130,804 used machines on RESALE, but how to find them? Machine Search
Omam second hand line width 2000 mm for PP corrugated sheet extrusion Plastic • Omam extruder diameter 150 mm / 30 D • Main Extruder motor: Siemens DC motor 410 kW • 2-ways continuous filter change FCF 120-2V complete with hydraulic power unit • Melt pump Alfatech AT80 with motor and control panel • Omipa T-Die 2180 mm wide with thickness 5mm and pitch 5,9 mm • Nr.02 T-Dies 3mm thick / 4mm pitch • Caliber with anodized aluminum plates, complete with 5,5 Kw air blades and 3 vacuum pumps 1,1 Kw (x1), 2,2 Kw (x2) • Take-off roller – equipped with 8 rolls, 330 mm diameter, rubber coated, 5 Kw motor • Oven: 2500 mm wide, power 48 kw, infrared, with control unit • Ferrarini & Benelli Corona treatment complete with GTS8 15Khz generator and 2 fans for ozone extraction (0,25hp) • Cooling unit with 6 fans • Take off rollers - 4 rolls, 330mm diameter, rubber coated, 5 Kw ...
AUTOMATIC CUTTING SAW machine for solid wood model OMEC TA 185 second hand machine working conditions : Excellent CE mark : YES Instruction Book : YES with rollers tracks ( as in photo ) n.03 pneumatic stop with blade diam.mm.550 motor power Hp 7,5 volt. 380/50
used
Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop
used
Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop
HACO OMATIC 130 DTRH punching machine was built in 2014 in Belgium. The machine is used to punch various size shapes and holes in workpieces weighing up to 150 kg and having a maximum thickness of 6.5, a width of 1500 mm and a length of 4000 mm. The machine operator manually operates the punching machine by loading the workpiece on the working table and changing the punching tools using a special device offered in the price of the machine. The punching process takes place on the brush table of the punching machine, which significantly reduces noise levels and adequately protects the sheet metal surfaces against various types of scratches and nicks. Depending on the choiceed mode, the machine performs between 1,000 and 1,500 punches per minute with a press force of 30 tonnes. The equipment includes amongst others a TPC 69C Graphics CNC controller for graphical programming of the desire ...
automatic double mitre saw OMS SALVARANI INVINCIBILE OK 330 CE standard : Yes n.02 motors . power Hp 3 each one blades diam.mm.330 max. useful cutting length mm.3000 max. useful cutting width 90° mm. 165 max. useful cutting width 45° mm. 115 max. useful cutting heigth mm.115 volt. 380/50 weigth kgs.650
Technical details: Plate length: 3,000-1.250 mm Plate width: 1,250-1,000 mm Plate thickness: 40-250 mm including separation, stacking incl. div. milling pictures incl. documentation last usage: 2015
OMSO DM144/ 6 LIDS, 6-Color Lid Printer, only used for 26,000 hrs ! Infeed Conveyor for feeding Vertical Lid Stacks Robotic removal of Lids from stack to Print Conveyor Auto-Denester Unit No Lid no Ink and No Lid no Print System ARCOTEC CG20-2 Pretreatment station Main 6-Color Print Unit Speed Control for Ink Fountain Rollers Printing Roller self-cleaning device Max. speed 30,000 Lids/ hr (depending on Lid size & shape) Max. Lid dia. Ø 200 mm Min. Lid dia. Ø 50 mm Max. Lid Height 25 mm Max. Rectangular Lid size: 200 x 200 mm Max. Printing dimensions: 180 x 180 mm No. of Printing Blankets 4 UV Tunnel TUV 0077-99 UV-Tunnel power rating : 8 kW Main printer power rating: 20kW Polytype Counter/ Stacker unit delivers Counted Lid Stacks. 400 V 3phase, 50 Hz, Printing Plate Pre-registration Unit. with Monitor Display
Ersatzteile für Spritzgießmaschinen Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile gebrauchte Hydraulikmotoren Danffos OMR OMS OMT OMTS OMV used Danfoss OMR OMS OMT OMS OMV hydraulic motors used hydraulic motors Danffos OMR OMS OMT OMTS OMV 151-0208 125 OMR OMS OMT OMTS OMV 151-0242 80 OMR OMS OMT OMTS OMV 151-0243 100 OMR OMS OMT OMTS OMV 151-0244 160 OMR OMS OMT OMTS OMV 151-0245 200 OMR OMS OMT OMTS OMV 151-0246 315 OMR OMS OMT OMTS OMV 151-0247 250 OMR OMS OMT OMTS OMV 151-0248 50 OMR OMS OMT OMTS OMV 151-0265 50 OMR OMS OMT OMTS OMV 151-0266 80 OMR OMS OMT OMTS OMV 151-0267 100 OMR OMS OMT OMTS OMV 151-0268 160 OMR OMS OMT OMTS OMV 151-0270 315 OMR OMS OMT OMTS OMV 151-0271 250 OMR OMS OMT OMTS OMV 151-0297 315 OMR OMS OMT OMTS OMV 151-04 ...
