138,065 used machines on RESALE, but how to find them? Machine Search
Romaco-Siebler HM1/160 vertical strip packing machine for tablets, 3 lanes, maximum foil width 170 mm, includes format parts for tablets with dimensions of 7.2 x 5.6 x 17.5 mm and 11.4 x 6.31/WR8.5, foil reel core diameter 76 mm, maximum foil reel diameter 450 mm, Siemens SIMATIC S7-300, excellent working condition with only approx. 1600 running hours
max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 160 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 18 kg
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -without interchangeable jaws: without -Weight: 4 kg
Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg
weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5500 mm high: 2385 mm weight of the machine ca.: 1,2 t dimensions: 1,72 x 0,8 x 2,4 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
geared motor, electric motor -Speed: 89 rpm -Power: 0.3 kW -Design: B14 angle -Shaft diameter: mm -Protection class: IP 65 -Weight: 10 kg
geared motor, electric motor -Speed: 37 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 20 mm -Protection class: IP 65 -Number: 3x motors available Price: per piece -Weight: 8 kg
geared motor, electric motor -Speed: 19.5 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 22 kg
geared motor, electric motor -Speed: 19.5 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 22 kg
geared motor, electric motor -Speed: 16.2 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 3x geared motors available Price: per piece -Weight: 21 kg
The scope of delivery includes: 01x Locking bracket, used Material colour: sendzimir galvanized Total length: approx. 1,640 mm Leg "A" approx. 39 mm (flanged) Leg "W" approx. 63 mm Bearing surface: approx. 60 mm Leg "C" approx. 13 mm Material thickness: approx. 1.50 mm Weight / piece: approx. 2,330 kg General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
geared motor, electric motor -Condition: Geared motor is unused -Speed: 33 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 4x geared motors available Price: per piece -Weight: 20 kg
geared motor, electric motor -Speed: 2.5 rpm -Power: 0.11 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 2x geared motors available Price: per piece -Weight: 22 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg
end mill, end mill, milling cutter -Outer diameter: 160 mm -Teeth: 16 -needs to be reground -Weight: 10 kg
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 147 tons
Used fluid bed dryer mady by Bühler model OTWG-160, new 1996. Technical data: - Weight 1050 kg - Content m³: 2.7 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.
Chiller ENR160 130KW at 7/12°C, internal P3 pump, internal 390l buffer tank, system is perfectly suited for process applications as it is equipped with a shell-and-tube evaporator and a buffer as well as an internal P3 pump. low GWP refrigerant R454B, winter package, RS485,
Rolling jaws, floating center jaws, low-profile jaws -Dimensions: 160/31/H63 mm -Weight: 3 kg
Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992
Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate -Intermediate plate: for hydraulic press eccentric press -Width: 1630 mm -Length: 1250 mm -Height: 100 mm -Plate: Solid -Groove width: 22 mm -Weight: approx. 1000 kg
Pre- and post-heating coil, air heating element, DN160, 366260, LHE 160 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Unfortunately the type plate has come off - special price Dimplex - 366260 - LHE 160 IS Air heating element Electric pre- and post-heating. 1.5 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +60°C, air flow monitor for detecting the sma ...
Hydraulic pressure switch, pneumatic pressure switch -Type: EDS 1691-NC-016-000 -Pressure: 16 bar -Operating voltage: 24-20 VDC -Signal output: 4-20 mA Price: per piece Quantity: 2 available -Weight: 1 kg
Oven OMIA SECOMAT V-10 Maxi temperature: 160° Internal dimensions: 1000 x 1000 x 1000 mm Equipped with 1 small trolley Voltage: 380 V Width: 2000 mm Depth: 1500 mm Total height: 2000 mm Weight: approx 1 T MACHINE IN VERY GOOD CONDITION
sheet width: 0400 mm coil outside dia.: 1400 mm weight max. in kg: 3000 kg plate thickness: 0,80 - 4,50 mm nomb. of straightening rolls: 7 diam. of the rolls ca.: 80 mm feed rolls: 2 exit pinch rolls: 2 coil width: 600 mm range of expansion ca.: 470 - 530 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler DIMECO type 2371 E-FPS Year of construction 2006 with hydraulic spreading with pneumatic pressure roller from above with 6 pieces of band limiting arms Straightening machine DIMECO type 1676 C-VV Year of construction 2000 with frequency-controlled drive with hydraulic band insertion aid with support table, insertion tongue, Pressing arm from above with pneumatically ventilated roller with side belt guide rollers with pneumatically adjustable belt transfer table The data for this ad was created with ModulMWS - the software solution of ...
