mtu ba 500 used for sale

A labeling system with two rotary tables and a scissor roller conveyor is offered. 1) Fully automatic Küppersbusch wrap-around pressure-sensitive labeling machine, type: ETT 5000-V, version for cylindrical containers with 3-roller system for front and back labeling, rated output: approx. 1200containers/h, bottle travel direction: right/left, bottle diameter range: 40mm-80mm, conveyor length: approx. 2500mm, conveyor width: approx. 82mm, conveyor height: 800mm +/-100mm, Küppersbusch ETT 4301/200 label dispenser, backing paper width: 30mm-200mm, label roll core: 76mm, max. label roll outside diameter: 280mm. 2) Küppersbusch infeed rotary table: diameter: 1000mm, version with V2A stainless-steel tubular frame and plastic plate. 3) Küppersbusch accumulation rotary table, diameter: 1000mm, version with V2A stainless-steel tubular frame and wear-resistant, noise-damping plastic plate. In a ...

Key data: 500 t

Manufacturer: BUCHER-GUYER Model: AEBI 500 Year: 1969 Condition: Used Stock number: 9455 Control system: SIMATIC S 5 (CPUS 115) Compressive force: 500 t Piston diameter: 525 mm Piston rod diameter: 498 mm Stroke length: 412 mm Machine weight: 18000 kg The press underwent a complete overhaul in 1992 (hydraulics and control system). Equipment: Technical documentation Hydraulic power unit Switchgear

table length: 780 mm table width: 500 mm ampere: 60 / 120 A Control: Heidenhain total power requirement: 14,0 KVA weight of the machine ca.: 4,0 t dimensions of the machine ca.: 3,0 x 2,0 x 2,1 m Sinker EDM machine Control: Heidenhain / Erocom Table: 780 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg

Eurotherm Drives DC 590+ SERIES 590P/0035/500/0011/UK/ARM/0/0/0

Control: Manufacture: FANUC 21-M x-travel: 1020 mm y-travel: 510 mm z-travel: 575 mm table-size: 1200 x 500 mm spindle turning speed range: 60-8000 U/min tool magazin:: 24 weight of the machine ca.: 7.5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.61 m, Overall length= 4 m, Overall width= 0.97 m, Net weight= 1043 kg,

Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 500 mm - max. cutting length: 3000 mm - hydropneumatic feed - vertical and horizontal pneumatic profile mounting

Key data: 500 kN, 25 mm

Stock No.: 503615 Manufacturer: ARBURG Type: Allrounder 375 V 500-170 Control: Selogica-direct Year of Make: 2013 Hours: 36163 h Clamping force: 500 kN Min. installation height: 200 mm Max. installation height: 550 mm Plate spacing max.: 302 mm Opening travel: 225 mm Size rotary table D: 900 mm Screw diameter: 25 mm Displacement: 59 cc Spray pressure: 2500 bar Equipment Screen text German Turntable Core pull hydraulic 1x Machine with water battery Machine without material hopper Levelling elements EUROMAP 67 Handling Interface Interface EUROMAP 73 Ejector plate fuse interface Machine dimensions LxWxH: 3m x 1.6m x 3.48m Total weight: 3540 KG

Press force: 16,000 kN Max. ram stroke: 1,700 mm Max. opening between table and ram: approx. 2,450 mm Min. opening: 770 mm Ram plate: 4,500 × 2,500 mm Table size: 4,500 × 2,500 mm Rapid traverse: 350 mm/s Working speed at 66% press force: 23 mm/s Working speed at 100% press force: 13 mm/s Max. return speed: 220 mm/s Max. retraction force: 1,600 kN Ram cushion: Force: 2,000 kN Stroke: 150 mm Pressure plate: 3,650 × 1,580 mm Table cushion: Force: 2 × 1,000 kN or 3 × 500 kN Stroke: 300 mm Pressure plate: 1,550 × 700 mm Drive: Main motors: 2 × 132 kW Motor filter unit: 4 kW Motor speed: 1,500 rpm Suitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces.

