133,956 used machines on RESALE, but how to find them? Machine Search
Key data: 3000 kN
Battenfeld HM 300/2250S with the Wittmann W818 robot / Machine in very good technical condition / Operating hours: approx. 40,000 h in automatic mode Year of Make: 2007 Injection unit: Screw diameter: 55 mm Injection weight: 702.5 g Spray pressure: 2500 bar Dosing volume: 772 ccm Clamping unit : Clamping force: 300 t Spar spacing: 710x630 mm Size of the clamping plates: 1030x1020 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 8 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection New original screw and barrel are installed in the machine Robot Wittmann W818 4-axis, high-speed robot: ...
Key data: 1500 kN
Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with the Rotary Molding Machine Year of Make: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Spray pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Spar spacing: 0x0 mm Size of the clamping plates: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Vertical Injection Molding Machine with the Rotary Molding Machine Hybrid machine: high-speed, energy-saving and very quiet Air Valve x 5 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Rotary table diameter: 1500 mm Rotary table driven by a servo motor, controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83x1.50x4.07 m All offered machines ...
Key data: 1300 kN
Battenfeld BA 1300V/315 V-R / Vertical Injection Molding Machine with the Rotary Table Year of Make: 1997 Injection unit: Screw diameter: 40 mm Injection weight: 182.9 g Spray pressure: 1575 bar Dosing volume: 201 cc Clamping unit: Clamping force: 130 t Handlebar spacing: 454x740 mm Size of the clamping plates: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 4000 Additional equipment: Air Valve x 5 Hydraulic core pull x 1 Rotary table: 1250 mm The vertical injection unit - screw diameter fi 35 mm Dimensions: Weight: 7500 kg Length/Width/Height: 3.83x2.33x4.16 m Drive: Pumps/motor: 18.5 kW Heating capacity: 8.98 kW Total power: 27.48 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live te ...
Key data: 1500 kN
Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating Hours: approx. 29,000 in automatic mode Year of Make: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Spray pressure: 1714 bar Dosing volume: 442 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x470 mm Size of the clamping plates: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6P - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total number of operating hours: 36,714 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 6600 kg Length/Wid ...
Key data: 1100 kN
Wittmann Battenfeld EcoPower 110/350 / Electric motor / Operating hours: approx. 15,000 in automatic mode Year of Make: 2019 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 682x682 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B8 - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 21,800 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Dimensions: Weight: 4800 kg Length/Width/Height: 4.91x1.42x2.10 m ...
Key data: 1100 kN
Wittmann Battenfeld EcoPower 110/350 with the Wittmann W818 robot / Electric machine / Operating hours: approx. 16,000 in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 169 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 680x660 mm Ejector: electric Clamping unit: toggle lever Control:UNILOG B8 - Touch Screen Additional equipment: Perfect technical condition Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Parallel movements The machine was servi ...
Key data: 1000 kN
Battenfeld TM 100/525 Year of Make: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Dimensions: Weight: 3900 kg Length/Width/Height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participa ...
Key data: 1000 kN
Battenfeld HM 100/525 with the Battenfeld R10S robot / Operating hours: approx. 19,000 in automatic mode Year of Make: 2008 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Handlebar spacing: 470x420 mm Size of the clamping plates: 680x663 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: approx. 19,000 in automatic mode Total number of operating hours: 26,580 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Battenfeld R10S robot Year of Make: 2015 5-axis robot: 3 axes are driven by servo motors (electric); Axis B - pneumatic, Axis C Robot with adapter Purchase of the r ...
