mtu ba 500 used for sale

Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr

M. No.: 1166

Optoelectr. distance sensor BOD002N, BOD 24K-LPI08-S4, Balluff, mint condition -50% Special price The current new price of a similar product is approximately € 900. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 250 hours. Incl. sensor cable with approx. 7m + 5-pin plug M12 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liabili ...

NEW! industrial shredder for pulled meat suitable for beef, pork, lamb, chicken,… content hopper : ± 35L electrical power : 1,47 kW capacity : ± 300-500 kg / h (depending on the degree of the cooking) possibility to place a 200 L eurobin at the bottom of the machine, so the product falls in it.

BARMAG POLYESTER EXTRUSION -SPINNING LINE WITH 12 POSITION / 72 THREADLINES FOR POLYESTER POY MICROFILAMENT YARNS • MANUFACTURER : BARMAG , GERMANY • CONSISTING OF FOLLOWING EQUIPMENT : •1 EXTRUDER BARMAG 12 E 8•SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS3,5 CC/U•SPINNERETTES 100MM DIA, BOTTOM LOADED,DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO•POLYMER MANIFOLD EXTRUDER TO SPIN BEAM•DOWTHERM MANIFOLD FOR SPINBEAM ANDPOLYMER MANIFOLD•QUENCH SYSTEM INCLUDING FINISH SYSTEM,SPINFINISH JETS BY 'KYOCERA'•WITH CONVENTIONAL QUENCHING CABINETS +EVOSEPEED & RADIAL TYPE •TAKE UP UNITS, INCLUDING:•TAKE UP SECTIONS / PLATFORMS / LADDERS•COLD GODETS, ONE PAIR PER POSITION•INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS•YARN SUCTION SYSTEM•12 WINDERS, BARMAG CW6-1200/66 ENDS PER CHUCK , max. dia 440mm, stroke 170 mm

Qty. 1 Second-hand batch-type annealing furnace Mfc.: LOI SAAR Type: natural gas (Hu=3.6 MJ/Nm³) Charging material: square, round dia. 50 up to 200 mm Length: 6.2 m Max. heat treatment temperature: 950 °C Capacity: max. 60 T at normalising 35 T Application: Tempering, stress relieve, normalising Heat gradients: 60 °C/h average (adjustable) Heating zones: 4 Number of burners: 20 Control principle: on/off with digital programmer Temperature precision: 10°C tolerance at 550 °C

Smoke house BASTRA Dimensions: 175x120x220cm Power: 18 KW

Gross volume approx. 18 litres, net volume approx. 12 litres Mixer shaft heatable and coolable Double jacket heatable and coolable Product-contacted parts: stainless steel VA Drive is carried out by chain drive and gearmotor Subject to prior sale - Errors possible

CATALOG NO. 7166 TECHNICAL DATA - loading hopper inlet 810x630mm - rotor working width 620mm - main engine 18.5kW - pump motor 0.75kW - number of knives 30 pcs - knife dimensions 30x30mm - 41mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1800x1170x2000mm - weight approximately 1500 kg ADVANTAGES – German production – like WEIMA WL4 – pressure drawer – autoreverse – unpainted – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 47900 PLN Net price: 10644 EUR depending on the price 4.50 EUR Net price: 12605 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer ...

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

The scope of delivery includes: 01x Stacking crate / Euro container, used Manufacturer: Bekuplast Type designation: Basicline Material colour: grey Product dimensions: 600 x 400 x 320 mm (LxWxH) Internal dimensions: 567 x 367 x 317 mm (LxWxH) Volume: 64.5 l Weight: approx. 2.28 kg / pcs. Material: Polypropylene Handles: closed Front wall: foldable on one side Side version: closed Bottom finish: smooth, closed Note: -Insensitive to acids and alkalis -Cold and heat resistant It is a second-hand item, there may be scratches, dents and traces of use exist. The price shown is the same as the pick-up price incl. VAT per piece! General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which can be queried separately depending on the place ...

