mtu 12 v used for sale

2 keer op voorraad nbsp; + geleiding Capacity: 125 kg

Besturing: Siemens Sinumerik (achteraf ingebouwd) Siemens-aandrijving: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1270 mm Longitudinal travel X-axis (autom.): 610 mm Cross-travel Y-axis (autom.): 1310 mm Travel Z-axis (autom.): 565 mm Dimensions of the table: 1215 x 1250 mm Dimensions magnetic table : 1250 x 500 mm Distance between table -- spindlecentre: 680 mm Spindlespeeds: 0 - 2800 rpm Motorpower: 15 kW ACCESSORIES: yes Cooling system: yes

Stock 14R5-P / 1250 P - laminating machine year 2004 max. size 1,250 x 1,640 mm min. size 500 x 500 mm paper 100-400 gm2 Solid Board max. 350 g Corrugated board max. 7 mm in production good condition

12 WINDERS, BARMAG CRAFT WINDERS CW6-1200/ 6 ENDS PER CHUCK , max. dia 440mm, stroke 170 mm

Key data: 1200 t, 1000 mm

Hydraulic Press Gigant 1200 ton Year of construction: 1993 Dimension table: 3700 x 2700 mm Dimension lower table: 3700 x 2700 mm removable Light max: 1590 mm Light min: 610 mm Slide stroke: 1000 mm Cushion stroke: 400 mm Side upright clearance: no

Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm   Platen size (mould plate) approx: 745 mm × 770 mm   Minimum mould height (installation height): approx 300 mm   Mould opening (stroke): 600 mm   Maximum daylight between plates: approx 900 mm   Screw diameter: 40 mm   Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet   Motor power / drive: 18.5 kW drive power (pump drive)   Heating power: around 11 kW  

fire: SCM Technology, model: CM 1200 Mobile, Year of construction: 2010, Length: 11.000 mm, Width: 2.700 mm, box: 8.000 mm, Engine: Diesel engine, Cutting: 1000 x 900 mm, Stamper: 1 x 200 tons, General conditions: working, Cutting force: 1200 tons, Weight of machine: 53 tons

: 1250 mm tank diameter / tank height: 1000 / 350 mm turning speed range: 920 / 1415 U/min voltage: 380 V volumn: 125 Liter power requirement: 1,9 kW weight of the machine ca.: 600 kg dimensions: 1,4 x 0,9 x 1,5 m Complete vibratory finishing system with conveyor unit See images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Siemens Megalix CAT 125/15/40/80-121 GW Focal spot 0.3/0.6/1.0 Tube Housing Model No. 5764522 Tube Model No. 3800351 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Siemens Megalix CAT 125/15/40/80-122 GW Focal spot: 0.3/0.6/1.0 Tube Model No. 3800351 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Siemens Megalix CAT 125/15/40/80-122 GW Focal spot: 0.3/0.6/1.0 Tube Model No. 10144179 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

CTP plate setter Advantage DL+ Plate developing machine VPP 68 Find more here - / Contact us at -

Manufacturer: FRECH Model: DAW 125 S RC Year of Manufacture:1998 Type of Machine : zinc die-casting system Condition : The machine is fully functional and was used to manufacture bathroom accessories (shower handles). After just over a year of downtime, an oil change is required. Locking Force: 1250 kN Working Pressure: 105 bar Machine Weight: 6000 kg Rated Current: 40 A Rated Voltage: 3×400 V Control Voltage: 24 V Frequency: 50 Hz Find more here - / Contact us at -

Technical data of the pallet rack crossbar: Shelving system: META Thyssen The scope of delivery includes: 01x Pallet rack crossbar, used Material color: RAL2001 orange Truss type: HN 120|20 Box profile: 120 x 50 mm Agraffe: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of trusses 2,700 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Manufacturer: Burkhardt + Weber BW Model: MC 120 Year of Make: 1999 Condition: Used Control: Siemens Sinumerik 840C Pallet sizes: 4 pieces 1000 x 1000 mm, 2 pieces 1250 x 1000 mm, 13 pieces 1600 x 1000 mm Pallet system length: 47000 mm Clamping area: 630 x 800 mm Table load: 1500 kg Spindle taper: DIN 50 Spindle speed: 6000 rpm Engine power: 37 kW B-axis travel: 360° Tool magazine: 144 positions Fuel tank capacity: 230 l Spindle bearing and spindle housing overhauled 09/2024.

