129,012 used machines on RESALE, but how to find them? Machine Search
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 1200 mm -Piston rod: Ø 85 mm -Operating pressure: 200 bar -Pressure load: max. 10 t -Quantity: 2x cylinders available -Price: per piece -Dimensions: Ø 118 x 1860 mm -Weight: 118 kg/pc.
Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Donaldson, air filter type P 10-1234 in original packaging -Quantity: 5x air filters available -Price per piece -Dimensions packaging: 260/260/H285 mm -Weight: 1.8 kg/pc.
Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 3.6 m -Roll width: 1200 mm -Roller diameter: 83 mm -Roller spacing: 200 mm -Dimensions: 3600/1220/H265 mm -Weight: 206 kg
Time relay, safety time relay, safety control, timer, timer -Manufacturer: Grässlin, timer unused in original packaging -Type: talento 121 01.28.0003.1 -Voltage: 220-240V / 50Hz -Quantity: 5x timer available -Price per piece -Dimensions of box: 95/60/H85 mm -Weight: 0.2 kg/pc.
Punching tool, punch, scraper, hold-down device -Handover: in current condition as seen -Bracket: Damage see photos -Scraper: hold-down device for punching -Receptacle: Ø26/22 x 210 mm -Dimensions: 315/125/H95 mm -Weight: 4.2 kg
mobile workbench, folding workbench, work table, assembly bench -mobile workbench: solid design -Width: 1240mm -Depth: 800mm -Height: 840mm -Weight: 56 kg
Data light barrier, retro-reflective light barrier, light barrier, optical data transmission -Manufacturer: Lenze, optical data transmission data light barrier -Type: DDLS 200/120.2-10 -Voltage: 18-30V DC -Dimension: 190/85/H110 mm -Weight: 1.2 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 9 pieces -Tool angle: 35° -Dimensions: see drawing in the photos -Dimension: 26 x 120 mm -Total length: 835 mm / 1x 400/170/100/50/40/30/20/15/10 mm each -Total weight: 11 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 5 pieces -Tool angle: 35° -Dimensions: see drawing in the photos -Dimension: 26 x 120 mm -Total length: 1615 mm / 1x 670/465/250/170/60 mm each -Transport dimensions: 720/220/H50 mm -Total weight: 24 kg
Workbench, work table, assembly bench -Workbench: with drawers/cabinet door, solid design -Width: 1240mm -Depth: 700mm -Height: 850mm -Drawers: 3 -Cabinet door: 1 -Weight: 102 kg
Globoidal cam gears, indexing, oscillator indexer, index gear -Manufacturer: Manifold, Transmission Clutch Indexing -Type: V-1-C 5 120 -Shaft: Ø 48 x 145 mm -Indexing angle: 120° -Number of stops: 5 -Dimensions: 400/385/H395 mm -Weight: 151kg
Transnorm conveyor belt GF 1200-700-600 RA2187 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyo ...
-Spiral mixer Boku SK 120 AK -Manufacturer: Boku -Type: SK 120 AK -without boiler - Machine is for kettle 120 kg dough -with 2 automatic timers - with flour dust safety cover -2 speeds
-Spiral mixer Diosna SP 120 D -Type: SP 120 D -mobile -for max. 75kg flour or for max. 120kg dough -with 2 automatic timers -Boiler diameter 75cm -Boiler capacity approx. 180 liters -Machine mobile on castors with a swivel castor -Locking by 2 brakes -Spiral and kettle made of stainless steel -400 volt frequency 50 Hz -Weight of the machine approx. 550 kg -Boiler capacity: 180 liters
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 4 pieces -Tool angle: 40° -Dimensions/lengths: see drawing in the photos -Transport dimensions: 1000/130/H70 mm -Total weight: 32.1 kg
Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1200 x 305 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 40/10 mm -Gratings: Hot-dip galvanized -Quantity: 1x grids available -Weight: 13 kg
• Type: VMS 350 • Machine No.: 2934/2 • Sawing speeds: 17/34 m/min. • Mitre: up to 60° right • Stop: approx. 1000 mm • Power: 3x400V, 50Hz/5A • Dimensions (LxWxH): 700 x 700 x 1800 mm • Weight approx: 350 kg • Year of construction: 2001 • In operation since: 1.3.2002 • Accessories: stop approx. 1000 mm, saw blades and cooling water pump
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Total length: 1250 mm -Shots: M10 -Quantity: 1x transport rollers available -Dimensions: Ø 60 x 1250 mm -Weight: 5,7 kg
Thickness gauge, coating thickness gauge -Manufacturer: PCE, thickness gauge with case -Type: PCE-CT 27FN -Measuring range: 0 - 1250 µm -Accessories: see photos -Dimensions: 250/210/H55mm -Weight: 0.7 kg
