126,661 used machines on RESALE, but how to find them? Machine Search
sheet width: 1270 mm plate thickness: 2.0 mm daylight opening: 48.0 mm daylight opening: 150 mm ohne Segmente bending angle max.: 0 - 135 ° work height max.: 900 mm weight of the machine ca.: 465 kg dimensions of the machine ca.: 1620 x 1070 x 1280 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for ...
: 4.0 mm : 3.0 mm : 30 - 120 Grad blade length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3.0 kW weight: 850 kg range L-W-H: 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, ...
sheet width: 1250 mm plate thickness: 1.5 mm roll length: 1270 mm roll diam. toproll: 75.0 mm engine output: 1.5 kW weight: 400 kg range L-W-H: 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 120 mm capacity 90 degrees: flat: 120 x 102 mm capacity 90 degrees: square: 112 x 112 mm capacity 45 degrees: flat: 78 x 78 mm capacity 45 degrees: round: 80.0 mm capacity 60 degrees: flat: 50 x 43 mm capacity 60 degrees: round: 50.0 mm cutting speed: 35 - 80 m/min saw band length: 1440 x 13.0 x 0.65 mm voltage: 230 V engine output: 1300 Watt weight: 18.0 kg range L-W-H: 520 x 400 x 900 mm Portable metal band saw for cuts between 0° and 60° Dry cutting (no coolant) Up to 60% faster cutting compared to a conventional band saw thanks to the NG system with opposite direction of rotation of the saw blade. - Dry cutting (no coolant) - Innovative, coupled band tensioner . for checking and setting the correct band tension - Steel vice with prism-shaped guide - Powerful 1300 W motor - Constant Speed setting with current limitation - Stable, robust frame made of sectional stee ...
Heraeus Weathering Tester Xenotest 1200 CPS Xenon device for testing the lightfastness and weathering resistance of materials under simulated conditions Electrical connector Voltage: 400 V Rated current: 50 A max. Connected load: 33 kVA max. Cable intake of the xenon emitters: 2.8 - 6 kW per emitter Compensation: 3 capacitor a 50 uF Hours: 3888 More items - new and used - can be found in our shop! International shipping costs on request!
Haas Laser HL 1203D Optics Construction: 22-31-21-BX Laser class 4 1500 W 1064 nm More items - new and used - can be found in our shop! International shipping costs on request!
Manufacturer: Radenska-Steinle / Germany Type: RP 20/125 Spray heads: 20 Bottles 0.50 + 1.00 L + 1.5 liters Complete V2A Running Direction: Left to Right Year of Make: 1996 With control cabinet Film available - Please request
Briquetting press type GP 120 Tandem Briquetting press for briquetting chips, wood chips and dusts incl. autom. Level detector - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Control cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic power unit: approx. 300 l tank for hydraulic oil - Weight: approx. 1,100 kg 2 = 2,200 kg Used briquetting press in good condition W-pliers cylinder, pliers (RB 120 reinforced), pliers connection flange renewed on one side (left in the direction of conveyance) briquetting | Briquette Press | Briquetting Presses | Briquette Press | Briquetting # Briquetting press type GP 120 Tandem Briquetting ...
max. workpiece diameter: 1000 mm min. workpiece diameter-at internal hobbing: 100-500 mm workpiece length - max.: 500 mm control: Siemens Sinumerik 840 D swing dia.: 1250 mm Workpiece spindle flange diameter: 520 mm work piece spindle speed range: 0-440 U/min weight of the machine ca.: 25 t dimensions of the machine ca.: 5100 x 3034 x 4500 mm Table travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mm Table speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axis Equipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentation The data for this ad was cr ...
Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 171 kg,
Table dimensions: 1250 x 750 mm Motor output: - kW Air consumption: - m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment8 ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmBar diameter max.65 mmMax. Turning Length1200 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperCapto C6 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.75 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...