Hydraulic press with a pressing force of 5,000 kN or 500 t. Manufacturer: Maschinenfabrik EXNER GmbH & Co. KG Type: EXSBRD 500ET Machine No.: 10461 Year of manufacture: 2001 Max. stroke length: 1,300 mm Max. opening: 1,800 mm Min. opening: 500 mm Table size: 2,550 × 2,000 mm Frame passage: 2,570 mm Tool dimensions: 2,200 × 1,800 mm Max. tool weight: 25,000 kg Working speed: 26 / 50 mm/s Rapid traverse speed: 400 mm/s Overrun distance: 97 mm Overrun time: 158 ms Safety distance: 252 mm Drive power: 159 kW Oil capacity: approx. 2,800 liters

Tip height: 100 mm Center width: 500 mm Grinding wheel diameter: 300 mm Max. speed grinding wheel 2,825 min-1 Rotatable grinding head 90° left and right Max. workpiece speed: 750 min-1 Spindle cone MK 4 Tailstock 3-jaw abrasive chuck 125 mm Face Plate 160 mm Collet chuck ER 40 with collet set 28 pcs. Fixed grain tip Grinding wheel flange with grinding wheel Wet grinding equipment

Key data: 470 A, 550 , 60

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 500 with grooved table ---------------------------------- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----------------------------------------------- Motor with ...

Complete disassembly Cylindrical grinding machine STUDER RHU 500 – MIRA Retrofit We have a complete exploded view from a STUDER RHU 500 cylindrical grinding machine, ideal for spare parts, repair or maintenance. The machine has been dismantled by MIRA Retrofit, specialists in the reconstruction and modernization of grinding machines, preserving its main assemblies and components for sale as spare parts. Available, among others: - Workpiece holder head and its components. - Tailstock headstock. - Grinding head and grinding assemblies. - Motors and drives. - Spindles and mechanical elements. - Trolleys, guides and moving elements. - Steering wheels, controls and mechanisms. - Hydraulic and pneumatic components. - Electrical elements. - Protections, supports and accessories. - Different original STUDER parts. Sale by individual components or possibil ...

Technical data: Design: GR90 Volume flow: 15,243 m³/h Negative pressure: 2,608 Pa Motor power: 18.5 kW Motor : 34 A / 19.6 A Rated Voltage: 400V/690V Frequency: 50 Hz Motor: 1,470 rpm Weight: 440 kg Dimensions: 1,645 x 780 x 1,670 mm The sale is carried out on behalf of the owner from his location. The fan is handed over in the same condition as existing, excl. warranty.

Bookbinding press for gluing Muro 4 x 5000 A3/HAD - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Bookbinding press for gluing Muro 4 x 5000 A3/HAD Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Bookbinding press for gluing Muro 4 x 5000 A3/HAD Price: 3600 EUR Download PDF Bookbinding press for gluing Muro 4 x 5000 A3/HAD Solid construction, waterproof board, galvanized elements. Machine in very good condition. Technical data: Format: 525x320x525 (width/depth/height) Number of stations: 4 Power supply 230V Power consumption max 4kW Weight 142kg High pressing  ...

Morey Ø 500 mm Strokelength: 200 mm Table dia: 500 mm Depth of throat : toolholder -- column: 600 mm

High-pressure pumps Dynajet 500 me , NEW, Operating pressure: 500 bar, Flow rate: 15 l/min, Drive: electric 15 kW, 400 volts, Operating hours: approx: 1, Trolly, incl. accessories,

The machine is a wrapping machine for paper reams, operating principle: electromechanical-pneumatic, max. mechanical speed: 16cycles/min, average format changeover time: approx. 1min, max. roll diameter: 1000mm, core diameter: 150mm, roll width: 600-1600mm, wrapping paper: kraft and poly, wrapping paper grammage: 80-150g/m², roll change time: approx. 3min, processable formats width: 297-1000mm, length: 420-1400mm, max. height: 80mm, min. height with head folding: 25mm, min. height with top folding: 15mm, ream weight: 4-40kg, minimum grammage of paper reams: 60g/m², control: electronic logic control PLC S7/400, connected load: 160kVA, permissible voltage variation: +8%/-5%, control cabinet socket: 220VAC, control cabinet lighting: 220VAC, PLC I/O card inputs and outputs: 24VDC, solenoid valve outputs: 24VDC, supply air pressure: 5bar, air consumption: 700Nl/min, noise level: 80dB(A), wi ...

