mtu ba 500 used for sale

Flash Labeller – Marel Concept 500, Manufacturer: Marel Ltd., Machine: Flash Labeller, Model: Concept 500, Year of manufacture: 2019, Serial number: 10422443, Description, The Marel Flash Labeller Concept 500 is an automatic labeling system designed for high-speed labeling in food processing and packaging lines. The machine applies labels quickly and accurately to products or packaging, ensuring reliable identification and traceability in production environments., Marel equipment is widely used in the meat, poultry, fish, and food processing industries due to its hygienic design and reliable performance., Technical Specifications, - Manufacturer: Marel Ltd., - Model: Concept 500, - Machine type: Automatic labeling machine, - Year: 2019, - Serial number: 10422443, - Voltage: 230 V ±10%, - Frequency: 50 / 60 Hz, - Current: 4 A, - Short circuit rating: 5 kA, - Protection rating: IP54, -  ...

Continuous tunnel cooler with short heat-holding section, make Steiner, type TP 900/5000, year of manufacture 2012, for the continuous pasteurization/cooling of hot-filled products, such as jam, marmalade, dips, seasoning sauces or spreads in jars,, Usable belt width: 900 mm,, Usable tape length: approx. 5,000 mm,, Adjustable throughput times: 11.26 - 49 minutes,, Nominal throughput time: 29 minutes,, 4 circulation pumps (1.1 kW),, Holding zone (5min), 3 cooling zones (each 8 minutes),, Max. container throughput height: 220 mm,, energy consumption at cont. Operation: approx. 70 kg steam / h,

This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet, capable of handling a maximum load of 500 kg, and offers a comprehensive range of movements with 760 mm travel in X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 min⁻¹ and a 64-tool magazine, this horizontal machining centre is ideal for complex machining tasks. Contact us for more information about this machine.

x-travel: 500 mm y-travel: 350 mm z-travel: 375 mm digital readout: AKTIV - Digitalanzeige turning speed range: 63 - 4000 U/min spindle taper ISO: 40 table surface area: 800 360 mm total power requirement: 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2 2 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Marel labeling machine, - Concept 500, - Top labeller

This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details.

degree: 500 working heigth: - mm length: 600 mm width: 600 mm depth: 600 mm total power requirement: 21 A / 14,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 500 kg throat: 5.000 mm base plate: 0,7 x 0,7 m dimensions of the machine ca.: 5,14 x 0,70 x 4,75 m Crane DEMAG - DC-COM 1/1 H5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5000 , 2050 , 80

Presse à injecter SANDRETTO 500 T Serie 7 Type : 3270/500 Force de fermeture : 500 T Diamètre vis : 80 mm Volume théorique d'injection: 2110 cm3 Poids de l’injection en PS : 2050 gr Longueur utile de la vis L/D : 20 Capacité de plastification : 290 kg/h Zone de chauffe : 4 Puissance total de chauffage : 31 KW Epaisseur moule min/max : 250-800 mm Course plateau mobile : 830 mm Passage entre les colonnes : 720 x 720 mm Capacité réservoir d’huile : 500 L Dimensions : 9,0 x 1,80 x 2,50 m Poids total : 25 000 KG

Complete line for washing/sterilising/filling/sealing/labelling/stretch-banding open funnel/stem cut ampoules made of glas, consisting of: • Bosch RRU 3063 washing machine • Bosch HQL 2220 sterilising/pyrogenising tunnel • Filling/capping machine Bosch ALF 4060 • Labelling machine Bosch ERS 2010 (500) • Folding box cartoning machine Bosch CUK 1060 for 12 ampoules/carton • Skinetta ASK 450-bU banding machine • Output max. 18,000 ampoules/h depending on size: - 1 ml, 18,000 ampoules/h - 2 ml, 18,000 ampoules/h - 3 ml, 16,800 ampoules/h - 5 ml, 13,500 ampoules/h - 10 ml, 9,900 ampoules/h - 20 ml, 6,000 ampoules/h • Capacity for ERS 2010 max. 30,000 ampoules/h • With format parts for 1 ml ampoule Ø 10.75 x H 65.0 mm (unfilled, open), H 45.0 mm (filled, closed) • Menu languages English, Mandarin • PLC Siemens S7-300 • Danfoss VLT 2800 servo inverter • CE decla ...

