muller cr used for sale

creasing machine for board Make Krause Model Creasing machine Creasing length 100 cm Creasing depth adjustable/variable Available Direct

creasing + cutting machine for board - slotting Make Krasue Model Creasing machine Creasing length 105 cm Creasing depth adjustable/variable Cutting length 30 cm slotting Cuting width 4 mm Function creases and cuts board in 1 cycle for making boxes, maps, etc. Available Direct

Model: C746 No. Of Shelves: 4 Dimension cm: 62x100 Loading surface sq. M: 3,7 Distance between Shelves mm :120 Min temp. Of Condenser ºC : -70 Condensing nominal capacity KG :74 No. Of Trays 310x480x40mm: 24 Trays 300x600x40 mm Overall Dimensions Width A mm: 900 Depth B mm: 2600 Height H mm : 2000 Electric Control Cabinet Width A mm : 770 Depth B mm : 550 Height H mm : 1920 -Specifications are not binding- Refrigeraton Units : dimension according to plant location Power KW (approx) : 25 Total weight Kg : 2900 Ampuls Ø 13: 21.120 Ø 22: 7.440

MAN D2066 used crankshafts, pn/ 51.02101-0673 for 1000 Euro / each., Crankshafts have STD sizes and are in perfect condition., Delivered with 3 months warranty.

ID3411 Crane Repair Spreader for 20ft Container year/Baujahr 2016 - brand new, unused 1.5 t Spreader to move sea container 20Ft, SWL: 40.000 Kg, is completely new never used Move spreader to sea container 20Ft, SWL: 40,000 Kg, is completely new never used

Cremer TQF-4100 product counting system including bucket elevator to feed packaging machines (eg. VFFS, etc.), 4-lane counter with separate infrared detection channels, automatic reject in case of undercounting or overcounting, keypad for setting up, operating, monitoring and managing the recipe of the counter, electrical connection 3x400V/3Ph/50Hz, power consumption 700 VA, compressed air supply 6-8 bar, operating pressure 6 bar

Electric motor BROOK CROMPTON Type: D160 LD ( D160LD ) Motor power 15 kW Speed : 1460 rpm Voltage: 220/ 380V Eddy current coupling:: 180 CD4/2 Power: 12.3 kW speed: 1275 rpm 90V, 3.3 Ad.C. Degree of protection: IP23 PYE Dimensions: 1040x450x500 mm

Husmann HL I 1222 ES single-shaft crusher: Working speed max. 35 rpm, 28 knives Knife width 100 mm. Outer diameter of shaft 660 mm, shaft length 2,260 mm Cutter opening 1,200 x 2,200 mm Electro-hydraulic drive with 400 bar system pressure Drive power 200 kW Torque 90,000 Nm to 110,000 Nm Throughput capacity 40 t/h Hopper made of highly wear-resistant steel Discharge conveyor belt with magnetic separator and cleaning brush + Günther starscreen: MULTISTAR 2-SE Screen deck: L: 4,000 mm; W: 1,200 mm; centre distance 266.5 mm. sieve section 60...90 mm Drive 2 x 4 kW Throughput capacity 15 t/h Total plant run only 10 operating hours! Year of manufacture 2020 Find more here - /

Noise protection cabin with indoor crane, used as a welding cabin (therefore optionally with extraction). HüWa noise protection cabin with crane runway including 2 Demag cranes & electric rolling doors. Cabin dimensions: L = 26,000mm, W = 8,000mm, H = 5,300mm Data cranes: Track length: 25,000mm, load capacities: 1,000kg / 500kg, beam lengths: 7,000mm / 7,000mm. KBK crane track with suspensions Crane 1 with electric chain hoist including energy supply and circuit breaker, including electric trolley and crane travel KBK double girder crane load capacity 1,000kg, Electric crane driving with RF125 crane 2 with electric chain hoist including energy supply and circuit breaker, in aluminum version KBK double girder crane load capacity 500kg. Cabin is dismantled and stored in A-4942 belts. Find more here - / Contact us at -

cutting diameter: 250 mm saw band length: 3150 x 27 x 0,9 mm table height: 750 mm cutting width: 170 x 310 mm cutting speed: 25 - 90 m/min : 130 mm : 130 mm : 205 mm Impact energy: 205 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions: 0,95 x 1,16 x 1,98 m Solid band saw - Double miter cuts on the right up to 60°, on the left up to 45° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material stop max 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Schleicher Promodul U with 13 Pcs Access Modules 1 Rack Access, Type: Promodul U, Sale without Warranty: 13 Pcs Access Modules, No Return Policy: 1 Rack Access,