Mixing vessel Company: Bäuchle & Sohn N°: 2193/1/2 Built: 1987 Double jacket pressure: 3 bar (insulated) Indoor and outdoor temperature: 150°C Content: max. 400 l min. 50 l Wiper agitator, speed-controlled Jet-flow agitator with 2 stages Temp meter, switchgear Dimensions LWH: 1100 x 970 x 2220 mm Weight: approx. 600 kg

infeed station, pressing station, jogging station, banding station for up to 2 up production, transport to paternoster delivery table format sizes 1 up production 720 x 235 mm, 2up production 335 x 235 mm Bundle Delivery with Pressing Station

M.Bäuerle CAS 52/4 Art; Online folding machine with H+H feeder; 4 folding pockets; 3x Ionosation; Investment table 150cm; Max inlet width 520mm; may also be operated with other investors or upstream systems; Meter reading 4.5 million Online folding system M.Bäuerle CAS 52/4 Art; with feeder H+H; 4 pockets; 3x ionization; feed table 150cm; max.width 520mm; ca be used with other feeders or systems; counter only 4.5 mio.

Key data: 350 , 34 , 22

Manufacturer: Battenfeld Type: Plus 350/75 Built: 2004 Control: Unilog B2 Closing force: 350 kN Closing type: Hydraulic Tie bar ratio: 270 mm Plate size: 470 mm x 285 mm Tool installation height: min. 150 mm max 250 mm Opening distance: 200 mm Plate spacing max.: 450 mm Screw: 22 mm Lifting volume: 38 cc Spray weight PS: 34.5 gram HP Spray pressure: 1627 bar General Engine: 7.5 kW Heating: 2.7 kW Dimensions: 2.3 m x 0.9 m x 1.3 m Weight: 1100 kg Screen text: German / English Additional equipment Robot interface

Key data: 750 , 198 , 40

Manufacturer: Battenfeld Type: BA 750 - 350 TM Built: 2000 Control: Unilog B4 Closing force: 750 kN Closing type: Knee lever Tie bar distance: 370 mm x 370 mm Plate size: 590 mm x 590 mm Tool installation height: min 200 mm max 400 mm Opening distance: 330 mm Plate spacing max.: 730 mm Screw: 40 mm Lifting volume: 220 cc Spray weight PS: 198 gram PS Spray pressure: 1595 bar General Engine: 15 kW Heating: 12.1 kW Dimensions: 3.8 m x 1.3 m x 1.8 m Weight: 3300 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Key data: 1000 , 291 , 45

Manufacturer: Battenfeld Type: BA 1000/525 TM Built: 2002 Control: Unilog B4 Closing force: 1000 kN Closing type: Knee lever Tie bar ratio: 420 mm x 420 mm Plate size: 640 mm x 640 mm Tool installation height: min 200 mm max 450 mm Opening distance: 330 mm Plate spacing max.: 830 mm Screw: 45 mm Lifting volume: 318 cc Spray weight PS: 291 gram PS Spray pressure: 1659 bar General Engine: 18.5 kW Heating: 13.8 kW Dimensions: 4.1 m x 1.3 m x 1.8 m Weight: 3900 kg Screen text: German / English Additional equipment Robot interface Core train: x2

For the gentle preservation of liquid foods with and without carbon dioxide in pre-filled bottles. Depending on the shape of the bottle, between 60-120l/h is possible, control to the desired product temperature or by means of a timer. ccbo2hk Gas spring-supported basin cover, full insulation, on castors with storage compartment, can be used in a wide variety of bottle shapes (milk bottles, beer bottles, preserving jars, etc.), dry-run protection, heat-up phase approx. 1h (20°-90°), standard with perforated metal base, heat holding time adjustable (0-99 min) Specifications: Water capacity ~115 l Weight 143 (= empty weight) kg Height 1 090 (= working height) mm Width 705 mm Length 1080 mm Electrical fuse 16 A Electrical connection 400V 50Hz (3 phases) Electrical power 9.15 kW Nominal capacity l/h up to 120 l/h

Key data: 800 KW, 1000 kVA, 400 V

ENGINE: 12M33D900E310NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 1000kVA) / 800(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 7500kg DIMENSIONS L/W/HEIGHT (MM): 550020002100 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full a ...

Head machine TTW Bavaria dough part and actuator -Head machine Bavaria -Model 512 -5 rows

Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.

Spare parts for raw material shredder Baader 152 (Raw Material Crusher Baader 152). Almost all spare parts are available in stock or at short notice. Alternatively, a new machine can be offered. Please contact us.

Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.

