mtu 12 v used for sale

width of the strips: 25 mm band length: 762 mm dimensions of grinding wheel: 125 mm Table tiltable up to: 45 Grad table surface area: 130 x 130 mm connected load frequency: 230 V total power requirement: 0,3 kW weight of the machine ca.: 9 Kg dimensions of the machine ca.: 650 x 360 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1250 kg Working height minimal: 540 mm Working height maximum: 1120 mm table diameter: 800 mm swivelling range: --> 95 Grad max. torque: 490 Nm table rotation speed: 2 U/min Working height from to: 540 - 1120 vertikal mm Working height from to: 700 - 1280 horiz. mm total power requirement: 2,53 kW weight of the machine ca.: 757 kg dimensions of the machine ca.: 1,76 x 1,63 m Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 125 mm spindle bore: 27 mm taper in dividing head spindle: MK 4 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal dividing head WALTER mounted on a SINUS-table WELK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 15 kW weight of the machine ca.: 4,6 t dimensions of the machine ca.: 1850 x 1550 x 1685mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

conus taper: 0 mm with milling disc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over slide rest: 940 mm turning length: 10000 mm turning diameter: 1250 mm spindle diameter: 105 mm speed: 1,6 - 315 (x24) m/min voltage: 380 V total power requirement: 75 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw faceplate Power compound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centrifugal pump Manufacturer: Siemen & Hinsch Type: AKHE 1202 Item #: BN 08424 Power: 1.75/0.8 kW LBH: 880 x 500 x 1050 mm 2 copies in stock

grinding diameter: 1400 mm grinding length: 3500 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310013 Type of machine Super finishing machine Make NAXOS UNION Type WT 140/3500 Build in 1975 Max. grinding diameter 1400 mm Max. grinding length 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 521 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 392 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 408 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine DECKEL MAHO DMG 125

saw blade diameter: 1250 mm cutting diameter: 380 mm cutting range: 480x320 mm motor speeds:: 3000 U/min feed speeds: 1000 mm/min main drive motor: 112 kW chip conveyor: cutting speed: 10-265 m/min total power requirement: 125 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 544 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Power [PS]: 61; Gross weight [kg]: 4000; Accessories: Tanker, Battery, Control Panel, Stahldach, Input: AC socket: 3P/5W, 1x125kW - DC socket: 1x50kW - AC socket: 3P, 1x60kW, Output: AC socket: 3P/5W, 1x125kW; Water Tank Volume [l]: 300

MEGAPLOT XTR PRO 1200 CNC foam cutting machine was built in 2020 in Poland by Megaplot J.Wójcicki M.Jagła SJ. The machine enables precise cutting of any shape in a wide range of rigid foams, soft foams and rockwool. Cutting is performed fully automatically by means of an endless wire, which accelerates to a speed of 280 km/h. Project files, including shapes and their layout, can be prepared in any graphics program (CorelDraw, AutoCAD etc.). This is because the advanced FastWire software supports all major file formats. The MEGAPLOT XTR PRO upholstery foam cutting machine is also equipped with a controller which enables simulation of the cutting process and setting of the machining parameters with their change during the cutting. All this makes the offered machine an excellent choice for businesses producing, among others, insulation elements, packaging and upholstered furniture. Tec ...

Head type: 3-SH/60-125-PE/T (DeCo) ​Marke/ Brand: UES Condition: New/ New Layers : 2 Center distance: 125 mm Nozzle/ Die: 60 mm Hoses/ Parisons: 3 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No

Head type: 2-BKD-51-125 (A 70) ​Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Center-distance: 125 mm Nozzle/ Die: 51 mm Hoses/ Parisons: 2 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No

Vertical Machining Center YCM XV 1250 A - Fanuc MPX 100 i Control -CE marking -Fanuc MXP 100i control -4th axle prepared -Year of construction 2008 / 1x previous owner very well maintained / original paint -Travel X / Y / Z 1270x520x540mm -Rapid traverses X / Y / Z 36m/min / 36 m/min / 24 m/min -Feed speeds approx. 945 IPM (inches per minute) -Distance - table surface to spindle nose 100-645mm -Work table 1350 x 520mm -Max. table load 1000 KG -Spindle speeds up to 10000 rpm -Spindle holder BT 40 -Spindle motor power 11.2 KW - Tool Changer (ATC) 24 stations / side mount type -Tool change time 3.5 se. (T-T) -Electric handwheel -RS 232 interface -Various tool holders -Chip conveyor -Spindle oil cooler -High pressure pump -Oil skimmer -Work light -Machine feet -Machine documentation Dimensions: L x W x H 3.5 x 2.4x2.2 meters / Weight 7000 Kg