Hermle C800U X: 800 - Y: 600 - Z:500 mm CNC X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Table dimensions: 800 x 700 mm Admission in spindle (ISO): SK40 Power on the spindle: 23 kW Control : Heidenhain iTNC 530 Number of axes: 5 axis Toolchanger: yes Number of toolholders: 30 tools Number of rotations: 10 0000 rpm Power principal motor : 31 kVa Weight: 9 ton

Hermle C30U X: 650 - Y: 600 - Z: 500 mm CNC X-axis: 650 mm Y-axis: 600 mm Z-axis: 500 mm Table dimensions: Ø 630 mm Admission in spindle (ISO): SK40 Power on the spindle: 26 kW Control : Heidenhain iTNC 530 Number of axes: 5 axis Toolchanger: yes Number of rotations: 18 000 rpm Length: 3500 mm Depth: 2480 mm Height: 2950 mm Weight: 9,5 ton ACCESSORIES: yes

Deckel-Maho DMU50 X: 500 - Y: 400 - Z: 400 mm CNC Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 400 mm Power on spindle: 13 kW Admission in boring head (ISO): BT 40 Spindlespeeds: 20 > 9000 rpm Table size: 700 x 500 mm Control: Heidenhain TNC 426 Length: 2700 mm Depth : 2700 mm Height: 2500 mm Weight: 3,5 ton Toolholder: yes Number of tools: 16 positions

Slitting and cut-to-length line Strip width... 1,500 mm Strip thickness 0.5 - 2.0 mm Cutting number... 7 strips Straightening rollers 8 pcs. Coil weight.. 7,000 kg Rewinder .. 7,000 kg

Longitudinal cut-to-length line Strip width 1,500 mm Band thickness. 0.5 - 3.0 mm Number of cuts . 5 pcs. Straightening rollers. 7 pcs. Coil weight.. 7,000 kg Rewinder ... 7,000 kg Facility consists of: -Pressing arm -Unwinder -Belt removal wedge - Straightening machine -Strip scissors -Cross shears -Band brake -Reel -Control panel -Electrical control

Manufacturer: LWB Construction year: 2024 Model: VCRS 500/115 bc Type of machine: Injection moulding machine Technical Details: - Clamping force: 500 kN - Injection volume: 115 cm3 - Machine weight: 3600 kg - Compressed air: 6 bar - Voltage: 400 V / 50 Hz - Electrical power: 46 kW - Operating hours: approximately 6,800 - Extras: Hot runner with two separate heating areas, additional safety walls, automation with plate moving in and out for easier access - Mould not included Find more here - .ucymachines/ Contact us at - sales@ucymachines

Slitting line Stainless Steel Strip width.. 500 mm Belt thickness... .02-3.0 mm Coil weight. 5 to. Speed 150 m/min. Minimum belt width.. 13 mm Strip number 10 Coil I Dia. 400 / 500 mm Shaft diameter.. 145 mm Control... Siemens S 5 Facility consists of: -Coil car -Uncoiler + Snubber roll - Pieler table -Paper Wrapper -Edge controll system -Pinch roll -Scrap shear - PVC coating unit -Side guide 2+2 rolls -Slitting head -Roll table -Scrap winder -Tension unit -Recoiler, separator shaft -Paper wrapper -Turnstile 2 arms -Electrical & Automation system -Camera system

