mtu 2000 used for sale

Very high-quality CNC – controlled precision sheet metal round bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive  ...

Inv. Num. : 5457 Type: UB 63/2000 Producer: HOL-MONTA Created: 2001 Parameters: Control system: Kavalír Maximum grinding length: 2000 mm Grinding diameter: 630 mm Tip stroke: 375 mm Total power requirement: 41 kW

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

Workbench, work table, assembly bench -Width: 2000mm -Depth: 700mm -Height: 850mm -Drawers: 3 -Storage: 1 -Number of workbenches: 3 available -Price per piece -Weight: 116kg/pcs

Permanent magnet motor, electric motor, servo motor, spindle motor, permanent magnet three-phase servo motor, permanent magnet DC servo motor, DC spindle motor Manufacturer: Fanuc, DC Spindle Motor -Type: 3-S TG 6 -Shaft: Ø 42 x 110 mm -Dimensions: 830/220/H288 mm -Weight: 70 kg

Banding system ATS US 2000 AB Cornerline; good condition; serviced and tested by ATS customer service; bandwidth 30mm; frame size 360x160mm; Min. Product width 80mm, max.165mm; Max. Product length 270mm; Max. Produnkt height 110mm; Compressed air required. Ultra sonic banding machine ATS US 2000 AB Cornerline; good condition; cleaned and checked by the support of ATS Germany; band width 30mm; frame size 360x160mm; min. product width 80mm, max.165mm; max.product lenght 270mm; product hight 110mm; pressure air needed.

Workbench, work table, assembly bench -Width: 2000 mm -Depth: 950 mm -Height: 875 mm -Number: 1x drawers -with storage space for a tool trolley -Weight: 108 kg

Number of sanding units: 2 St. sanding width: 190 mm Sanding height max.: 2-180 mm LÖWER-Doppelseitige Schleifmaschine DSM 2000 Doppelseitige Einzelholzschleifmaschine zum Schleifen von Massivholz wie z.B. Fensterhölzern etc. Stabile Top-Aus- führung mit langen Gußtischen, Bürst- und Finisheinrichtung und Transportbandvorschub. Geeignet für hohe Dauerbelastung auch bei höheren Spanabnahmen. - versetzt angeordnete Schleif- und Finishaggregate oben und unten - direkt angetriebene gummierte Schleifrollen für schlupffreie Kraftübertragung - Kombischliff über Rolle und Schuh für hohe Spanabnahmen bei gleichzeitig ebener Eingriffszone - wartungs- und verschleißfreie CERMET-beschichtete Schleifschuhe mit sehr guter Wärmeleitfähigkeit und absoluter Maßhaltigkeit - Fremdkühlung der Schleifzonen für einen kühleren Schliff und höhere Schleifbandstandzeiten - zwangsgeführte pneu ...

Stop, depth stop, length stop for miter saw, pull saw... -Receiver: Bosch profile -Length Unit of measurement: 2000 mm -Price: complete -Dimensions: 2215/100/H1000 mm -Weight: 10 kg

Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 2005 mm -Length: 2000 mm -Height: 210 mm -Plate thickness: 120 mm -Plate: with support ribs -Groove width: 28 mm -Dimensions: 2000/2005/H210 mm -Weight: 2700 kg

table length: 2000 mm table width: 1000 mm table height: 850 - 900 mm weight of the machine ca.: 0,45 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 mm Working width: 360 mm Wheel width: 360 mm roll diameter: 60 mm : 800 kg height adjustment: 650 - 950 mm weight of the machine ca.: 0,045 t dimensions: 2,07 x 0,48 x 0,21 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 33 m/sec total power requirement: 4 kW weight of the machine ca.: 100 t dimensions of the machine ca.: 1,2 x 0,5 x 0,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mm band length: 2000 mm band speed: 37 m/sec total power requirement: 3 kW weight of the machine ca.: 0,105 t dimensions of the machine ca.: 1,2 x 0,5 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.

pressure: 2000 /1000 t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a di ...

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...