RAMATIK - Automatic machine for the production of concrete products on a concrete surface (track). Manufacturer - JOSEF RADINGER – Klagenfurt - Austria Year 2007 The machine is of Austrian origin. Massive construction and very flexible. The wheelbase is 120 cm. It operates on 380 V. The minimum fuse rating is 35 A. The weight of the machine without the model is approximately 5 tons. The machine operates via Hawe hydraulics and electromagnetic valves. The machine was last generally renovated in 2021 It is set via a touch monitor. touch. The program on the screen can be programmed in any language. The machine can be converted into a stable machine because it has an internal table with high-frequency vibrators. The machine includes two sets of vibrators and up to 10 metal molds (models) for concrete blocks, concrete corner blocks and external chimney blocks. The machine ...
Bohrleistung in Stahl (-Ø: 45 mm throat: 1250 mm workpiece height max.: 1100 mm swival range +/-: 360 ° height adjustment: 745 mm base plate surface area: 1450 x 920 mm Bohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mm max. torque on the spindle: 250 Nm feed power: 14000 N turning speed range: 20 - 1200 U/min feed range: 0,063 - 0,63 mm/U drilling capacity steel/cast iron: mm power capacity: 3,7 kW weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Build with double hirth coupling - T slot 22 with Jump off 200 mm - Diameter off center hole 50 mm
- Fixed steady rest 4 units - Fixed table dresser for stone dressing - Face plate head and rear support ca 800 mm - Stone grinding speed 27-24 M/Sec - Coolant and filtration system - In feed stone 0,0025 mm - Acurite Dro with Heidenhain scales - Maximum segment wheel 1600 mm
- New hydraulics 2015 - Bed length 3540 mm - Stroke in X 1200 mm - Stroke in Z 300 mm - Speeds 18 steps from 6 to 675 Rpm
- Bowl volume 120 liter - Out side diameter 910 mm - Width processing channel 210 mm - Overal channel length 1950 mm - Power 0.75 kW
Manufacturer: Elumatec Model: SBZ 122/31 Year of Manufacture: 2007 Type of Machine : Bar Processing Center Processing Length: 3750 mm with bar support / 3500 mm without Axis Travel: X = 350 mm, Y = 280 mm, Z = 300 mm Speed: 30 m/min positioning speed (all axes) Accuracy: ±0.1 mm Spindle: 6 kW, 21,000 rpm, HSK F63 Tool Stations: 5 Max. Tool Diameter: 200 mm (manual), 92 mm (automatic) Max. Saw Blade Diameter: 500 mm Air Consumption: ~50 l per cycle Compressed Air Requirement: >7 bar Power Supply: 400 V, 3-phase Find more here - / Contact us at -
A Morlock single-color pad printing machine is available. Ink system: cup system, oval print image diameter range: 100mm-250mm, min. cliché print image dimensions X/Y: 100mm/210mm, max. cliché print image dimensions X/Y: 250mm/280mm, ink cup diameter: approx. 80mm, pressing force range: 1100N-1500N, max. cycle rate: 1400-1800 cycles/h, machine dimensions X/Y/Z: approx. 1050mm/500mm/650mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible.
Bernardo Specifications Cutting range around 90° 125 mm Cutting area flat 90° 100 x 150 mm Cutting range around 45° 95 mm Cutting area flat 45° 95 x 76 mm Cutting range around 60° 50 mm Cutting area flat 60° 50 x 56 mm Working height 730 mm Saw blade dimensions 1638 x 13 x 0.65 mm Cutting speeds 23 / 34 / 54 m/min Engine output S1 100% 0.55 kW Motor input power S6 40% 0.75 kW Voltage 230 V Machine dimensions (L x W x H) 1000 x 550 x 1100 mm Weight approx. 68 kg
table length: 2400 mm table width: 1200 mm table height (lateral area): 200 mm weight: 981 kg dimensions of the machine ca.: 2400 x 1200 mm SIEGMUND Authorized Dealer - All items available! SPECIAL OFFER SIEGMUND Welding Table Retro 2400x1200x200 incl. accessories Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole Ø 28 mm - Holes surface 100x100 mm grid - Corners, edges, and holes rounded - Side panel height 200 mm - Side panel holes in diagonal grid - Construction reinforced with ribs - Grid lines enable precise assembly The welding tables are equipped with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Features: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version with scale - Includes ...