Manufacturer: HYUNDAI KIA Model: VX 500 Year: 2007 Condition: Used Stock number: 9495 Control System: FANUC Series 21i-MB Work table length: 1200 mm Work table width: 500 mm Spindle drive power: 11 kW Maximum vertical spindle speed: 8000 1/min X-axis travel: 1090 mm Y-axis travel: 510 mm Z-axis travel: 635 mm Machine weight: 7000 kg

High voltage induction motor, not used, Power 800 kW, Voltage 690 V, Current 840 A, Rotational speed 1385 rpm, Weight 7340 kg, Protection class IP 55, Cooling IC 416

Manufacturer: Trumpf Model: TruMatic 5000 R Year: 2002 Condition: Used Stock number: 9502 Compressive force: 22 t Maximum length of sheet metal plate: 2500 mm Maximum blade width: 1250 mm Maximum sheet metal plate weight: 200 kg Machine weight: 17500 kg Equipment: Tools Refurbished tool grinder

3 digital axes Axis: X Longitudinal: 510 mm - Transverse Y: 510 mm - Vertical Z: 510 mm Worktop surface dimension: 650 x 510 mm Load capacity: 350 kg Spindle Speed Range: Acramatic 850 SX - 60 -8000 tmm Storage capacity: 21 tools Automatic tool change time 7.5s Maximum weight of tool and tool holder: 6.8 kg Fast travel speed Xet Y axes: 20000 mm/min Z-axis fast travel speed: 18000 mm/min

JUNKER JUPITER 500 – CNC Cylindrical Grinding Machine Plunge-Cut Method Technical Data: Workpiece diameter: 2–220 mm Workpiece length: max. 500 mm Corundum grinding wheel: 610 × 500 × 305 mm CBN grinding wheel: 500 × 500 × 305 mm Spindle drive: 37 kW Regulating wheel: 350 × 500 × 203 mm Regulating wheel speed: 1–800 rpm Regulating wheel drive: 11.5 kW Power: 81 kVA

Used machine NLX2000SY with loading magazine Machine Type: Turning Center Model No.:NLX2000SY Manufacturer: DMGMORI Control: CELOS Year of construction/IB: 2021/2022 Location:: Germany - Main spindle 15/11 KW - Chuck for main spindle - Automatic path control of the clamping cylinder for the main spindle. - Sub-spindle 11/7.5kw - Chuck for sub-spindle - Automatic path control of the clamping cylinder for the sub-spindle - Double footswitch for HSp and GSp - Coolant shower on lining - Spindle 2 tailstock specification - 20 Station turret - Milling drive for all stations 10,000 min-1 - Direct position measuring system X-Y-Z axis - Y-axis - Chip conveyors - Coolant pump 8bar - Bar feeder IF - Parts catcher conveyor belt for parts - Irco Bar Loading Magazine MUK 7012 III - Workpiece ejector (headstock 2) - Oil separator - Alternating speed - Spindle orientation ...

turning diameter over bed: 1250 mm turning diameter over slide rest: 940 mm turning length: 5000 mm spindle speed:: 1.6 - 315 U/min spindle motor: 75 kW spindle bore: 105 mm tailstock quill diameter: 280 mm quill stroke: 200 mm workpiece weight: 30 t workpiece weight max.: 40 t feed: 0,18 - 160 mm/U thread - mm pitch: 1 - 192 mm thread - inch: 30 - 1/8 inch. total power requirement: - kW weight of the machine ca.: 38 t dimensions of the machine ca.: 10,7 x 2,2 x 1,9 m Fitted with: - DRO - Chuck, 1250 mm diameter - Tailstock - 2 centres - Removable grinding unit - Milling unit with ISO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chipper shredder KLOCKNER 120×500 K-2WV Inlet width 520mm Inlet height 180mm Shaft width 520mm Shaft diameter 400mm Number of knives 2pcs Sieve dimensions 100x100mm Pulling shaft gear from bottom shaft motor 2.2kw Top Gear Pulling Shaft Motor 2.2kw Feeder length 4400mm Feed belt width 500mm Feeder motor power 1.4kW Main Cylinder 55kW Net price