120 mm diameter pile driver suitable for Hammer HM100

100 mm diameter pile driver suitable for Hammer HM100

NEW, 140 cm wide, with Martin M10 mount, 123 kg net weight, suitable for 5.6 - 9.0 t excavators

2450 h, with 3 hyd. Side brush, 3-cylinder diesel engine, high dump, sweeping width: 1.52 m, maximum theoretical sweeping capacity 30,500 sqm / h, 1810 kg net weight, dimensions approx. 2480 x 1440 x 2030 mm

MODUL ZFWZ 1250x14I gear hober (can do 1580 mm) Max. Diameter: 1250 mm Cutting width: 600 mm Module 2-16 Maximum size of the hob: 240 x 280 mm Table diameter: 1020 mm Speeds: 28 – 200 rpm Axial feed rates: 0.28 – 8 mm/min Radial feed rates: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Stand tilt – left/right: +/- 45 Main motor power: 5 / 19.5 kW Power of the rapids motor: 12,5 kW Max. diameter of the part without tailstock: 1,250 mm Max. diameter of the part with tailstock: 800 mm Weight of the machine : 16 t Machine dimensions approx. 4.5 x 2.1 x h 3.3 m EQUIPMENT: Extended driven shaft for gear cutting up to Ø 1580 mm Capability to work with hob cutters Ø 235 mm and length 380 mm. Inverter control of the main electric motor. Expanded set of change gears

1 gebr. Boiler -------------------------------- Manufacturer : LOOS Gunzenhausen Type : UL-S 1250 Heating surface approx. : 25 sqm Capacity : 1,000 kg/h Operating overpressure : 13.0 bar Increased test pressure : 24.7 bar Ab. Operating temperature : 195° C Water content up to NW approx. : 1.785 l Water content full approx. : 2.320 l CE marking : CE 0036 Year of manufacture : 2006 equipped with Weishaupt gas/oil burner GL5/1-D/ ZMD, separate control cabinet, gas control system, feed water pump, and the existing coarse and fine fittings.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 10.0 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 2008 CE mark : 0036 equipped with Weishaupt gas burner G7/1-D, ZMD, 300-1,750 kW, 15-500 mbar, gas control section, Control cabinet with touch panel, feed water pump, ECO and the existing coarse and fine fittings.

A Reis spotting press for tool and mold making is available. Pressing force: 1000kN, clamping area: 1200mm/1500mm, installation height: 1575mm, max. mold weight: 10000kg, max. tilting plate load: 4000kg, ram stroke: 1450mm, return force: 400kN, hydraulic pressure: 190bar, pneumatic pressure: 5bar. Machine dimensions X/Y/Z: approx. 3200mm/4500mm/4100mm. Documentation available. On-site inspection possible.

Total connected load 21.7 kW Bj Ud Devu Dncevycolp Pump motor 18.50 KW Weight 7,400 KG

Clamping Force: 1000 ton // Shot Weight (Max): 6995 g

Volume (Ml): 125 ml // Format: Slim

Output: 15000 U/h // Bottle Size: 1500 ML

• One pair of original WEBER screws (excellent state, including measurement report • One pair of non-original screws Be Udowaxuae Dvycsww • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS-control • Output on PVC around 700 kg/hour

Broaching machine Karl Klink Technical data can be found in the photo

Circular screen feeder with a maximum filling volume of 1,000 l.; Motor power spread arm: 15 kW; Motor power turntable: 0.55 kW. Container diameter: 1200 mm; Plate diameter: 1600 mm; Hopper diameter at the top: 1400 mm. Discharge height: Approx. 730 mm; Screen height: 300 mm / Perforations: 30 x 15 mm (oval). Spreading arm provided with scraper plates made of Hardox. The scope of delivery includes a control cabinet with frequency converters for regulating the speeds of the platter and spreading arm.

table length: 3000 mm table width: 1500 mm burner heads: 1 Control: CNC workpiece weight: 900 kg traversing speed: 91 m/min weight: 4980 kg dimensions of the machine ca.: 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 12 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 1 ...