Transport trolleys, platform trolleys, transport trolleys, table trolleys, assembly trolleys -Manufacturer: Krieg, table trolley with 4 shelves -Load capacity: kg -Chassis: 4 swivel castors -Dimensions: 1200/700/H1210 mm -Weight: 62 kg
Shelving trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving -Shelf trolley: with 6 levels. Writing tray and filing wall -3 levels: with wooden insert -Chassis: 4 swivel castors, with brakes -Total dimensions: 1260/430/H2110 mm -Weight: 93 kg
-2 lifting mixers with extendable stainless steel kettle -2 machines with 4 boilers -Manufacturer: Emil Kemper GmbH Conversion of Meyma -Model: F125ALS -a cauldron for max. 125 kg of flour or for max. 200 kg of dough -with 2 speeds -optionally also with lifting tipper
castor, swivel castor, transport equipment castor, fixed castor, heavy-duty castor -Swivel castor: with lock/brake -Wheel: Ø 125 mm -Width: 32 mm -Hole spacing: 78 x 60 mm / Ø 10 mm -Number: 216x swivel castors available -Price: per piece -Dimensions total: 175/80/H155 mm -Weight: 1.1 kg/piece
Locking hook, tensioning hook, cabinet hook, closure hook, locking bar, folding bar lock -Locking lever: Folding lever unused -Number: 512 hangers available -Price: per piece -Minimum order quantity: 10 units -Dimensions: 120/45/H20 mm -Weight: 0.2 kg/pc.
Spiral Kneader Dough Machine Diosna Model: SP 120 A with extendable tank wagons Kneading machine for max. 120 kg dough Cover with timer and 2 gears Lifting and lowering via control Connection 400V, 16A-CEE plug Used machine for export More spiral mixers in stock!
Bezel, steady rest, lynette -Bezel: max. opening Ø 128 mm -Centre height: 200 mm -technical drawing: in the photos -Total dimensions: 650/80/H420 mm -Weight: 28 kg
Gearbox, bevel gear, worm gear -Gearbox: Worm gear ratio: i = 7.5 -Shafts: Ø 14 x 34 mm / see photos -Dimensions: 122/105/H140 mm -Weight: 4.2 kg
Gearbox, bevel gear, worm gear -Gearbox: Worm gear Ratio: i = 16 -Shafts: Ø 7 x 25 mm / Ø 10 x 35 mm -Dimensions: 100/107/H96 mm -Weight: 0.7 kg
Transnorm roller conveyor TS 2800 sorter switch 1980-1250-1150 RA1999 Make: Transnorm Roll width (RB): 1150 mm Nominal/outer width (NB): 1250 mm Length: 1980 mm Diameter rollers: 50 mm distance between rollers: 76 mm Roller conveyor motor: 2x SEW drive motor Angle of the rollers is adjusted pneumatically (see pictures) conveying speed: approx.1,73m/s maximum recommended box/package width: 400 mm Theoretical sorting speed at 600 mm crate length: ca. 4250/h Included: Side guide included on one side Control valve Optionally available: Supports Side guides on both sides Conversion to box width up to 500 mm Barcode scanner Control system (stand-alone unit) System optimization (e.g. replace valves, dual solenoid valve, forward conveyors, frequency converter) for higher flow rate 6000 and more Translated with
Control: Heidenhain Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine
Control: Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine has spindl
clutch, power clutch, gear clutch, transmission clutch -Clutch: Gear clutch with duo sealing rings -Hole shaft: Ø 125 x 125 mm -Flange: bolt circle Ø 265 x 13 mm -Dimensions: Ø 294 x 125 mm -Weight: 26.8 kg
clutch, power clutch, gear clutch, transmission clutch -Clutch: Gear clutch with duo sealing rings -Hole shaft: Ø 125 x 125 mm -Flange: bolt circle Ø 265 x 13 mm -Dimensions: Ø 294 x 125 mm -Weight: 27,1 kg
clamping rail, guide rail, support rail, stop rail -Mounting rail: with T-slot -Length: 1200 mm -Groove width: 15 mm, dimensions see photo technical drawing -Dimensions: 1200/80/H30 mm -Weight: 18.4 kg
ID2955 Key Maker Magic 1211 year/Year of construction 1984 Manhole finisher, 1 piece Magic 1211, with 2 Atlas 300 + 400 molds, 2 palisade molds, 1 built-in mold, 1 vibrator incl. FU, various base sleeves Shaft paver, 1 piece Magic 1211, with 2 pieces of moulds Atlas 300 + 400, 2 pieces of mould palisades, 1 piece of mould installed, 1 piece of vibrator incl. FU, various lower sleeves
strapping machine, packaging machine, strapping device, strapping set, unwinding trolley, strap dispenser, cutting stand, vertical cutting stand -Manufacturer: HAVA, cutting stand cutting device on mobile base frame -Cutting width: up to 1250 mm -Roll diameter up to 850 mm -Dimensions: 1655/730/H1150 mm -Weight: 22 kg
