mtu 16 v used for sale

Screw clamps with shaft, pipe clamps, pipe fastening -DN: 10/12 -DN: 20/22 -DN: 25/28 -DN: 50/55 -DN: 65/70 -DN: 80/85 -DN: 100/102 Price: complete Package weight: 11.5 kg

Annular seal in link chain design, pipe sealing cushion -Various: Diameter -Can be used as a wall penetration, tank embedding and casing pipe sealing -Transport dimensions: 600/500/H350 mm -Weight: 35 kg

P393 - used approx. 45 m³ / 45.000 L polyester silo, GRP silo, with undercarriage, completely repainted. Technical details: Content: approx. 45 m³ / 45,000 litres Material: Polyester / GRP Silo Manufacturer: Theodor Vanck GmbH Density DIN 1055: max. 1.4 Kn/m³ DIBT: Z-10.2.2-22 Dimensions: approx. Ø 3.00 m × H total 14.00 m / H GRP cylinder 9.00 m Undercarriage measured externally, i.e. incl. steel girder approx. D 2.56 m × W 3.96 m Undercarriage measured inside, i.e. without steel beam approx. D 2.16 m × W 3.46 m × H 3.70 m Other: Silo and undercarriage were repainted by us, see photos. All parts fit on a truck. Used polyester silo, cleaned, in good condition, former salt silo. Standing silo made of GRP, on load-bearing steel structure / undercarriage, dome on top of the roof, several inlets and outlets. Incl. ladder and railing on top of the silo, see photos. Th ...

Stock number: 3904 PROCESSING Manufacturer: BRIDGEPORT, Type: VMC 1000 30 Machine NO.: 822918, Year of manufacture: 2002 Specifications: Table size 1150 x 580 mm Large table load 800 kg Longitudinal movement (X) 1020 mm Transverse movement (Y) 510 mm Vertical movement (Z) 500 mm Spindle cone ISO 40 Spindle speeds 6000 rpm Total power 25 KVA Tool changer 30 places Control Heidenhain Fabr. Accessories: Chip conveyance. Length: 2200 mm, Height: 2800 mm, Width: 3200 mm, Weight: 4400 kg

Vaisala MI70 - Package with a lot of accessories. - MI70 - HMP76B,(chemical purged and sensor preheating), last calibrated on 29.11.2022 - HMP77B, (chemical purged and sensor preheating)last calibrated on 29.11.2022 -Suitcase -Charger - MI70SET - Carrying strap for the suitcase - 2 x 211302, Calibration Adapter Set for HMK15 Calibrator - 211339 Connection Cable for 300-Series - 219687 USB Instrument Cable - 219685 USB - RJ45 Adapter Cable - MI70 Link Interface Software - Calibration documents for each sensor from 29.11.2022 The device can be tried out before purchase by arrangement in 28844 Weyhe. Optionally, I can also offer recalibration from the manufacturer or an accredited test laboratory.

Machine: 3-level deck press gluing star Brand: Altec Type: EB3P-6/18 B (Vario) Year of manufacture: 2000 CE Specifications: Press length: 3,740 mm Pressing units per floor: 3 places Insertion depth: 1,080 mm Press thickness: up to 80 mm Minimum press length: 400 mm Pneumatic pressing pressure: 25,000 N to 35,000 N at 10 bar Pneumatic hold-down devices: instead of mechanical (was an optional accessory) 18 pieces Pressure beams per working level: 6 x 600 mm Useful stroke: 50 or 80 mm Star rotatable: with hand crank Height: 1,900 mm Depth: 1,680 mm Length: 4,320 mm Weight: 1,700 kg

Stand height approx. 5000mm Longitudinal beam approx. 6000mm Load capacity 125 kg Working dimensions see pictures

revolutions per minute: 8000 U/min x-travel: 1000 mm y-travel: 500 mm z-travel: 570 mm Control: Siemens weight of the machine ca.: 5000 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Sabroe VMY 447 H screw compressor unit on NH3 (Ammonia). Complete with a Leroy Somer PLS 315LG2 B3 electric motor - 50 Hz - 355 kW - 2960 RPM, Sabroe OHU 4131 oil separator with a volume of 610 liter, Sabroe OWSG 2719x2 oil cooler, Sabroe OF 2108 oil filter, oil pump and a control cabinet. Specifications: Brand: Sabroe Type: VMY 447 H Refrigerant: NH3 (Ammonia) kW at -40ºC/+25ºC: 525,0 kW m³/h: 2675 m³/h Dimensions: 3500x1640x2750 mm (LxWxH) Amount in stock: 1