Rated power: 75kW, max. operating overpressure: 8.5bar, speed: 3000rpm, operating hours: 75122h, load hours: 72719h. The machine requires bearing replacement. Documentation available. An on-site inspection is possible.
used
7 assen: Y1 /Y2 / X / Z1 / Z2 / R1 / R2 Amada-bombardement Capacity: 125 ton x 3100 mm Backgauge: CNC Control: Delem DA65R Passage between uprights: 2600 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Length: 3245 mm Depth: 1940 mm Height: 2415 mm Weight: 7,7 ton
Deck Oven Miwe Condo C-3-1208 Miwe Condo Model: Type: CO.3.1208 Bottom heat and top heat can be controlled individually Chassis mobile with brake Connection 400V, 3 x 16A-CEE plugs Water connection 3/4 inch, water drain DN 40 Dimensions: 1500 x 1300 x 1950 mm, WxDxH Used oven
Spiral mixer Diosna SP 120 D Diosna Model: SP 120 D Kneading machine mobile 2 timers, 2 gears Stainless Steel Boiler Flour dust hood for max. 120 kg dough Dimensions: 800 x 1270 mm WxD Connection: 400 V, 32A-CEE plug Used machine cleaned Option: Maintenance contract Service Package E-Box for more security! Delivery Instruction & Commissioning
Key data: 430 mm, 1260 mm
Control MORI SEIKI ... MSX-850 MAPS II Turning diameter ... 430mm Turning length ... 1260mm Inclined bed Axis Y ... +- 60mm Spindle bore ... 105mm powered tools ... 10 Axis X ... 280mm Axis Z ... 1370mm Circumferential diameter over bed ... 995mm Circumferential diameter via support ... 825mm Spindle speed ... 1-3000 rpm Axis C ... 0,001° Motor power of driven tools ... 5.5kW Main engine power ... 25/30kW Max. spindle torque ... 1000/1300Nm Machine weight... 8100kg L x W x H ... 4532x2291x2390mm The machine is in good condition, possible to test under power.
A non-automated BITO pallet racking system is available. Bay width: 3600mm, max. shelf load capacity: 2300kg, shelf spacing: 1725mm, upright type: P20, load carrier: Euro pallet, pallet dimensions X/Y: 1200mm/800mm, pallet weight: 500kg, max. bay load at 1725mm buckling length: 16000kg. Documentation available. An on-site inspection is possible.
gear hobbing diameter - external: 1200 mm gear hobbing diameter - internal: 1200 mm gear hobbing width -max.: 260 mm control: Liebherr PC-NC max. workpiece diameter: 1500 mm table diameter: 900 mm table bore diameter: 320 mm max. table load: 95 kN power capacity: 30 kW coolant pump: 120 l/min Axial distance between thrust spindle - table: 0-820 mm Shaping spindle diameter: 125 mm tool taper: SK 45 DIN weight of the machine ca.: 26 t dimensions of the machine ca.: 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BANDERA BLOWN FILM EXTRUDER, for PE, Bandera extruder with screw diam.90 mm., 250 mm die diam. on original Bandera head, reconditioned (not the one in photo), a.c. drive with inverter, calibrator, haul off unit, corona treatment, single color small printing group, single winding station with manual discharge 1.200 mm., good overall conditions, availability: immediate, working width: 1.200 mm., conditions: good
Equipment consists out of: 1 - decoiler tower with 4 decoilers gt; capacity per decoiler: 3 ton
thickness of jaw: 125 mm tension force: 40 kN machine weight ab.: 40 kg range L-W-H: x x x mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Besturing: Siemens Sinumerik ( achteraf ingebouwd) Worklength with magnetic table: 2000 mm Grindingwidth: 1250 mm Longitudinal travel X-axis (autom.): 2000 mm Cross-travel Y-axis (autom.): 1250 mm Travel Z-axis (autom.): 1200 mm Dimensions of the table: 1250 x 1250 mm Dimensions magnetic table : 1250 x 1250 mm Motorpower: 30 kW Cooling system: yes
Transnorm conveyor belt GF 1200-600-500 RA2424 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,85 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor spe ...