Hot counter + refrigerated counter on undertable with casters Dimensions undertable: H95 x W193 x D76 cm Hot Counter BETEC Execution: Hot counter GN 2/1 230V / 50 Hz Heat output up to 90°C the hot counters are lit up Total dimensions: H55 x W75 x D78 cm Year of Make: 2019 Chilled distribution depot: Bartscher Batida 2/1 Refrigerated display case / cold counter 2 x GN 1/1 with squared glass version 406051 This refrigerated display case / show display case from Bartscher is a guarantee for your good product presentation. Dimensions (W/D/H) cm: 75 x 77.5 x 60 cm Weight: 78.6 kg Capacity: 1 x GN 1/1-6.5 cm height (53x32.5cm) Technical services: Temperature range: +6ºC / +10ºC Version with convection cooling including lighting Connection: Connected load: 230 V /0.29 kW 1 phase / 50 Hz / 16 A with plug in Schuko design ...

Big Bag filling station, filling and weighing system used The system consists of the following components: 1 filling hopper approx. 2300 height 2500 mm 2 stainless steel trough screws 1 tumbling/shaking sieve approx. 1200 height 1900 mm 1 BigBag filling station approx. 1950 x 2400 x 3700 mm 1 control cabinet The Big Pack filling is filled by wheel loader or forklift via a pouring funnel. The filling material is transported via a conveyor screw to a tumbling sieve. From there, transported with another screw to the actual weighing and filling station. The big bags lie on a vibrating floor when filling and are thus compacted.

M. No.: 121

Тypе: FESSMANN BK 2 522 1W Baking chamber with rotating trolley of 360° Heating: electrical Control: DP 11 Width of the basic area: 198 cm Depth of the basic area: 187 cm Corpus height: 251 cm Total height: 298 сm Min. room height: 340 сm Baking trolley dimensions (HxBxT), сm: 198х102х104 Installed power, electrical heating: 88,2 kW Baking temperature: about 230 ° C

Key data: 250 KW, 314 kVA, 400 V

MODEL: EQ-BG312250 ENGINE: WP13D317E300NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 312.5(kVA) / 250(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 2275kg DIMENSIONS L/W/HEIGHT (MM): 311011341450 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with yo ...

Key data: 100 KW, 125 kVA, 400 V

MODEL: EQ-BG125100 ENGINE: WP6D132E300NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 125(kVA) / 100(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 1085kg DIMENSIONS L/W/HEIGHT (MM): 25329501365 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your d ...

The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – clearance between columns: 320 x 320 mm – tool height, min. : 150 mm – opening path: 511 mm – injection pressure: 2022 bar – injection volume: 99 cm3 – injection weight: 90 g – screw  ...

Manufacturer: Samsung Model: Excavator Built: 2004 Dimensions ( L x W x H ): 1700 x 1950 x 2400 mm

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

The machines and lines of the SFM series are designed for processing nested containers such disposable syringes. The dosing station is designed to process liquid products using rotary piston pumps. Depending on machine type and equipment, nests are supplied manually or fully automatically. Filling and closing are always fully automatic. The machines are also designed for vacuum-assisted dosing and insertion of plunger stoppers. This virtually eliminates entrapped air when filling disposable syringes with pharmaceutical product

Fully electronic flour bagging system from 25 to 50 kg. New electronic control IT 6000 E Triple dosing screw 3 x 0,75 kW Pneumatic actuators. 2 x bag nozzle with one-hand clamp. Inlet bin with electronic full/empty sensors. The entire plant has been overhauled and inspected

Perfect binder - cold glue Gantenbein Model Bufalo BAFC-33 Year 1966 Working width 330 mm Speed up to 240 cycles per hour Grinding roller sand paper roll and grinder knife roll Details automatic movement of the wagon Available Direct

Perfect binder - cold glue Gantenbein Model Bufalo BAFC-33 Year 1970 Working width 330 mm Speed up to 240 cycles per hour Grinding roller sand paper roll and grinder knife roll Details automatic movement of the wagon Available Direct

1 BARUDAN double head embroidery machine type BEAT-802T-YS, 2 heads, 7 needles each head, with driver unit SDV-I, BARUDAN SMT keyboard