CNC press brake Type: APH-S 3106×120 Manufacturer: Baykal Year: 2005 Control: Delem DA 66W (graphical 2D programming) Press force: 120 t Working length: 3100 mm Automatic calculation of the bending sequence and collision detection X-axis rear stop with 2x manually adjustable stop fingers CNC electromotoric rear stop height adjustment (R axis) CNC electrically controlled table deflection ROLLERI upper tool adapter Equipment and accessories: Front protection device (hinged door) Rear protection device (sliding door) 1× freely movable two-handed / foot control User manual including CE declaration Machine in good condition, fully functional, under power Find more here - / Contact us at -
filling amount: 250 l basket dimensions: 550 x 270 x 75 mm dimensions of the machine ca.: 1,25 x 0,85 x 1,24 m BALTIC METALL - 6957 Dive Wash Unit - Immersion Tank Dimensions: 595 x 395 x 500 mm - Draining Area Dimensions: 470 x 350 mm - 2x Storage Rack Dimensions: 480 x 360 x 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Width 45 cm Year of manufacture 1997 flexible sword folding unit MS 45 Self-control Delivery date: immediately Price on request. Worldwide Delivery & Installation
Geared motor FARMER Type BF50-04/DHE11LA4 Volt 3 chamfer 400 volt 4 KW 56 RPM Hole 50 mm IE2 L 60.00cm W 30.00cm H 50.00cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Farmer Type BG60-11/D11LA4 3 chamfer 400 volts 5.5 KW 58 RPM Shaft 50 mm L 75cm W 35cm H 35cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
General SKUR0456 MakeAZO GmbH & Co KG (D) LocationBarneveld TypeAZO Emptying system AZO Batchtainer 700x1005 Main Features MaterialMild steel Number of1 heads Specified Features - Powder filler MaterialMild steel Powder fillerEmptying system Information No.1269665 Year of construction2015 Floorspace1,3x0,9 M Total height0,7 M Extra SpecificationsThis pick-up station is used for discharging product from a container of type AZO Batchtainer This machine is equipped with 2 JVM vibration motors 0.4 kW 380/420 Volt For opening the Batchtainer, a pneumatically driven rotary mechanism is mounted Powder fillersAZOPackaging machines > Powder fillersBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherla ...
General SKUR0455 MakeAZO gmbH & Co KG LocationBarneveld TypeAZO Emptying system AZO Batchtainer 700x1005 Main Features MaterialMild steel Number of1 heads Specified Features - Powder filler MaterialMild steel Information No.1269665 Year of construction2015 Floorspace1,3x0,9 M Total height0,7 M Extra SpecificationsThis pick-up station is used for discharging product from a container of type AZO Batchtainer This machine is equipped with 2 JVM vibration motors 0.4 kW 380/420 Volt For opening the Batchtainer, a pneumatically driven rotary mechanism is mounted Powder fillersAZOPackaging machines > Powder fillersBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld ...
General SKUR0453 MakeAZO gmbH & Co KG LocationBarneveld TypeAZO Emptying system AZO Batchtainer 700x1005 Main Features MaterialMild steel Number of1 heads Specified Features - Powder filler Powder fillerEmptying system MaterialMild steel Information No.1269665 Year of construction2015 Floorspace1,3x0,9 M Total height0,7 M Extra SpecificationsThis pick-up station is used for discharging product from a container of type AZO Batchtainer This machine is equipped with 2 JVM vibration motors 0.4 kW 380/420 Volt For opening the Batchtainer, a pneumatically driven rotary mechanism is mounted Powder fillersAZOPackaging machines > Powder fillersBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...
pressure: 035 t chamfer lenght: 1250 mm distance between columns: 1070 mm piston stroke: 150 + 60 mm column arm: 410 mm table height: 800 mm dayligth: 470 mm working feed: 10.0 mm/sec return speed: 70.0 mm/sec table width: 140 mm Control: ELGO NC Number of working hours: ~ 9.600 h oil volume: 80.0 l operating pressure: max. 240 bar voltage: 380 V total power requirement: 4.0 kW weight: 2200 kg range L-W-H: 1800 x 1450 x 2150 mm Well maintained condition With only approx. 9.600 operating hours () Features: - Robust NC-controlled hydraulic press brake - With ELGO NC control unit P8822” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Swiveling control panel, front left - NC electric motorized backgauge (X axis) With 2x stop fingers, manually adjustable (R+Z axis) - 1x split set of pointed tools - top - 1x rotatable Multi-V die block - Side saf ...
cutting diameter: 320 mm saw band length: 3400 x 27 x 0.9 mm capacity 90 degrees: flat: 320 x 400 mm capacity 45 degrees: flat: LI 320 x 280 mm capacity 45 degrees: flat: RE 320 x 260 mm capacity 60 degrees: flat: RE 320 x 140 mm band speed: 35 + 70 m/min work height max.: 930 mm voltage: 400 V total power requirement: 2.67 kW weight: 950 + 250 kg range L-W-H: - mm well-maintained condition () current new price incl. accessories ~ 40.000 Euro special price on request Equipment: - electro-hydraulic vertical mitre bandsaw - with large cutting range and small footprint - Robust material support table - miter cuts are carried out fully automatically electro-hydraulic miter adjustment left right - Up to 99 cutting programs - Central operation of all machine functions from the front - Loading also possible from above - Precise positioning thanks to accurate measuring system - electro-hydra ...
