mtu ba 500 used for sale

Gear motor, electric motor, electric gear motor -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 640/250/H220 mm -Weight: 38 kg

Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: 40 mm -Protection class: IP 65 -Number: 1x engine available -Dimensions: 680/270/H250mm -Weight: 55kg

Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 610/260/H260 mm -Weight: 53 kg

Gear motor, electric motor -Speed: 10.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 54 -Dimensions: -Weight: 59 kg

SPX Bactofuge for Milk Make : SPX Model : SE 355 BX -03 P2 Capacity : 10,000 Litres per hour Y.o.m : 2014 Skid mounted Condition : Very Good Included : Tools , Manual book, control panel HMI touch screen

Geared motor, electric motor, three-phase motor -Speed: 325/650 rpm -Power: 0.075/0.15 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 1x motor available -Dimensions: 400/230/H230 mm -Weight: 24 kg

Gear motor, electric motor -Speed: 54 rpm -Power: 0.55 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Brake -Price: per piece -Number: 2x available -Dimensions: 580/260/H200 mm -Weight: 40 kg

Gear motor, electric motor -Speed: 32.5/65 rpm -Power: 0.18/0.36 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: -Weight: 22.2 kg

Bartscher A120 Convection oven 2012, stainless oven, up to 300,C, timer controls, four trays, 1Ph

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 19.5 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 520/230/H240 mm -Weight: 27.7 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Output: Even speed 1420 rpm -Diameter shaft: Ø 18 mm -Output: Angle speed 32 rpm -Diameter shaft: Ø 32 mm -Power: 1.5 kW -Construction: B5 -Protection class: IP 44 -Dimensions: 620/260/H350 mm -Weight: 51 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Power: 0.6/0.9 kW -Speed: 10/20 rpm -Design: B3 -Shaft diameter: 40 mm -Protection class: IP 44 -Speed: 740/1420 rpm -Dimensions: 660/280/H300 mm -Weight: 61 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 103/420 rpm -Power: 0.36/1.4 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 65 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 580/320/H220 mm -Weight: 42 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 57 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Brake -Dimensions: 640/240/H230 mm -Weight: 41 kg

Gear motor, electric motor, electric gear motor, gear motor for stop, three-phase motor -Speed: 32/196 rpm -Power: 0.16/1.0 kW -Construction: B5 angle -Diameter shaft: 35 mm -Protection class: IP 54 -Dimensions: 560/310/H180 mm -Weight: 46 kg

Gear motor, electric motor, electric gear motor -Speed: 19.5 rpm -Power: 0.25 kW -Diameter shaft: Ø 25 mm -Construction: B5 -Price: per piece -Number: 1x available -Protection class: IP 44 -Dimensions: 390/170/H190 mm -Weight: 16 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 25 l/min -Hydraulic tank: mm -Motor: kW rpm -Hydraulic valve -Pressure relief valve -pressure clock -Filter -Dimensions: 500/800/H850 mm -Weight: 248 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 20.5 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 54 -Dimensions: 640/205/H270 mm -Weight: 38 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 21.5 rpm -Power: 0.3 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 65 -Number: 2x motors available -Price: per piece -Dimensions: 450/250/H220 mm -Weight: 25.4 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 78 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Brake -Dimensions: 540/220/H230 mm -Weight: 22 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 55 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Dimensions: 590/229/H250 mm -Weight: 29 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 13 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 35 mm -Protection class: IP 33 -Dimensions: 490/230/H230 mm -Weight: 38 kg

max. ram stroke: 2 - 300 mm groove width: 2 - 32 mm power capacity: 8 kW no. of strokes: 2 - 300 Hub/min throat: ca. 300 mm Max. installation height: ca. 450 mm automatic feeds: 0,01 - 0,15 mm work speed: 0 - 30 m/min return speed: 30 m/min weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,5 x 1,5 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turntable Bausch + Ströbele further information on request

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 19.5/78 rpm -Power: 0.07/0.3 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 455/210/H205 mm -Weight: 22 kg/piece

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 60 bar -Liter output: 5.5 l/min -Hydraulic tank: 450/320/H320 mm -Motor: 0.75 kW 1400 rpm -Hydraulic valve -Pressure relief valve -pressure clock -Dimensions: 520/330/H600 mm -Weight: 100 kg

Electric motor, three-phase motor -Power: 5/7 kW -Speed: 735/1470 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 EX -Brake: with temperature sensor -Dimensions: 920/400/H330 mm -Weight: 175 kg

Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1440 rpm -Wave SW: 17 mm -Construction: B3 -Protection class: EX -Dimensions: 423/290/H240 mm -Weight: 27 kg

Baier Geba 9/A Hot Stamping Machine, 220/380 Volts, 10 Ampere, Embossing Presure: 4 Tons, Stamping Surface 150x230mm, With Motor Driven Foil Feeding Device

Absolute encoder, incremental encoder with solid shaft -Manufacturer: Lenord Bauer -Type: GEL 260-VN00500A000 -Dimensions: 90/90/H120 mm -Weight: 0.62 kg

2 x 300 hl storage tanks, Fabr. Schulz Bamberg, bobbin bottom tanks, 0.9 bar, coolable via 1 cooling zone in the Double jacket, insulated with 130 mm and stainless steel sheet, with manhole in the lower frame, sight glass in the upper frame, with spray head with pulled down cleaning line, outlet pulled forward, ladder bracket, Crane eyelets, height: 4.25m, Ø: 3.95m, built in 2003, expanded

Used Neat Pneumatic Paint Pumps 1" Dispensing quantity min 5 pieces

Nilfisk BA551D Floor scrubber Walk behind scrubber dryer, perfect for floor cleaning,

hydraulic unit, hydraulic pump, hydraulic pump -Max. Pressure: approx. 200 bar -Litre capacity: approx. 6 l/min -Hydraulic tank: liters -Hydraulic valve: -Dimensions: mm -Weight: 36kg

This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is in the machine storage of Plastima Used Machinery. The machine, a model Haul-Off R630/6V, dates from the year 1990. Make: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4,5 kW Pipe diameter max: 110 mm to 630 mm

N. 14 cut bar trolleys Measurements: 1.77 width x 2.07 depth x 2.3 height m. Each slot is calibrated to 10 kg.

5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED

SECOND-HAND 5 AXIS BALESTRINI IDEA 2 – CE RULES - X axis 1800 mm - Y axis 1600 mm - Z axis 700 mm - 4 x 7.5 air cooled Colombo spindles - NUM control. - 2 Pumps 75 mc/h Rietschle - YEAR 2007 - complete with cabin

SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - volt. 380/50 - S/N 333 - year 1995

Hydraulic power pack, hydraulic pump, hydraulic pump -Hydraulic unit comes from a Gildemeister lathe -Drive: 1.1 kw -Speed: 1410 rpm -Max. Pressure: 25 bar -Liter output: l/min -Filter -Hydraulic tank -Dimensions: 500/680/H660 mm -Weight: 98 kg

SECOND-HAND OSCILLATING TWO BENCHES MORTISER MOD. BALESTRINI MICRON - CE RULES - volt. 380/50 - sn AF657 Y11 - year 1998

SECOND-HAND PROFILE SHAPER AND SANDER BALESTRINI CP8/HSC - CE RULES - positions 1-2 milling units - positions 3-4 milling units - positions 5-6 sanding units - positions 7-8 sanding units - positions 9-10 trasversal sanding units - working length mm. 2500 - working height mm. 180 - n. 10 pneumatic locking cylinders - SN 0 133 H2 - CE rules (year 2001)

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 80 bar -Liter output: 18 l/min -Hydraulic tank: liters -Dimensions: 700/355/H830 mm -Weight: 200 kg

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF2 - nc ISAC - perimetral net - volt. 380/50 - year 1996

Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 63 bar -Liter flow rate: 6 l/min -Hydraulic tank: 40 liters -Dimensions: 690/400/H700 mm -Weight: 100 kg

Inv. Num. : 4249 Type: CF 1500/PS Producer: BALLIU Created: 2004 Parameters: Control system: SIEMENS 840D Operating hours: 78000 h Laser power: 3.5 kW Work table length: 3000 mm Work table width: 1500 mm Feed length X-axis: 3000 mm Maximum sheet thickness (stainless steel): 8 mm Feed length Y-axis: 1500 mm Feed length Z-axis: 115 mm Maximum sheet thickness (mild steel): 18 mm Resonator: ROFIN-SINAR DC 035 Resonator has been completely overhauled

Pneumatic pressure switches -Type: 2KA/96x96/0-10 bar -Adjustable pressure: 0-10 bar -Number: 4 switches available -Price: per piece -Weight: 1.2 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -screw connection -Display: 0-10 bar -Number: 2x pressure gauges available Price: per piece -Weight: 2.8 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -screw connection -Display: 0-25 bar -Weight: 2.8 kg