Weight: 870 kg Motor output: 15 kW : 12,500 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pdf description attached

Reference Num.: 3604 Brand: Horizon Type: Collator AC-1200 Available: directly Status: In production Location: Deutschland

Machine Details Stock-No. 1105-03435 Type of machine Bed Type Milling Machine - Universal Make LAGUN FBF 1200 Type HEIDENHAIN TNC 335 Year of manufacture 1991 Type of control CNC Storage location HAGUENAU Country of origin SPAIN Delivery time IMMEDIATELY Freight basis EX STOCK Price Technical details x-travel 1100 mm y-travel 600 mm z-travel 600 mm surface area 1200X 550 mm turning speed range: 50-3000 TR/MIN power capacity 20 kW control TNC 355 HEIDENHAIN Additional information CNC CONTROL HEIDENHAIN TNC 355 IN PERFECT WORKING CONDITION

RECONDITIONED KRAUSS MAFFEI KM 125 ATEX CENTRIFUGE REF.: C3553 Vertical basket bottom discharge reconditioned centrifuge with scraper on inertia plate with 4 dampers discs type ZPVL 25-45.6 Type KM 125 manufactured by KRAUSS MAFFEI. AISI 316L wetted parts. General characteristics: Manufactured by KRAUSS MAFFEI Model KM 125 Type Vertical basket bottom discharge centrifuge with scraper Material Stainless steel 316L Weight 6400 kg Technical characteristics: Download Por el fondo con rascador Basket diameter 1.250 mm Height basket 650 mm Max. load 650 kg Useful load 500 dm3 Max. rotational speed 900 rpm Engine 37 kW - 50 cv

SANDRETTO MEGA T 1200

; Gross weight [kg]: 818; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including: 125 liter fuel tank capacity; Water Tank Volume [l]: 125

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min. Drive speed: 1500 rpm. Drive power: 75 kW with AC motors ACM 208S 75 kW electric motor, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,800x900x1,450 mm Weight: approx. 1,230 kg Year of construction: 2015 Condition: in very good used condition.

King Regius Spiral Kneader Type: SP 125 Spiral kneader extendable with 2 stainless steel boilers digital film control with emergency off for max. 125 kg dough content per kettle Stand-up machine 400 Volt high current connection 2 Speeds Flour dust cover Year of construction 2004

Machine Type: Honing Machine Manufacturer: Pemamo Type: MDR 120 E Year of construction: 1999 / Commissioning 2003 Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 2.850 Euro incl. 19% VAT Fixed Price Location Warstein , Germany Reference number M-PEM-0126 DESCRIPTION We offer you a used honing machine from the manufacturer Pemamo. Incl. adapters 1040-510 and 1040-11-20 see last picture With fine adjuster. Weight: 135kg Further dates will follow. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

Gebr. Stikkenofen W&P Rototherm REC 1280, overhauled, gas-heated, with gebr. Gas burner, with touch control

NJP-1200C automatic capsule filling machine was built in 2022 in China by Guangdong Rich Packing Machinery Co., Ltd. Machine in very good condition, kept in a temperature and humidity controlled room. All moving parts were systematically lubricated according to the manufacturer’s recommendations. The NJP-1200C capsule filling machine is used in the pharmaceutical industry for mass production of medical products, i.e. drugs, supplements, etc. It enables fully automatic filling of hard capsules of size 00 and 0 with products in the form of powder or small granules. In one working cycle, empty capsules are fed, sorted, filled and sealed. The reliable design made of high-quality stainless steel meets stringent sanitary requirements, as well as maintaining high stability throughout its entire service life. All this makes the offered capsule filler an excellent choice for increasing the e ...