Key data: 1600 mm, 2000 mm, 1500 mm
Inv. Num. : 8971 Type: BT 1600 S2 Producer: TOS HULIN Created: 2018 Parameters: Switch-on hours: 11910 h Max. turning diameter: 2,000 mm Face plate diameter: 1,600 mm Max. workpiece height: 1,500 mm Max. workpiece weight: 12,000 kg Speed range faceplate: 2–315 rpm (2-stage infinitely variable control) Main drive SIEMENS: 58 kW Max. cutting force: 45,000 N Working stroke ram: 1,060 mm Feeds: Working feed: 1–4,000 mm/min Rapid traverse: 12,000 mm/min Feed per revolution: 0.001–50 mm/rev Threading: 0.01–400 mm/rev Dimensions and weight: Machine height: 5,655 mm Space requirement incl. protective cover: 8,685 x 5,325 mm Total weight: approx. 46,000 kg
Used Used Wraparound Baumer 35 ppm: Year: 1997 Condition: Good Used Wraparound Baumer 35 ppm Year: 1997 Speed: 35 ppm Formats: From 24 (6?4) 33cl and 50cl Inlet transport and bottle divider missing Only for cans Safety protections Code: JL 225 More details: https://bottlingscout.com
Used Used Case Packer Wrap-Around Baumer Flex 512/3: Year: 2013 Condition: Good Used Case Packer Wrap-Around Baumer Flex 512/3 Year: 2013 Speed: 25 box per minute (8/9.000 bph) Model: flex 512/3 Type of closure: glue Type: with hives inserter Motorization of the independent suction cup arm Type of hives insertion: from below Possibility of use with or without hive inserter: yes Alimentation: voltage: 380v. / 50hz. 3 phases | neutral | earth Air pressure: 6 bar Consumption 40 nl/minute Gluer: preo Storage: capacity 300 boxes Safety protections: yes Code: JL 232 More details: https://bottlingscout.com
Used Used Bag In Box Line 3 LT 2012: Year: 2012 Condition: Good Used Bag In Box Line: Case erector: Sacmi Packaging EC 25 ? 2012 Ultra Clean filling: Sacmi Pakim FB-2 ? 2007 Closing: Sacmi Pakim C.R.C.E. bib ? 2007 Handler: Sacmi Pakim ? 2007 Speed on the format 3 LT: 1.200 pz/hour Equipped for 3 liters Safety Protections Gluer Case Erector MELER Micron 4/2 120P ? 2012 Gluer Closing machine MELER Micron 4/2 100P ? 2007 Conveyors boxes included Codice: OP 10 Code: OP 10 More details: https://bottlingscout.com
Used Used Wrap Around Baumer 2010: Year: 2010 Condition: Good Year: 2010 Speed: 20 BPM Model: WA FLEX 534/90? Infeed: 90? Gluer: PREO EASI 5 Suitable for round and shaped bottles Current formats: 4?3 round bottle of 0.75 lt 3?4 rectangular bottle of 0.35 lt Workable case formats: min mm240x150 H 115 max mm 420?300 H 350 Safety protections: yes Code: JM 102 More details: https://bottlingscout.com
Used Used Shrink Wrapper Baumer: Year: 2002 Condition: Good Used Shrink Wrapper Baumer Year: 2002. Speed: 20 bundle per minute. Model: avvolgitrice flex Film launch system (film only). Safety protections. Code: F 35 More details: https://bottlingscout.com
Used Used R.Bardi Returnable Bottling Line: Year: 2009 Condition: Good Used R.Bardi Returnable Bottling Line: Model: Victoria 5G Year: 2009 Speed: 1.500 BPH Safety protections Cap unscrewer: Bottle-Washer Macero Material of construction: total steel 6 file 23 washing stations Filler 6 valves with flow meter Capper (including cork elevator) Single head Type of workable cap: plastic pressure cap Cap size: ? 55 mm Code: NP 685 More details: https://bottlingscout.com
Key data: 700 mm
Band saw Bäuerle Roll diameter 700 mm APA guides at the top and bottom! Runs great! Guided tours in a first-class condition Used machine Accessories lots of band saw blades
General SKU210X061 MakeTycon LocationBarneveld CEcheck TypeBE 4000 Pressure Working pressure20 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume4000 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity5425 l., (4000 l.) Vessel sizesDia. 1700x2300 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionscheck OutletDN100 With jacketcheck 550 l. Max. temperature-25°C/+200°C With propellor stirrercheck Motor15 kW, 400 volt, 1450 rpm, (Ex) Speed mixing shaft20-120 rpm Glass Reactors MaterialGlass - Enamel Information No.9950 Year of construction2002 Floorspace2,0x2,0 m Total height5,30 m Weight6700 kg Extra Specificationsreactor comes with outletvalve. a hastelloy spray ring is installed in the reactor. Glass-lined ReactorsTycon ItalyReactors > G ...