1 LAFER emerizing machine type GSI 124A, year 2000, roller width 220 cm, 6 brushing rollers with new ceramic brushing, entry and exit on the same side, with suction, touch screen, PLC and inverter controlled

table length: 3048 mm table width: 1524 mm burner heads: 1 Control: CNC workpiece weight: 1450 kg traversing speed: 200 m/min weight: 5010 kg dimensions of the machine ca.: 9450 x 2240 x 2520 mm Laser cutting machine with automatic shuttle table Configuration 1. BodorPower laser source 12 kW 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Stretched aluminum portal 6. One-click fully automatic processing 7. Automatic layout of residual material 8. Edge detection and automatic zeroing of the focal length through intelligent detection 9. Bodor Lightning perforation technology 10. 21.5-inch monitor with touch function 11. Intelligent control of gas pressure 12. Automatic adjustment of cutting gas pressure 13. Bodor Mango® ergonomic remote control 14. Active anti-collision function 15. Intelligent vibration pro ...

General SKU393U1107 LocationBarneveld MakeKrauss Maffei TypeDZU 125/2,5 No.9670 Year of construction1983, rev 2001 Main Features MaterialStainless steel/Halar Motor22 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Capacity382 l Basket sizesø 1250 x 630 mm Wall thickness12 mm Max. loading weight477 kg With bottom dischargecheck With scrapercheck Hydraulic operatedcheck Liquid outletø 150 mm With hydraulic unitcheck Motor22 kW (400 V) Max. basket speed950 rpm MaterialHalar coating, Stainless steel 1.4571 (316Ti), Stainless steel 1.4581 (348) Information Mounted on framecheck Total height1.5 m Weight3000 kg Floorspace2.5 x 1,5 m ATEX compatiblecheckBasket centrifugesKrauss MaffeiCentrifuges > Basket centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition ...

General SKU429U1376 LocationBarneveld MakeFlottweg TypeZ42 Z3L No.F 738 Year of construction1978 Main Features MaterialStainless steel Motor22 KW Specified Features - Decanter 3-Phase decantercheck Screw diameterMax. 420 / min. 226 mm Screw length1245 mm InletDia. 46 mm Liquid outlet110 mm Solids outlet700 x 260 mm Motor18,5/22 kW, 400 volt With variable speed drive1465/2935 rpm With hydraulic unitcheck Motor11 kW, 380 volt, 1460 rpm MaterialStainless steel 1.4307 (304L) Information Mounted on framecheck With switchcheck With switchgearcheck Weight3000 kg Floorspace1,4 x 2,8 m Total height2,1 mDecantersFlottwegCentrifuges > DecantersBrand > Flottweg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, T ...

General SKU212T495 LocationBarneveld MakeBarriquand TypeIXASP 7+6/12X1x1000x220 No.26070 E Year of construction2001 Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface4.3 m2 Specified Features - Plate heat exchanger MaterialStainless steel Plate heat exchangerscheck Number of stages:1 Heating surface4,3 m² Capacity35 Ltr. Max. temperature-10/200 °C Information Total height1,1 m Weight500 kg Floorspace1,25x0,5 mPlate heat exchangersBarriquandHeat exchangers > Plate heat exchangersBrand > Barriquand What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU207S950 LocationBarneveld MakeJulabo TypeFC-1200S Pressure Working pressure1.2 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,26 - 1,2 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8 - 11 Ltr. With pumpcheck (Immersion Pump) Capacity22 Ltr./min Information Mach.No.10071327 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

General SKU207S949 LocationBarneveld MakeJulabo TypeFC-1200S Pressure Working pressure1.2 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,26 - 1,2 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8 - 11 Ltr. With pumpcheck (Immersion Pump) Capacity22 Ltr./min Information Mach.No.10070753 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

