132,173 used machines on RESALE, but how to find them? Machine Search
ERD Column Drill Type B35/40 -Manufacturer Ing. Ewald Riens, Junior, Bodenburg via Hildesheim -Machine type ERD B35/40 -Column drilling machine design with gear drive -Drilling performance in steel up to 50 mm -Spindle holder MK 4 (Morse taper 4) -Quill stroke 190 mm -Projection (spindle to column) 325 mm -Column diameter 140 mm -Table size approx. 565 × 565 mm -Table adjustment height-adjustable, rotatable (360°) -Speeds (spindle) 6-stage, manual via belt / lever - 670 / 470 / 295 / 210 / 150 / 90 rpm -Note on speed switching: Switching only in the outlet -Feed types: Manual and automatic feed -Feed speeds 0.1 / 0.2 / 0.3 mm per spindle revolution (switchable during the run) -Motor power 2.2 kW (three-phase current) -Supply voltage 400 V -Cutting speed table SS drill for material ST60 available (operating note) Dimensions: LxWxH: 0.9x0.5x2.05 meters / Weight 800 ...
Builder: GREEN TECHNIK Model: BS 750 PTO Engine: 66 kW (90 HP) Data: L. 5.700 mm x W. 1.920 mm x H. 2.900 mm Year: 2003 Hourly Production: 25 m³/h Shredding System: 64 HAMMER
Laser cutting machine Trumpf TruLaser 3030 with TruStore 1030 and SortMaster - Laser power 5000 watts. - Year of construction 2010 - Thin Sheet Productivity Package - Nozzle changer - Cross conveyor belt - Tilting container for transverse conveyors - LiftMaster Store - Extension Sort (1000 x 600) - Extended partial removal from 600 x 600 - Integrated sheet metal alignment - Separating thin sheet - Sliding gate bifly - SortMaster - Rotary unit + extended partial removal 1000 x 600 infinitely variable - Additional gripper long parts - Extension of magnetic suction - TruStore 1030 - Storage/retrieval station with trolley - 10 layer compartment 90mm + pallet - 5 pallet bottoms - Saulenverkleidung - Warehouse interface Available from the end of the year or at the beginning of next year. Errors in the technical data and prior sale excepted.
Type: Clipper Tipper Tie Made completely of stainless steel and robust industrial plastics Easy to clean due to smooth surfaces Inclined surfaces to improve drainage of water S-clip on reels S-Clip: S 625, S 628, S 632, S 638 Dimension of the machine: Width: 100 cm Depth: 78 cm Height: 180 cm Power input: 0.1kW Fuse Connection: 2.5A Compressed air: 4-6 / 0,4-0,6 MPa Delivery time: 1 working day after payment
Reducer Concentric AGRU/TRACEABILITY 250/160 SDR 1
Reducer Concentric AGRU/TRACEABILITY 90/75 SDR17
Dough pre-portioner W&P for WP BV-700 dough dividing machines - Dough pre-portioner from WP Haton - for WP BV 700 dough dividing machines / dough weighers - with pedestal and ladder - in stainless steel - Year of construction 2014
Cooling capacity: 315 kW (12/7 — 35°C) Heating capacity: 350 kW (40/45 — 7°C) Year of manufacture: 2017 Options: Heat pump Heat exchanger: Plate Refrigerant circuit: 2 pcs. Compressors: 4 pcs. Danfoss (scroll) Type of refrigerant: R410A Working hours: 4692-7121 h Dimensions: 5.60 x 1.85 x 2.15 m Weight: 3230 kg Condition: Excellent Product quantity: 2 pcs.
1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1991 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled, with loading and unloading winch
The name mentioned is technical specifications for a C-bracket used as an accessory for Tucker stud welding systems (from Stanley Engineered Fastening). These brackets are usually used on automated welding heads or manual welding guns to generate the back pressure during the welding process. Technical Breakdown The letters and numbers describe the geometric dimensions of the C-bracket: a 150: Usually stands for the projection (depth) of the bracket of 150 mm. e 220: Refers to the opening width (internal width) between the legs of 220 mm. d 60: Usually refers to the diameter or thickness of the bracket material or the holder (60 mm). m 212115: This is the manufacturer's specific material number or article number for the unique identification of the spare part. Bossard Bossard +1 Application area These C-brackets are part of the Tucker SWS (Stud Welding System). They are mainl ...