Planetary agitator ALEXANDERWERK, type: WR 40 -in good condition- Stirring, beating and kneading dough, meat and frothy masses - Machine was rarely used - Powerful agitator with powerful motor - Bowl for 40 litres capacity - Tank car included - Kettle included - Including 1 whisk and 1 flat beater - Cover / protective cover made of plastic - Lever for raising and lowering the mixing bowl - Stepless speed adjustment - El. Connection: 380 V, 50 Hz, 3 Ph, 1.1 kW, 3.0 A - Dimensions: W 570 x D 912 x H 1,210 mm - Weight: approx. 180 kg Volume specifications of various products: - Egg whites (1l = 30 eggs): whisk, 6 litres - Cream: Beater, 18 liters - Mayonnaise: Beater, 12 litres - Mashed potatoes: whisk, 24 kg - Bisquick base: whisk, 16-20 kg - Bread dough 50%: dough hook, 18 kg - Sand cake: Stirrer, 24 kg The machine has been completely checked and is in very ...
s/s-style, adjusted for filling and closing of vials/bottles 2 filling stations for steady objects, object-dia for round objects 16-100 mm, for flat objects 16x16 - 100x100 mm, h 35-310 mm, according to change parts Output max. 3,000 objects/h according to product Filling area 0.3-540 ml/bottle according to pumps, with 2 one after the other installed s/s-rotary piston pumps each 2 pumps each 8 - 50 ml Single filling (max. 50 ml) and step filling (max. 100 ml) possible with existing pumps Drip retraction 1 Hand-over station for screw caps dia 22,0 x 20,5 mm with screwing tool and sorting bowl Change parts for bottle-dia 24,2 x H 63,7 mm, dia 28,6 x H 71,5 mm, dia 37,7 x H 92 mm 2 sets dosing needles, each 2 pcs, several dia PLC Klöckner Möller PS4-201-MM1, touchscreen Eectr. connection 220/380V/50Hz
The BA150E is a 6-inch mobile wastewater pump suitable for pumping contaminated water with particles up to 80 mm in diameter., This centrifugal pump is equipped with its own vacuum system and is therefore dry self-priming., Mounted on a fully hot-dip galvanized, stackable frame., , Drive: Electric motor, Discharge x suction: 6 x 6, Max. capacity: 430 m³/h, Max. delivery head: 24 mwc, Free passage: 80 mm, Vacuum system: MP50 (50 m³/h), Version: Dry self-priming, Motor: 22 kW, Poles: 4, Frequency: 50 Hz, Starting method: Soft starter, Voltage: 400/690V, , Do you have any questions? Please contact us for a personal consultation., , Throughput capacity: 400 m3/h, Max dirt passage: 80 mm, Motor brand: Hansa-Motoren, Max. head: 24 MWK, Weight: 1250 kg, , = More information =, , Year of manufacture: 2014, Applicable material: Water, Empty weight: 950 kg, Connector size: 6 Inch, Cargo space ca ...
