muller cr used for sale

Maximum force ton-force 400 Slider stroke length mm 250 Number of courses of a slider per minute 25 Maximum distance between table and slider (in lower position of slider) mm 670 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 Main electric motor power kW 40 Press overall dimensions mm - length 3410 - width 3140 - height 5930 Press weight kg 30 600

Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Reel for: crane chassis -Drawing with the photos -Chain length: 3600 mm -Quantity: 1x reel available -Price: per piece -Dimensions: 710/250/H220 mm -Weight: 19 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Beam width: 100-150 mm -Payload: 1000 kg -Number: 1x drives available -Price: per piece -Dimensions: 370/405/H340 mm -Own weight: 47 kg

Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Beam width: 90-180 mm -Load capacity: 3000 kg -Number: 1x drive available -Dimensions: 320/330/H340 mm -Weight: 50 kg

PKZZ 250 Double Column Crank stamping Press Completely overhauled. Electric and Control- Not available. Table 2500 x 1400 mm Ram 2320 x 1250 mm Distance between uprights 2525 mm Window in table width 2300 mm Window in table depth 850 mm Stroke 400 mm Strokes per minute SPM 12 Adjustment of ram 120 mm Shutheight 550 mm Table cushion force 50 to Cushion stroke 160 mm Motor 32 kW Weight ca. 39 tons

Upper support, cross support, cross table, cross slide table -Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL -Table surface: mm -Travel: x 350 mm/y 220 mm -Dimensions: 1380/1000/H800 mm -Weight: 800 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 28.7 m -for electric cable winch -other crane ropes are also available Price: per roll -Quantity: 2 rolls available -Weight: 10.5 kg/piece

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 11 mm -Length: approx. 27 m -for electric cable winch -other crane ropes are also available -Weight: 15 kg

Recon Part number: 0208 9754 Complete standard dimensions: 210/175mm incl. counterweights and gear incl. DNV-GL test Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: approx. 25 m -for electric cable winch -other crane ropes are also available -Weight: 24 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: approx. 34 m -for electric cable winch -other crane ropes are also available -Weight: 36 kg

MAK 8M32 Crankshaft for sale Used Standart size In our stock in Istanbul Turkey Please contact: info@fin-marine

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 25 m -for electric cable winch -other crane ropes are also available -Weight: 17 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 36 m -for electric cable winch -other crane ropes are also available -Weight: 18 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 16 mm -Length: approx. 22.8 m -for electric cable winch -other crane ropes are also available -Weight: 19 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 10 mm -Length: approx. 7 m -Stainless steel -for electric cable winch -other crane ropes are also available -Weight: 3 kg

Demag 250 kg crane system Payload: 250 kg Control GSA Type 4 Drive: Side: 3m Forward 2m Crane system has already been dismantled. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Hagesana Cream Lighter Cream King Stainless steel boiler analog control incl. tools

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm -Length: approx. 10 m -for electric cable winch -other crane ropes are also available -Weight: 3 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: 52.5 m -for electric cable winch -other crane ropes are also available -Weight: 55 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope Ø 14 mm -Length: approx. 45 m -Material: Stainless steel -for electric cable winch -other crane ropes are also available -Weight: 37 kg

WARTSILA 8L32 CRANKSHAFT STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS

2 PCS WARTSILA 6R32 CRANKSHAFTS , STD SIZE. TOGETHER WITH GEARS AND COUNTERWEIGHTS

WARTSILA 6L20 CRANKSHAFTS , STD SIZE , 2 PCS TOGETHER WITH GEARS AND COUNTERWEIGHTS

Hello all We have in our stock in istanbul Turkey 2 x WARTSILA 8R32 CRANKSHAFTS, STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS Please contact us at : info@fin-marine for more info

MaK 6M552C CRANKSHAFT , STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm -Length: approx. 19 m -for electric cable winch -other crane ropes are also available -Weight: 4 kg

DEUTZ 6M628 CRANKSHAFT, STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS

Business card modul Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz Machine checked and cleaned

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope -Wire rope: Ø 5 mm -Length: 10 m -for: Electric cable winch -other crane ropes also available -Price: per piece -Quantity: 6 pieces -Weight: 1 kg/piece

Crank winch, Dunkraft, diamond jack, steel winch -Manufacturer: Pfaff, steel winch type 0104000 -Load capacity: 1.5 t -Lifting height: 0.35 m -Number: 4x winch available -Price per piece -Dimension: 740/120/140 mm -Weight: 10.3 kg / pc.