Turning diameter over face slide: 200 mm Spindle bore: 32 mm Circumferential diameter over bed slide: 315 mm Tip width: 600 mm Turning length: 560 mm Quill stroke: 140 mm Total weight: 1,750 kg Digital display Heidenhain Collet System E163

Reinders RVR 500-800: Reinders RVR 500-801 Manufacturer: Reinders Type: RVR 500-800 M-Nr.: 02005 Year: 2002 Specifications: Motor: 15 KW, 3.000 rpm – indirect driven fan Suction diameter: ø500 mm Out: ø350 mm Capacity: 8,700 m3/hour Pressure: 2.800kPa

Mobile Knife Folding Unit GUK ZG 500 Schwertfalzwerk / Mobile Knife Folding Unit GUK ZG 500 Baujahr / Year 1999 - Serial-No. 40094 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 40m/min - max. 160m/min Produktivität / Productivity 20.000 cycles/h Messerfalzwerk ist getestet und  in einem guten Zustand, getestet. Mit Eigensteuerung Elektronische Steuerung. Zum Anbau an Falzmaschinen von GUK, Heidelberg - Stahl oder MBO, sowie an Fremdmaschinen wie Sammelhefter, Zusammentragmaschinen usw. The knife folding unit has been tested and is in good working order. It has its own electronic control system. For mounting on folding machines from GUK, Heidelberg-Stahl, or MBO, as well as on third-party machines such as saddle stitchers, collators ...

Booklet Maker Duplo System 5000 Broschürenfertigung / Booklet Maker Duplo System 5000 Baujahr / Year 2008 - Serial-No. 080100007 Zähler / Counter 7,6 Falzungen-Heftungen Anlage besteht aus / Booklet Maker consist of: Zusammentragmaschine / Air Suction Collator DC-10/60 - 2 x 10 Stations Feeder Format / Size min.120mm x 148mm - max. 350mm x 500mm Grammatur / Paper weight 40-300g/qm Stapelhöhe / Infeed height Station 60mm Geschwindigkeit / Speed max. 5.000 Product/h Broschürenfertigung / Booklet Maker DBM 500 Heften-Falzen / Stitching-Folding Format / Size min. 120x170mm; max. 350x500mm 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Presswerk / Pressing Station DBM 500-P Frontschneider / Trimmer DBM 500T Auslageband / Delivery band DBM -LS Brücke Lifing unit LUL -HM Inklusive Kompressor / Include Compressor Rietschle

Tischmodell Blockleimpresse mit Warmluftgebläse / Table Model Block Gluing Press Müro with hot air blower  Blockleimpresse / Block Gluing Press - Müro BLP 5000 Year 2003 - Serial-No. 20/2003 Arbeitsbreite / Working width 350mm Stapelhöhe / Stack height max. 220mm mit Warmluftgebläse / with hot air blower 

1 Zangen Klebebinder / 1 Clamp Perfect Binder 1 Zangen Klebebinder / 1 Clamp Perfect Binder Gantenbein Bufalo 500 Buchdicke min. 0,5mm / book thickness min. 0,5mm Einzelbuchfertigung max. 57cm / single book production max. 57cm Rückenbeleimung / back gluing unit Seitenbeleimung / Side gluing unit mit Umschlaganleger / with Cover Feeder Presstation / pressing station Fräs- und Aufraustation / milling and roughening station Geschwindigkeit / Speed 500/per hour mit Absaugung / with Extraction System Auslage / Delivery

Zweiwalzen Anleimmaschine für Kaltleim als Tischgerät, dieses Gerät trägt Klebstoff auf der Rückseite eines zu beleimenden Materials auf Two roller Gluing machine for Cold glue as table-top machine, this device will carry adhesive on the back of a material to be glued Anleimmaschine  / Gluing Machine Prakma AM 500 Zweiwalzen-Anleimmaschine  / Two-roller Gluing Machine  Serial-No. 165347 Arbeitsbreite / Working width 500mm für Kaltleim / for cold glue