Milk pipe fittings, milk pipe nuts, stainless steel fittings -9x Size: DN 65 -9x Size: DN 80 -5x Size: DN 100 -Screw connection: 23 Price: complete -Weight: 12 kg

Terminal block, terminal block, feed-through terminal block -5x: 165 113 16 -8x: 111 035 05 -4x: 115 129 14 -4x: 165 130 23 -14x: 112 579 24 -4x: 115 124 07 -4x: 165 115 10 -1x: 116 298 27 -3x: 115 142 11 -1x: 115 120 17 Price: complete -Weight: 38 kg

Sensor module, G2 flat module, safety switching device -1x: HR-121126 -1x: VAA-4E-KF2-ZE -3x: KFA6-ER-16 Price: complete -Weight: 3 kg

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m Machine completely overhauled with 12 months warranty Mechanically and optically like new Photo from Kellenberger brochure Fanuc 21i control -Grinding head UR 1-2-3 external/internal/plan -Axis automatic 1° Hirth serration -Active longitudinal positioning KEL-POS Movomatic -Semi-automatic balancing device KEL-BALANCE -Grinding wheel equipment left 400mm diameter -Grinding wheel equipment right 300mm diameter -Internal grinding unit with belt drive -Tailstock with micro-adjustment -fine adjustment upper table -Paper belt filter SBP4 240l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Sizes: various -Sale: only as a package -Weight: 0.8 kg

Type of mixer Height 1700 mm Width 1300 mm Length 3500 mm Capacity 2000 l Power supply: 400V 50Hz 3N Total power 18 kW Main Material Stainless steel, acid-resistant Agitator Type Vane Agitators Product ejection Pneumatic bottom flaps, product ejection from below Loading No loading, it is possible to buy a pillar loading for the machine Mixer Type Open Mixer Number of rollers Twin shaft

Drill bushings -10x Type: Z10W/36/15 -10x Type: Z10W/36/30 -9x Type: Z10W/36/10 -9x Type: Z10W/36/9 -10x Type: Z10W/36/14 Price: complete -Weight: 4 kg

Disc cutter, saw blade, cutter -various: diameters -Type: HSS/E Price: per set -Quantity: 2 sets available -Weight per set: 3 kg

Disc cutter, saw blade, cutter -various: manufacturers -Various diameters: Ø 45 mm - Ø 90 mm, width 1 mm - 8 mm Type: HSS -Sale: only complete set -Weight: 8 kg

Radius cutter, milling cutter -Finish cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS Quantity: 16 pieces -Sale: only complete set -Weight: 9 kg

Brand NN Year of Make: Unused Dimensions LxWxH (mm) 4 big bags 1200 x 1200 x 2000 Weight (Kg) approx. 4474 large / 4386 net Made in China Comments New / Unused, models like mentioned on pictures Condition of sale Only as 1 lot

Radius cutter, milling cutter -Finishing cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS -Quantity: 17 pieces -Sale/Price: complete -Weight: 5 kg

end mill, end mill, milling cutter -Finishing cutter -Various: Diameter -Various: Manufacturers -Price/Sale: complete -Quantity: 7 pieces -Weight: 9 kg

fixed point, fixed center point, fixed Morse taper, fixed center point -Toe: shaft-mounted -Photo: see pictures -Weight: 1 kg

; Gross weight [kg]: 3350; Engine: Volvo TAD1341GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515

Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5500x1400x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L, built 2026 --------------------------------- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beam ...

Dough divider weigher Model: Stress Free Divider VS - VX 021 Bread weigher in stainless steel design Weight range approx. 200 to 1200 g Hopper approx. 80 kg for doughs with high TA Touch control Output adjustable ca. max. 800 pieces/hour Machine mobile with 2 brakes Belt Flourer and Belt Scale Connection 400V, 16A-CEE plug Machine More bakery equipment in stock!

