameter max.: 45 mm - 3 hoses or strands: 6 - 20 mm - 2 hoses or strands: 20 - 30 mm - 1 hose or string: 30 - 45 mm - cross section width max.: 40 mm - cross-section height max.: 25 mm - feed speed: 1 - 60 m/min, infinitely variable - Cutting capacity max.: 100 cuts/min depending on material and cutting length - Cutting length: 1 - 999.999,9 mm - Step jump: 0.1 mm - Feed by servo drive - Cutting by servo drive - Pulsed feed - Connected load approx.: 5 kW - Operating voltage: 3 x 400V, 50Hz, PE - Weight approx.: 550 kg - Dimensions (L/W/H): 1,940 x 890 x 175 ...

6 Feeder Stations, 1x Cover Feeder, Stiching Unit with 2x HK 75, Three Knife Trimmer, Rima RS-10S 9-1/4" Stacking Delivery, M-No. 103403-10, Capacity: 12000 Cycles/Hour

NH fuse switch disconnector -NH2-400 A -500 V-630 A-AC22 B -690 V-630 A-AC-21B -Dimensions: 100/660/H190 mm -Weight: 5 kg

FRITZ MÜLLER ZE 625-4 hydraulic press was built in Germany by Fritz Müller GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. The first major overhaul was carried out in 1988 by the manufacturer’s service Machinenfabrik Mueller-Weingarten AG. A second overhaul was carried out in 2020, during which the press was brought up to current safety requirements. As part of this overhaul, a new control system based on a SIEMENS SIMATIC S7 PLC controller and a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel was installed, the entire electrical system was replaced, seals were replaced and light curtains were installed. The FRITZ MULLER ZE 625-4 is an extremely versatile press designed for even the most demanding metal forming operations. It is capable of performing operations such as deep drawing, stamping, forging, straightening large w ...

More details upon request

8 stations gatherer 3692 (4 double stations) Hand feed station ASAC (Automatic Signature Thickness Measuring System) Criss-Cross delivery 1588 Book length : 140 - 460 mm Book width : 100 – 320 mm Signature thickness : 6 mm Speed : 6000 t/h

• Stainless steel pharmaceutical version • Payload 350 kg • Lifting height top of fork approx. 140 cm without telescope • Fork width 170 cm, fork length 115 cm • Drive • New accumulator • New charger • Only 71.3 operating hours • El. connetcion 230V/50Hz

max. paper size: 30x21 cm serial no.: 1888 voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three knife trimmer Feeder (4 x) Stitching unit (0380) Stacker (Rima RS1410 (2011) Cover feeder

6 feeder, type 370, 8 stations chain, type 370, 4 double universal bases, 1 cover feeder, type 1529, stitching unit, type 390, stitching control, 2 stitching heads, type HK 75, three knife trimmer, Type 361

Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Year of construction 1997/1999 Format: max 510 x 310 x 60 mm; min 140 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Envelope size: max 642 mm; min 203 mm Capacity: max 12,000 c/h Equipment Gathering machine • 18 stations • Investor 3691 • Diverter 3614 Controls • Double and faulty sheet control • ASAC automatic self-adjusting caliper Intermediate building blocks • Set-up element • 3 vibrating element • coupled with Bookbinding • Milling and roughening station • Hotmelt backing glue • Hotmelt side gluing unit • 2 Premelters • SF Shed Envelope Feeder • SF envelope pressing • Plate chain depositing tape Cooling section • approx. 30 m • inline with Three-knife trimmers • Three-knife trimmer MM Zenith 3672 Stacker • Muller Martini compensating stacker Standards • Standard accessories •Operat ...

3 Double Feeders, 1 Hand Feeder, 1 Cover Feeder 1522, Stiching Unit 1528, Three Knife Trimmer, Belt Delivery, Format: Max. 365x305mm, Min. 148x105mm, Max. 360x300mm, Min. 140x75mm, Stiching Thickness: Max. 10mm, Capacity: 9000 Cycles/Hour, Standard Accessories

4 feeders 370 1 cover feeder 1529 (year 1998 - s/n 91.07099.50) 1 stitching unit Bravo MM 380 (year 1998 – s/n 91.07099) + 2 x HK75 heads 1 MM 360 (year 1998 – s/n 91.07099) 1 MM Pratico stacker Compressors Counter : 17 602 working hours

Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons

Muller Martini Perfect Binding Line, Equipped With: Endsheet Feeder, Perfect Binder: Muller Martini 3006-18 with Stream Cover Feeder with 18 Stations, Book Block Feeder, Hot-Melt Spine and Side Gluing with Pre-Melter, Spiral Lay Down Balance or Drying Converyor to Trimmer. Three Knife Trimmer: Muller Martini 3670 With Cassettes for Quick Change, Stacker Delivery, Max. Size: 450x310mm, Max. Speed 6.000 Cycles/Hour, Max. Size Head/Tail: 420mm, Max. Size Spine/Front: 305mm, Production: 4.000 Books/Hour.

pressure: 60 t throat: 280 mm stroke: 10-90 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 750x540 mm ram surface: 600x200 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø35 mm weight of the machine ca.: 3,7 t dimensions of the machine ca.: 1800x1800x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 Stitching Heads Muller Martini HK 45 Atr.Nr. PS6173

pressure: 2 t distance between columns: - mm stroke: ? mm throat: ? mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m hydraulic press 2t Drive: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor belt/accumulation conveyor with belt flap: - With 3 own drives - With 3 waiting positions - With its own control system - Length 600 + 600 + 800 mm = 2 m total - Max. speed 90 m/min. (adjustable via frequency converter) - Max. load 25kg/m - Max. stacking height 500 mm Application/Functionality: - Allows you to quickly traverse production lines without having to walk around them or climb over them with a ladder. Conveyor belt holds when belt flap is lifted. - If the following machine is occupied, the bundles/packages are stopped at three consecutive waiting positions until they are released by the following machine. - Contacts for release signal from upstream and downstream machine with plug connection 24V

Double pressing/folding/product pressing single or shingle flow Condition: overhauled, serviced, fully functional, ready for use Min. format: spine 180 x width 140 mm, number of pages (45g/m2) tabloid 8, two-fold/broadsheet 4 Format max. spine 450 x width 340 mm, number of pages (45g/m2) tabloid 128, two-fold/broadsheet 64 Mechanical speed max.: 10000 revs/h

Distribution belt / Deserting system For splitting a shingle stream into two processing lines Condition: overhauled, serviced, fully functional, ready for use

Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 800 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with function pass-through flap -> straps stop as soon as the flap is lifted. Equipped with its own drive and controls. Fixed transport speed, no frequency converter installed. Machine runs flawlessly. New conveyor belts were installed.

Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 600 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with its own drive (attention, currently no own control). Equipped with recessed handle for easy product removal.