mtu ba 500 used for sale

geared motor, electric motor -Speed: 13 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54/65 -Weight: 17 kg

geared motor, electric motor -Speed: 315 rpm -Power: 0.073 kW -Design: B3 -Shaft diameter: Ø 14 mm -Protection class: IP 54 -Weight: 7 kg

electric motor, three-phase motor -Power: 0.37 kW -Speed: 1400 rpm -Shaft diameter: 14 mm -Brake -Design: B5 -Protection class: IP 54 -Weight: 11 kg

BATTENFELD TM 1300 injection moulding machine was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection moulding method, in which plasticised plastic is fed into a mould and then closed with high press force. In order to achieve parts with high repeatability and durability, the machine uses many reliable components with excellent parameters, including a high-precision mould clamping system operating at a force of up to 130 tonnes. All this is complemented by the intuitive UNILOG B4 CNC control with its many useful functions, which allows programming of the operating modes in just a few steps. The TM 1300 injection moulding machine weighs 7000 kg. Technical specifications of the BATTENFELD TM 1300 injection moulding machine - CNC controll ...

geared motor, electric motor -Speed: 70 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 4x motors available Price: per piece -Dimensions: 460/204/H210 mm -Weight: 18 kg

Ref. no.: 16369 Hersteller: BATTENFELD Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg

Geared motor, electric motor, three-phase motor -Speed: 50 rpm -Power: 0.12 kW -Design: B3 -Shaft diameter: Ø 16 mm -Protection class: IP 54 -Weight: 6 kg

Offer 24295 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - Projection 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Motor back gauge with positioning control 20 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 rpm - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm - Space required including back gauge, without front support arms -ca. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - E-foot switch - Cutting Line Illumination - - Cutting Length Selection - Rear area protection with light barrier

Cap conveyor, feeding system, closure conveyor, closure conveyor system, dosing container, crown corker, screw caps. 4 chambers. Conveyor bunker silo for crown corks screw caps conveyor conveying system, 4 chambers, cabins, boxes.

Inductive sensor Manufacturer: Balluff -Type: BES 516-324-S4-C -Condition: unused stock -Quantity: 4 pieces available Price: per piece -Weight: 0.1 kg

Reform Bautz Compact MF60 machining center :::TECHNICAL SPECIFICATIONS::: CNC Model: Selca - CNC Version: 4045PD - Tool Holder: HSK 63 - Spindle Speed: 18000 Number of tools: 99 - X-axis travel: 1380mm - Y-axis travel: 600mm - Z-axis travel: 500mm - Swivel rotary table: yes Swivel rotary table type: continuous Table size: 710 x 710mm Allowable load on the board: 700Kg High refrigerant pressure: yes Chip conveyor: belt Presetting: yes Other technical data: Machine with granite base Machine equipment: Renishaw probe ready :::D DIMENSIONS AND WEIGHT::: Weight: 12000Kg

Row limit switch, push button, limit switch -Type: BNS 519-D03 R16-100-10-FD Price: per piece Quantity: 2 available -Weight: 1 kg

Pressure valve, pressure gauge, pressure indicator, manometer -Measuring range: 0-6 bar -Fitting: Ø 63 mm -Thread: M12/1.5 mm -Price: per piece -Quantity: 10 available -Weight: 0.2 kg

Inductive sensor Manufacturer: Balluff -Type: BES 515-356-E4-Y -Quantity: 30x Available Price: per piece -Weight: 0.2 kg

Used boiling kettle BASTRA, 400 L - Heating type: Electricity - With separate MC 30 control - Boiler capacity: 400 litres The unit has been serviced annually and is in good condition. More pictures and information on request. Visits and test runs are possible by arrangement.

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 -Clamping sleeves: 28 mm Price: complete Quantity: 10 available -Weight: 15 kg

Terminal boxes, aluminum housings, housing systems, Klippon -Type: 07-5107 -EX: protected Price: per piece -Quantity: 7x Available -Weight: 0.4 kg

- ideal embossing press suitable for book cover, die-cuts from leather, imitation leather and cloth, as well carton and und carrier bags, flat plastic parts - desk model - embossing surface 15 x 21 cm - autom. foil feed

Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5500x1400x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L, built 2026 --------------------------------- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beam ...

rated capacity: 2000 KG ram hammer stroke: 1080 mm throat: 1100 mm impact capacity: 10000 kgm no. of strokes: 125 Hub/min ram hammer weight: 2300 kg work height max.: 620 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m Steam drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: . kg taper MK: . height: 350 mm flute distance: 255 mm thickness of jaw: 80 mm Jaw extension with claw boxes for carousel latheJaw height 80 mmJaw width 80 mmGroove spacing 255 mmHeight 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain type: TNC 530 i milling head -swivable: CNC turning speeds: 4000 U/min conus taper: DIN 69871+AD mm spindle drive: 46 kW Feed: 10000 mm/min Rapid movement: 25000 mm/min chip conveyor: 2 St. coolant: filter unit: Plate area: 31000x2500 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of Lo ...

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 kg workpiece length - max.: 6500 mm weight of the machine ca.: 600 t dimensions of the machine ca.: 120x30 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 125 mm coil weight: 2x 0,8 t coil internal dia.: 300-500 mm coil outside dia.: 1200 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: BxTxH 2000x2000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor -Speed: 15/31 rpm -Power: 0.2/0.3 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 450/210/H200 mm -Weight: 24 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4.5 rpm -Power: 0.25 kW -Diameter shaft: Ø 40 mm -Construction: B3 -Protection class: IP 65 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 650/290/H320 mm -Weight: 50 kg

hydraulic unit, hydraulic pump, hydraulic pump -max. pressure: 200 bar -Liter output: 6 l/min per pump -Drive: 0.55 kW 1360 rpm -hydraulic tank -Number: 4x units available -Price: per piece -Weight: 95 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Hydraulic unit comes from a 15 t lifting platform -Max. pressure: 130 bar -Tank capacity: 100 liters -Motor: 7.5 kW 1450 rpm -Equipment: Emergency hand pump, hand valve, electric valve, emergency drain, -Dimensions: 1130/445/1320 mm -Weight: 334 kg

Net weight: 750 kg

Contactor BALKANCAR, EDZ KB-2 BDS 6012-74 660 V 50 Hz 32 A Control voltage: 42 V 50 Hz IP00 BALKANCAR spare part ! used, tested !' Dimensions: 170 x 80 x 70 mm

Three-phase electric motor with brake BALKANCAR, ZAE KK 1204 - 4A ( KK1204-4A ) 0,0,0 18 kW 1440 rpm 220 / 380 V IP44 shaft diameter: Ø 10 mm Flange diameter: Ø 135 mm New !' Dimensions: 220 x 175 x 135 mm

Wire rope hoist, hoist, electric wire rope hoist BALKANCAR T 0243 MA ( T0243MA ) year: 1982 Load capacity: 2000 kg Lifting height: 12 m Lifting speed: 1.1.06 4 / 8 m/min 380 V 3AC 50 Hz approx. 10 m control cable New !' Dimensions: 1100 x 560 x 460 mm Dimensions(wooden box): 1200 x 800 x 600 mm