No 2 circular blades motors HP 3 - 2800 rpm No 5 drilling units motors HP 1 - 2800 rpm No 1 conveyor belt feeding machine HP 0,5 - 1400 rpm Pneumatic movements with hydraulic brake Stacking / Destacking device with pneumatic cylinders Electro-pneumatic machine control with PLC: Overall dimensions: -Length Mm: 2500 (useful for cutting and drilling) -Height Mm: 1400 -Width Mm: 1800
A) Total grinding units: 02 - longitudinal - bottom Grinding units total: 02 - transverse - top - bottom B) Total grinding units: 02 oscillating - right C) Total grinding units: 02 oscillating - links D) Orbital grinding unit total: 02 Complete loading
Dimensions mm: 3200 X 2200 Milling depth mm: 35 Total connection KW: 1.2
Longitudinal Splicer Manufactured by FISHER+RÜCKLE
Hollow-chamber plate system Material: PC, PP Extruder: Breyer Screw diameter: 120 mm, L/D: 33 Engine: 200 kW with degassing, Siemens "Simatic OP17" PLC control, vacuum station with water ring pump and condensate pots, sieve changer Gneuß SF75, melt pump Maag 56/56, calibrator OMIPA 2400 mm, 10-fold multi-roll extractor OMIPA, 2 roll extractor OMIPA, protective film laminating station, hot-knife longitudinal separation, OMIPA cross saw 2400 mm R
Icecream Homogenizer YOM 1996 Only used for 1 year 160l/h, 180 bar Very good condition
Siemens Sinumerik 3G, 6FC 3741-OMA-Z Not checked for functionality. Sold only to traders! All information without guarantee
sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1070 mm diameter of upper rolls: 130 mm total power requirement: 4,0 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
For sale offer you lattice floors. specifications: Width: 890mm Depth: 1120mm Number of stiffeners: 3 pieces Load capacity: 500kg for cartons, 1,000kg for pallets Weight: 7,2kg/pc. Price per piece 18€ net Product immediately available Shipping worldwide Offer is valid until stocks last. If you are interested, please contact us to confirm the availability of the product.
For sale offer you lattice floors. specifications: Width: 890mm Depth: 1120mm Number of stiffeners: 4 pieces Load capacity: 500kg for cartons, 1,000kg for pallets Price per piece 20€ net Product immediately available Shipping worldwide Offer is valid until stocks last. If you are interested, please contact us to confirm the availability of the product.
Technical data Max mechanical speed: 190 mpm (630fpm) Max. web width: 370 mm (14"4/8) Flexo Printing repeat range: from 5,5" to 24" Maximum flexo printing width: 360 mm (14"1/8) Maximum die cutting width: 360 mm (14"1/8) Web tension: max. 30 kg Drivers and motors: Emerson - Control Techniques Regulations: "CE" Mark Die cutting repeat range: from 8" to 24" (suggested form 12") Substrate thickness range: min 12 micron (0.5 mil) only PET - max. 250 gr/m² Standard machine voltage: 400 V AC three phase + 50 Hz + Earth - Automatic tension unwinder, for rolls up to 1000 mm(40") diameter,with integrated roll pick up from the floor - Servo driven infeed section,with automatic web tension control - Web guide - DUAL SERVO flexo printing stations with chilled impression cylinder for straight through short web path - Automatic pre-register 360° - Outfeed and rewinding section wi ...