Ref. no.: 18588 Hersteller: BATTENFELD Year of construction: 2007 Clamping unit Clamping force: 30 ton Distance between tie bars: 300 x 300 mm Mould height min.: 150 mm Mould height max.: 330 mm Opening width: 580 mm Platen size (h x v): 450 x 450 mm Injection unit Screw diameter: 18 mm Injection volume: 19 cm³ Shot weight: 17,5 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 1,1 x 1,9 m Machine weight: 2700 kg Further information: BATTENFELD EM 30/55 UNILOG B6 All-Electric Precision Injection Moulding Machine The offered BATTENFELD EM 30/55 UNILOG B6 is an Austrian-made all-electric injection moulding machine designed for applications requiring high precision, low energy consumption and stable production performance. The BATTENFELD EM series was considered one of the most advanced servo-electric injection moulding technologies of its time. All main machine move ...
Additional independent injection unit with its own supply and control system
Sawblade width max.: 120 mm Weight: 350 kg Motor output: 1,3 kW WINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-AB PNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness. Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding. Technical specifications: - Band Saw Width 15-120mm - Tooth pitch Max. 60mm Tooth depth 0-30mm - Tooth forms PV,NV,KV,PU,NU - Hook angle -10° to +30° - Feeding rate 0-90 teeth/min. - Motor quantity 2 - Grinding wheel motor – 1.1kW, 1400 r.p.m. - Gearbox motor double-rev. – 0.55kW, 1400 r.p.m - Grinding wheel diameter Ø250mm - Grinding wheel bore diameter Ø20mm - Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch) - Operating voltage 400V, 3Ph, 50-60Hz - Total power ~1,3kW - Dimensions 80120175cm - Net/gross we ...
Roll bending machine manufactured in 2020. This Metallkraft GBP BASIC 26100 features a pressing force of 100 tons and a maximum bending length of 2600 mm. It is equipped with an 11 kW engine and has an oil tank capacity of 150 liters. If you are looking to get high-quality bending capabilities, consider the Metallkraft GBP BASIC 26100 machine we have for sale. Contact us for further details.
power capacity: 1,5 kW volt: 380 V ampere: 5,75 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 1,1 kW volt: 380 V ampere: 2,8 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 2,2 kW volt: 380 V ampere: 5,3 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2-position pneumatic piston filling machine as an add-on dispenser, Filling volume: up to 250 ml, Output: up to 2,000 containers per hour, Frame: stainless steel, Dimensions: approx. L x W x H = 1,200 x 1,000 x 1,400 mm, Connection value: 380Vac, 50Hz,, Compressed air > 6 bar, Miscellaneous: bottle stop with positioning device (the bottle is filled in 2 stages), Stainless steel control cabinet, Storage tank with V2A lid and agitator, the system was overhauled in 2014 by Lenssen in Holland and equipped with a new control system. It was used to fill glass bottles with salad dressing., filling volume: up to 250ml, Filling volume: up to 250ml, a slight vacuum is drawn and the pouch sealed.: up to 250ml
Cherry stoner, make Baskaya, model BM - CC-IA, year 2020, The machine removes stones from cherries without destroying their natural shape., Plunger stoner, compatible with the FERRUM stoner., Output: approx. 800 - 1,400 kg/h depending on product quality and calibration., Version: stainless steel,, Dimensions: L x W x H: approx. 3,500 x 1,300 x 2,000 mm,, weight: 1,250 kg,, electr. Connected load: 4 kW.
VWS Nederland – Top/Base Labeling Machine (R → L), Manufacturer: VWS Nederland, Type: Top / Base Labeling Machine (Right → Left), Year of manufacture: 2017, Description, The VWS Nederland Top/Base Labeling Machine is designed for automatic labeling of products on both the top and bottom sides. The system operates from right to left (R → L) and is suitable for integration into automated packaging and production lines., This labeling system is commonly used in the food, pharmaceutical, and consumer goods industries where accurate and consistent label placement is required., Technical Specifications, - Manufacturer: VWS Nederland, - Machine type: Top and bottom labeling machine, - Labeling direction: Right → Left (R → L), - Label positions: Top and base (bottom), - Year of manufacture: 2017, - Application: Automatic labeling of trays, containers, and packaged products, - Integra ...
Bäuerle pull saw with support table left/right and stop. 400mm circular saw blade Cutting depth approx. 450mm Year of construction unknown 3KW
CLOSING MACHINE BAUSCH+STROBEL KS-1025 Fully automatic intermittent-motion closing machine/crimper for vials and cylindrical glass, plastic or metal containers with up to two different types of closure. Includes separate electrical panel (300 kg, 800 x 600 x 2100 mm). Built in 1996. PRODUCTION - Output: up to 4200 units/h - Processable types of closure: rubber stoppers; droppers; screw caps; pilfer-proof caps and crimp caps; special closures with pipettes; pump spray assemblies; child-proof closures DIMENSIONS - Size (mm): 2200 x 1600 x 1800 ca. - Weight (kg): 1500 ca.