General SKU349T951 LocationBarneveld No.61.006 Year of construction1984 Main Features MaterialStainless steel Volume2000 Ltr. Motor5.5 KW Specified Features - Tumbler mixer Tumbler mixercheck Double cone tumbler mixercheck Capacity2000 Ltr. (± 1300 Ltr. net) Inlet50 mm (conus inlet dia. 100mm) With motor5,5 kW 220-242/380-420 Volt With brake motorcheck MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck With switchgearcheck(as is) Floorspace2x2,5 m CEcheck Total height4,05 m Weight3500 kg Extra Specificationsis supplied with control components (as is) Tumbler mixersServoliftMixers > Tumbler mixersBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

General SKU316S1017 LocationBarneveld Makeunknown missing type plate Main Features MaterialStainless steel Volume1200 Ltr. Specified Features - Silo MaterialStainless steel Silocheck Closedcheck Capacity1200 Ltr. Sizesdia. 1280x1350 mm Conical height600 mm Conical bottomdia. 400 mm Dished topcheck Manholedia. 300/450 mm Inletdia. 200 mm Top connectionsdia. 95 mm Outletdia. 400 mm Information Total height1,5 m Weight250 kg Floorspace1,45x1,45 mSilos-Tanks > SilosBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU343T932 LocationBarneveld MakeFriedhelm Stechel GmbH (D) TypeADF-120 No.D11704 Year of construction2004 Main Features MaterialStainless steel Motor1.5 KW Inlet diameter745 mm Specified Features - Coating pan MaterialStainless steel Coating pancheck Batch size150 kg Pan diameter1200 mm Pan depth640 mm In-/Outletdia. 745 mm Motor1,5 kW 400 Volt Information Total height2,0 m Weight400 kg CEcheck Floorspace1,7x1,3 mCoating pansFriedhelm StechelCoating pans > Coating pansBrand > Friedhelm Stechel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU343T930 LocationBarneveld MakeFriedhelm Stechel GmbH (D) TypeADF-120 No.D11904 Year of construction2004 Main Features MaterialStainless steel Motor1.5 KW Inlet diameter745 mm Specified Features - Coating pan MaterialStainless steel Coating pancheck Batch size150 kg Pan diameter1200 mm Pan depth640 mm In-/Outletdia. 745 mm Motor1,5 kW 400 Volt Information Total height2,0 m Weight400 kg CEcheck Floorspace1,7x1,3 mCoating pansFriedhelm StechelCoating pans > Coating pansBrand > Friedhelm Stechel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU343T931 LocationBarneveld MakeFriedhelm Stechel GmbH (D) TypeADF-120 No.D11904 Year of construction2004 Main Features MaterialStainless steel Motor1.5 KW Inlet diameter745 mm Specified Features - Coating pan MaterialStainless steel Coating pancheck Batch size150 kg Pan diameter1200 mm Pan depth640 mm In-/Outletdia. 745 mm Motor1,5 kW 400 Volt Information Total height2,0 m Weight400 kg CEcheck Floorspace1,7x1,3 mCoating pansFriedhelm StechelCoating pans > Coating pansBrand > Friedhelm Stechel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU345S668 LocationBarneveld MakeKrauss Maffei (D) TypeHZ 125/3.2 Si No.11437 Year of construction1994 Main Features MaterialStainless steel Motor55 KW Specified Features - Peeling centrifuge Peeler centrifugecheck Basket sizesDia:1250 x800mm Wall thickness20mm Max. loading weight498 Kg With hydraulic unit(controls) Motor55 kW 380 Volt (EEx de II c T4) With variable speed drivecheck Max. basket speed1220 rpm With scrapercheck MaterialStainless steel 1.4571 (316Ti) Information Mounted on foundation platecheck Floorspace4,5x2,3 M Total height2,7 M Weight7000 KG ATEX compatiblecheck Extra Specifications-Filter area 3,14m². -Discharge with feedscrew. Peeling centrifugesKrauss MaffeiCentrifuges > Peeling centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shi ...