USED LÖDIGE FKM 2000D STAINLESS STEEL 2.000 LITRES BLENDER REF#: C5725 Lodige FKM2000D mixer with a total volume of 2000 liters manufactured in 316 stainless steel. Two inspection doors with a 55 kw geared motor completely reconditioned. General characteristics: Manufactured by LODIGE Model FKM 2000D Material Stainless steel 316 Year built 1973 Weight 3700 kg (2060 kg + 1640 kg motor and reducer) Technical characteristics: Capacity 2,000 L (800-1,400 L useful) Motor characteristics: Manufactured by SCHORCH Voltage 400/690 V Current 94/55 A Power 55 kW Frequency 50 Hz cos(fi) 0.89 Rotational speed 2960 rpm Reducer characteristics: Manufactured by ELENDER Model SZBW 250 Ratio 0.04 Rotational speed 120 rpm

We can offer a Krauss Maffei injection moulding machine, manufactured in 2017, short time working, like new one, serious buyer contact us. We have many brands, models,years machines, tell me what you need seriously!

Both filling stations are in good condition, little in use.

Pausch recording workstation Compact CS 2000 with the following device components: Generator Editor Hfe 501 Tube RAD 21 0.6/1.2 Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally railed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be completed by a specialist authorised by the manufacturer or technicians!

GEA type 200023512 Intercooler Ladeluftkühler MTU Einwandfreier Zustand perfect condition from an MTU4000 engine that has been running for 25,000 hours von einem MTU4000-Motor, der seit 25000h in Betrieb ist

roller conveyor, conveyor track, roller conveyor belt, roller track -Roll width: 2000 mm -Conveyor length: 5000 mm -Roller drive: via conveyor chain

Threaded rod, threaded bolt, threaded rods according to DIN 975 -Diameter: M24 -Threaded rod: galvanized -Quality: 4.8 -185 pieces, length: 2000 mm, price per piece: 15 EUR net -19 pieces, length: 3000 mm, price per piece: 20 EUR net

Vernier caliper, caliper, vernier caliper -Manufacturer: Massi, Vernier caliper with fine adjustment according to TGL 9252 -Measuring range: 0-2000 mm -Dimensions: 2260/302/H17 mm -Weight: 7.4 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: Bürkert, pneumatically operated 2/2-way angle seat valve -Type: 2000A 40.0 PTFE VA -Connection: DN40 PN16 -Dimension: 220/100/H240 mm -Weight: 2.9 kg

Arburg 520C-2000-675 (154) without funnel General information Item number: 154 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 240 g Clamping force: 2,000 kN Screw diameter: 45 mm Spray pressure: 2500 bar Spar spacing: 520 x 520 mm Clamping plate size: 715 x 715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 126766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Euromap: Yes Air valve: Yes

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering -Manufacturer: Logitrans, drawbar completely from pedestrian stacker SGL 2000V -Number: 1x drawbar available -Price per piece -Dimensions: 930/345/H110 mm -Weight: 12 kg/pc.

pressure: 200 t distance between columns: 1600 mm max. ram stroke: 600 mm dayligth: 900 mm table width: 1600 mm table depth: 1300 mm table height: 1060 mm ram surface: 1600 x 1300 mm T-slots: Din 650 / 22H12 rapid traverse: 400 mm/s return speed: 325 mm/s pressing speed: 42 mm/s bei 40% mm/sec pressing speed: 20 mm/s bei 100% mm/sec die-cushion pressure: 800 kN die cushion stroke: 150 mm speed of die cushion: auf 68/ ab 225 mm/s The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workbench, work table, assembly bench, assembly table, work table -Workbench: solid version, with drawer and vice -Workbench: 2000/720/ H940 mm -Vise: 460/160/H175 mm -Clamping jaws: 150 x 25 mm, clamping width: 195 mm -Total weight: 122 kg

Workbench, work table, assembly bench, assembly table, work table -Workbench: solid design, height adjustable -Width: 2000mm -Depth: 1000mm -Height: 880 mm, adjustable see photos -Table top: wood, thickness 25 mm -Weight: 64 kg

working width: 2000 mm for sheets up to: 3 mm Clear stand width: 2050 mm Stand discharge: 250 mm Support table size: 220 x 2200 mm electr. Drive: 380 V, approx. 5 kW Weight: 2.7 t