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Demag, crane chassis -Beam width: up to 163 mm -Load capacity: 500 kg -Dimensions: see technical drawing in the photos -Dimensions: 250/243/H180 mm -Weight: 15 kg

Inv. Num. : 5831 Type: PKnT 160 Producer: ERFURT Created: 1987 Parameters: Compressive force: 160 t Maximum stroke rate top table: 15 1/min Total power requirement: 21 kW Ram stroke: 265-425 mm Adjusting the plunger: 130 mm

STX crankshaft for engine 28/32 MAN. Part number - 101180B

Operating lever, cross lever, cross switch, cross toggle switch lever -Control lever: Cross toggle switch -Type: KSK 22/6 021652 -Voltage: up to 250V 10A -Dimension: Ø 81 x 137 mm -Weight: 0.3 kg

Center height: 300 mm Turning diameter: 600 mm Distance between centers: 2100 mm Eccentricity: max 140 mm Self centering chuck diameter: 200 mm Work piece weight: max 250 kg Grinding diameter: 224 mm Work piece turning speed: 18/40/63/90 rpm Grinding wheel dimeter: 915 mm Grinding wheel thickness: 32-63 mm Grinding motor: 7,5 hp Size: 5000 x 2100 x 1700 mm Weight: 4900 kg Includes 3 wheel hubs and 4 used grinding wheels

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: TER Tecno Elettrica Ravasi, Crane remote control with cable / Portable control panel for crane -Cable length: 25 m -Dimensions: 700/560/H380 mm -Weight: 18 kg

Crane remote control, radio receiver, receiver, crane radio remote control, radio control system -Manufacturer: Telemecanique, crane remote control with cable / portable crane control panel -Cable length: 23m -Connector: 16 pin -Dimensions: 600/400/H340 mm -Weight: 13 kg

Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control

Linear bearing, linear rail, linear guide, roller guide rail, guide rail, crossed roller guide -Manufacturer: Schneeberger, Cross roller guide type 9700 -Hole spacing: 100 mm M8 -Quantity: 4 pieces -Price: per piece -Dimensions: 705/22/H45 mm -Weight: 4.5 kg/pc.

Hagesana Cream Blower  Type: Cream King SF20 Year of construction 2001 Stainless steel boiler digital control with compressed air Emergency Off Switch Height: 130cm Width: 80cm Depth: 56cm

Adjustable traverse, crane traverse, indoor crane, crane hook traverse, load traverse, heavy-duty traverse -Crane traverse: heavy-duty traverse -Carrier: IPB 550 / HEB 550 -Dimensions: see photo technical drawing -Transport dimensions: 7220/920/H1015 mm -Own weight: 2100 kg

Crane block, deflection pulley, cable pulley, steel cable pulley, cable deflection pulley, crane, block and tackle -Crane block: with guide rails -Rollers: Ø 350 mm / 4 grooves -Number: 8x pulley available -Price/delivery: per piece -Transport dimensions: 650/330/H350 mm -Weight: 50 kg/pc.

Ultra freezer, freezer, freezer used Manufacturer: NEW BRUNSWICK Type: U725 -86 Model: U9440-0001 Temperature range down to -86 ° Net capacity: 725 l 3 compartments approx. 860 x 420 x 600 mm (WxHxD) Stainless steel lining 230 V Total dimensions: approx. 1100 x 900 x 2100 mm

free-standing crane system Dimensions: width x height x length, approx. 4 x 9 x 21m Two trolleys, 1000kg each In the build-up state

winch rope, crane rope, hoist rope, wire rope, stainless steel rope -Manufacturer: Manitowoc, crane rope Ø 17 mm -Length: about 250m -Item No.: 03120320 D17 x 250M -Price: complete -also other crane ropes: available -Transport dimension: Ø 700 x 600 mm -Weight: 420 kg

Crosscut saw, pull saw, miter saw, plunge saw -Remark: Unit made of slats/blinds production, without control -Saw blade: Ø 188 mm -Individual components: see photos -Dimensions: 1390/620/H1130 mm -Weight: 576 kg

Crowner KOSME with 8 closing heads work direction: left to right year of manufacturing: 2013 capacity: 4.000 - 12.000 bph the machine will be complete recondition incl. - new electrical panel with Siemens frequency inverter - new safety housing

Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control -Manufacturer: DEMAG Mannesmann Dematic, crane control PNN-BUS-3 -Type: RC-E 10 -Total dimensions: 380/180/H125 mm -Weight: 2.2 kg

Crowning for press brake, bending bench, die holder with displacement device -Manufacturer: HACO, die holder with crowning for press brake type PPES 30135 -Matrix length total: 3050 mm -Individual components: see photos -Transport dimensions: 3570/260/H405 mm -Weight 374 kg