Four rollers calander make OMEC Mod. FX4 190 1330 x2.5 / 3.0 Year 2019 NEVER USED - PRACTICALLY NEW Siemens CNC.
1 Wire bending machine OMCG date 1997 technical status good , soft ware to be refurbished 2.Tube bending machine OMCG date 1998 technical status good, software to be refurbished
SPECIFICATIONS: Engine power HP: 3 Vertical leadership support Replacement tools available
Swing Chiselstemmer Measuring machine Stemmer swing chisel
Manufacturer: OMGA Type T55 300 Saw heigth: 75mm saw length 135mm Saw: ø300mm Saw spindle: ø30mm Motor: 1.2 kW Toerental 3000 tpm Dust extraction: 80mm incl. fan Condition: Full Functional
Country of origin: Italy Saw blade Ø mm: 425 Mitre range right: 60° Mitre range left: 90° Rotational speeds m/min: 13 + 26 Weight approx. kg: 900
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 0.55 kW -Input: 200-240 V 50/60 Hz 7.4 A -Output: 0-240 V 0-400 Hz 3 A 1.1 kVA -Number: 11x available -Price: per piece -Dimensions: 170/70/H185 mm -Weight: 1.3 kg
Servo motor, electric motor, DC motor -Spare part comes: from a machining center BJM type ALBZ-145 -Max. Speed: 2500 rpm -Power: 3.97 kW -Torque motor: 21 Nm -Construction: B5 -Number: 2x motors available -Price: per piece -Dimensions: 370/140/H175 mm -Weight: 19 kg/piece
Veneering press OMC PL 105 LC 30/13 Water Work surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature 85 degrees Control system logic contorl Machine control from touch panel readings Temperature, pressure force, shelf opening time, loading area calculator, programming of gluing processes Power 21KW CE Certificate Production 2023 Machine available on request New machine Net price
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 0.55 kW -Input: 200-240 V 50/60 Hz 7.4 A -Output: 0-240 V 0-400 Hz 3 A 1.1 kVA -Number: 2x available -Price: per piece -Dimensions: 126/68/H140 mm -Weight: 0.8 kg
Solid state relays, switchgear, switching components -Type: G3PA-210B-VD -Input: 5 to 24 V DC -Output: 10 A at 24 to 240 V AC -Price: per piece -Number: 2x available -Dimensions: 100/27/H100 mm -Weight: 0.2 kg
Code: 0005 Brand: OMMA / OTHER BRANDS 2300 Model: 2300 Nr 2 rubber-coated rollers Technical data Length mm 2300 Diameter mm 230 Rifling 3,4 x 1 cm / 9 x 1" (inch) Overall dimensions of wooden crate for 2 rollers: mm 3000 x 900 x 550 h Weight kg 800
Country of origin: Italy Saw blade Ø mm: 425 Weight approx. kg: 900
Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder for: Pallet stacker, make: OMG, type 214EA -Cylinder made of: stainless steel -Piston: Ø approx. mm -Piston rod: Ø 45 mm -Stroke: 110 mm -Dimensions: 120/160/H310 mm -Weight: 8.4 kg
Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Voltage: 24 V -Power: 2 kW -Manufacturer: Kostov -Serial number pump: KAD 2419 -Dimensions: 142/170/H390 mm -Weight: 9.9 kg
Chassis, electric motor, DC motor, traction motor, drive motor -Chassis for pedestrian stacker make: OMG type 214EA -with: recording and drive -Dimensions: 270/350/H285 mm -Weight: 38 kg
hydraulic motor, oil motor, hydraulic pump, hydraulic valve -Manufacturer: Danfoss, hydraulic motor with: valve block -Manufacturer hydraulic motor Danfoss type: OMP 315 151-0033 7 -Valve block: Hawe SK.7356-160/160 -Shaft: Ø 25 x 40 mm -Dimensions: 240/130/H200 mm -Weight: 9.8 kg
Country of origin: Italy Saw blade Ø mm: 425 Mitre range right: 60° Mitre range left: 90° Rotational speeds m/min: 13 + 26 Weight approx. kg: 900
maximum number of results exceeded
please refine your search