An ultrasonic cutting machine is offered. 180mm full-wave titanium blade, cutting shapes: rectangular, triangular, diamond-shaped, round products, sheet dimensions X/Y: min. 300mm/200mm max. 600mm/400mm, round products: min. 220mm max. 260mm, cutting height max.: 120mm, production capacity: approx. 120sheets/h, integrated cleaning station and drying function. Inspection possible by appointment.
This 6-axis BACCI TWIN CNC Wood Machining Centre was manufactured in 2001. It features an impressive X-axis travel of 3400 mm, Y-axis travel of 1500 mm, and Z-axis travel of 1000 mm. The machine is equipped with 4 milling heads that can reach speeds of up to 24,000 rpm and includes 2 tables and 2 vacuum units. If you are looking to get high-quality wood machining capabilities, consider the BACCI TWIN machine we have for sale. Contact us for further details.
Item condition: in working order Availability: as of now Year of construction: 1999 Year of construction Eberhardt: 2013 Technical data: Output adjustable: 4 rows up to 3600 pieces/h, 80-160gr. 5-row up to 4500 pieces/h, 40-90gr. 6 rows up to 5400 pieces/h, 40-90gr. Connected load: 1.87 kW, 2.1 kVA Performance and weight ranges are indicative. Depending on the dough and proofing, the values may vary. Dimensions in mm Stuppling system Cutting machine A 1020 1215 B 890 890 C 1600 1600 D 1700 1700 E 2720 2420 F 2810 2730 Pre-proofing zone, plunger station and automatic stacker in one compact unit: After rounding, the dough pieces are automatically placed in the robust pre-proofing hanger. A ...
A complete cut-off grinding system is available. Product length range: 750mm-1400mm, product diameter: 75mm/100mm, max. deflection at 1400mm: 10mm, tolerance at 75mm: +/-5mm, tolerance at 100mm: +/-9mm, operating hours: 20653h. System components: 1) Cut-off grinding machine Harald Baumgarten. 2) Bundle loader Sema Systemtechnik. 3) Bar breaking unit. 4) Bar rotating drive and measuring station. 5) Weighing station with cut piece sorting. 6) Extraction and filter system. 7) Soundproof cabin with safety fencing. 8) Four-column press Winter. 9) Hydraulic unit with pumps. 10) Control cabinet and operator panel. Documentation available. An on-site inspection is possible. Expected to be available from May 2026.
2002 Fold length: max. 36 cm; min. 5 cm Paper weight: 40 - 250 g/m² Power supply: 230 V / 10 A Underfloor vacuum feeder PBA with integrated alignment table 2 pockets Total counter Control panel Double sheet control Size: max. 35 x 45 cm min. 8.5 x 12 cm In production Located: Germany Available: immediately
Embossing force: 40kN Heater: 2280 Watt with cabinet - ideal embossing press suitable for book cover, die-cuts from leather, imitation leather and cloth, as well carton and und carrier bags, flat plastic parts - embossing surface 15 x 21 cm - autom. foil feed
This machine is a batch butter churn which produces butter from cream obtained in a previous process from raw milk by separation. The cream is beaten and pushed in a rotating cylinder, forming butter granules which separate from the buttermilk during the process. The buttermilk is continuously skimmed until pure butter remains as the final product. Total volume: 550 liter - cream in max: 275 liter - output butter: 137,5 kg per batch. Manhole on the side for filling / emptying. Motor: 2,8 kW - 1.460 rpm - 380 V - 50 Hz. New simple control panel with frequency converter for speed adjustment by simple button click, forward/reverse switch, emergency stop and main switch., Type of Machine: Butter Churn, Volume: 550 liter, Capacity of butter: ± 137,5 kg/batch, Diameter of the drum: 85 cm, Length of the drum: 100 cm, Motor: 2,8 kW - 1.460 rpm - 380 V - 50 Hz, Year of Major Service: 2024, Opera ...
maximum number of results exceeded
please refine your search
