mtu 16 v used for sale

; Gross weight [kg]: 1926; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Caterpillar DE165GC Generator Set specifically designed for stand-by duty.; Water Tank Volume [l]: 325

- Super Silent 55 dBA @ 7 metres, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 3400; Engine: TCD 5.2 L4; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 500

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove: 100 x 36 mm -Dimensions: 250/160/H280 mm -Weight: 11 kg

Palettenheber / Pile Hoists - Stack Lift Baumann NUP 1600 Baujahr / Year 2005 - Serial-No. 52970 Format / Size max. 1500 x 1185mm Hebekapazität / Loading capacity max. 1600KG Hubhöhe / Lifting height max. 1400mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

weight max.: 2000 t fork length: 1200 mm height of stroke: 1650 mm Number of working hours: 1700 h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Weingarten Mechanics Press 1600 to Nominal press force from 20 mm before UT 16000 kN Endurance stroke rate at idle infinitely variable 10 - 22 strokes/min Setup stroke number 5 - 10 stroke/min Plunger stroke 600 mm Maximum tool installation height 1200 mm Stroke at the bottom, adjustment at the top Minimum tool installation height 900 mm Plunger adjustability 300 mm Standard tool installation height (closed tool if power setup springs are present) 1150 mm Table top dimensions, length x width 3600 mm x 23 Plunger plates dimensions, length x width 3600 mm x 23 Passage between uprights in length 3650 mm Passage between the uprights in the width of 2300 mm Transfer height above press table 750 mm Quick Tension Plunger Plate: Swivel voltage, stationary 4 pcs. on each side Tool clamping flange thickness 70-0.2mm Clamping force  ...

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head corner cutter -Type: Ø 160 mm -Recording: SK50 -Dimensions: Ø 160 x 250 mm -Weight: 11.2 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head -Type: Ø 167 mm -Hole: Ø 50 mm -Dimensions: Ø 167 x 62 mm -Weight: 5.9 kg

Key data: 1120 mm, 345 mm, 550 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 rpm Feed range 16-800 mm/min Travel x 1120 mm ; y 345 mm; z 550 mm Connected load approx. 14.5 kW Accessories: 2 counter bearings Electric clamp horizontal and vertical spindle Vertical milling head SK50 with snap bearing

TIG-TIG Welding Machine Cebora Power TIG 1640 DC HF DC TIG/MMA welding power source. Inverter Welding Machine (MMA) with HF and Lift Arc Ignition 2-step/4-step selection button. Welding current range TIG (DC): 5 A – 160 A Welding current range MMA: 10 A – 140 A Gas inflow time (post-gas) can be controlled. Current reduction (slope-down) can be adjusted. Connection for remote controller / foot pedal or up/down burner. Mains voltage: 230 V Areas of application & details: TIG Welding Machine Cebora Power TIG 1640 DC HF, Constant DC Source with INVERTER Technology, TIG/TIG Welding Machine, TIG Welding Machine, TIG DC Inverter, Shielded Gas Welding Machine, DC-TIG/MMA Welding Power Source, Electrode Manual Welding (MMA), Arc Welding Machine.

Key data: 128 KW, 160 kVA

We currently offer: Number 29 Perkins 1300 generator set Generator Stamford Power: 160 KVA / 128 KW Hz 50 RPM 1500 ABR Control SX460 IP 22 Year of manufacture 1997 Hours: 8234 Connection 63A, 32A Metrics: L: 4.00m W: 1.35m H: 2.00m Weight: approx. 3500 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Type of machine: Automatic Winkel Wolf (meat grinder) – 160 mm Manufacturer: SEYDELMANN Germany Equipment: The machine is equipped with two augers – a large feed auger and a working auger for a continuous and efficient production process Lifting system: Built-in automatic arm (lifting device) for LASKA trolleys – 200 liters Workflow: Fully automated process of feeding, lifting and processing the raw material Power supply: 400 V, 50 Hz, 75 A Dimensions: 3200 mm x 1800 mm x 2000 mm Condition: Complete factory renovation by MM SERVICE LTD The machine is offered after a complete renovation with a 1-year full warranty, included in the price of delivery, installation, samples and training.

We sell 4800 x 16Gbs SFPs out of Brocade directors In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all th ...

We sell 2500 x Micron 16GB DDR4 2Rx4 PC4-2666V-RB2-11 MTA36ASF2G72PZ-2G6B2QG COO China 15000 x Micron 16GB DDR4 2Rx8 PC4-2933Y-RE2-12 MTA1BASF2G72PDZ COO Taiwan In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales a ...

