mtu ba 500 used for sale

Control panel, injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press -Hydraulic control block comes from: an injection molding machine -Manufacturer: Battenfeld -Dimensions: 380/180/H300 mm -Weight: 17 kg

BAADER SKINNING MACHINE FOR FISH, TYPE 47. ID 2279 Technical description: Machine number: 10-2211-0047 Working width: 205mm Belt width: 195mm Total dimensions: 2200mm x 900mm x 1200mm

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

Electric motor, three-phase motor -Power: 0.3 kW -Speed: 1330 rpm -Construction: B14 -Protection class: IP 65 -Dimensions: 247/140/H200 mm -Weight: 7 kg

HEADING MACHINE, BAADER 421 Technical description: Machine number: 10-4604-0421 Belt width: 300 mm Lift height: 1050 mm Estimated throughput: 35 fishes/min but varying in accordance with fish size and stillness of the operator Water consumption: 12 l/min Weight: 520 kg Dimensions: 2350 x 1600 x 1750 mm

SEPARATOR BAADER 696 Technical description: Drum diameter 200mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm).

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Dimensions: 330/220/H170 mm -Weight: 9 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 955 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 380/265/H230 mm -Weight: 43 kg

EEL GUTTING MACHINE, BAADER TYPE: 143 Technical description: Serial number: 10-3404-0143 Power supply: 220-380 V, 3 Ph, 50 Hz, 6.5 A, 2.5 kW Clearance: 125 x 110 mm Dimensions: 3000 x 1000 x 1250 mm The BAADER 143 guts eel from 130 to 1200 g, the gutting cut is performed in the usual way. The belly cavity is cleaned by scaper, a suction scoop and a rotating brush, the machine can be adjusted for 3 size ranges. Eel support troughs, scrapers and scoops for the different size ranges can easily be exchanged.

Electric motor, three-phase motor -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 380/250/H270 mm -Weight: 30 kg

FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.

Electric motor, three-phase motor -Foot defective, see photo -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 380/250/H270 mm -Weight: 30 kg

Double hydraulic pump, oil pump, gear pump -Engine power: 11 kW at 1440 rpm -Pump: Ostrta A 16 -Nominal pressure: 160 bar -Flow rate: 16 l/min -Protection class: IP 44 -Dimensions: 670/290/H335 mm -Weight: 99 kg

TROUT GUTTING MACHINE BAADER, TIPO: 140 Technical description: Serial number: 74-9019-0140 Power supply: 380 V, 3 Ph, 50 Hz, 7 A Dimensions: 3050 x 550 x 1240 mm This machine is laid out for gutting trouts of a live weight from 240 to 650 g in a commercial manner. The abdominal cavity is cleanly cut open and the guts including the kidney are completely removed by means of a vacuum suction device. The special design of the BAADER 140 is capable of gutting up to 38 fish/min. The gills can either be removed or retained; this requires an easy adaption.

Three-phase motor, electric motor -Power: 24 kW -Speed: 1480 rpm -Shaft: Ø 55 x 105 mm -Design: B3 -Protection class: IP 55 -Number: 3x motors available -Price: per piece -Dimensions: 760/500/H390 mm -Weight: 251 kg

Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.25 kW -Design: B5 -Shaft: Ø 25 x 60 mm -Bolt circle: 130 mm -Recess: 110 mm -Protection class: IP 55 -Dimensions: 400/160/H220 mm -Weight: 17 kg

BALESTRINI TEAM automatic CUTTING , END MILLING and DRILLING MACHINE machine for joining parts of chairs, living rooms, furniture, etc. the TEAM machine is made up of 3 operating units: 1st unit: circular saw for cutting workpieces to length 2nd unit: spindle moulder for milling 3rd unit: drilling unit with multiple center distance head . there are 9 work programs that can be choiceed and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . all units are operated by a hydraulic pump to obtain adjustable and smooth movements Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 - Boring unit . engine power Hp 3 . max. depth ...

Used truss for a forklift truck from Bauer - Südlon

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter -Manufacturer: INFRANOR -Type: SMD 101/120 -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: Servodrives -Weight: 0.4 kg

FILLETING MACHINE BAADER 35 (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WITHING (22-40 CM) AND OTHER PELAGICS Technical description: Machine number: 10-1363-0035 Throughput rate: 100-200 pieces/min Voltage/Power: 380 V, 3 Ph, 50 Hz, 11 A Dimensions: 3950 x 2600 x 1550 mm Weight: 835 Kg The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482 or 484. A skinning machine BAADER 55 can be att ...

- Clipper Bread Bag Pouch Clip - Clipping machine - with turntable - with high-transport belt

SPECIFICATIONS: Table size: 2200x450 mm (extendable) Installed power: 5 Kw EQUIPMENT: Drive on 3 rollers Accessories

A rotational shear viscometer according to Mooney for performing Viscosity tests (ML / MS 1+X), Stress Relaxation testing, Mooney Scorch, Delta Mooney testing on polymers as well as rubber compounds for quality control, research and development applications.

Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: Ø 250 mm -Short taper mount for: bayonet disc mounting, taper size 8, bolt circle Ø 171.4 mm -Weight: 17 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 112/224 rpm -Power: 0.5/0.7 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 400/220/H205 mm -Weight: 23 kg

Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: Ø 300 mm -Short taper mount for: bayonet disc attachment, taper size 6, -Bolt circle: Ø 133.4 mm -Quantity: 1x disc available -Weight: 20 kg

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 300 mm -Short taper mount for: bayonet disc mounting, cone size 8, bolt circle Ø 171.4 mm -Weight: 30 kg

AUTOMATIC SLOT MORTISER type BACCI MOD second hand machine machine with cast iron structure machine according to CE regulations: YES electronic oscillation speed spindles with inverter max. slots width mm. 120 + thickness max. slots thickness mm. 20 max slots depth mm.80 coller shank mm.16 table inclination 20° spindle motor power: Hp 3 oscillating motor power: Hp 1 spindle rotation rpm 9500 net weigth kgs. 700 volt. 380/50

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Speed: 3000 rpm -Power: 2 kW -Design: B5 -Shaft diameter: Ø 19 mm -Number: 2 motors available -Price: per piece -Dimensions: 500/165/H210 mm -Weight: 9.2 kg

x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain TNC 530i turning speed range - milling: 4000 U/min taper: DIN69871+AD spindle drive: 46 kW feed range - spindle head: 10000 mm/min rapid traverse: 25000 mm/min floor plate size:: 30000x3000 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m Woeking hours: 9332 Machine number: 5619 Chipconveyor: 2x Angle plates: 4x Box table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine condition: cleaned and tested Year of construction: 2013 Main motor incl. Mentor control suitable for KBA RA 106 Delivery date: immediately from stock Price on request. We deliver and install worldwide!

- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder

Multiple limit switches, buttons, limit switches -Type: BNS519-B5D16-100-1 -Price: per piece -Number: 2x available -Dimensions: 170/120/H107 mm -Weight: 2.9 kg

Gear motor, electric motor -Speed: 99 rpm -Power: 0.11 kW -Construction: B5 -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Number: 1x gear motors available -Price: per piece -Dimensions: 300/145/H130 mm -Weight: 5.3 kg

Power converter, power supply, power supply unit, servo power unit -Manufacturer: Baumüller -Type: BUS21-15/30-30-001 -Quantity: 1 available -Dimensions: 400/55/H310 mm -Weight: 4.9 kg

Inductive sensor, electronics sensor -Ø: 6.5 -Connector: M8 -Connection: 10-30 V DC -PNP -36 mm: long -Switching distance: 2 mm -Stainless -Number: 2x available -Price: per piece -Weight: 5 g

Absolute encoder -Hollow shaft: Ø 12 mm -Dimensions: 80/85/H60 mm -Weight: 0.5 kg

I am selling a stacking system HOMAG BARGSTEDT TBH22/D/25/12, built in 2001. Destacking system One-sided guide Spout also suitable for pallets. Postural head vacuum shoe system. Vacuum system (with pump) Automatic loading. Entry table motorized roller system Exit table on the floor with lifting mechanism motorized roller system Exit table front roller system Enters feed roller stazion for quilted material. Security fences fully complete ! Working capacity Approx. 8 cycles / min Available right away. Ready for use, possible to test. With CE certificate and full documentation.

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Price: per piece -Number: 3x available -Dimensions: 395/210/H190 mm -Weight: 7 kg

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 685 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 375/270/H250 mm -Weight: 41 kg

Identification system -Type: BIS F-403 -Voltage: 24 V DC -Dimensions: 130/175/H45 mm -Weight: 0.55 kg

Three-phase motor, electric motor -Power: 1.1/1.6 kW -Speed: 1400/2800 rpm -Shaft: Ø 25 mm -Construction: B3 -Protection class: - -Dimensions: 350/290/H260 mm -Weight: 42 kg

Gear motor, electric motor -Speed: 9.7 rpm -Power: 0.37 kW -Construction: B5 -Brake: 24 V DC -Diameter shaft Ø 40 mm -Protection class: IP 65 -Number: 1x available -Dimensions: 690/300/H230 mm -Weight: 52 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 13.8 rpm -Power: 0.025 kW -Construction: B5 angle -Diameter shaft: 14 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 260/115/H155 mm -Weight: 5 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Electric motor -Motor power: 5.5 kW -Speed: 1435 rpm -Hydraulic pump -Max. Pressure: 60 bar -Liter output: 50 l/min -Dimensions: 720/640/H700 mm -Weight: 145 kg

Gear motor, electric motor -Speed: 55 rpm -Power: 0.18 kW -Brake: 24 V -Construction: B5 -Diameter shaft: Ø 17 mm -Protection class: IP 65 -Dimensions: 395/185/H140 mm -Weight: 12.8 kg

Gear motor, electric motor -Speed: 32.5 rpm -Power: 0.37 kW -Brake: 415 V -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Dimensions: 465/195/H150 mm -Weight: 17.7 kg

Gear motor, electric motor -Speed: 31.5 rpm -Power: 0.25 kW -Construction: B5 angle -Brake: 415 V -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 445/190/H140 mm -Weight: 16 kg

Gear motor, electric motor, three-phase motor -Speed: 45.5 rpm -Power: 0.18 kW -Brake: 24 V -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Dimensions: 430/200/H140 mm -Weight: 15.1 kg

Gear motor, electric motor -Speed: 85 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 410/200/H205 mm -Weight: 17.4 kg