Complete Chonglee High tenacity yarn ( Both PET and PA) spinning lines available for sale, manufactured by Chonglee in 2012, consist of 7 individual line, 4/8 ends winder, chuck length, 1200mm, 4/8 ends changable,10 / 8 hot godets, each pos. has 8 packs & spinnerets, 90mm,5.0 meter, can spin 400-1500d yarn, strength 9.2-9.5 gpd, Total 27 positions. from extruder to winder. Stopped 2 months, just complete refurbished last year, very good condition, can be soldl separately; A. line: with 6 pos, 150mm extruder, 10 godets B. line with 4 pos., 135mm extruder, 10 godets C. line: with 4 pos.135mm extruder, 10 godets D. line: with 1 pos.105mm extruder, 10 godets E. line: with 6 pos.150mm extruder, 8 godets F. line: with 3 pos.120mm extruder, 8 godets G. line: with 3 pos.120mm extruder, 8 godets Serious buyer contact us. serious buyer contact us.

Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition

SUITABLE FOR PRINTING: BOPP, PP ,CAST, ALU, LDPE, NYLON, PETP, OPA, Paper, PE, CPP, BOPET BOPP: 10 - 100 microns CPP: 20 - 100 microns PET: 12 - 80 microns Printing Width: 1200 mm Web Width: 1300 mm Printing repeat: max 800 mm, min 350 mm max roll diameter: Unwinder: 1000 mm. Rewinder: 1000 mm. Drying System: electrical Ink type: solvent, Water base System: sleeved , Geared, Sleeve Width 1300 mm 35 - 5 pcs 38 - 6 pcs 40 - 6 pcs 45 - 6 pcs 48 - 4 - pcs 50 - 6 - pcs 55 - 6 - pcs 60 - 6 - pcs 66 - 4 pcs 69 - 5 pcs Anilox : 300 - 2 pcs , 220 - 2 pcs, 120 - 1 pcs, 100 - 1 pcs.

The machine is in good technical condition, after prior agreement it is possible to test it. - Nominal forming force: 120 t Working length: 3106 mm CNC control Delem (graphic 2D programming) Automatic calculation of bending sequence and collision detection Back gauge X axis with 2× manually adjustable stop fingers CNC electromotive height adjustment of the back gauge (R axis) CNC electrically controlled table deflection Upper tool adapter ROLLERI Equipment and accessories: - Front protective device (tilting door) - Rear protective device (sliding door) - 1× freely movable two-hand / foot control - Operating instructions including CE declaration

Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

Current stock: approx. 350 pcs. Included in delivery are: 01x Bockrolle, used Material color roll: black Material color frame: sendz. galvanized Specifications: Total height: approx. 155 mm Rolls Ø: approx. 125 mm Roll width: approx. 37.5 mm Roll material: Solid rubber Rim material: Polypropylene Plate abbreviation: approx. 100 x 90 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.803 kg

Flour scale Chronos 50 kg good condition

2 x Pallet trucks, Electric pallet trucks with standing platform, Electric pedestrian pallet truck 2 to., Jungheinrich, ERE 120 – used - : Price per piece from location: Pos 6: 2.250.-€ (net)! Pos 5: 3.950.-€ (net)! Manufacturer: Jungheinrich Type: EUA 120 Year of construction 2020 Load capacity: 2,000 kg Maximum stroke up to 122 mm Load center of gravity: 600 mm Travel speed: 9 km/h without load Lifting speed: without load 0.04 m/s Battery voltage: 24 V Battery capacity: 250 Ah Weight incl. battery: 630 kg Overall length: 1,847 mm Operating hours: see list, as of January 2026 – a few hours have been added in each case Incl. charger Condition: good Available: immediately Location: Erfurt, later Augsburg camp Pos 6 / 5 / more photos of the other devices on request! BRA 1/26 Year of construction ERE01 98285577 Pallet truck EUA 120 9.600 2020 ...

EUROMAC STX Flex 12 1250/30-2500 punching machine was built in 2019 in Italy by Euromac S.p.A.. The machine is designed for precision machining of both thick and thin sheet metal. All machining processes, i.e. punching, nibbling and marking, are performed with a force of up to 30 tonnes on a large brush table. Its design prevents scratches and scrapes on the sheet metal surface and significantly reduces noise levels. All tools are stored in capacious stations, three of which are 360° index stations. The high number of tool strokes per minute, reaching up to 2000/min, allows, in turn, maximum production efficiency during even the most intensive challenges. All this is complemented by an advanced industrial controller that allows even the most advanced programmes to be created in just a few steps. The EUROMAC STX Flex 12 Hybrid 1250/30-2500 CNC punching machine weighs 9500 kg. Technica ...