Axes Strokes X = 3706mm Y = 2294mm Z1 = 515mm Z2 = 371mm Max rotation 24000 rpm C axis = 360 deg non-stop rotation B axis = 360 deg non-stop rotation 16 position revolver toolchanger
Iseki ZM 160 S, intermediate axle mower (belonging to carrier vehicle unknown), built in 2002, incl. accessories shown: discharge plate, lifting shears, lifting cylinder with lifting shaft and lifting arms. More mowers and grass pick-up technology available! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...
Nominal pressing force... 160t Table dimensions ... 1000 x 740mm Max. ram stroke... 25-160mm Plunger Dimensions ... 710 x 425mm Plunger adjustment ... 100mm Installation height ... 455mm Main engine power ... 11kW L x W x H ... 1380 x 1950 x 3350mm Machine weight ... 12180kg The machine is in good condition, possible to test under electricity.
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer diameter: 180 mm -Quantity: 2 cutters -Bore: Ø 35 mm -Price: complete -Weight: 9.5 kg
Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 210 mm -Number: 2 milling cutters Price: complete -Weight: 8.5 kg
Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 180 mm -Number: 2 milling cutters Price: complete -Weight: 14 kg
One used book sewing machine Meccanotecnica Aster 160 Year of man.: 2000 Description: - Digital display - Optical sheet control - 4 4 opening possibilities Technical specifications: max. signature size. 320 x 420 mm min. signature size 75 x 150 mm max.number of stitches: 11 max. mechanical speed: 160 cycles/min
Key data: 18 KW, 13 1/min
Infinitely adjustable variator motor with belt variator
Resawing saw ESTERER EWD Type: BNK 160 Built in 1986 3-style variable Harmonic machine Cutting height maximum: 165mm Passage width max: 800mm Drive power 2x 75 kW with S-conveyor with Modlwender with chain retraction with centering device at the front with 2-lamella splinter separator with external task (tilt destacking, cross conveyor) good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4.5 rpm -Power: 0.25 kW -Diameter shaft: Ø 40 mm -Construction: B3 -Protection class: IP 65 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 650/290/H320 mm -Weight: 50 kg
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
Key data: 5000 mm, 1600 mm
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: SNGB-160 TN34547 -Quantity: 2 pieces available -Price: per piece -Weight: 3.3 kg/piece
Dear Ladies and Gentlemen, We constantly have transformer stations for wind turbines in every power and voltage.
Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Heat exchanger: Oil cooler, shell and tube heat exchanger -Connections/Dimensions: see photos -Dimensions: 1005/1600/H110 mm -Weight: 13.5 kg
0: 160 mm 0: max./nom.: 1.780/1.447 m³/h 0: v.V./nom.: 3.160/2.450 pa Filter capacity: 12,3 m² weight: 430 kg Dimensions (L/W/H): 1.970 x 910 x 2.070 mm Dust extractor NE 160, J pneum. Filter regeneration ------------------------------------------------ For the extraction and filtering of wood dust and wood chips. GS and H3 testing according to GS-HO-07 (BGHM), vacuum filter with 2 swivel and 2 fixed castors including suction nozzle, with pneumatic Cleaning, 5 m cable with plug and reversing switch, fan included Integrated electric motor IE3 400V / 50Hz, with mobile bin and chip collection bag. Standard is intake manifold on the right / fan on the left. Suitable for standard Sea containers. Technical data / manufacturer description ------------------------------------------------ • Volume flow max./nom.: 1,780 / 1,447 m³/h • Operating volume flow: 2,300 m³/h • Negative pressure ...
Drawbar head, control unit, operating lever, joystick, drive switch, single-axis joystick, spur gear drive, multi-axis controller -Manufacturer: Gessmann, Joystick Multi Axis Controller -Type: 0208873 EP/160 -Quantity: 1x Joystick available -Dimensions: 83/83/H165 mm -Weight: 0.6 kg
maximum number of results exceeded
please refine your search