Strip light scanner consisting of: 1 pc. control unit Art.-No. VL-500 1 pc. 500-mm base Item no. VL-550 1 pc. measuring head Art.-No. VL-570 1 pc. Accessories including calibration plate, user manuals item no. VL-A2D 1 pc. Cover Art.-Nr. VL-C2 1 Pc. Win10 PC for VL-500 Series Item No. 972337 1 pc. LCD monitor for VL 23-inch Art.-Nr. Reference 972072L 1 pc. Comparative measurement module Art.-No. VL-H2P 1 pc. Shape and Position Tolerance Module Art. No. VL-H2G 4 pcs. AC cable Art.-Nr. OP-99031

Key data: 5005 mm, 3586 mm, 1106 mm

year of production: 2007 automatic tool change Work spaces [mm]: 5000x2500 Groove distance [mm]: 200 Travel ranges [mm]: 5005x3586x1106 Work feed [m/min]: 35m/min Rapid feed [m/min]: 40 Spindle speed [rpm]: 35 - 6000 Spindle torque [kW]: 37kW Max. torque [Nm/rpm]: 670/525 Tool clamping: HSK-A 100 Tool magazine [pcs.]: 100ks Machine control system: iTNC 530 2x univerzální úhlová hlava 45° Direct outlet head Power supply

Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt

Transnorm conveyor belt GF 1740-600-500 RA2478 Technical data: Conveyor length (NL): 1740 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.53 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 1740 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 0,53 scope of delivery: without supports and side guides Für eine ...

turning diameter: 356 mm turning length: 510 mm control: M 730 BM total power requirement: 40 kVA weight of the machine ca.: 6,6 t dimensions of the machine ca.: m CNC control: Mitsubishi 730 BM Main spindle: Speed: 5000 rpm Power: 15/11 kW (15% duty cycle / constant) Bar diameter: 65 mm Sub spindle: Speed: 6000 rpm Power: 11/7.5 kW (25% duty cycle / constant) Turret: 12 stations Tool spindle speed: 10000 rpm Power: 5.5/3.7 kW (5 minutes / constant) Y-axis travel: +/- 50 mm Equipment: Machine with gantry loader: Left-hand installation, 14-station storage, 20-pallet workpiece storage, Double gripper conveyor 3-jaw hydraulic KITAGAWA power chuck, 210 mm diameter High/low pressure chuck system for main and counter spindles MABEO high-pressure pump with 1.5 MPa filter unit Coolant gun Coolant sprayer on the chuck for main and counter spindles Coolant sprayer for the machine bed cladding Oil  ...

Sandretto Serie 9 type 4170/500 - 500 T Year : December 2002 Clamping Force : 500 T Screw Diameter : 80mm Injection Volume : 2056 cm3 Injection Pressure : 2027 bar Platen Sizes : 1300 x 1300 mm Distance Between tie bars : 900 x 900 mm Tie Bar Diameter : 150mm Min/max mold high : 300 / 1000 mm Moving Platen Stroke : 950mm Ejector Stroke : 380mm Oil Filling : 900 Litres Dimensions : 8520x2660x2165 mm Weight : 21,000Kg