Workbench, work table, assembly bench, assembly table, work table -Workbench: solid design, height adjustable -Width: 2000mm -Depth: 1000mm -Height: 880 mm, adjustable see photos -Table top: wood, thickness 25 mm -Quantity: 7 pieces -Price per piece -Weight: 66 kg

An indestructible machine for the toughest conditions. The machine is suitable for processing raw wood. The machine has no inclination. The saw blade is located directly on the motor. Technical parameters: Maximum saw blade diameter: ø 500/mm Power of the main motor: 5.5 kW Main speed of the saw blade: 2850 rpm Maximum cutting height: 85 mm (with 350 mm saw blade) Inclination of the saw unit: NO Dimensions of the iron table: 1050 × 600 mm Aluminium formatting table: 2000 × 360 mm / OPTION 3200 x 360 mm Formatting table for hardened rods (Altendorf principle) Cutting length: 2000 mm Weight of the machine: 450 kg Given the prices of new Chinese machines that cannot withstand the harsh conditions, this machine is the solution. Made in Slovakia in Europe

Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...

cleaned & checked 220 Volt / 1500 Watt / 50-60 cycles (Hz)

workbench, work table, assembly bench, assembly table, work table -Manufacturer: Krieg, workbench, solid construction, mobile -Width: 2000mm -Depth: 800 mm -Height: 850mm -Table top: thickness 25 mm -Base: 4 swivel castors, 2x with parking brake -Quantity: 20 pieces -Price per piece -Weight: 51 kg

Corrugated pipe, plastic hose, empty pipe -KG Pipe: Bend 15° KG 2000 Polypropylene 4 pieces -Type: KGB DN 110x15° -Nominal diameter: 110 mm / inner diameter 104 mm -Delivery/Price: complete -Dimensions: Ø 130 x 190 mm -Weight: 0.4 kg/piece

Crane block, crane hook, load hook, single hook, bottom block -Crane hook: Crane hook load capacity 2 t -Rope groove: Ø 10 to 14 mm -Dimensions: 450/180/90 mm -Own weight: 8.5 kg

Plasma Cutter VCS 2000, HiPerformance Plasma HPR 260 XD and suction Filtercube 4H 7500 m³/h volume flow. To be visited in operation.

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 2000 mm -Width: 1515 mm -Plate thickness: 130 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 2000/1515/H430 mm -Weight: 3150 kg

Specifications: - working length 3500 mm - Stand passage 3050 mm - max pressing force 2000 kN - Distance table / ram max. 480 mm - Stand projection 260 mm - Ram stroke approx. 300 mm - Lifting speeds - Downspeed idle max. 100 mm/sec - Boost speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg -with: - CNC control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. Tool clamping - Upper tool + universal die tool - Material requirements - Two-hand control panel

I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.

Clamping plate, marking-out, welding table, welding table, straightening plate, marking-out plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1515 mm -Table height: 800 mm -Plate thickness: 130 mm -Transport dimensions: 2000/1515/H800 mm -Weight: 3250 kg

Tow hitch, trailer coupling, jaw coupling -Manufacturer: AL-KO, axle braked -Type: B 2000-4 -Brake: Type 3081 A -Brake drum: Ø 325 mm Recess Ø 160 mm / Bolt circle Ø 205 mm -Dimensions: see photos -Transport dimensions: 1750/660/H340 mm -Weight: 134 kg

Offer 08533 Measurement.- Richt. and welding plate Specifications: - Length approx. 2000 mm - Width approx. 1500 mm - Material thickness of the upper plate approx. 40 mm - Total height of the ribbed plate approx. 180 mm - Total height plate with steel base approx. 850 mm - Weight approx. 1800 kg

You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. Laser welder LWH-2000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual pla ...

-Stainless steel, work table -Design: stable -filing -double-sided table -Dimensions: 2000/1800/H800 mm -Weight: 100 kg

-Stainless steel, work table -Design: stable -filing -double-sided table -Dimensions 2000/1800/H810 mm -Weight: 117 kg

-Stainless steel work table -Design: stable -Base floor: 1 -border -filing -Dimensions: 2000/930/H930 mm -Weight: 82 kg