Manufacturer: Wandress, Type: CH 29M/1650 BI 99DS/3/1650, Year: 2002, Control: yes, Dust removal brush: yes, Brush type: Riemen, Number of units: 2, kW Leistung Motoren: 0,5, Number of rotations controlled: yes, Units mounted upright: yes, Working width mm: 1700, Through running hight mm: 120, Roll transport: yes, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 5-20, kW-Vorschub: 0,75, Electrical hight adjustment: yes, rotor jets: no, FREE TEXT: Vorgeschaltete Entstaubung im High Speed channel HSC 50/2/1650/ Arbeitshöhe 1100 mm, Year :2002

Manufacturer: Tesa SA Vermessungtisch, Type: Messfeld 560 X 750 X 410 MM , FREETEXT1: Rechner und Steuerung sind vorhanden, FREETEXT2: Anlage wird vor Verkauf auf Funtion geprüft,

Manufacturer: Tranpporband Abdeckung, FREETEXT1: Länge 2580 mm, FREETEXT2: breite, FREETEXT3: Breite 1580 mm, FREETEXT4: Durchlasshöhe 100 mm,

Manufacturer: Siemens Getriebemotor, Type: RPL 40-1 H 9486 1/5 BK, Volt: 375, n-min: 18, pm: 4800, Weight approx. kg: 50,

Manufacturer: VICKERS RTE T1M6030, Type: DBC20618, Model: DBC20618, Serial number: 2976, Systemconfiguration: TAM 6030,

Manufacturer: Berkmann Zuluft und Abluft Spritzstand, Year: 2009, Control: yes, Heizmedium : Gas, Heat recovery: yes, Electronic control board: yes, Number of spray booths: 1, Number of evaporation booths: 1, Abluftventilator m³/h: 14000, Underfloor exhaustion: yes, Supply air system: yes, Dachausführung: yes, Zuluftgerät kW Leistung 1: 232, Exhaust air device: yes, Ex-installed lamps: yes, Heat recovery: yes, Rückwärmezahl %: 38, max. Wärmerückgewinnung kW: 77, Overall heating output: 160, Year :2009

Manufacturer: Vakuumsaugtisch zum schleifen Plattenmaterial, Year: ca2000, FREETEXT1: Tischlänge mm 1700, FREETEXT2: Tischbreite mm 400 , FREETEXT3: Saugerreihen 1, FREETEXT4: Drehbar stern, FREETEXT5: Aushebung, FREETEXT6: Höhe verstellbar1030 mm, FREETEXT7: Busch Vakuumpumpe, Year :ca2000

Manufacturer: Indramat, Type: MOD 3/1 X 003-334 KDS 1.1 100-300-W1/220, Produktionsnummer: 237-787 B 12.065, Frequenzumrichter: yes,

Completely refurbished

We are selling here a frozen meat slicer from the manufacturer FMS GmbH in a very good used and functional condition. The machine runs on 400 volts, completely stainless steel, rollable, passage 38 cm wide, for chopping frozen meat, workshop tested, dimensions W/D/H 70/95/90 cm, others on request.

Used cheese packaging line made by CRYOVAC. New: 2004. The line includes: 1)BL60 bagging machine (CRYOVAC, 2004) TECHNICAL DATA: - Weight: 600 kg - Consumption: Compressed air (pressure 6 bar, 30-40 m3/h) - Electricity: 380V, 50Hz, 3F + ground - Installed power: 1kW - Operating conditions: Bag dimensions: Width: min. 130mm - max. 450mm Length: min. 300mm - max. 650mm - Maximum dimensions of product: Height: min. 40mm - max. 220mm Width: min. 50mm - max. 260mm Length: min. 150mm - max. 425mm Weight: 8 kg Cycles per minute: 20 Number of employees: 1 (employee to change bags, products and general inspection) 2) Vacuum packaging machine VR8610 FUROCAVA (CRYOVAC, 2004) TECHNICAL CHARACTERISTICS: - 4 rotary chambers for continuous flow of products at different speeds - Flow of products of different forms and dimensions, is carried out quickly and without use of s ...