General SKU393U1104 LocationBarneveld MakeKrauss Maffei TypePZU 125 No.8740 Year of construction1975 Main Features Materialmildsteel/halar Motor22 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Capacity316 l Basket sizesø 1250 x 500 mm Wall thickness12 mm Max. loading weight550 kg With bottom dischargecheck Liquid outletø 150 mm With hydraulic unitcheck Motor22 kW (400 V, 1465 rpm) Max. basket speed950 rpm Materialcarbon steel ST52 1.0570, Halar coating Information Mounted on framecheck Total height1.5 m Weight5000 kg Floorspace2.5 x 1,5 m ATEX compatiblecheck Extra SpecificationsHalar coated Metal contact parts Hastelloy-C Basket centrifugesKrauss MaffeiCentrifuges > Basket centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price  ...

General SKU299X419 LocationBarneveld MakeCoperion Werner & Pfleiderer GmbH Stuttgart TypeKP-120/250 KombiPlast Compounder Mach.No.20493087 Sizes Screw diameter120 mm Main Features Motor310 KW Inlet diameter200 mm L/D15 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter120 mm L/D15 Counter rotatingcheck Electric heating4 Water coolingcheck DC-motor310kW, 440V, 1780rpm With variable speed drivecheck Screw speed365rpm Feeding with hoppercheck Feeding with metering screwSide feeder MaterialNitriding Steel 1.8550 Information Year of construction2004 With switchgearcheck (as is) Weight± 22.000 kg Extra SpecificationsComplete line with side-feeder, discharge screw and partially control cabinet info compounder: Krupp Werner &: Pfleidere GmbH typ: D315 EXT Single screw screw dia: 250 mm screw lengte:1500 mm. screw van be heated L/D: ...

General SKU388X976 LocationBarneveld MakeFidi GmbH TypeD120 WTX-U2 No.31622 Year of construction2005 Technical specs Max. temperature200 °C Main Features Capacity4 Ltr./Hr. Specified Features - Distillation Distillation installationcheck Capacity180 dm3, (120 dm3) Vessel sizesDia. 500 mm Number of columns:1 Motor9,5 kW, 400 volt, (Ex) With condensercheck With receiving flaskcheck With pumpcheck MaterialHalar coating Information Mounted on framecheck With switchcheck Weight335 kg CEcheck Floorspace1,94x1,03 m Total height2,18 mDistillationFIDI GmbHColumns > DistillationBrand > FIDI GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

General SKU335X748 LocationBarneveld MakeMöstl Anlagenbau GmbH No.1738 Year of construction2019 Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume128 Ltr. Motor0.18 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity128 Ltr. Vessel sizesø 400 x 812 mm Dished bottomcheck Dished top sidecheck Top connectionscheck Outletcheck DN35 with valve With jacketcheck (23 Ltr.) Max. temperature0 / 150 °C With propellor stirrercheck Motor0,18kW, 230/400V, 1360rpm Speed mixing shaft270 Stainless Steel Reactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435 (316L) Information Total height1,60 m Weight255 kg CEcheck Floorspace0,70x0,70 m Extra Specifications Electrochemical polishing, surface roughness Ra ≤ 0.4 µm Equipped with ...

RLA 1213 Clean air extraction system 400V 1.5 KW Volume flow max. 1140 m³/h Suction nozzle 120mm Filter area of 5.1 m² Chip collection volume 135 litres mobile Weight of 121 kg G&STÜ-5131201

General SKU335X746 LocationBarneveld MakeMöstl Anlagenbau GmbH No.1736 Year of construction2019 Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume128 Ltr. Motor0.18 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck Capacity100 Ltr. (128 Ltr.) Vessel sizesø 400 x 1080 mm Dished bottomcheck Dished top sidecheck Top connectionscheck Outletcheck DN40 (with valve) With jacketcheck (23 Ltr.) Max. temperature0/170 °C With propellor stirrercheck Motorcheck (0,18 kW 3x 230/400V 1360 rpm) Speed mixing shaft270 rpm Information Floorspace0,75 x 0,75 m CEcheck Total height1,5 m Weight250 kg Extra Specifications Electrochemical polishing, surface roughness :Ra ≤ 0.4 µm Equipped with ...