Kemper Spiral Mixer Type: SP 125 A Specifications: 2 Automatic timer switching on and off 2 speeds slow and fast with 3 stainless steel boilers Stainless Steel Boiler and Spiral with flour dust cover square head Boiler capacity approx. 250 litres Machine has been overhauled and repainted Electronics new All bearings new All belts new Friction wheel new Wear parts all new Engine mounts all new New button Wheelchairs new Hydraulic oil new completely repainted
Reference Num.: 4242 Brand: Xerox Type: Nuvera 120 EA Impressions: 10 mio Available: directly Status: Not in production Location: Deutschland
Subject to prior sale - errors possible! Internal reference number: D-1143-5
used Forstner slitting line, control left, 0-line right, with motorized cross shear, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run was carried out. Working width: 250 - 1250 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminium: 1.5 mm Colour: blue/yellow Total power requirement: 400 V Machine weight: 775 kg Dimensions: 1500 x 2200 x 1500 mm Coil weight: 2 t without straightening rollers Number of blades: 5 pairs Knife shaft diameter: 100 mm Speed: 25 m/min without bevel cut Coil width (max.): 1250 mm Maschinennummer/Machine number 102728 MST
Gantry type longitudinal planer SN: 185090406.; Working table dimensions 4180 x 1100 mm. Power supply 380 V.
GAMMAMECCANICA TANDEM SYSTEM 125 mm. 950 kg/h double screening, Throughput rate up to 600-950 kg/h ca, depending on material and feeding rate (0,30-0,40 Kwh/kg), Line suitable for the recycling for heavily printed, high humidity and contaminated materials., High performance degassing chamber for removal of up to 10 times more gas and humidity in the melted material compared to other systems (so you can save on the cost of an agglomerator), The line includes :, Loading conveyor belt, tunnel metal detector, automatic compactor, N.2 Dosing unit for masterbatches and more, 1st extruder with 125 mm. screw Ø 28 L/D, 1st degassing point, FIMIC RAS 500 fully aumatic screenchanger, control cabinet, 2nd extruder with 140 mm. screw Ø 18 L/D, 2nd degassing point, BD-PLAST non-stop screen-changer, TDA6 GM water ring pelletizer, heat exchanging unit, vibrating screen, blower, Water treatment unit , ...
Rack oven for rack trolleys 60/100 digital BSC 40 controller with ramp with Vario Pilot with gas burner - Bakery condition not cleaned
Conveyor belt - climbing belt 35 m Manufacturer Horstmann ? Length approx. 35000 mm Belt width 1200 mm Smooth belt troughed. Discharge height approx., 8000 mm Side protection and reinforcement in the feed area Roofing in the wider area. Control box and control In good condition Net price From location 12,000,-- euros I offer as an intermediary on behalf of the owner. The information is non-binding, the prior sale is reserved. Dismantling, loading and shipping on request! I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp)
Size: 800 x 1200 mm Equipments: Good condition without any damage Maximum stacking height: 1350 mm Minimum stacking height: 650 mm Platform width: 1250 mm
table length: 2400 mm table width: 1200 mm table height: 850 - 900 mm weight of the machine ca.: 0,65 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck is not included. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