MIG/MAG hose package extension, intermediate hose package -Length: 33 m -Version: Dinse plug, gas hose, control cable -Weight: 72 kg

Punching tools for window construction -various types: AM 06 93 -993333/993352-1/993335/993334/94-234907 -Sale: only complete set -Total weight: 50 kg

resistor, wire potentiometer, resistor -Type: 208-8 56R 10% R -Price/Sale: complete -Quantity: 260 pieces available -Weight: 1.2 kg

POLYMERISATIONSOFEN Höchsttemperatur: 220ºC NÜTZLICHE INNENABMESSUNGEN Länge : 2.500 mm Breite : 1.150 mm Höhe: 500 mm Material der Außenfläche: 1mm Karbon-Blech Material der Innenfläche: 1 mm verzinktes Stahlblech Dicke der Isolierung: 150 mm Isolierung: Steinwolle (50 kg/m³) Wärmeübertragung : Konvektion durch geschlossenen Luftkreislauf Art der Beheizung : Direkte Beheizung mit elektrischen Heizkörpern Temperaturregelung : Ein/Aus, 0-400ºC Digitaler Thermostat, Fe-Const (J-Typ) Thermoelement Umgebungstemperatur : +10ºC (während des Betriebs) Gleichmäßigkeit des Ofens: ± 2,5ºC (5ºC insgesamt) Regelgenauigkeit: ±1ºC Aufheizzeit : 25-30 Minuten, leerer Ofenzustand Ofentür : Isoliert mit Steinwolle, automatische pneumatische Guillotine-Tür Manuelle Steuerung des Öffnens/Schließens über Joystick Beschickung/Entnahme : Manuelles Einschieb ...

KASTENOFEN ZUM EINBRENNEN VON PTFE TEFLON BESCHICHTUNGEN Konvektionsofen zum Aushärten von PTFE-beschichteten Werkstücken Maximale Temperatur - 500ºC Heizquelle - Elektrizität Erzwungene Zirkulation Innenraum aus rostfreiem Stahlblech AISI304 200mm Dicke der Isolierung

Exhaust Manifold for Volvo Penta D12 Volvo Part Number: 849134

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.55 kW -Speed range: 8-72 rpm -Motor: adjustable -Drive shaft: Ø 22 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 650/203/H220 mm -Weight: 30 kg

Dear Ladies and Gentlemen, We have the following machine to offer: OKUMA EUROCENTER V50 Year of Make: 2002 Control: OSP U10M Machine hours (spindle running time): 18,074 Without vises and chuck

Cylinder head for Wärtsilä Vasa R32 engine, ready to install

clamping force: 200 kN injection volume: 80 cm³ screw diameter: -- mm platen size: 350 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 20 t - clamping force: 200 kN - Heating platen size: 350 x 300 mm Injection unit: - Injection volume max.: 80 cm³ - Connected load: 3x 400 V, 50 Hz - Pump output: 11 kW - Total output: 44 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Space requirement approx: 3 m² Weight approx.: 2.500 kg There is also an identical system as a spare parts dispenser as an option for an extra charge. The control panel is missing here. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 20/40 rpm -Power: 0.15/0.28 kW -Construction: B3 -Diameter shaft: 32 mm -Protection class: IP 54 -Dimensions: 520/210/H240 mm -Weight: 27 kg

two-armed drill, rotary drill, magnetic drill -Recording: MK3 -Nominal consumption: 1100 W -Connection: 380 volts -Max. Drill diameter: 32 mm -Dimensions: 550/560/H150 mm -Weight: 17 kg

Key data: 800 mm, 2000 mm, 800 mm

Model V 800 Machine no. 1049.2955-07 Year of manufacture 1980 Circumferential diameter over bed 800 mm Turning length 2,000 mm Center width 2,000 mm Spindle bore diameter 128 mm Number of bed sleds 1 Quill Cone Morse 6 Voltage 380 V Three-phase current 50 Hz incl. documentation

clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 300 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 300 x 300 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 76A fuse protection (incl. peripherals) - Pump output: 7.5 kW, 14.9 A - Total output: 28 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Weight approx.: 2,250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.