Number of boring spindles: 7 St. Working width: 260 mm Working height: 160 mm Length of the planing table: 2.500 mm Feed motor: 4 kW Feed speed: 30 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second hand aluminium extrusion press line Mfc.: Taiyuan Force: 5000 MT Type: Front loading – single action Built: 2007 Stopped in 2016 Product weight: max. 55 kg/m Billet dia.: 279 & 406 mm (11” & 16”) Length: 600 - 1200 mm Consist of: Cold billet saw Gas heated billet furnace Extrusion press Run-out table Platen saw Quenching device Single puller Stretcher Finishing saw Dies heater

spindle passage: 80 mm max. turning diameter: 460 mm Max. Turning length: 1.000 mm control: System TX 8F max. Spindle speed: 2.800 U/min. CNC lathe | TRAUB - TNA 500 The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COMAFER grinder model MAC 500: – hourly production from 100 to 200 kg/h – 10 HP, 380 volt motor – 965x500 mm inlet – overall dimensions 1.7 m x 1 x h=1.5 m – weight 800 kg – year 1997, in accordance with CE standards

Overview This tray packer was manufactured in 2012 by the german manufacturer MEYPACK. It is already dismantled and stored in the BEVMAQ warehouses. The conveyor system is not included, the inlet and tray magazine are included. Technical data  type: VP500 year of manufacture: 2012 Total output: 20 cycles/min length 8000 mm | width 1600 mm | infeed and outfeed height: 1250 mm packaging data:  length: 100-300 mm width: 200-450 mm height: 60-350 mm height of tray edging: 40-100 mm pre-cut: length: 200-500 mm width: 290-600 mm power: 400V,N,PE | 10kW/33A |  air: 6-7 bar | 20 NL/cycle

Packaging capacity single jaw/double jaw: 100/200/h, sealing jaw spacing: 150mm, sealing jaw width: 250mm, product length range: 50mm-500mm, product width range: 20mm-230mm, max. product height: 120mm, max. cut-off: 650mm, max. film width: 650mm, max. roll diameter: 350mm, roll core diameter: 76mm, max. roll weight: 40kg, machine weight: approx. 850kg. Documentation available. An on-site inspection is possible.

Work table AT 500 drawer cabinet Work table Gastro bakery table Stainless steel version with 3 drawers Approx. dimensions: 500 x 600 x 850 mm, WxDxH Used device as good as new

The machine is in good technical condition, after prior agreement it is possible to test it. Spindle completely overhauled summer 2023 Ball screw replaced in Z axis in 2020. Feeds: X axis 850 mm Y axis 700 mm Z axis 750 mm Working feed 1-24000 Positioning accuracy +/- 0.005 Rapid feed – 48m/min all axes. Distance spindle face – front of table 150-900 mm Distance spindle axis – pallet surface 50-750 mm Pallet – 500 x 500 Spindle alfaP22/8000 Motor power (continuous/15') – 11/15/18.5 Spindle speed – 8000 rpm Base speed – 8000 rpm Tool clamping force – 1000 N Max. torque (15') 29.2 Nm Orientation built-in sensor Taper ISO 40, taper 7/24 Power transmission – synchronizing belt and pulley Cooling through the spindle – 70 kg/cm2, max flow 20 L/min, pump power 3.7 KW Magazine for 60 tools – chain – be careful, the catalogue incorrectly states 40.

Sourdough plant Isernhäger B 500 Eco Manufacturer : Isernhäger Type : B 500 ECO Year of construction : 2008 Weight : 395 Sourdough stirring kettle Sourdough container IsernHäger the baking culture completely in stainless steel Kettle capacity 500 liters mobile on rolls Details see pictures.

6 axis Type of controll tasc 6000 Power (ton) 320 Length ( mm) 4420 Depth groove ( mm) 420 Passage between the couloumn (mm) 3680

Injection moulding machine Arburg 270s 500-60 and Boy 12 M 1998

Used paddle mixer with a capacity of 500 liters. Manufacturer IBL. Acid-resistant design.