Details Turning diameter 165 mm Turning length 1000 mm Total power requirement 2 kW Turning diameter over bed 335 mm Rotary diameter via tool carriage 310 mm large turning diameter via cross slide 168 mm Bed width 250 mm Main spindle diameter 42 mm Main spindle nose CAMLOCK n-5 - DIN 55027 Morse taper 4 Spindle speeds 9 Speed range: 60-2000 rpm max. working feed 0-5000 mm/sec Rapid traverse 5 m/min Shaft diameter 48 mm Tailstock-Spindle Travel 140 mm Machine weight approx. 1100 kg Control CNC Control Name FANUC 21i/210i

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 318 t, 318

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Key data: 520 mm, 520 mm

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

diameter: 160 mm total power requirement: 0 kW Shipping weight: ca. 700 kg Packing: - mm Various chucks, jaws, tensioners etc - see photos The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 318 t, 318

Parotec Slot Plate Pallet Power Grip 160 Stitch Partool Zero Point Clamping System Very good used condition. the dimensions can be found in the pictures. Weight approx. 30kg. There are other Parotec accessories in stock More used interchangeable plates, one face plate D.52cm You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Transnorm belt curve conveyor right GKF 90°-1300-1100-IR900 -- NEW RA2332 Technical data: Frame width (NB): 1300 mm Frame width with Bearing cover: 1400 mm Frame width with Bearing cover and gearbox (MB): 1500 mm belt width (GuB): 1100 mm height (BH): 160 mm height motor below: 360 mm height including motor (MH): 520 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees middler conveying speed (v m/s): 1,5m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 2.2 / S1 Belt: KT 96 new Year of construction: 2021 Optionally available: Supports Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1300 Belt width in mm: 1100 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive  ...

Specifications: X-axis 1,600 mm Y-axis 700 mm Z-axis 800 mm Spindle power 25 kW Spindle speed 100 – 14,000 rpm. Tool holder HSK 63-A Control: CNC SIEMENS Sinumerik 840D Table dimensions 520 x 700 mm Max. table load 800 kg B-axis 360 A° Weight approx. 17,500 kg

Foot switch, safety foot switch, foot pedal -Foot switch: Safety foot switch -Metal housing: with protective cover, die-cast aluminum -Quantity: 1x foot pedal available -Dimensions: 280/160/H130 mm -Weight: 1.4 kg

HAAS EC-1600ZT CNC machining center was built in 2020 in the United States by the renowned brand HAAS AUTOMATION INC. Designed for machining of heavy workpieces weighing up to 4536 kg, the machine is the ideal combination of functionality, productivity and precision. In order to meet this challenge, the machine is equipped with a wide range of equipment such as a rotary table (4th axis), a two-stage spindle and a capacious magazine with automatic tool changer. The HAAS EC 1600ZT CNC horizontal machining center weight approximately 13472 kg. Technical specifications of the HAAS EC-1600ZT milling center - feed in the X/Y/Z axis: 1626/1270/1016 mm - feed in the B axis: 360° - rapid traverse in the X,Y,Z axis: 15.2 m/min - work table surface (L x W): 1626 x 914 mm - clamping plate diameter (rotary table): 762 mm - maximum workpiece weight: 4536 kg - maximum spindle rotational spee ...

pressure: 160 t throat: 360 mm stroke: 500 mm table surface area: 1250x630 mm ram surface: 1000x450 mm table height: 1000 mm dayligth: 800 mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 340 mm stroke: 20-120 mm no. of strokes: 45 Hub/min ram - range of adjustment: 100 mm table surface area: 800x620 mm ram surface: 500x400 mm hole in the table: Ø 360 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2200x2000x3600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standard radiators, car radiators, oil coolers, heat exchangers, compressor radiators, hydraulic oil coolers -Manufacturer: AKG, lightweight metal oil/air cooler with filter from Atlas Copco compressor type GA 408 Pack -Type: 1613 2726/653.92 -Pressure: max. 12 bar -Dimensions: 910/400/H700 mm -Weight: 49 kg

Horizontal machining centre manufactured in 2004. This IRLE IRD 1600 CNC features a maximum pipe diameter processing capability of 1,625 mm and a maximum pipe length of 13,200 mm. It supports a maximum pipe wall thickness of 70 mm and can handle pipe weights up to 250 kN. If you are looking to get high-quality machining capabilities, consider the IRLE IRD 1600 CNC machine we have for sale. Contact us for further details.

CNC shearing machine manufactured in 2024. This GEKA HYDRACROP 165/300 SD features a punching power of 165 tons and a maximum capacity of Ø 40 x 30 mm or Ø 34 × 34 mm. It includes five workstations for various operations such as punching, shearing, and notching. If you are looking to get high-quality shearing capabilities, consider the GEKA HYDRACROP 165/300 SD machine we have for sale. Contact us for further details.

; Gross weight [kg]: 18720; Engine: Baudouin 12M33G1650/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Battery charger and coolant heater; Water Tank Volume [l]: 3000