Description GEA Westfalia Cream Separator MSE 75-01-177[tel:75-01-177] , this machine is used for cream separation and clarification of milk. This machine has been purchased new in 2004 by a very well know dairy keeping the service contracts and condition of there machines in place. The machine has been working until 2024 December. Technical Details Make : GEA Westfalia Model : MSE 75-01-177[tel:75-01-177] Year of Manufacture: 2004 Serial Number : 1723-725 Usage : Cream Separator Capacity : 7500 L/h full skimming Capacity : 10,000 L/h Clarification Full Skimming : 0.01% Tools : Included Controls : Included Condition : Good

Pile feeder - separating head 2 buckles 1 knife Noise hood Batch counter LCD touch-screen control Belt delivery Sheet size : 490x650 mm - min. 120x172 mm (only Parallel fold) - min. 105x172 mm (with special equipment) - min. 174x174 mm (with cross fold) Fold length: min. 58 mm Paper weight : 40-250g/sqm Pile height : 590 mm Speed : 180 m/min

grinding height: 60 mm grinding width: 120 mm grinding wheel diameter: 600 mm grinding length: mm workpiece height: 60 mm total power requirement: 50 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 ______________________________________________________________________ ________ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 1 ...

cutting diameter: 250 mm saw band length: 3150 x 27 x 0,9 mm table height: 700 mm cutting width: 250 x 320 mm cutting speed: 25 - 90 m/min dimensions of saw-band: 2480 x 27 x 0,9 mm : 120 mm : 120 mm : 190 mm Impact energy: 190 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions: 0,95 x 1,16 x 1,98 m Rock-solid band saw for solid material - Double miter cuts up to 60° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material suggestion The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SHRINK WRAPPER, CRYOVAC, TYPE: CJ 51T LH Technical description: Power supply: 380-440 V / 50-60Hz Power: 15 Kw Bandwidht: 250 mm Clearance: 270 x 130 mm Dimensions: 2100 x 900 x 1600 mm

Worthington Creyssensac RLR208B500G10 Air compressor 2015, air compressor and dryer, 8Bar, mounted on 500L tank, 3Ph

1,216 liter turbo stirrer for spray cream 2 pieces with mixing table Characteristics: Volume container 1 1216 liters Volume container 2 1216 liters material V2A (AISI 304) 1.4301 Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Total height 2700 mm Width 2000 mm length 6000 mm Number of feet 4 Description MJ UNI-HIGH Consists of 3 parts with pedestal Part 1/3 Mixing table Dimension: Length: 1,750 mm Width: 800 mm Height: 1,300 mm Part 2/3, 3/3 per container with a capacity of 1,216 liters Dimension: Total height: 2,700 mm Cylinder height: 1,250 mm Inner diameter: 1,150 mm Container description: Topsoil: Lid with 1/3 flap at the front and back with grid Propeller agitator Underbody: Residual drain pipe connected to line 4 fixed feet on each frame

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 7.750 mm including transmission group, max diam. 3.000 mm.(exceptional transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle type, N.1 loading hopper with conveying screw  ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 20.000 lt. vertical mixers which fill each other through the endless screw conveyor. (ask for different capacities), for each mixer :, total height approx 6.950 mm including transmission group, max diam. 2.380 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters (possible gearbox, instead), inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle typ ...

Three Grundfos multistage high-pressure centrifugal pumps are available. 1) Grundfos CR8 100 A-A-A-AUUE, max. pumped material temperature: 120°C (150°C), speed: 2900 rpm, flow rate: 11m³/h, delivery head: 100m, machine diameter and height: 180mm/600mm, weight: approx. 55kg. 2) Grundfos CR 16-30 A-F-A-BUBE, flow rate: 16m³/h, max. delivery head: 34.4m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/800mm, weight: approx. 60kg. 3) Grundfos CRV2-150 A-O-6-BUBE, flow rate: 2.5m³/h, max. delivery head: 92.2m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/400mm, weight: approx. 60kg. Documentation available. On-site inspection is possible.