A Rausch robot-based deburring machine is available. Support height: 1050mm, spindle speed: 50000rpm, power: 1kW, max. burr thickness: 0.2mm, max. workpiece diameter: 500mm, gear types: straight/helical/angled, max. helix angle: 40°, max. chamfer angle: 45°, max. workpiece length over chuck: 450mm, max. workpiece weight: 50kg. Machine dimensions X/Y/Z: approx. 2050mm/1200mm/2100mm, weight: approx. 1300kg, operating hours: 1271h, utilization time: approx. 8h. Documentation available. An on-site inspection is possible.

A container mixer, probably Engelsmann, is available. Container dimensions X/Y/Z: 1200mm/1200mm/900mm, volume: approx. 500l, machine dimensions X/Y/Z: approx. 2750mm/2000mm/2200mm. An on-site inspection is possible. The manufacturer statement is a well-founded assumption.

Scissors

Used hammer mill from Alpine type B 500.

table diameter: 790 mm table load: 500 Kg swivelling range: 0 - 135 Grad turning speeds: max. 2,0 U/min connected load frequency: 400 V weight: 0,95 t Dimensions (LxWxH): 1,4 x 0,8 x 1,5 m Welding turntable incl. - Control column with foot switch - 630mm chuck - Chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used 5000 liter double-ribbon mixer from American Food Equipment Company. Internal dimensions: length 2500mm x width 2000mm x depth 1000mm. Supporting structure. Acid-resistant design.

diameter: 500 mm thickness of jaw: . mm hollow: 145 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate: clamping plate 500 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 18 mm -Groove spacing: 280 mm -Dimensions: see drawing in the photos -Dimensions total: 500/500/H75 mm -Weight: 128 kg

Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine, pneumatic hole punch -Manufacturer: All Mecanic, multifunctional punch -Type: 994.500-1 - Execution: pneumatically operated, with foot control -Punching tool: see photos -Dimensions: 400/270 / H370 mm -Weight: 28 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H190 mm -Weight: 87 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H335 mm -Weight: 123 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H320 mm -Weight: 121 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H310 mm -Weight: 86 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate comes from: a Hüller Hille milling machine type nb-h 70 -Width: 475 mm -Length: 500 mm -Height: 68 mm -Plate: is solid -Groove width: 12 mm -Dimensions: 500/475/H68 mm -Weight: 90 kg

PTC relays, contactors, semiconductor contactors, relays, fiber optic converters -Manufacturer: Phoenix Contact, DIN rail power supply -Type: QUINT-PS 3x400-500AC/24DC/5 -Order No.: 2938594 -Number: 3x power supply units available -Price: per piece -Dimensions: 130/70/130 mm -Weight: 1 kg

Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, dryer, infrared dryer, powder coating -Infrared dryer: used for powder coating slats/blinds production -Manufacturer: Himmel, type HA 5-2-9/500 -Geared motor: WEG 0.37 kW -Dimensions: 880/1050/H2200 mm -Weight: 308 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H315 mm -Weight: 111 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo type DNU-63-500-PPV-A -Piston diameter: 63 mm -Stroke: 500 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Price: per piece -Number: 2 pieces -Dimensions: 690/80/H80 mm -Weight: 4.5 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Type No .: 6.618962.4 -Display range: 0 V - 500 V -Installation dimensions: LxWxD approx. 66x138x165 mm -Dimensions: 72/144/H165 mm -Weight: 1.3 kg

double grinder, double grinder, column grinder, column grinder, drill grinder -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW -Operating voltage: 380 volts -Quantity: 2 pieces available -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-50-500-PPV -Piston: Ø 50 mm -Stroke: 500 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 70/70/H585 mm -Weight: 4.65 kg

rotary actuator, actuator, actuators, geared motor, electric motor, electric geared motor -Actuator for: gate valves, locks, ... -Speed: 160 rpm -Power: 8.5 kW -Design: hollow shaft -Hollow shaft diameter: 30 mm -Protection class: EX -Number: 2x drives available -Price: per piece -Dimensions: 850/750/H560 mm -Weight: 86 kg