Stock number U2387-1 Used mixing station for liquids. Station consist of vertical stainless steel mixing tank with total volume 1300 l. Internal diameter 1170 mm x length of straight side of wall 1140 mm. Bottom elipsoidal, with central discharge outlet. Tank is mounted on three stainless steel legs, on tension cells. On side walls there are welded four baffles. Mixing is provided by homogenizing agitator by IKA (DE) model Turrax UTC TMP 150 / 2KT, driven directly by 11 kW, 2915 rpm, 380/660 V, 50 hz. Length of the shaft 900 mm x diameter of mixing die 150 mm. Agitator is mounted on stainless steel supporting frame. Discharge from tank is provided by sinusoidal stainless steel contact parts pump by Masosine Process Pumps model SP 25, working on pressure up to 15 bar. Working rotation up to 600 rpm. Pump is driven by 2.2 kW, 1400 rpm, 220-380 V, 50 hz. Working rotation of drive up to 2 ...
Rutland Sanitiser tunnel Stainless frame, overall length 3000mm, belt width 370mm, max product height 500mm, variable speed, 3Ph
Treif bread slicer Type: Discus 400 Circular knife digital control Year of construction 2010 Cutting width: 4 – 20mm with storage compartment 400V 50Hz Weight approx. 200kg Height: 110cm Width: 82cm Depth: 72cm
Catalog No. : 5889 Type: VU 2313 Producer: TRIMILL Made in: 2010 Characteristic: Control system: HEIDENHAIN iTNC 530 Table dimensions: 1800x1800 mm Maximum table load: 18000 kg Number of axes: 5 pcs Total hours: 68.648 h Hours on: 41.293 h Travel length X-axis: 2300 mm Travel length Y-axis: 1300 mm Travel length Z-axis: 1000 mm Number of tools in the magazine: 10 pcs Max. pindle speed: 10000 1/min Max. Tool diameter: 110 mm Max. tool lenght: 450 mm Max. tool weight: 12 kg Power of the spindle: 25 kW Tool clamping: HSK-A 100 Weight: 38000 kg Equipment: Turntable Milling head Chip convoyer 2x Probe HEIDENHAIN and BLUM
Machine Type: Bastra Smoke chamber for 1 trolley Electric heating: 28 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without after-burning system Installation dimensions of machine in cm: Width: 175 Lenght:120 Height: 210 Trolley dimensions in cm: 100100200 height Delivery time: 30 working days after advanced payment
We offer a paternoster LTG-TowerMax P 13.8-300-46-210-6500 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 6,500 mm Overall width 3,670 mm Installation depth 1,560 mm 46 carriers with a payload of 300 kg each in clear usable dimensions: H = 210 mm W = 3,050 mm T = 520 mm Chain jump 254 mm 23 galvanized intermediate floors for 150 kg payload each Total payload up to 13,760 kg Side table in 1000 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/dark grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries
Format range: 1400 x 1400 mm stack height 1300 mm Equipment: motorized format setting via remote control, pneumatic lateral alignment, Siemens control, Non-stop setup. Overhaul 2022: cleaned, tested, painted. Other: Stackers can be viewed in operation by arrangement.
Mint only 300 operating hours. Can be viewed on site. Dip-Tech GP Series – Industrial Digital Printing Machine for Glass (Ceramic Printing) Bjbsypllcjn Efavpscw High-end digital printing system for architectural, automotive and specialty glass The Dip-Tech GP Series is an industrial digital printing press for ceramic direct printing on glass. Developed for heavy-duty production, it combines the highest print quality (720 DPI), high speed (up to 33 m²/h) and maximum flexibility for glass formats up to 2400 x 6000 mm (depending on model). Thanks to the patented Drop-Fix system (air convection technology), the ink is optimally fixed – for finer details, sharper lines, reduced colour gradients and excellent colour brilliance. Technical highlights: ✔ 12 printheads / 720 DPI ✔ Up to 33 m²/h production capacity ✔ Glass thicknesses: 2–19 mm ✔ Glass sizes: 80 ...