Vertical Multistage High Pressure Centrifugal Pump GRUNDFOSNome pump, but part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-Vyear approx. 2012Flow rate at 7.2 bar: max. 10 m3/hDischarge height: max. 91.8 metersGrid connection: 400 volts, 50 HzPower: 3 kW- pump structure in 9 stages- made of stainless steel 1.4401- The pump in mint condition was used as a spare parts dispenser, but there are several new pump chambers- part of the magnetic coupling is missingsuitable for drinking water supply, irrigation

Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used

Clinch unit TOX - Pneumatic-Hydro Tox pressHydro-pneumatic press TOX Pressotechnik POWER PACKAGEType type CRS 03.62No.: 207599.2Year of construction approx. 2005Pressure capacity: max. 80 kN = 8 tonProjection: 20 mmInstallation height: 32 mm- Built-in clinch tool- pneumatic valve for control- Push-through joining or clinching- For making a form-fit connection of 2 sheets without perforating or heating the sheets- Mounted on the stand- with the simplest electrical control and Foot switchWeight: 230 kgComes from

Two identical circular saws Cremona for the veneer production industry are available. Working width saw 1: 4200mm, working width saw 2: 5100mm. An on-site inspection is possible. Sale of individual units is possible.

A double planer Cremona including a log turner and an optional milling head is available. Working width: 900mm. An on-site inspection is possible.

A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible.

Pressure filler Ortmann + Herbst/Crown Simplimatic 100/15/15 with 100 filling valves, 15head crown corker and 15head Zalkin aluminium cap screw capper with Pick and Place System model: Hansa M year of construction: 1999 running direction: left - right pitch: 113 mm with double pre-evacuation capacity: up to 40,000 bph by 250 ml mineral water bottles up to 30,000 bph by 330 ml beer glass bottles electrics: Siemens S7 with touch panel with safety cladding

Height=0.33 m, Overall length= 0.4 m, Overall width= 0.52 m, Net weight= 56 kg,

Height=1.03 m, Overall length= 0.65 m, Overall width= 0.7 m, Net weight= 70 kg,

Height=1.88 m, Overall length= 3.2 m, Overall width= 1.1 m, Net weight= 900 kg,

A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Vemag servo crimper in very good condition incl. accessories

MITUTOYO Crysta Apex CRT-A910 coordinate measuring machine was built in Japan by Mitutoyo Corporation. This extremely advanced machine, characterised by the highest accuracy and objectivity, is used for highly accurate workpiece measurements. Workpiece measurements are performed using the contact or non-contact method, which are then represented as a set of coordinate points. The use of this method makes it possible to measure parts with very complex shapes, which cannot be measured with ordinary measuring instruments. The MITUTOYO Crysta Apex CMM measuring machine is offered with a PC with software. Technical specifications of the MITUTOYO Crysta Apex CRT-A910 measuring machine - measuring range in the X/Y/Z axis: 900/1000/800 mm - measuring resolution: 0.1 µm - measuring speed: 300 mm/s - PC with software - compressed air pressure: 0.4 MPa - compressed air consumption: 50 l/m ...

Cramer LS 5000 Leaf Vacuum Manufacturer: Cramer Model: LS 5000 Model year: ZIXMM Type: Leaf Vacuum / Leaf Blower Vacuum Weight: 70 kg Speed: 3600 rpm Use: Pick-up and shredding of leaves and light garden waste Features: robust used device with high air flow, mobile and suitable for commercial use Location: Bremen

Three room air filtration units CRT RoomGuard are available. Air volume flow: 2000m³/h, pre-filter: F7, main filter: HEPA H14, max. efficiency (aerosols/viruses): 99.9%, machine dimensions X/Y/Z: approx. 1300mm/800mm/700mm, weight: approx. 110kg. Documentation available. An on-site inspection is possible.

12 WINDERS, BARMAG CRAFT WINDERS CW6-1200/ 6 ENDS PER CHUCK , max. dia 440mm, stroke 170 mm

Komptech Crambo 5200 Direct Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447184 Power: 328 kW/446 hp Weight: 26 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: 3-axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)