Zweiwalzen Anleimmaschine für Kaltleim als Tischgerät, dieses Gerät trägt Klebstoff auf der Rückseite eines zu beleimenden Materials auf Two roller Gluing machine for Cold glue as table-top machine, this device will carry adhesive on the back of a material to be glued Anleimmaschine  / Gluing Machine Tränklein AM500 Zweiwalzen-Anleimmaschine  / Two-roller Gluing Machine  Serial-No. 20185 Arbeitsbreite / Working width 500mm Arbeitsgeschwindigkeit / Working speed 4 - 20 m/min für Kaltleim / for cold glue

Inoxmim 500L High shear mixing vessel 2020, Stainless mixing vessel, top mounted agitation with scrape surface, bottom mounted high shear mixer 7.5Kw, jacketed both steam and water, with digital temperature display and a Thermosiphon vessel, mobile, with PDF manuals, 3Ph

This 5-axis POSmill H 500 U was manufactured in 2020. It features a Heidenhain TNC 640 control system and includes additional equipment such as a chip conveyor and an external cooling unit. With a nominal power of 60 kVA and extensive operational hours, this machine is well-equipped for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the POSmill H 500 U vertical machining centre we have for sale. Contact us for further details.

For sale is a robust Conkest Mobile 500 machine. We have collected this machine, however, it has sustained fire damage. Our plan is to carry out a comprehensive package of work to restore its mobility and replace many of its worn and damaged parts. Key Advantages and Features: Radio Remote Control: The unit can be fully operated via a radio remote control, providing exceptional flexibility, convenience, and safety for the operator. Thanks to remote operation, machine movement and workflow management can be carried out precisely from an optimal viewpoint and a safe distance within the work area. Important Note Regarding Photos: Please note that the attached photographs show the machine in its previous, pristine condition and do not reflect its current fire-damaged state. This machine provides an excellent foundation for a complete restoration, after which it can be return ...

Technical data of the pallet rack stand: Shelving system: Jungheinrich Type: MPB The scope of delivery includes: 01x Pallet rack stand, used Material colour frame profile: hot-dip galvanised Material colour truss: sendzimir galvanised Stand Type: STD ́B ́28 Profile dimensions: 120 x 65.5 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 6,500 mm Depth: 1,100 mm Note: Steel grade S420MC better in Comparison to S355MC Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Offer 26234 Technical data: - Sheet metal and flat steel shears, knife length 200 mm cuts flat steel up to 150 x 15 mm - or up to 190 x 10 mm - Profile steel bar shears cuts - angle steel up to 100 x 10 mm - Round steel up to 32 mm - Square steel up to 30 mm - Notching device with triangular notch notch - Hole punch - punching force 500 KN - Stroke 10 to 28 mm - Projection 155 mm - Holes in steel up to 27 mm Ø in 14 mm - or up to 31 mm Ø in 10 mm - Drive 400 V / 4 kW - with: - Footswitch - E. contact stop - Various punches with dies - Space requirement approx. W 650 x H 1750 x D 960 mm - Weight approx. 850 kg

AGICOM Recycling Machines Very powerful and high-quality alligator shears with a cutting force of up to 90 tons. The scissor head is operated with a foot pedal for individual cuts or continuous cutting and is protected by a safety cage. Cutting force: 90 tons Knife length: 508 mm Max. knife opening: approx. 250 mm Drive: 7.5 kW/380 V Overall dimensions: 1370 x 720 x 1280 mm Total weight: approx. 1020 kg Drive: 7.5 kw / 380 V Number of strokes at full opening: 16 / min Operation: Foot pedal; Machine on wheels Operating instructions in German CE Declaration of Conformity Spare parts available

Incl. compressed air receiver, maximum volume flow: 850 l