Hello, We hereby offer you a used articulated telescopic work platform on wheels (telescopic aerial platform) from the manufacturer TEREX AERIALS, type TA30N Boom Lift. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: TEREX AERIALS Type TA30N Boom Lift Built in 1999 Operating hours 887 hours Transport dimensions retracted 4.20 x 1.22 x 2.12 m (L x W x H) Curb weight 4800 kg Max. height of the floor of the working cage 9.14 m Max. working height 11.14 m Max. working width 5.20 m Outer turning circle 3.50 m Max. climbing ability 20 % Max. travel speed, boom retracted 4 Km/h Max. travel speed, boom extended 0.75 Km/h Safe load capacity (2 persons) 225 kg Max. noise level 70 dbs at 3m Operating Temperature Range -5°C to 40 ...
(Serial No. M12/42), Flatpile Feeder, Overhead Control Panel, 4 Pockets, 1 Cross Fold Knife, Delivery
Treif bread slicer Type: Discus 400 Circular knife digital control Year of construction 2010 Cutting width: 4 – 20mm with storage compartment 400V 50Hz Weight approx. 200kg Height: 110cm Width: 82cm Depth: 72cm
used
Manufacturer: Pasilac Therm AS Denmark Type: N-35 Year: 1985/ 2022 Output: P624236 60 hl/h
Siemens Multix TOP ACSS with the following system components: Generator Polydoros IT 55 Tube Opti 150/40/80 HC 0.6/1.0_Bj. 2013 (ceiling hanging) Vertical tripod Vertix TOP • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the man ...
Specifications: - working width 4080 mm - max. cutting capacity St 40 6 mm - hydr. Cutting angle adjustment - man. Cutting gap adjustment - Stroke rate depending on cutting angle and cutting length approx. 20 - 25 per min - Backgauge with positioning control ELGO 10 - 1000 mm - Cutting length adjustment - 17 pcs. Hydraulic hold-downs - front angle stop - front support arms - Drive 400 V / 9 kW - Foot switch - Space requirement without support arms approx. W 4450 x H 1900 x D 2300 mm - Weight approx. 10500 kg
Eppendorf Mastercycler ep Gradient S PCR/Thermalcycler 96 well-plates or tubes heatable lid Graphically programmable Ramp rate 6C/sec, cooling 4.5 C/sec Temperature range 30C to 99C, lid 37-110C Temperature constant +/- 0.2 C
-Manufacturer: TESSA -Capacity: 1500 Btls/h -Filling Machines - Two Pcs -Labeling device ( Self- adhesive labels) -Shrink tunnel -Set of conveyers -PET Bottles blowing machine -Mold for blowing PET bottles 1 l -Mold for blowing PET bottles 0.5 l
Reed 40” x 16” Two Roll Mill Hand operated nips Right angle drive Tray fitted beneath Mill Rolls
; Gross weight [kg]: 7000; Engine: Volvo TWD1683GE-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Stage V Generator, Stage V Aggregaat, Stage 5 Generator, Stage 5 Genset, Stage V Gen set, Stage V Generator set, EU Stage V Generator, StageV, Including : coolant heater and battery charger; Water Tank Volume [l]: 985
; Gross weight [kg]: 3840; Engine: Volvo TAD882GE-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1800
X=3500mm Y=2000mm Z=1250mm W=800mm H=360° spindle 130 mm, ISO 50, max. 1600 rpm table 1600 x 1800 mm with a load of 12000 kg with Siemens electric and CNC Heidenhain TNC 415B Oil cooled: Schimpke. Dismantled. The machine has been used very little = in very good technical condition.
SPECIFICATIONS: Sweeping width mm: 600 Complete with: 01 Longitudinal brush 01 Side brush 01 Battery charger As good as new
; Power [PS]: 489; Gross weight [kg]: 4000; Engine: Volvo TAD1344GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515
; Gross weight [kg]: 3700; Engine: Volvo TAD1343GE; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 576
Warranty, delivery, installation, samples and training included in the price.
Machine number: 412303.77361.102736 Current type: 3-PE, 50\60 Hz Operating voltage: 380-480 V Control Voltage: 24V Ratet current: 10-8 A Supply line fuse: 16 A Ratet power output 4,5 KW
maximum number of results exceeded
please refine your search