BAYKAL HNC 4110 hydraulic guillotine shears built in 2019 in Turkey are designed for precision cutting of workpieces with a maximum thickness of 10 mm. The machining process is performed by extremely precise cutting knives with adjustable gap between blades. The all-steel construction combined with a powerful hydraulic system additionally ensure the highest stability and machining performance. The BAYKAL HNC 4110 guillotine shears have been in use for a small amount of time – so far they have worked only 560 hours. The total weight of the machine is 15400 kg. Technical specifications of the BAYKAL HNC 4110 guillotine shears - HMI panel: SIEMENS SIMATIC HMI - maximum sheet metal length: 4060 mm - maximum sheet metal thickness (Rm

We have complete Barmag POY spinning lines, YOM 2004, 2 kinds of widers, ACW 4T 1200/8, ACW 1500/10. each model 48 pos. available very good condition. Serious buyers contact us.

Key data: 150 mm

Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg

4 cyl.-con. Yeast tanks, make BAM, each with 53,88 hl content, 1,5 bar working overpressure, standing on 3 feet (1 foot on weigh cell), in stainless steel mirror polish design, with 3 cooling zones (2x wall and 1x cone), with screwed swiveling cone point, magnetic agitator in cone, ladder hanger at top, Ø: 1.800 mm, H: 2.900 mm. Price: 8.000 € each tank, free load on truck

Year: 1965 Make: SHELL / BADGER N.V. Crude Oil Atmospheric and Vacuum Distillation and Naphtha Stabilizer. Year of manufacture 1965 Process Design by Shell Process Engineering by BADGER N.V. Feed = Original design, paraffinic crude (21 d/month), naphthenic crude (7 d/month), after 2015 Revamp is 100% naphthenic crudes. Crude oil with Total Acid Number (TAN) up to 4,2 (TJP), 3,3 (Laguna), (range of Viscosity = 5,5 – 144 cst/100°C) Throughput max. 12.000 t/d – original design Current Process Parameters (after 2015 Revamp) Atmospheric Distillation: Throughput max. 6000 t/d Operational operating temperature = 355°C Operational operating pressure = 2,5 bar Vacuum Distillation: Throughput = max. 4500 t/d Operational operating temperature = 380°C Operational operating pressure = 0,2 bara Naphtha Stabilizer C-0807: Throughput = max. 2000 t/d Operational operating temp ...

Bausch + Ströbel ESA1001 self-adhesive labeller for ampoules, vials, etc., suitable for containers from 6mm to 36mm diameter, and from 20mm up to 140mm high. Includes format parts for Ø 9,75 x 48 mm high, Output depending on size of container and label up to 15,000 per hour. In 2019 the following upgrades were completed: - New Siemens S7-1500 PLC controller - Centralised touch-screen HMI for control of all parameters - Servo-drive for the label feed - New integrated DC drives and absolute encoder - upgraded safety circuit and guarding to the latest standards

SCHENCK hydraulic power unit type PP250A B Used hydraulic power unit. Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 250 l/min Tank capacity 1.3 m³ Year of manufacture 1996 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent ...

Type Barmix 300 New! complete stainless steel 2 speeds (20 and 40 revolutions per minute) 2 rotation directions 3.3 / 4.4 kw fold-up inspection stairs Safety lid Emptying forward via an emptying flap with CE marking Outer dimensions (L x W x H) : 1,750 x 950 x 1,650 mm (open lid: H: 2,100) Loading height ± 1,350 mm Dimensions Drum (L x W x H) : ± 860 x 670 x 565 mm

Max. size= 42 x 42 cm, Availability= 082023, Plate punch Bacher 425 mm LOT Loaded in truck or container

Max. size= 80 x 60 cm, Availability= 042023, max. plate width 80 cm Punching distance 425 mm Machine No. 2349 LOT Loaded in truck or container

Type Bartumb New! MC control maximum load: ± 380 kg with vacuum pump "Busch" Dimensions (L x W x H): ± 2,200 x 2,100 x 2,500 mm stepless speed from 0 to 9 revolutions / minute a variety of products, as all varieties of salads, meat and fish, can be mixed /tumbled with the Bartumb. + With loading arm for standard car 200L

Mixer Bär AR 40 MK1 40 l bowl– 1 pcs; beater 1 - pcs bowl ang spiral stainless steel; power: 1,1 kW

Plate dimensions: 2500,1250 mm Daylight opening: 400 mm Number of daylights: 1 St. Specific pressure: 2,2 kg/cm² Motor output: 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.