MALMEDIE DIE Adjustable drawing speed with inverter • Minimum worked diameter 15 mm • Maximum worked diameter 25 mm • External dimension coils 1,250-1,300 mm • Internal dimension coils 800-900 mm • Length 700-1,300 mm • Weight 1.500 Kgs • Wire surface treatment bonderized with soaped • Tensile resistance approx 500 N/mm2 The drawing machine normally work the raw material over mentioned with the follow specification: • Number of drawing passage 1 • Drawing die sizes 120x45 mm • Lubricant now used oil • Max area reduction 6 to 8 % • Drawing speed adjustable with inverter
housing screw connection, screw-in screw connection -Cable gland: 2 pieces -Type: LMZ 27.9-127-G1 -Price/Delivery: complete -Dimensions box: 115/110/H65 mm -Weight: 0.2 kg/piece
Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Manufacturer: Steinmeyer, micrometer -Measuring range: 125-150 mm -Reading: 0.01 mm -locking device -other sizes: also available -Case dimensions: 335/180/H30 mm -Weight: 0,9 kg
Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Micrometer: outside micrometer -Measuring range: 100-125 mm -Reading: 0.01 mm -locking device -other sizes: also available -Case dimensions: 315/160/H30 mm -Weight: 1.0 kg
Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, pull-down clamp -Manufacturer: WILA, stable clamping jaw height adjustable -Clamping jaw: 120 x 45 mm -Clamping height: 85 - 105 mm -Groove width: 28 mm -Dimensions: 240/120/H90 mm -Weight: 10.6 kg
tool holder, milling holder, milling tool, adapter, intermediate sleeve, extension adapter -Manufacturer: Sandvik Coromant, milling adapter Ovp -Type: C8-391.01-80 125A -Mounting diameter: 80 mm -Functional length L: 125 mm -Transport dimensions: Ø 80 x 173 mm -Weight: 4.5 kg/total
power converter, power supply, power pack, switching power supply, power supply module, DIN rail power supply -Manufacturer: Mean Well, switching power supply DIN rail type WDR-120-24 -Input: 200-500 V AC 50/60 Hz 1.4 A -Output: 24 V 5A -Dimensions: 130/40/H125 mm -Weight: 0.6 kg
Key data: 1 t
Machine Type: Toggle Press Manufacturer: Schmidt Type: 14R-08-2007 Year of construction: 2007 Weight: approx. 23kg Force max. 12KN Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 590 Euro incl. 19% VAT Location Warstein , Germany Reference M-SCH-SCH-0623-9 DESCRIPTION We offer you a used toggle lever press from the manufacturer Schmidt. A further 54 presses are on offer. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!
ring cutting machine, cutting device, cutting pliers, cutting machine, ring, disc, segment and strip cutting machine, ring cutting machine -Manufacturer: Klinger, ring cutting machine -Cutting range: 80 - 1250 mm -Cutting thickness: up to 9 mm -Dimensions total 1100/170/H280 mm -Weight: 6.4 kg
Transnorm belt conveyor belt conveyor 1252-600-500 gate passage RA2049 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1251 mm nominal/outer width (NB): 600 mm 735 with barings belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 110 mm Motor type: Van der Graaf drum motor Motor power: kW 0.25 230/400 V 50Hz Conveying speed: 1,25 m/s Scope of delivery: without supports (if required, please ask) Optional: Supports with dempers Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. ...
Transnorm belt conveyor 1200-600-500 RA1987 Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1200 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW-Eurodrive Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,6 m/s Weight: 60 kg Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: 1,6 scope of de ...
Offer 23443 Specifications: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30° - Cutting gap adjustment by hand - Projection 200 mm - Man.- Back gauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirements incl. back gauge -ca. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg
Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Collated Fasteners, strip nails 1 box/ 1400 pieces -Type: SNK 2266 3.8 x 120 mm -Price/Delivery: complete -Transport dimensions: 380/200/H130 mm -Total weight: 15.4 kg
maximum number of results exceeded
please refine your search
